build!: Migrate from Webpack to Vite. #175
Conversation
|
Warning Rate limit exceeded@junhaoliao has exceeded the limit for the number of commits or files that can be reviewed per hour. Please wait 7 minutes and 22 seconds before requesting another review. ⌛ How to resolve this issue?After the wait time has elapsed, a review can be triggered using the We recommend that you space out your commits to avoid hitting the rate limit. 🚦 How do rate limits work?CodeRabbit enforces hourly rate limits for each developer per organization. Our paid plans have higher rate limits than the trial, open-source and free plans. In all cases, we re-allow further reviews after a brief timeout. Please see our FAQ for further information. ⛔ Files ignored due to path filters (1)
📒 Files selected for processing (4)
WalkthroughThis pull request implements several modifications across documentation, configuration, and source files. The development command in the docs has been updated, and ESLint and Jest configurations have been modified. The build system has shifted from Webpack to Vite with corresponding updates to package scripts and dependencies. HTML and TypeScript configuration files have been adjusted, including new Vite and TS config files and the removal of Webpack configurations. Additionally, enhancements include a new Monaco Editor bootstrap file and updates to worker instantiation, as well as adjustments to decoder modules and timestamp types. Changes
Sequence Diagram(s)sequenceDiagram
participant User
participant Vite
participant Index
participant Main
participant Monaco
participant Context
participant Worker
User->>Vite: Run "npm dev"
Vite->>Index: Serve updated index.html
Index->>Main: Load /src/main.tsx
Main->>Monaco: Import Monaco bootstrap module for setup
Main->>Context: Initialize State Context Provider
Context->>Worker: Instantiate MainWorker directly
Suggested reviewers
Thank you for using CodeRabbit. We offer it for free to the OSS community and would appreciate your support in helping us grow. If you find it useful, would you consider giving us a shout-out on your favorite social media? 🪧 TipsChatThere are 3 ways to chat with CodeRabbit:
Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments. CodeRabbit Commands (Invoked using PR comments)
Other keywords and placeholders
CodeRabbit Configuration File (
|
junhaoliao
changed the title
| "lint": "npm run lint:check", | ||
| "lint:check": "npm-run-all --sequential --continue-on-error lint:check:*", | ||
| "lint:check:css": "stylelint src/**/*.css", | ||
| "lint:check:js": "eslint . --max-warnings 0", | ||
| "lint:fix": "npm-run-all --parallel --continue-on-error \"lint:check:* -- --fix\"", | ||
| "start": "webpack serve --open --config webpack.dev.js", |
There was a problem hiding this comment.
Alternatively, we can keep start as an alias of dev. e.g.,
"start": "npm run dev",
And this PR won't necessarily be breaking.
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 1
🧹 Nitpick comments (4)
src/components/Editor/MonacoInstance/bootstrap.ts (1)
1-18: Consider using path aliases for Monaco imports.The imports could be simplified using path aliases to reduce line length and improve maintainability.
Consider adding path alias in
vite.config.ts:export default defineConfig({ + resolve: { + alias: { + '@monaco': 'monaco-editor/esm/vs' + } + }, // ... rest of config });Then update imports:
-import "monaco-editor/esm/vs/editor/contrib/clipboard/browser/clipboard.js"; +import "@monaco/editor/contrib/clipboard/browser/clipboard.js";tsconfig.app.json (1)
1-46: Consider adding React-specific TypeScript settings.While the current configuration is solid, consider adding these React-specific improvements:
"compilerOptions": { + "jsxImportSource": "react", + "types": ["react/next", "react-dom/next"], // ... existing options }🧰 Tools
🪛 Biome (1.9.4)
[error] 15-15: JSON standard does not allow comments.
(parse)
[error] 16-16: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 16-16: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 16-16: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 16-16: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 17-17: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 17-17: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 17-17: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 17-17: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 18-18: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 18-18: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 18-18: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 18-18: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 19-19: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 19-19: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 19-19: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 19-19: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 20-20: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 20-20: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 20-20: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 20-20: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 21-21: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 21-21: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 21-21: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 21-23: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 23-23: JSON standard does not allow comments.
