otter: initial bringup #8

amartinz · 2025-04-26T23:00:22Z

Second attempt.

97daf3e
- switches panel to DSC, got artifacts - is DSC still broken or did i mess up?
ad55461
- "borrowed" from you, how shall i best apply authorship?
The following patches were done already but also apply to otter, how should i proceed there with commit messages and authorship?

z3ntu · 2025-04-30T11:43:42Z

Regarding authorship, these are definitely your commits. If you want you can refer to me that you copied or "took inspiration" from or "Similar to Fairphone 5 configure [...]". Or just leave that part out, as you wish.

z3ntu · 2025-07-04T16:28:19Z

@amartinz Just noticed after upgrading the otter in my hands that panel is not in the main branch, so after the kernel upgrade I did from some version, there's no display support anymore. Don't recall what was on there before. Maybe something that Casey put on there a longer while ago.

Shall we get at least that in the main branch? Would make it quite a bit more functional. I didn't try the contents of this PR now, but is panel working well enough to get it in? Something is better than nothing for now.

amartinz · 2025-07-04T20:12:41Z

I got finally got panel documentation from the supplier and planned to tackle this.

I am on vacation now for two weeks, can't promise I will be able to get anything done but I'll try.

The panel code in the PR was fine-ish.
For devices with old panels (DVT only) there were artifacts, for every other panel it was working fine.

z3ntu · 2025-08-11T17:57:22Z

I've applied this plus some extra feature bringup from my side now to sc7280-6.16.y. Only the thermal patch I've ignored since it says "TODO: check if correct", we can take this later if you @amartinz can confirm.

For panel, on this prototype I have, display is working fine, just when changing brightness fast (e.g. by dragging the slider in phosh), plenty of weird things can happen to the panel, including panel becoming completely blank until you turn the panel off and on again (e.g. power button in Phosh)

