My Home bTicino platform in Home Assistant

The system is functioning with light and temperature.

LIGHT

• Show the state of light
• Switch ON or OFF pressing the wall trigger or using HA.

TEMPERATURE

• It's possible to read for each zone:

• the temperature from the probe,

• the set temperature,

• the state of the valve

GATEWAY

• It's possible to read the data from the gateway bTicino installed:
  • Gateway Model
  • Gateway IP
  • Gateway Firmware
  • Gateway Uptime

HOW TO INSTALL

• Copy all the file under custom_components directory, if not present, create it.
• You must have:
  • custom_components
    • my_home
      • init.py
      • light.py
      • sensor.py
      • manifest.json

System install automatically OpenWeb==0.0.7 from Pypi

HOW TO USE

• ad to your configuration.yaml

my_home:
  host: 'IP address of your Gateway'
  port: 'the port of your Gateway, default 20000'
  password: 'password of your Gateway'
  
  
  if your Gateway do not use password include the IP address of your homeassistant server in the list of authorized IP


#-------------------------------------------
#
#                  SENSOR
#
#-------------------------------------------
sensor:

#  MY HOME BTicino
  - platform: my_home

    devices:
      #Temperature
       - type: 'Temperature'
         Name: 'Temperature for zone A'
         indirizzo: 'zone A address'
       - type: 'SetTemperature'
         Name: 'Set Temperature for zone A'
         indirizzo: 'zone A address'
       - type: 'Valve_State'
         Name: 'State of the valve for zone A'
         indirizzo: 'zone A address'
      #Gateway
       - type: 'Gateway_IP'
         Name: 'Gateway IP'
         indirizzo: ''
       - type: 'Gateway_Model'
         Name: 'Gateway Model'
         indirizzo: ''
       - type: 'Gateway_Firmware'
         Name: 'Gateway Firmware'
         indirizzo: ''
       - type: 'Gateway_Uptime'
         Name: 'Gateway Uptime'
         indirizzo: ''


#-------------------------------------------
#
#                  LIGHT
#
#-------------------------------------------
light:

#  MY HOME BTicino
  - platform: my_home
    scan_interval: 0.5
    devices:
       - name: 'name of the light '
         indirizzo: 'the address on the bus for your light, is the value you set with 2 jumper on the  rele or wall switch es 72, 42 .....'