(parse)
[error] 24-24: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 24-24: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 24-24: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 24-24: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 25-25: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 25-25: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 25-25: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 25-25: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 26-26: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 26-26: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 26-26: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 26-26: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 27-27: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 27-27: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 27-27: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 27-27: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 28-28: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 28-28: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 28-28: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 28-28: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 29-29: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 29-29: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 29-29: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 29-29: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 30-30: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 30-30: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 30-30: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 30-30: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 31-31: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 31-31: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 31-31: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 31-31: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 32-32: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 32-32: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 32-32: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 32-32: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 33-33: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 33-33: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 33-33: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 33-33: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 34-34: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 34-34: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 34-34: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 34-34: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 35-35: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 35-35: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 35-35: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 35-35: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 36-36: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 36-36: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 36-36: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 36-36: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 37-37: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 37-37: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 37-37: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 37-37: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 38-38: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 38-38: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 38-38: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 38-38: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 39-39: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 39-39: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 39-39: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 40-40: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 41-41: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 41-41: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 41-45: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 45-46: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
index.html (1)
10-10: Simplify viewport meta tag.The current viewport meta tag includes redundant values. The
initial-scale=1andmaximum-scale=1combination might also impact accessibility.- <meta name="viewport" content="initial-scale=1, maximum-scale=1, width=device-width" /> + <meta name="viewport" content="width=device-width, initial-scale=1" />docs/src/dev-guide/building-getting-started.md (1)
24-24: Use consistent npm command format.For consistency with other commands in the documentation (like
npm run build), use therunkeyword.-npm dev +npm run dev
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
⛔ Files ignored due to path filters (1)
package-lock.jsonis excluded by!**/package-lock.json
📒 Files selected for processing (20)
docs/src/dev-guide/building-getting-started.md(1 hunks)eslint.config.mjs(3 hunks)index.html(2 hunks)jest.config.ts(1 hunks)package.json(2 hunks)src/components/Editor/MonacoInstance/bootstrap.ts(1 hunks)src/components/Editor/MonacoInstance/index.tsx(1 hunks)src/contexts/StateContextProvider.tsx(2 hunks)src/main.tsx(1 hunks)src/services/decoders/ClpIrDecoder.ts(2 hunks)src/services/decoders/JsonlDecoder/index.ts(3 hunks)src/typings/logs.ts(1 hunks)src/vite-env.d.ts(1 hunks)tsconfig.app.json(1 hunks)tsconfig.json(1 hunks)tsconfig.node.json(1 hunks)vite.config.ts(1 hunks)webpack.common.js(0 hunks)webpack.dev.js(0 hunks)webpack.prod.js(0 hunks)
💤 Files with no reviewable changes (3)
- webpack.prod.js
- webpack.common.js
- webpack.dev.js
✅ Files skipped from review due to trivial changes (4)
- src/vite-env.d.ts
- src/components/Editor/MonacoInstance/index.tsx
- src/main.tsx
- jest.config.ts
🧰 Additional context used
📓 Path-based instructions (1)
`**/*.{cpp,hpp,java,js,jsx,ts,tsx}`: - Prefer `false ==
**/*.{cpp,hpp,java,js,jsx,ts,tsx}: - Prefer false == <expression> rather than !<expression>.
vite.config.tssrc/components/Editor/MonacoInstance/bootstrap.tssrc/services/decoders/ClpIrDecoder.tssrc/contexts/StateContextProvider.tsxsrc/typings/logs.tssrc/services/decoders/JsonlDecoder/index.ts