[ Upstream commit 16d8fd7 ] In rtl8187_stop() move the call of usb_kill_anchored_urbs() before clearing b_tx_status.queue. This change prevents callbacks from using already freed skb due to anchor was not killed before freeing such skb. BUG: kernel NULL pointer dereference, address: 0000000000000080 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Not tainted 6.15.0 #8 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 RIP: 0010:ieee80211_tx_status_irqsafe+0x21/0xc0 [mac80211] Call Trace: <IRQ> rtl8187_tx_cb+0x116/0x150 [rtl8187] __usb_hcd_giveback_urb+0x9d/0x120 usb_giveback_urb_bh+0xbb/0x140 process_one_work+0x19b/0x3c0 bh_worker+0x1a7/0x210 tasklet_action+0x10/0x30 handle_softirqs+0xf0/0x340 __irq_exit_rcu+0xcd/0xf0 common_interrupt+0x85/0xa0 </IRQ> Tested on RTL8187BvE device. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: c1db52b ("rtl8187: Use usb anchor facilities to manage urbs") Signed-off-by: Daniil Dulov <[email protected]> Reviewed-by: Ping-Ke Shih <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit a509a55 ] As syzbot [1] reported as below: R10: 0000000000000100 R11: 0000000000000206 R12: 00007ffe17473450 R13: 00007f28b1c10854 R14: 000000000000dae5 R15: 00007ffe17474520 </TASK> ---[ end trace 0000000000000000 ]--- ================================================================== BUG: KASAN: use-after-free in __list_del_entry_valid+0xa6/0x130 lib/list_debug.c:62 Read of size 8 at addr ffff88812d962278 by task syz-executor/564 CPU: 1 PID: 564 Comm: syz-executor Tainted: G W 6.1.129-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack+0x21/0x24 lib/dump_stack.c:88 dump_stack_lvl+0xee/0x158 lib/dump_stack.c:106 print_address_description+0x71/0x210 mm/kasan/report.c:316 print_report+0x4a/0x60 mm/kasan/report.c:427 kasan_report+0x122/0x150 mm/kasan/report.c:531 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report_generic.c:351 __list_del_entry_valid+0xa6/0x130 lib/list_debug.c:62 __list_del_entry include/linux/list.h:134 [inline] list_del_init include/linux/list.h:206 [inline] f2fs_inode_synced+0xf7/0x2e0 fs/f2fs/super.c:1531 f2fs_update_inode+0x74/0x1c40 fs/f2fs/inode.c:585 f2fs_update_inode_page+0x137/0x170 fs/f2fs/inode.c:703 f2fs_write_inode+0x4ec/0x770 fs/f2fs/inode.c:731 write_inode fs/fs-writeback.c:1460 [inline] __writeback_single_inode+0x4a0/0xab0 fs/fs-writeback.c:1677 writeback_single_inode+0x221/0x8b0 fs/fs-writeback.c:1733 sync_inode_metadata+0xb6/0x110 fs/fs-writeback.c:2789 f2fs_sync_inode_meta+0x16d/0x2a0 fs/f2fs/checkpoint.c:1159 block_operations fs/f2fs/checkpoint.c:1269 [inline] f2fs_write_checkpoint+0xca3/0x2100 fs/f2fs/checkpoint.c:1658 kill_f2fs_super+0x231/0x390 fs/f2fs/super.c:4668 deactivate_locked_super+0x98/0x100 fs/super.c:332 deactivate_super+0xaf/0xe0 fs/super.c:363 cleanup_mnt+0x45f/0x4e0 fs/namespace.c:1186 __cleanup_mnt+0x19/0x20 fs/namespace.c:1193 task_work_run+0x1c6/0x230 kernel/task_work.c:203 exit_task_work include/linux/task_work.h:39 [inline] do_exit+0x9fb/0x2410 kernel/exit.c:871 do_group_exit+0x210/0x2d0 kernel/exit.c:1021 __do_sys_exit_group kernel/exit.c:1032 [inline] __se_sys_exit_group kernel/exit.c:1030 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1030 x64_sys_call+0x7b4/0x9a0 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x4c/0xa0 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x68/0xd2 RIP: 0033:0x7f28b1b8e169 Code: Unable to access opcode bytes at 0x7f28b1b8e13f. RSP: 002b:00007ffe174710a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00007f28b1c10879 RCX: 00007f28b1b8e169 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001 RBP: 0000000000000002 R08: 00007ffe1746ee47 R09: 00007ffe17472360 R10: 0000000000000009 R11: 0000000000000246 R12: 00007ffe17472360 R13: 00007f28b1c10854 R14: 000000000000dae5 R15: 00007ffe17474520 </TASK> Allocated by task 569: kasan_save_stack mm/kasan/common.c:45 [inline] kasan_set_track+0x4b/0x70 mm/kasan/common.c:52 