IPv6-stuff

IPv6 tunneling - IPv6 in 4 - setting up an IPv6 only network

Purpose:

This is a technology template that will enable you to set up an IPv6-ONLY network. This will also include stuff about setting up a tunnel (IPv6in4) using a tunnel broker

Requirements:

• Asus RT-N16 router running OpenWRT
• internet connection
• linux running pc
• tunnel broker (SixXS - https://www.sixxs.net)

Main steps :

0. Install OpenWRT on a router (Asus RT-N16)

1. Make a Sixxs account and get a tunnel

2. Make a IPv6 subnet

3. Install and configure aiccu

4. Install and configure radvd

5. test

How to:

Install OpenWRT on Asus RT-N16

1. Get this code: git pull git://github.com/moozer/TT_Asus_RT-N16_and_OpenWrt.git

2. Run the script: cd TT_Asus_RT-N16_and_OpenWrt followed by ./runme.sh

3. Follow what the script says

4. Resetting to defaults: telnet 192.168.1.1, mtd erase nvram and finally reboot

5. More here : https://github.com/moozer/TT_Asus_RT-N16_and_OpenWrt

Use a tunnel broker, preferably SixXS

1. Make account here -> http://www.sixxs.net/signup/create/

• it is reccomended to use a real address and reason because it will be verified
• type address on multiple lines
• type more than one line for a reason
• wait for registration; you will most likely receive confirmation in <24h

2. Request a tunnel -> http://www.sixxs.net/home/requesttunnel/

• select the first option (Dynamic NAT-traversing IPv4 Endpoint using AYIYA)
• next step >> now you have to select a PoP; preferably choose the public one
• use a real reason, in the reason box; preferably more than 1 line
• click on Place request for a new Tunnel >> and wait (it should be emailed to you in under 24h, if not just wait)

Install and configuring aiccu on the router

Make sure you have the following before starting:

• information from Sixxs : username, password, tunnel id, your ipv6, sixxs ipv6, your subnet prefix
• internet acces on the router Now do the following:
• connect to the router using telnet/ssh
• run the runme.sh script
• follow instructions
• connect to the router using telnet/ssh
• run the after_reboot.sh script
• follow instructions

Resources

https://www.sixxs.net/ https://www.sixxs.net/wiki/Aiccu/Installing_on_OpenWRT ...to be added