**/*.{cpp,hpp,java,js,jsx,ts,tsx}: - Prefer false == <expression> rather than !<expression>.
vite.config.tssrc/components/Editor/MonacoInstance/bootstrap.tssrc/services/decoders/ClpIrDecoder.tssrc/contexts/StateContextProvider.tsxsrc/typings/logs.tssrc/services/decoders/JsonlDecoder/index.ts🧠 Learnings (1)
src/services/decoders/ClpIrDecoder.ts (1)
Learnt from: davemarco
PR: y-scope/yscope-log-viewer#123
File: src/services/decoders/ClpIrDecoder.ts:0-0
Timestamp: 2024-11-18T01:36:22.048Z
Learning: In JavaScript/TypeScript module imports, `index` is automatically resolved when importing from a directory, so specifying `index` in the import path is unnecessary.
🪛 Biome (1.9.4)
tsconfig.node.json
[error] 10-10: JSON standard does not allow comments.
(parse)
[error] 11-11: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 11-11: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 11-11: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 11-11: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 12-12: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 12-12: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 12-12: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 12-12: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 13-13: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 13-13: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 13-13: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 13-13: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 14-14: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 14-14: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 14-14: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 14-14: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 15-15: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 15-15: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 15-15: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 15-17: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 17-17: JSON standard does not allow comments.
(parse)
[error] 18-18: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 18-18: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 18-18: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 18-18: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 19-19: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 19-19: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 19-19: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 19-19: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 20-20: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 20-20: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 20-20: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 20-20: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 21-21: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 21-21: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 21-21: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 21-21: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 22-22: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 22-22: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 22-22: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 22-22: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 23-23: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 23-23: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 23-23: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 23-23: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 24-24: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 24-24: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 24-24: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 24-24: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 25-25: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 25-25: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 25-25: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 25-25: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 26-26: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 26-26: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 26-26: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 26-26: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 27-27: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 27-27: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 27-27: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 27-27: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 28-28: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 28-28: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 28-28: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 28-28: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 29-29: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 29-29: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 29-29: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 29-29: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 30-30: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 30-30: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 30-30: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 30-30: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 31-31: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 31-31: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 31-31: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 31-31: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 32-32: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 32-32: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 32-32: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 32-32: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 33-33: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 33-33: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 33-33: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 34-34: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 35-35: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 35-35: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 35-38: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 38-39: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
tsconfig.app.json
[error] 15-15: JSON standard does not allow comments.
(parse)
[error] 16-16: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 16-16: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 16-16: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 16-16: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 17-17: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 17-17: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 17-17: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 17-17: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 18-18: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 18-18: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 18-18: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 18-18: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 19-19: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 19-19: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 19-19: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 19-19: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 20-20: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 20-20: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 20-20: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 20-20: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 21-21: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 21-21: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 21-21: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 21-23: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 23-23: JSON standard does not allow comments.
(parse)
[error] 24-24: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 24-24: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 24-24: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 24-24: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 25-25: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 25-25: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 25-25: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 25-25: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 26-26: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 26-26: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 26-26: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 26-26: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 27-27: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 27-27: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 27-27: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 27-27: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 28-28: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 28-28: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 28-28: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 28-28: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 29-29: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 29-29: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 29-29: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 29-29: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 30-30: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 30-30: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 30-30: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 30-30: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 31-31: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 31-31: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 31-31: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 31-31: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 32-32: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 32-32: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 32-32: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 32-32: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 33-33: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 33-33: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 33-33: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 33-33: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 34-34: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 34-34: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 34-34: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 34-34: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 35-35: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 35-35: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 35-35: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 35-35: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 36-36: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 36-36: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 36-36: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 36-36: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 37-37: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 37-37: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 37-37: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 37-37: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 38-38: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 38-38: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 38-38: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 38-38: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 39-39: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 39-39: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 39-39: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 40-40: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 41-41: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 41-41: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 41-45: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 45-46: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
🔇 Additional comments (14)
vite.config.ts (2)
6-26: LGTM! The Vite configuration is well-structured.The configuration properly handles:
- Manual chunking for Monaco editor optimization
- Source maps for debugging
- Development server port
- React plugin integration
19-21:❓ Verification inconclusive
Verify the dependency exclusion.
