Skip to content

rebase#134

Merged
sindhu-krishnan merged 145 commits intotopic/chrony_testfrom
develop
Nov 25, 2025
Merged

rebase#134
sindhu-krishnan merged 145 commits intotopic/chrony_testfrom
develop

Conversation

@sindhu-krishnan
Copy link
Contributor

No description provided.

rirfha948 and others added 30 commits September 5, 2025 11:58
Reason for change: Added appropriate Firewall changes
Test Procedure:
  - TBD
Risks: None
Priority: P3

Change-Id: I21e345f281f9db6a3f28ac9f22c9103d1f22f93c
Signed-off-by: rirfha948 <rasina_irfhan@comcast.com>
Reason for change: Add retry mechanism for PartnerID Unknown

Test Procedure:
1. Set PartnerID via TR181 DMs
   a. Set the DM Device.DeviceInfo.X_RDKCENTRAL-COM_Syndication.PartnerId with one of following values : "Unknown", "known", "sky-", ""
   b. Set the DM dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_Syndication.RDKB_Control.ActivatePartnerId bool true
   c. CPE goes for reboot and after reboot, Check if the PartnerID recovers with respective PartnerID configurations applied
   d. After Recovery Reboot Reason should be Reboot-DueTo-InvalidPartnerID

2. Set PartnerID DB param via syscfg
   a. set PartnerID with following values :  "Unknown", "known", "sky-", ""
   b. syscfg commit
   c. Reboot CPE and Check if the PartnerID recovers with respective PartnerID configurations applied
   d. After Recovery Reboot Reason should be Reboot-DueTo-InvalidPartnerID

3. Upgrade scenario
   a. Flash image without the fix, check Partner ID - sky-uk
   b. Set Partner ID to "Unknown" using Device.DeviceInfo.X_RDKCENTRAL-COM_Syndication.PartnerId
   c. Activate PartnerID using Device.DeviceInfo.X_RDKCENTRAL-COM_Syndication.RDKB_Control.ActivatePartnerId
   d. CPE goes for reboot and after reboot, check the DMs if the partner_defaults.json loaded for Unknown in the image without the fix.
   e. Flash the image with the fix and check if the partner ID is recovered and valid config is loaded
   f. After Recovery Reboot Reason should be Reboot-DueTo-InvalidPartnerID

4. Retry failure:
   If recovery fails after retry mechanism, then the PartnerID must be set to Unknown

Priority: P1

Risks: Low

Signed-off-by: Yashwanth Kumar H M <yashwanthkumar.hm@sky.uk>
Reason for change: Added appropriate Firewall changes
Test Procedure:
  - TBD
Risks: None
Priority: P3

Change-Id: I21e345f281f9db6a3f28ac9f22c9103d1f22f93c
Signed-off-by: rirfha948 <rasina_irfhan@comcast.com>
Reason for change:
1. Set values in syscfg.db from json file

Test Procedure:
1. Check if default PSM values are showing

Risks: Low
Signed-off-by: Arun R <arun.r@sky.uk>
Merge branch 'release/1.1.2'
Reason for change: Option 82 handling related rules for Amenity bridges
Queue number is used  61 to 63 which is not used for any other service
Test Procedure: option82 related firewall rules for tcp and udp
should be applied for respective interface queue number
Risks: Low
Priority: P1
Signed-off-by: vijayaragavalu_sundaresan2@comcast.com
RDKB-61372: Handling recovery cases of Unknown/Invalid syscfg PartnerID
Reason for change: Migrate scripts from RPI to BPI
Test Procedure: Image should bootup and all functionality should work
Risks: Low

Signed-off-by: ap934 <ap934@cable.comcast.com>
RDKDEV-1132, RDKBACCL-846: Migrate scripts from RPI to BPI
Reason for change: Webui attack handling in Firewall
Test Procedure: firewall functionality and webui launch on multiple browser
check the CPU load ave works fine and no more reported in the ticket.
Risks: Low
Priority: P0
Signed-off-by: vijayaragavalu_sundaresan2@comcast.com
Reason for change: This fix will response with option 43 when a dhcp
request or discover is received with vendor name RDKBPOD.
Test Procedure: Make sure pod is connecting in wifi and eth backhaul
Risks: None

Signed-off-by: Mannoppilly Hassan <mmanno374@cacsvml-1725647.cable.comcast.com>
RDKB-60232 : Option 82 rules for Amenity bridges
RDKB-60813 : Webui attack handling in Firewall
…on Hub6

Reason for change: Enable the crontab job entry to execute the
    FwBankInfo binary on Hub6

Test Procedure: NA

Priority:P1

Risks:Low

Signed-off-by: Suresh babu Palamangalam <suresh.babu@sky.uk>
RDKB-61412 : Add RDKBPOD generic vendor name for all extender devices
…macro

Reason for change: [COPILOT]
remove 64BIT_ARCH_SUPPORT
macro from utopia module
Test Procedure: No build warning or errors.
basic sanity
Priority: P1
Risks: Low

