Add error, link error, panel lock and initialized attributes for devices

maxcube/cube.py

@@ -232,16 +232,19 @@ def parse_l_message(self, message):
             device_rf_address = self.parse_rf_address(data[pos + 1 : pos + 4])
 
             device = self.device_by_rf(device_rf_address)
+            bits1, bits2 = struct.unpack("BB", bytearray(data[pos + 5 : pos + 7]))
 
             if device:
-                bits1, bits2 = struct.unpack("BB", bytearray(data[pos + 5 : pos + 7]))
                 device.battery = self.resolve_device_battery(bits2)
+                device.link_error = self.resolve_device_link_error(bits2)
+                device.initialized = self.resolve_device_initialized(bits1)
+                device.error = self.resolve_device_error(bits1)
 
             # Thermostat or Wall Thermostat
             if device and (device.is_thermostat() or device.is_wallthermostat()):
                 device.target_temperature = (data[pos + 8] & 0x7F) / 2.0
-                bits1, bits2 = struct.unpack("BB", bytearray(data[pos + 5 : pos + 7]))
                 device.mode = self.resolve_device_mode(bits2)
+                device.panel_locked = self.resolve_device_panel_locked(bits2)
 
             # Thermostat
             if device and device.is_thermostat():
@@ -365,10 +368,26 @@ def set_programmes_from_config(self, config_file):
     def resolve_device_mode(cls, bits):
         return bits & 3
 
+    @classmethod
+    def resolve_device_panel_locked(cls, bits):
+        return 1 if bits & 0b00100000 else 0
+
+    @classmethod
+    def resolve_device_link_error(cls, bits):
+        return 1 if bits & 0b01000000 else 0
+
     @classmethod
     def resolve_device_battery(cls, bits):
         return bits >> 7
 
+    @classmethod
+    def resolve_device_initialized(cls, bits):
+        return 1 if bits & 0b00000010 else 0
+
+    @classmethod
+    def resolve_device_error(cls, bits):
+        return 1 if bits & 0b00001000 else 0
+
     @classmethod
     def parse_rf_address(cls, address):
         return "".join("{:02X}".format(x) for x in address)

maxcube/device.py

@@ -15,6 +15,18 @@
 MAX_DEVICE_BATTERY_OK = 0
 MAX_DEVICE_BATTERY_LOW = 1
 
+MAX_DEVICE_PANEL_UNLOCKED = 0
+MAX_DEVICE_PANEL_LOCKED = 1
+
+MAX_DEVICE_LINK_STATUS_OK = 0
+MAX_DEVICE_LINK_STATUS_ERROR = 1
+
+MAX_DEVICE_STATUS_NOT_INITIALIZED = 0
+MAX_DEVICE_STATUS_INITIALIZED = 1
+
+MAX_DEVICE_ERROR_NO = 0
+MAX_DEVICE_ERROR_YES = 1
+
 MODE_NAMES = {
     MAX_DEVICE_MODE_AUTOMATIC: "auto",
     MAX_DEVICE_MODE_MANUAL: "manual",
@@ -30,6 +42,10 @@ def __init__(self):
         self.room_id = None
         self.name = None
         self.serial = None
+        self.panel_locked = None
+        self.link_status = None
+        self.status_inited = None
+        self.error = None
         self.battery = None
         self.programme = None
 
@@ -49,6 +65,14 @@ def describe(self, kind: str, *args: Tuple[str]):
         state = "".join("," + s for s in args if s)
         if self.battery == MAX_DEVICE_BATTERY_LOW:
             state = ",LOW_BATT" + state
+        if self.error == MAX_DEVICE_ERROR_YES:
+            state = ",ERROR" + state
+        if self.link_status == MAX_DEVICE_LINK_STATUS_ERROR:
+            state = ",LINK_ERROR" + state
+        if self.panel_locked == MAX_DEVICE_PANEL_LOCKED:
+            state = ",LOCKED" + state
+        if self.status_inited == MAX_DEVICE_STATUS_NOT_INITIALIZED:
+            state = ",NOT_INITIALIZED" + state
         return f"{kind} sn={self.serial},rf={self.rf_address},name={self.name}" + state
 
     def __str__(self):