Please confirm that excluding
clp-ffi-js/workerfrom optimization is still necessary with Vite.
🌐 Web query:
Does Vite require excluding Web Workers from dependency optimization?💡 Result:
Vite doesn't inherently require excluding Web Workers from dependency optimization, but there are specific scenarios where manual configuration might be needed depending on how workers are implemented and their dependencies. Here's the breakdown:
Default Behavior
- Automatic Inclusion: Vite automatically pre-bundles dependencies referenced in your application code (including workers) unless explicitly excluded via
optimizeDeps.exclude[1][4].- Worker-Specific Handling: Web Workers are processed as separate entries by Vite's build system and benefit from the same dependency optimization as main-thread code[6][8].
When Exclusion Might Be Necessary
Browser-Specific Worker Implementations:
- If workers rely on browser-specific APIs not available during Node-based pre-bundling, you might need to exclude them[2].
- Example configuration:
optimizeDeps: { exclude: ['worker-dep-with-browser-apis'] }Complex Dependency Chains:
- Workers importing CommonJS dependencies nested within ESM modules may require explicit inclusion:
[1][3]optimizeDeps: { include: ['esm-worker > cjs-dep'] }Custom Worker Resolution:
- When using non-standard worker loading patterns (e.g., dynamic imports with query parameters), explicit inclusion ensures detection:
[6][8]optimizeDeps: { include: ['special-worker?worker'] }Performance Considerations
- Large Dependencies: Keep workers in optimization for CommonJS→ESM conversion and request coalescing[4][7].
- Small ESM Dependencies: Exclude trivial ESM deps to avoid unnecessary processing:
[3][7]optimizeDeps: { exclude: ['small-esm-dep'] }Special Cases
- Monorepo Workers: Linked packages require explicit inclusion if they use CommonJS:
[3]optimizeDeps: { include: ['linked-worker-dep'] }- Browser-Vite Implementations: Modified Vite versions running in browsers may disable optimization entirely for workers[2].
For most projects using standard Web Worker patterns, Vite's automatic dependency optimization works without configuration. Manual exclusion/inclusion becomes necessary only when dealing with special dependency resolution requirements or non-standard worker implementations.
Citations:
- 1: https://vite.dev/config/dep-optimization-options
- 2: https://divriots.com/blog/vite-in-the-browser/
- 3: https://www.restack.io/p/vite-answer-assetsinclude-node_modules
- 4: https://v3.vitejs.dev/guide/features
- 5: https://community.cesium.com/t/is-there-a-good-way-to-use-cesium-with-vite/27545
- 6: https://dev.to/franciscomendes10866/how-to-use-service-workers-with-react-17p2
- 7: https://mollify.noroff.dev/content/feu2/javascript-2/module-3/vite/advanced-configuration?nav=course
- 8: https://johnnyreilly.com/web-workers-comlink-vite-tanstack-query
- 9: https://vitest.dev/config/
- 10: https://v2.vitejs.dev/config/
Dependency Exclusion Verification
The current configuration excludes
clp-ffi-js/workerfrom Vite’s dependency optimization:optimizeDeps: { exclude: ["clp-ffi-js/worker"], },After reviewing Vite’s default behaviour, note that:
- Automatic Optimisation: Vite automatically pre-bundles Web Workers, so explicit exclusion is not inherently required.
- When to Exclude: Manual exclusion is only necessary if the worker (or its dependencies) uses non-standard patterns or browser-specific APIs that cause issues during pre-bundling.
- Action Required: Please verify that
clp-ffi-js/workerindeed encounters such issues. If testing shows no adverse effects when it’s included in optimization, consider removing the exclusion to ease the configuration.src/typings/logs.ts (1)
46-46:❓ Verification inconclusive
Verify timestamp type compatibility.