Change-Id: Ie04210b44a0c874ac17d083153f0ecf76cd880b8
Signed-off-by: mkorav871 <madhukrishnasmenon@comcast.com>
Reason for change: Using buffer without memset in commit_to_file
Test Procedure: sanity
Risks: Low
Signed-off-by: Netaji Panigrahi Netaji_Panigrahi@comcast.com
Reason for change: Added logline to indicate SSO is defaulted
Test Procedure: As mentioned in the ticket
Risks: Medium
RDKB-60956: Default OAUTH AuthMode feature to SSO in firmware
Signed-off-by: Sreehari Ramanjula <220073682+RAMANJULASREEHARI@users.noreply.github.com>
Reason for change:   XF10 Model support in Utopia Scripts
Test Procedure: build procedure
Risks: Medium
Priority: P1

Signed-off-by: Michael_AmalAnand@comcast.com
Reason for change:Added the debug logs
Test Procedure: Reproduce the issue
Risks: Low
Priority: P1
Reason for change: syseventd must not be started,
                   even if sysevent_open() fails
Test Procedure: refer to jira
Risks: Low
Priority:P1
Signed-off-by: abhishek_kumaracee2@comcast.com

Signed-off-by: abhishek_kumaracee2@comcast.com
…er without internet

Reason for change: Update brlan0 IP in resolv.conf when loop back address is present
Test Procedure: Check resolv.conf without RF and ensure brlan0 IP is updated
Risks: Low
Priority: P1
Reason for change: Address the code review comments
Test Procedure: Check resolv.conf without RF and ensure brlan0 IP is updated
Risks: Low
Priority: P1
TCXB8-3707: Parental Controls blocks false positives
Reason for change: Made the log message generic
Test Procedure: Check resolv.conf without RF and ensure brlan0 IP is updated
Risks: Low
Priority: P1
* XB9-668 : Upstream xb9 specific changes to github repo

Reason for change: Remove mta dependency from utopia
Test Procedure: Build and verify
Risks: None
Priority: P1
Signed-off-by: Gowthami Kanthasamy <gowthami.kanthasamy@vantiva.com>

* XB9-668 : Upstream xb9 specific changes to github repo  Reason for change: Remove mta dependency from utopia Test Procedure: Build and verify Risks: None Priority: P1 Signed-off-by: Gowthami Kanthasamy <gowthami.kanthasamy@vantiva.com>

* Update apply_system_defaults.c

---------

Signed-off-by: Gowthami Kanthasamy <gowthami.kanthasamy@vantiva.com>
RDKCOM-5457: RDKBDEV-3301 Bringup of Utopia on QCOM Platform
CBR2-2216:Observing SYS_SH_Zebra_restart marker during stability testing
Reason for change: Fix coverity issues
Test Procedure: Run coverity and check for errors in utopia
Risks: Low
Priority:P1
Signed-off-by: abhishek_kumaracee2@comcast.com

Signed-off-by: abhishek_kumaracee2@comcast.com
RDKCOM-5465: RDKBDEV-3294 Fix open port 21515 by default on unexpected interfaces.
RDKB-61914: XB,XLE and Client online in NOC and connected to each oth…
@sindhu-krishnan sindhu-krishnan requested a review from a team as a code owner November 25, 2025 07:01
@sindhu-krishnan sindhu-krishnan merged commit 2497cbf into topic/chrony_test Nov 25, 2025
4 of 6 checks passed
@github-actions
Copy link


Thank you for your submission, we really appreciate it. Like many open-source projects, we ask that you all sign our Contributor License Agreement before we can accept your contribution. You can sign the CLA by just posting a Pull Request Comment same as the below format.


I have read the CLA Document and I hereby sign the CLA


15 out of 16 committers have signed the CLA.
✅ (GoutamD2905)[https://github.com/GoutamD2905]
✅ (vijayragavalu)[https://github.com/vijayragavalu]
✅ (LakshminarayananShenbagaraj)[https://github.com/LakshminarayananShenbagaraj]
✅ (anoopchelakkode)[https://github.com/anoopchelakkode]
✅ (MonekaLakshmi)[https://github.com/MonekaLakshmi]
✅ (RAMANJULASREEHARI)[https://github.com/RAMANJULASREEHARI]
✅ (sbarre01)[https://github.com/sbarre01]
✅ (rdkcmf-jenkins)[https://github.com/rdkcmf-jenkins]
✅ (Alan-Ryan)[https://github.com/Alan-Ryan]
✅ (aprasad-97)[https://github.com/aprasad-97]
✅ (suriya-prem)[https://github.com/suriya-prem]
✅ (snayak002c)[https://github.com/snayak002c]
✅ (aadhithan01)[https://github.com/aadhithan01]
✅ (Gowthamik93)[https://github.com/Gowthamik93]
✅ (roushan-tel)[https://github.com/roushan-tel]
@mannoppilly Hassan
Mannoppilly Hassan seems not to be a GitHub user. You need a GitHub account to be able to sign the CLA. If you have already a GitHub account, please add the email address used for this commit to your account.
You can retrigger this bot by commenting recheck in this Pull Request. Posted by the CLA Assistant Lite bot.

@github-actions github-actions bot locked and limited conversation to collaborators Nov 25, 2025
Sign up for free to subscribe to this conversation on GitHub. Already have an account? Sign in.

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.