Skip to content

Infos for Install on linux in nucleo32-board.md #496

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Open
jdohm wants to merge 1 commit into
base: master
Choose a base branch
from
Open

Infos for Install on linux in nucleo32-board.md #496

Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
17 changes: 17 additions & 0 deletions docs/nucleo32-board.md
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -85,10 +85,15 @@ brew install arm-none-eabi-gcc
### Install flashing software

ST provides a CLI flashing tool - `STM32_Programmer_CLI`. It can be downloaded directly from the vendor's site:

1. Go to [download site URL](https://www.st.com/content/st_com/en/products/development-tools/software-development-tools/stm32-software-development-tools/stm32-programmers/stm32cubeprog.html), go to bottom page and from STM32CubeProg row select Download button.

2. Unzip contents of the archive.

3. Run \*Linux setup

4. In installation directory go to `./bin` - there the `./STM32_Programmer_CLI` is located

5. Add symlink to the STM32 CLI binary to `.local/bin`. Make sure the latter it is in `$PATH`.

If you're on MacOS X and installed the STM32CubeProg, you need to add the following to your path:
Expand All @@ -97,7 +102,19 @@ If you're on MacOS X and installed the STM32CubeProg, you need to add the follow
# ~/.bash_profile
export PATH="/Applications/STMicroelectronics/STM32Cube/STM32CubeProgrammer/STM32CubeProgrammer.app/Contents/MacOs/bin/":$PATH
```
If you're on Linux you need to install `libusb-1.0.0-dev`. On Ubuntu based systems, the following command can be used:

```bash
sudo apt-get install libusb-1.0.0-dev
```
Aditionally according to the usermanual (UM2237 Rev 14): To use ST-LINK probe or USB DFU to connect to a target, copy the rules files located under
Driver/rules folder in /etc/udev/rules.d/ on Ubuntu ("sudo cp \*.\* /etc/udev/rules.d").

To activate the new udev rules restart your computer or use the following command:

```bash
sudo udevadm control --reload-rules && sudo udevadm trigger
```
## Building and flashing

### Building
Expand Down