The change from number to BigInt for
INVALID_TIMESTAMP_VALUEmight affect existing timestamp comparisons.
🏁 Script executed:
#!/bin/bash # Search for timestamp comparisons that might be affected rg -A 2 "INVALID_TIMESTAMP_VALUE" --type tsLength of output: 2844
Verify timestamp type compatibility with BigInt in timestamp handling.
The change to BigInt (
0n) forINVALID_TIMESTAMP_VALUEinsrc/typings/logs.tsraises concerns for functions that work with timestamps (e.g.convertToDayjsTimestampanddayjs.utc). In particular, please confirm that:
- All usages (notably in
src/services/decoders/JsonlDecoder/index.tsandsrc/services/decoders/JsonlDecoder/utils.ts) appropriately handle BigInt values when converting or comparing timestamps.- The dayjs functions (and any custom conversion logic) correctly process BigInt inputs, as dayjs typically expects numeric or string inputs.
- Timestamp comparisons remain reliable across parts of the codebase given this type change.
Please review these points to ensure no unintended side effects occur due to the new timestamp type.
src/components/Editor/MonacoInstance/bootstrap.ts (1)
21-25: LGTM! Worker configuration is correct for Vite.The Monaco worker setup follows Vite's recommended pattern for Web Workers.
eslint.config.mjs (2)
18-32: LGTM! TypeScript configuration overrides are well-structured.The separate TypeScript configurations for app and node files are properly set up.
60-65: LGTM! Worker import configuration is correct.The import ignore pattern for
.workerfiles properly handles Vite's Web Worker imports.src/services/decoders/ClpIrDecoder.ts (1)
1-1: LGTM! Worker imports updated for Vite compatibility.The import paths have been correctly updated to use worker-specific suffixes, aligning with Vite's worker handling conventions.
Also applies to: 16-16
src/services/decoders/JsonlDecoder/index.ts (1)
20-20: LGTM! Worker import and timestamp type updates.The changes include:
- Updated worker import path for Vite compatibility.
- Changed timestamp type from
numbertobigintfor improved precision.Also applies to: 217-217, 234-234
src/contexts/StateContextProvider.tsx (1)
17-17: LGTM! Worker handling updated for Vite compatibility.The worker import and instantiation have been correctly updated to use Vite's worker handling conventions.
Also applies to: 416-416
tsconfig.json (1)
2-10: LGTM! TypeScript configuration updated for modular project structure.The configuration has been correctly updated to use project references, which is a recommended approach for modular TypeScript projects and aligns well with Vite's conventions.
package.json (2)
7-9: LGTM! Scripts updated correctly for Vite.The development and build scripts have been properly updated to use Vite commands, following Vite's conventions.
Also applies to: 14-14
37-38:⚠️ Potential issue❌ Incorrect review comment
Verify React version compatibility.
The specified React version
^19.0.0is not yet released. This could cause installation failures.Please update to the latest stable version:
- "react": "^19.0.0", - "react-dom": "^19.0.0" + "react": "^18.2.0", + "react-dom": "^18.2.0"
🌐 Web query:
What is the latest version of React?💡 Result:
The latest stable version of React is 19.0, released on December 5, 2024[1][2][6][8]. This major update introduces significant improvements and new features:
Key Changes in React 19
- New JSX Transform: Requires updated tooling for better performance and bundle size optimizations[2]
- Deprecated API Removals: Eliminated legacy APIs including
propTypes, string refs, andReact.createFactory[2]- Enhanced Error Handling: Errors now report via
window.reportErrorby default with customizable error boundaries[2]- Concurrent Features: Improved Suspense integration and streaming server rendering capabilities[6]
Upgrade Recommendations
The React team advises:
- First upgrade to React 18.3.1 to identify deprecated API usage[2]
- Follow the official React 19 Upgrade Guide for migration steps[6]
Notable additions include server components support, new hooks like
useActionState, and improved hydration algorithms[6]. The npm package[email protected]has been available since December 2024[8].Citations:
- 1: https://react.dev/versions
- 2: https://github.com/facebook/react/releases
- 3: https://en.wikipedia.org/wiki/React_(software)
- 4: https://www.scalablepath.com/react/react-18-release-features
- 5: https://www.w3schools.com/react/react_upgrade.asp
- 6: https://react.dev/blog/2024/12/05/react-19
- 7: https://legacy.reactjs.org/versions/
- 8: https://www.npmjs.com/package/react
React Version Verified and Current
After checking the latest release details, the versions specified in package.json:
"react": "^19.0.0", "react-dom": "^19.0.0"are valid. React 19.0.0 is now the latest stable release (officially available since December 2024), so no downgrade or update is needed. Please ensure that the overall Vite migration has also been thoroughly verified.
