WWSTCERT-8242 Add support to frient heat detector

drivers/SmartThings/zigbee-smoke-detector/fingerprints.yml

@@ -34,6 +34,11 @@ zigbeeManufacturer:
     manufacturer: frient A/S
     model: SMSZB-120
     deviceProfileName: smoke-temp-battery-alarm
+  - id: "frient/HESZB-120"
+    deviceLabel: frient Heat Detector
+    manufacturer: frient A/S
+    model: HESZB-120
+    deviceProfileName: heat-temp-battery-alarm
   - id: "Heiman/Orvibo/Gas3"
     deviceLabel: Orvibo Gas Detector
     manufacturer: Heiman

drivers/SmartThings/zigbee-smoke-detector/profiles/heat-temp-battery-alarm.yml

@@ -0,0 +1,55 @@
+name: heat-temp-battery-alarm
+components:
+- id: main
+  capabilities:
+  - id: temperatureAlarm
+    version: 1
+    config:
+      values:
+        - key: "temperatureAlarm.value"
+          enabledValues:
+            - heat
+            - cleared
+  - id: temperatureMeasurement
+    version: 1
+  - id: battery
+    version: 1
+  - id: firmwareUpdate
+    version: 1
+  - id: refresh
+    version: 1
+  - id: alarm
+    version: 1
+    config:
+      values:
+        - key: "alarm.value"
+          enabledValues:
+            - off
+            - siren
+        - key: "{{enumCommands}}"
+          enabledValues:
+            - off
+            - siren
+  categories:
+  - name: TempSensor
+preferences:
+  - preferenceId: tempOffset
+    explicit: true
+  - name: "tempSensitivity"
+    title: "Temperature Sensitivity (°C)"
+    description: "Minimum change in temperature to report"
+    required: false
+    preferenceType: number
+    definition:
+      minimum: 0.1
+      maximum: 2.0
+      default: 1.0
+  - name: "warningDuration"
+    title: "Alarm duration (s)"
+    description: "After how many seconds should the alarm turn off"
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 65534
+      default: 240

drivers/SmartThings/zigbee-smoke-detector/src/frient/init.lua

@@ -21,6 +21,7 @@ local cluster_base = require "st.zigbee.cluster_base"
 local Basic = zcl_clusters.Basic
 local alarm = capabilities.alarm
 local smokeDetector = capabilities.smokeDetector
+local temperatureAlarm = capabilities.temperatureAlarm
 
 local IASWD = zcl_clusters.IASWD
 local IASZone = zcl_clusters.IASZone
@@ -72,7 +73,14 @@ end
 
 local function device_added(driver, device)
   device:emit_event(alarm.alarm.off())
-  device:emit_event(smokeDetector.smoke.clear())
+
+  if device:supports_capability(capabilities.temperatureAlarm) then
+    device:emit_event(temperatureAlarm.temperatureAlarm.cleared())
+  end
+
+  if device:supports_capability(capabilities.smokeDetector) then
+    device:emit_event(smokeDetector.smoke.clear())
+  end
   device:send(cluster_base.read_manufacturer_specific_attribute(device, Basic.ID, DEVELCO_BASIC_PRIMARY_SW_VERSION_ATTR, DEVELCO_MANUFACTURER_CODE))
 end
 
@@ -111,14 +119,28 @@ local info_changed = function (driver, device, event, args)
 end
 
 local function generate_event_from_zone_status(driver, device, zone_status, zigbee_message)
-
    if zone_status:is_test_set() then
-      device:emit_event(smokeDetector.smoke.tested())
+      if device:supports_capability(capabilities.temperatureAlarm) then
+        device:emit_event(temperatureAlarm.temperatureAlarm.heat())
+      end
+      if device:supports_capability(capabilities.smokeDetector) then
+        device:emit_event(smokeDetector.smoke.tested())
+      end
    elseif zone_status:is_alarm1_set() then
-      device:emit_event(smokeDetector.smoke.detected())
+      if device:supports_capability(capabilities.temperatureAlarm) then
+        device:emit_event(temperatureAlarm.temperatureAlarm.heat())
+      end
+      if device:supports_capability(capabilities.smokeDetector) then
+        device:emit_event(smokeDetector.smoke.detected())
+      end
    else
       device.thread:call_with_delay(6, function ()
-      device:emit_event(smokeDetector.smoke.clear())
+        if device:supports_capability(capabilities.temperatureAlarm) then
+          device:emit_event(temperatureAlarm.temperatureAlarm.cleared())
+        end
+        if device:supports_capability(capabilities.smokeDetector) then
+          device:emit_event(smokeDetector.smoke.clear())
+        end
       end)
    end
 end
@@ -249,7 +271,7 @@ local frient_smoke_sensor = {
     }
   },
   can_handle = function(opts, driver, device, ...)
-    return device:get_manufacturer() == "frient A/S" and device:get_model() == "SMSZB-120"
+    return device:get_manufacturer() == "frient A/S" and (device:get_model() == "SMSZB-120" or device:get_model() == "HESZB-120")
   end
 }
 return frient_smoke_sensor

drivers/SmartThings/zigbee-smoke-detector/src/init.lua

@@ -22,7 +22,8 @@ local zigbee_smoke_driver_template = {
     capabilities.smokeDetector,
     capabilities.battery,
     capabilities.alarm,
-    capabilities.temperatureMeasurement
+    capabilities.temperatureMeasurement,
+    capabilities.temperatureAlarm
   },
   sub_drivers = {
     require("frient"),