kasan_save_alloc_info+0x25/0x30 mm/kasan/generic.c:505 __kasan_slab_alloc+0x72/0x80 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook+0x4f/0x2c0 mm/slab.h:737 slab_alloc_node mm/slub.c:3398 [inline] slab_alloc mm/slub.c:3406 [inline] __kmem_cache_alloc_lru mm/slub.c:3413 [inline] kmem_cache_alloc_lru+0x104/0x220 mm/slub.c:3429 alloc_inode_sb include/linux/fs.h:3245 [inline] f2fs_alloc_inode+0x2d/0x340 fs/f2fs/super.c:1419 alloc_inode fs/inode.c:261 [inline] iget_locked+0x186/0x880 fs/inode.c:1373 f2fs_iget+0x55/0x4c60 fs/f2fs/inode.c:483 f2fs_lookup+0x366/0xab0 fs/f2fs/namei.c:487 __lookup_slow+0x2a3/0x3d0 fs/namei.c:1690 lookup_slow+0x57/0x70 fs/namei.c:1707 walk_component+0x2e6/0x410 fs/namei.c:1998 lookup_last fs/namei.c:2455 [inline] path_lookupat+0x180/0x490 fs/namei.c:2479 filename_lookup+0x1f0/0x500 fs/namei.c:2508 vfs_statx+0x10b/0x660 fs/stat.c:229 vfs_fstatat fs/stat.c:267 [inline] vfs_lstat include/linux/fs.h:3424 [inline] __do_sys_newlstat fs/stat.c:423 [inline] __se_sys_newlstat+0xd5/0x350 fs/stat.c:417 __x64_sys_newlstat+0x5b/0x70 fs/stat.c:417 x64_sys_call+0x393/0x9a0 arch/x86/include/generated/asm/syscalls_64.h:7 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x4c/0xa0 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x68/0xd2 Freed by task 13: kasan_save_stack mm/kasan/common.c:45 [inline] kasan_set_track+0x4b/0x70 mm/kasan/common.c:52 kasan_save_free_info+0x31/0x50 mm/kasan/generic.c:516 ____kasan_slab_free+0x132/0x180 mm/kasan/common.c:236 __kasan_slab_free+0x11/0x20 mm/kasan/common.c:244 kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1724 [inline] slab_free_freelist_hook+0xc2/0x190 mm/slub.c:1750 slab_free mm/slub.c:3661 [inline] kmem_cache_free+0x12d/0x2a0 mm/slub.c:3683 f2fs_free_inode+0x24/0x30 fs/f2fs/super.c:1562 i_callback+0x4c/0x70 fs/inode.c:250 rcu_do_batch+0x503/0xb80 kernel/rcu/tree.c:2297 rcu_core+0x5a2/0xe70 kernel/rcu/tree.c:2557 rcu_core_si+0x9/0x10 kernel/rcu/tree.c:2574 handle_softirqs+0x178/0x500 kernel/softirq.c:578 run_ksoftirqd+0x28/0x30 kernel/softirq.c:945 smpboot_thread_fn+0x45a/0x8c0 kernel/smpboot.c:164 kthread+0x270/0x310 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Last potentially related work creation: kasan_save_stack+0x3a/0x60 mm/kasan/common.c:45 __kasan_record_aux_stack+0xb6/0xc0 mm/kasan/generic.c:486 kasan_record_aux_stack_noalloc+0xb/0x10 mm/kasan/generic.c:496 call_rcu+0xd4/0xf70 kernel/rcu/tree.c:2845 destroy_inode fs/inode.c:316 [inline] evict+0x7da/0x870 fs/inode.c:720 iput_final fs/inode.c:1834 [inline] iput+0x62b/0x830 fs/inode.c:1860 do_unlinkat+0x356/0x540 fs/namei.c:4397 __do_sys_unlink fs/namei.c:4438 [inline] __se_sys_unlink fs/namei.c:4436 [inline] __x64_sys_unlink+0x49/0x50 fs/namei.c:4436 x64_sys_call+0x958/0x9a0 arch/x86/include/generated/asm/syscalls_64.h:88 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x4c/0xa0 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x68/0xd2 The buggy address belongs to the object at ffff88812d961f20 which belongs to the cache f2fs_inode_cache of size 1200 The buggy address is located 856 bytes inside of 1200-byte region [ffff88812d961f20, ffff88812d9623d0) The buggy address belongs to the physical page: page:ffffea0004b65800 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12d960 head:ffffea0004b65800 order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4000000000010200(slab|head|zone=1) raw: 4000000000010200 0000000000000000 dead000000000122 ffff88810a94c500 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 2, migratetype Reclaimable, gfp_mask 0x1d2050(__GFP_IO|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_HARDWALL|__GFP_RECLAIMABLE), pid 569, tgid 568 (syz.2.16), ts 55943246141, free_ts 0 set_page_owner include/linux/page_owner.h:31 [inline] post_alloc_hook+0x1d0/0x1f0 mm/page_alloc.c:2532 prep_new_page mm/page_alloc.c:2539 [inline] get_page_from_freelist+0x2e63/0x2ef0 mm/page_alloc.c:4328 __alloc_pages+0x235/0x4b0 mm/page_alloc.c:5605 alloc_slab_page include/linux/gfp.h:-1 [inline] allocate_slab mm/slub.c:1939 [inline] new_slab+0xec/0x4b0 mm/slub.c:1992 ___slab_alloc+0x6f6/0xb50 mm/slub.c:3180 __slab_alloc+0x5e/0xa0 mm/slub.c:3279 slab_alloc_node mm/slub.c:3364 [inline] slab_alloc mm/slub.c:3406 [inline] __kmem_cache_alloc_lru mm/slub.c:3413 [inline] kmem_cache_alloc_lru+0x13f/0x220 mm/slub.c:3429 alloc_inode_sb include/linux/fs.h:3245 [inline] f2fs_alloc_inode+0x2d/0x340 fs/f2fs/super.c:1419 alloc_inode fs/inode.c:261 [inline] iget_locked+0x186/0x880 fs/inode.c:1373 f2fs_iget+0x55/0x4c60 fs/f2fs/inode.c:483 f2fs_fill_super+0x3ad7/0x6bb0 fs/f2fs/super.c:4293 mount_bdev+0x2ae/0x3e0 fs/super.c:1443 f2fs_mount+0x34/0x40 fs/f2fs/super.c:4642 legacy_get_tree+0xea/0x190 fs/fs_context.c:632 vfs_get_tree+0x89/0x260 fs/super.c:1573 do_new_mount+0x25a/0xa20 fs/namespace.c:3056 page_owner free stack trace missing Memory state around the buggy address: ffff88812d962100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88812d962180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88812d962200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88812d962280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88812d962300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== [1] https://syzkaller.appspot.com/x/report.txt?x=13448368580000 This bug can be reproduced w/ the reproducer [2], once we enable CONFIG_F2FS_CHECK_FS config, the reproducer will trigger panic as below, so the direct reason of this bug is the same as the one below patch [3] fixed. kernel BUG at fs/f2fs/inode.c:857! RIP: 0010:f2fs_evict_inode+0x1204/0x1a20 Call Trace: <TASK> evict+0x32a/0x7a0 do_unlinkat+0x37b/0x5b0 __x64_sys_unlink+0xad/0x100 do_syscall_64+0x5a/0xb0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0010:f2fs_evict_inode+0x1204/0x1a20 [2] https://syzkaller.appspot.com/x/repro.c?x=17495ccc580000 [3] https://lore.kernel.org/linux-f2fs-devel/[email protected] Tracepoints before panic: f2fs_unlink_enter: dev = (7,0), dir ino = 3, i_size = 4096, i_blocks = 8, name = file1 f2fs_unlink_exit: dev = (7,0), ino = 7, ret = 0 f2fs_evict_inode: dev = (7,0), ino = 7, pino = 3, i_mode = 0x81ed, i_size = 10, i_nlink = 0, i_blocks = 0, i_advise = 0x0 f2fs_truncate_node: dev = (7,0), ino = 7, nid = 8, block_address = 0x3c05 f2fs_unlink_enter: dev = (7,0), dir ino = 3, i_size = 4096, i_blocks = 8, name = file3 f2fs_unlink_exit: dev = (7,0), ino = 8, ret = 0 f2fs_evict_inode: dev = (7,0), ino = 8, pino = 3, i_mode = 0x81ed, i_size = 9000, i_nlink = 0, i_blocks = 24, i_advise = 0x4 f2fs_truncate: dev = (7,0), ino = 8, pino = 3, i_mode = 0x81ed, i_size = 0, i_nlink = 0, i_blocks = 24, i_advise = 0x4 f2fs_truncate_blocks_enter: dev = (7,0), ino = 8, i_size = 0, i_blocks = 24, start file offset = 0 f2fs_truncate_blocks_exit: dev = (7,0), ino = 8, ret = -2 The root cause is: in the fuzzed image, dnode #8 belongs to inode #7, after inode #7 eviction, dnode #8 was dropped. However there is dirent that has ino #8, so, once we unlink file3, in f2fs_evict_inode(), both f2fs_truncate() and f2fs_update_inode_page() will fail due to we can not load node #8, result in we missed to call f2fs_inode_synced() to clear inode dirty status. Let's fix this by calling f2fs_inode_synced() in error path of f2fs_evict_inode(). PS: As I verified, the reproducer [2] can trigger this bug in v6.1.129, but it failed in v6.16-rc4, this is because the testcase will stop due to other corruption has been detected by f2fs: F2FS-fs (loop0): inconsistent node block, node_type:2, nid:8, node_footer[nid:8,ino:8,ofs:0,cpver:5013063228981249506,blkaddr:15366] F2FS-fs (loop0): f2fs_lookup: inode (ino=9) has zero i_nlink Fixes: 0f18b46 ("f2fs: flush inode metadata when checkpoint is doing") Closes: https://syzkaller.appspot.com/x/report.txt?x=13448368580000 Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