Likely an incorrect or invalid review comment.
tsconfig.node.json (1)
1-39: LGTM! Well-structured TypeScript configuration for Node environment.The configuration includes comprehensive compiler options and strict type checking rules, which will help maintain code quality. The inclusion of Vite and Jest config files is appropriate for the build tooling.
🧰 Tools
🪛 Biome (1.9.4)
[error] 10-10: JSON standard does not allow comments.
(parse)
[error] 11-11: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 11-11: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 11-11: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 11-11: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 12-12: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 12-12: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 12-12: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 12-12: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 13-13: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 13-13: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 13-13: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 13-13: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 14-14: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 14-14: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 14-14: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 14-14: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 15-15: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 15-15: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 15-15: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 15-17: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 17-17: JSON standard does not allow comments.
(parse)
[error] 18-18: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 18-18: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 18-18: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 18-18: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 19-19: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 19-19: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 19-19: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 19-19: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 20-20: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 20-20: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 20-20: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 20-20: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 21-21: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 21-21: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 21-21: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 21-21: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 22-22: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 22-22: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 22-22: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 22-22: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 23-23: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 23-23: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 23-23: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 23-23: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 24-24: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 24-24: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 24-24: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 24-24: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 25-25: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 25-25: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 25-25: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 25-25: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 26-26: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 26-26: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 26-26: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 26-26: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 27-27: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 27-27: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 27-27: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 27-27: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 28-28: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 28-28: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 28-28: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 28-28: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 29-29: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 29-29: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 29-29: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 29-29: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 30-30: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 30-30: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 30-30: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 30-30: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 31-31: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 31-31: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 31-31: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 31-31: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 32-32: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 32-32: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 32-32: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 32-32: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 33-33: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 33-33: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 33-33: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 34-34: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 35-35: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 35-35: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 35-38: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 38-39: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
index.html (1)
20-20: LGTM! Proper module script setup for Vite.The script tag correctly uses the
type="module"attribute and points to the new entry point.
package.json
Outdated
| "webpack-cli": "^6.0.1", | ||
| "webpack-dev-server": "^5.2.0", | ||
| "webpack-merge": "^6.0.1" | ||
| "vite": "^6.0.11" |
There was a problem hiding this comment.
💡 Verification agent
🧩 Analysis chain
Verify Vite version compatibility.
The specified Vite version ^6.0.11 is not yet released. This could cause installation failures.
Please update to the latest stable version:
- "vite": "^6.0.11"
+ "vite": "^5.0.12"🌐 Web query:
What is the latest version of Vite?
💡 Result:
The latest version of Vite is 6.1.0, released on February 5, 2025[1][2]. This minor update includes several new features and improvements such as:
- Enhanced CLI host certificate visibility
- Environment variable support for allowed hosts
- Native runtime configuration imports
- New
.jxlimage format support - Performance optimizations for CSS processing with PostCSS[2]
Vite follows semantic versioning, with major releases like Vite 6.0 (released November 26, 2024) introducing breaking changes like Node.js version requirement updates and architectural improvements[2][3]. The project maintains regular patch releases approximately weekly and minor releases every few months[3].
