-
Notifications
You must be signed in to change notification settings - Fork 3
Hardware Builds
Every board the GTi family runs on. All flashable from the browser flasher; building from source is documented per-folder in the repo.
| Board | Display | Status | Notes |
|---|---|---|---|
| Guition JC3248W535C | 3.5" 480×320 IPS touch | ✅ Current — recommended | The main GTi. Standalone + wireless. Community 3D-printed cases exist. Source: firmware/Gotek_JC3248/ + BUILDING.md
|
| Waveshare 7" (ESP32-S3-Touch-LCD-7) | 7" 800×480 RGB | Beta / maintenance | Big-screen build on a custom render engine. Landscape only. firmware/Waveshare_7inch/
|
| Waveshare 2.8" (ESP32-S3-Touch-LCD-2.8) | 2.8" 320×240 | Legacy | Last LovyanGFX-based build. firmware/Waveshare_28/
|
| CYD (ESP32-2432S028R) | 2.8" 320×240 | Legacy |
Wireless-only remote — no USB disk role. Several versions behind the current feature set; works, but don't expect the modern niceties. firmware/CYD/
|
| Board | Status | Notes |
|---|---|---|
| ESP32-S3 Super Mini | ✅ Preferred | Cheapest, onboard antenna, no extras needed. firmware/SuperMini-S3/
|
| Seeed XIAO ESP32-S3 | Supported | The original dongle; drives a status OLED; needs its external antenna attached. firmware/XIAO/
|
A dongle plugs into the Gotek's USB-A port, receives disk images from a screen over WiFi, and presents them to the Gotek as a USB drive. One dongle per machine; a screen can know several and you choose who to feed.
Any Gotek running FlashFloppy (the standard open firmware). The GTi talks to it purely as a USB drive — no Gotek modification, no wires soldered, nothing voided. Unplug the GTi and your Gotek is exactly as it was.
Everything is off-the-shelf. A complete ready-to-run kit (flashed screen, printed case, wireless dongle, leads, SD card) is available built to order — GBP 50 delivered: PayPal mesarim@hotmail.com with your postal address in the payment note. Or source the parts and build your own — the repo tells all.