MatthewCroughan · 2025-10-07T14:43:20Z

Should this not be closed now that most of this is in the 6.17 branch?

z3ntu · 2025-10-07T14:52:41Z

My previous comment is still accurate: #8 (comment)

Only the thermal patch I've ignored since it says "TODO: check if correct", we can take this later if you @amartinz can confirm.

TODO: check if correct Signed-off-by: Alexander Martinz <[email protected]>

amartinz · 2025-10-09T13:13:32Z

My previous comment is still accurate: #8 (comment)

Only the thermal patch I've ignored since it says "TODO: check if correct", we can take this later if you @amartinz can confirm.

Did not get to it yet, sorry.

But i have at least rebased this now onto 6.17.y.

z3ntu · 2025-10-09T14:05:36Z

arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts

 		};

+		mem-thermal {
+			polling-delay-passive = <0>;


this can be removed since it's 0

z3ntu · 2025-10-09T14:06:48Z

arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts

+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "mem_therm";


Idk if it also applies to adc, but generally generic properties first, then vendor specific ones. And boolean ones go to the end.

So reg - label - qcom,hw-settle-time - qcom,pre-scaling - qcom,ratiometric.

But also fine to keep it in this order since the ones above have this order so it'd make it inconsistent to change it

amartinz force-pushed the otter/bringup-attempt-2 branch 4 times, most recently from 8751e26 to 3976432 Compare April 28, 2025 22:05

dts: add thermal: 73f9c18

5255974

TODO: check if correct Signed-off-by: Alexander Martinz <[email protected]>

amartinz force-pushed the otter/bringup-attempt-2 branch from 3976432 to 5255974 Compare October 9, 2025 13:12

amartinz changed the base branch from sc7280-6.14.y to sc7280-6.17.y October 9, 2025 13:12

z3ntu reviewed Oct 9, 2025

View reviewed changes

arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts

};

mem-thermal {

polling-delay-passive = <0>;

Copy link

Member

z3ntu Oct 9, 2025

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

this can be removed since it's 0

z3ntu reviewed Oct 9, 2025

View reviewed changes

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Uh oh!

otter: initial bringup #8

otter: initial bringup #8

Uh oh!

amartinz commented Apr 26, 2025

Uh oh!

z3ntu commented Apr 30, 2025

Uh oh!

z3ntu commented Jul 4, 2025

Uh oh!

amartinz commented Jul 4, 2025

Uh oh!

z3ntu commented Aug 11, 2025

Uh oh!

MatthewCroughan commented Oct 7, 2025

Uh oh!

z3ntu commented Oct 7, 2025

Uh oh!

amartinz commented Oct 9, 2025

Uh oh!

z3ntu Oct 9, 2025

Uh oh!

z3ntu Oct 9, 2025

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

3 participants

Uh oh!

otter: initial bringup #8

Are you sure you want to change the base?

otter: initial bringup #8

Uh oh!

Conversation

amartinz commented Apr 26, 2025

Uh oh!

z3ntu commented Apr 30, 2025

Uh oh!

z3ntu commented Jul 4, 2025

Uh oh!

amartinz commented Jul 4, 2025

Uh oh!

z3ntu commented Aug 11, 2025

Uh oh!

MatthewCroughan commented Oct 7, 2025

Uh oh!

z3ntu commented Oct 7, 2025

Uh oh!

amartinz commented Oct 9, 2025

Uh oh!

z3ntu Oct 9, 2025

Choose a reason for hiding this comment

Uh oh!

z3ntu Oct 9, 2025

Choose a reason for hiding this comment

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

3 participants