Citations:
- 1: https://www.npmjs.com/package/vite
- 2: https://github.com/vitejs/vite/blob/main/packages/vite/CHANGELOG.md
- 3: https://vite.dev/releases
- 4: https://v3.vitejs.dev/guide/
- 5: https://www.npmjs.com/package/create-vite
- 6: https://github.com/vitejs/vite/releases
Action Required: Update Vite Dependency to the Latest Stable Version
After verifying the current Vite release information, it turns out that the latest stable version is 6.1.0 (released on February 5, 2025). The current dependency in your package.json is specified as "vite": "^6.0.11", which is an earlier patch and does not reflect the latest fixes and features. Furthermore, the previously suggested downgrade to "vite": "^5.0.12" is incorrect based on the current release data.
- File: package.json (Line 59)
- Replace:
- "vite": "^6.0.11" + "vite": "^6.1.0"
- Replace:
Please update the dependency accordingly and verify that all compatibility tests pass after the upgrade.
📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| "vite": "^6.0.11" | |
| "vite": "^6.1.0" |
| @@ -21,7 +21,7 @@ variable `NODE_ENV=production` is set. | |||
| You can build and serve the viewer in debug mode using: | |||
|
|
|||
| ```shell | |||
| npm start | |||
| npm dev | |||
There was a problem hiding this comment.
This is to follow conventions in the Vite templates.
| "lint": "npm run lint:check", | ||
| "lint:check": "npm-run-all --sequential --continue-on-error lint:check:*", | ||
| "lint:check:css": "stylelint src/**/*.css", | ||
| "lint:check:js": "eslint . --max-warnings 0", | ||
| "lint:fix": "npm-run-all --parallel --continue-on-error \"lint:check:* -- --fix\"", | ||
| "start": "webpack serve --open --config webpack.dev.js", | ||
| "preview": "vite preview", |
There was a problem hiding this comment.
This command serves files in the /dist directory, which requires npm run build to be run beforehand.
| "test": "jest" | ||
| }, | ||
| "type": "module", |
There was a problem hiding this comment.
This is needed for vite.config.ts to be interpreted as an mjs source.
| @@ -14,6 +14,7 @@ import LogExportManager, { | |||
| EXPORT_LOG_PROGRESS_VALUE_MAX, | |||
| EXPORT_LOG_PROGRESS_VALUE_MIN, | |||
| } from "../services/LogExportManager"; | |||
| import MainWorker from "../services/MainWorker.worker?worker"; | |||
There was a problem hiding this comment.
There was a problem hiding this comment.
The renaming was to follow conventions in Vite templates.
There was a problem hiding this comment.
The file renaming was to follow conventions in Vite templates.
| @@ -214,7 +214,7 @@ class JsonlDecoder implements Decoder { | |||
| * @return The decoded log event. | |||
| */ | |||
| #decodeLogEvent = (logEventIdx: number): DecodeResult => { | |||
| let timestamp: number; | |||
| let timestamp: bigint; | |||
There was a problem hiding this comment.
The TS error should be fixed or vite build would fail.
|
|
||
| // https://vite.dev/config/ | ||
| export default defineConfig({ | ||
| appType: "mpa", |
There was a problem hiding this comment.
if with default "spa", anything that doesn't exist would be redirected to the index.html file. e.g.,
http://localhost:3010/test/non-exist.clp.zst -> ``http://localhost:3010/index.html`
| // https://vite.dev/config/ | ||
| export default defineConfig({ | ||
| appType: "mpa", | ||
| base: "./", |
There was a problem hiding this comment.
If not specified, after build, the log viewer can only be served at a website root.
| appType: "mpa", | ||
| base: "./", | ||
| build: { | ||
| assetsDir: "", |
There was a problem hiding this comment.
Put all assets under dist instead of dist/assets, which is more convenient for deployment (some customer's s3 webui doesn't upload files in a folder when it's DND)
| sourcemap: true, | ||
| }, | ||
| optimizeDeps: { | ||
| exclude: ["clp-ffi-js/worker"], |
There was a problem hiding this comment.
Or the ClpFfiJs-worker.wasm file is not found when serving from the debug server.
There was a problem hiding this comment.
Note that according to the docs, optimizeDeps only works with the debug server (rather than the build as well) in the latest version of Vite.
| /* eslint-disable @stylistic/max-len */ | ||
| import EditorWorker from "monaco-editor/esm/vs/editor/editor.worker?worker"; | ||
|
|
||
| import "monaco-editor/esm/vs/base/browser/ui/codicons/codiconStyles.js"; |
|
|
||
| import "monaco-editor/esm/vs/base/browser/ui/codicons/codiconStyles.js"; | ||
| import "monaco-editor/esm/vs/editor/browser/coreCommands.js"; | ||
| import "monaco-editor/esm/vs/editor/contrib/clipboard/browser/clipboard.js"; |
There was a problem hiding this comment.
"Copy" item in the inline context menu
| import "monaco-editor/esm/vs/editor/browser/coreCommands.js"; | ||
| import "monaco-editor/esm/vs/editor/contrib/clipboard/browser/clipboard.js"; | ||
| import "monaco-editor/esm/vs/editor/contrib/contextmenu/browser/contextmenu.js"; | ||
| import "monaco-editor/esm/vs/editor/contrib/find/browser/findController.js"; |
There was a problem hiding this comment.
the in-page Find toolbox
| import "monaco-editor/esm/vs/editor/contrib/folding/browser/folding.js"; | ||
| import "monaco-editor/esm/vs/editor/contrib/hover/browser/hoverContribution.js"; | ||
| import "monaco-editor/esm/vs/editor/contrib/links/browser/links.js"; | ||
| import "monaco-editor/esm/vs/editor/contrib/readOnlyMessage/browser/contribution.js"; |
There was a problem hiding this comment.
shows a "readonly" message when user tries to edit a read only editor.
| import "monaco-editor/esm/vs/editor/contrib/hover/browser/hoverContribution.js"; | ||
| import "monaco-editor/esm/vs/editor/contrib/links/browser/links.js"; | ||
| import "monaco-editor/esm/vs/editor/contrib/readOnlyMessage/browser/contribution.js"; | ||
| import "monaco-editor/esm/vs/editor/contrib/sectionHeaders/browser/sectionHeaders.js"; |
There was a problem hiding this comment.
needed for links to be shown as hyperlinks
| import "monaco-editor/esm/vs/editor/contrib/links/browser/links.js"; | ||
| import "monaco-editor/esm/vs/editor/contrib/readOnlyMessage/browser/contribution.js"; | ||
| import "monaco-editor/esm/vs/editor/contrib/sectionHeaders/browser/sectionHeaders.js"; | ||
| import "monaco-editor/esm/vs/editor/contrib/wordHighlighter/browser/wordHighlighter.js"; |
There was a problem hiding this comment.
put cursor on a word and all similar words would be highlighted
| import "monaco-editor/esm/vs/editor/contrib/readOnlyMessage/browser/contribution.js"; | ||
| import "monaco-editor/esm/vs/editor/contrib/sectionHeaders/browser/sectionHeaders.js"; | ||
| import "monaco-editor/esm/vs/editor/contrib/wordHighlighter/browser/wordHighlighter.js"; | ||
| import "monaco-editor/esm/vs/editor/standalone/browser/quickAccess/standaloneCommandsQuickAccess.js"; |
Description
npm run starttonpm run devto follow conventions from the Vite template.Checklist
breaking change.
Validation performed
npm run build)¹ The debug server launch command differs between Vite (
npm run dev) and Webpack (npm run start); the times are measured from the execution of npm run dev to the first render appearing in the browser.Summary by CodeRabbit
New Features
Chores