[feat]tools-v2: add bs create volume snapshot

tools-v2/README.md

@@ -88,6 +88,7 @@ A tool for CurveFS & CurveBs.
       - [create](#create-1)
         - [create file](#create-file)
         - [create dir](#create-dir)
+        - [create volume snapshot](#create-volume-snapshot)
       - [check](#check-1)
         - [check copyset](#check-copyset-1)
         - [check chunkserver](#check-chunkserver)
@@ -1852,6 +1853,24 @@ Output:
 +---------+
 ```
 
+##### create volume snapshot
+
+create snapshot
+
+Usage:
+```bash
+curve bs create volume snapshot --user root --filename test --snapshotname snap-test
+```
+
+Output:
+```
++------+----------+--------------+
+| USER | FILENAME | SNAPSHOTNAME |
++------+----------+---------------
+| root |   test   |  snap-test   |
++------+----------+--------------+
+```
+
 #### check
 
 ##### check copyset

tools-v2/internal/utils/row.go

@@ -136,6 +136,7 @@ const (
 	ROW_ISLAZY               = "isLazy"
 	ROW_NEXTSTEP             = "nextStep"
 	ROW_TIME                 = "time"
+	ROW_SNAPSHOTNAME         = "snapshotName"
 
 	ROW_RW_STATUS               = "rwStatus"
 	ROW_DISK_STATE              = "diskState"

tools-v2/internal/utils/snapshot/const.go

@@ -38,6 +38,7 @@ const (
 	QueryStatus      = "Status"
 	QueryType        = "Type"
 	QueryFile        = "File"
+	QueryName        = "Name"
 
 	ActionClone               = "Clone"
 	ActionRecover             = "Recover"

tools-v2/pkg/cli/command/curvebs/create/create.go

@@ -27,6 +27,7 @@ import (
 	"github.com/opencurve/curve/tools-v2/pkg/cli/command/curvebs/create/cluster"
 	"github.com/opencurve/curve/tools-v2/pkg/cli/command/curvebs/create/dir"
 	"github.com/opencurve/curve/tools-v2/pkg/cli/command/curvebs/create/file"
+	"github.com/opencurve/curve/tools-v2/pkg/cli/command/curvebs/create/volume"
 	"github.com/spf13/cobra"
 )
 
@@ -41,6 +42,7 @@ func (createCmd *CreateCmd) AddSubCommands() {
 		cluster.NewClusterTopoCmd(),
 		dir.NewDirectoryCommand(),
 		file.NewFileCommand(),
+		volume.NewVolumeCommand(),
 	)
 }
 

tools-v2/pkg/cli/command/curvebs/create/volume/snapshot/snapshot.go

@@ -0,0 +1,130 @@
+/*
+*  Copyright (c) 2023 NetEase Inc.
+*
+*  Licensed under the Apache License, Version 2.0 (the "License");
+*  you may not use this file except in compliance with the License.
+*  You may obtain a copy of the License at
+*
+*      http://www.apache.org/licenses/LICENSE-2.0
+*
+*  Unless required by applicable law or agreed to in writing, software
+*  distributed under the License is distributed on an "AS IS" BASIS,
+*  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+*  See the License for the specific language governing permissions and
+*  limitations under the License.
+ */
+/*
+* Project: CurveCli
+* Created Date: 2023-09-23
+* Author: baytan0720
+ */
+
+package snapshot
+
+import (
+	"encoding/json"
+	"fmt"
+	"time"
+
+	cmderror "github.com/opencurve/curve/tools-v2/internal/error"
+	cobrautil "github.com/opencurve/curve/tools-v2/internal/utils"
+	snapshotutil "github.com/opencurve/curve/tools-v2/internal/utils/snapshot"
+	basecmd "github.com/opencurve/curve/tools-v2/pkg/cli/command"
+	"github.com/opencurve/curve/tools-v2/pkg/config"
+	"github.com/opencurve/curve/tools-v2/pkg/output"
+	"github.com/spf13/cobra"
+)
+
+const (
+	snapshotExample = `$ curve bs create volume snapshot --user root --filename test --snapshotname snap-test`
+)
+
+type SnapshotCmd struct {
+	basecmd.FinalCurveCmd
+	snapshotAddrs []string
+	timeout       time.Duration
+
+	user         string
+	fileName     string
+	snapshotName string
+}
+
+var _ basecmd.FinalCurveCmdFunc = (*SnapshotCmd)(nil)
+
+func NewCommand() *cobra.Command {
+	return NewSnapshotCmd().Cmd
+}
+
+func NewSnapshotCmd() *SnapshotCmd {
+	sCmd := &SnapshotCmd{
+		FinalCurveCmd: basecmd.FinalCurveCmd{
+			Use:     "snapshot",
+			Short:   "create volume snapshot in curvebs cluster",
+			Example: snapshotExample,
+		},
+	}
+	basecmd.NewFinalCurveCli(&sCmd.FinalCurveCmd, sCmd)
+	return sCmd
+}
+
+func (sCmd *SnapshotCmd) AddFlags() {
+	config.AddBsSnapshotCloneFlagOption(sCmd.Cmd)
+	config.AddHttpTimeoutFlag(sCmd.Cmd)
+	config.AddBsUserRequiredFlag(sCmd.Cmd)
+	config.AddBsFileNameRequiredFlag(sCmd.Cmd)
+	config.AddBsSnapshotNameRequiredFlag(sCmd.Cmd)
+}
+
+func (sCmd *SnapshotCmd) Init(cmd *cobra.Command, args []string) error {
+	snapshotAddrs, err := config.GetBsSnapshotAddrSlice(sCmd.Cmd)
+	if err.TypeCode() != cmderror.CODE_SUCCESS || len(snapshotAddrs) == 0 {
+		return err.ToError()
+	}
+	sCmd.snapshotAddrs = snapshotAddrs
+	sCmd.timeout = config.GetFlagDuration(sCmd.Cmd, config.HTTPTIMEOUT)
+	sCmd.user = config.GetBsFlagString(sCmd.Cmd, config.CURVEBS_USER)
+	sCmd.fileName = config.GetBsFlagString(sCmd.Cmd, config.CURVEBS_FILENAME)
+	sCmd.snapshotName = config.GetBsFlagString(sCmd.Cmd, config.CURVEBS_SNAPSHOTNAME)
+	sCmd.SetHeader([]string{cobrautil.ROW_USER, cobrautil.ROW_FILE_NAME, cobrautil.ROW_SNAPSHOTNAME})
+	return nil
+}
+
+func (sCmd *SnapshotCmd) RunCommand(cmd *cobra.Command, args []string) error {
+	params := map[string]any{
+		snapshotutil.QueryAction: snapshotutil.ActionCreateSnapshot,
+		snapshotutil.QueryUser:   sCmd.user,
+		snapshotutil.QueryFile:   sCmd.fileName,
+		snapshotutil.QueryName:   sCmd.snapshotName,
+	}
+	subUri := snapshotutil.NewQuerySubUri(params)
+	metric := basecmd.NewMetric(sCmd.snapshotAddrs, subUri, sCmd.timeout)
+	result, err := basecmd.QueryMetric(metric)
+	if err.TypeCode() != cmderror.CODE_SUCCESS {
+		return err.ToError()
+	}
+	resp := snapshotutil.Response{}
+	if err := json.Unmarshal([]byte(result), &resp); err != nil {
+		return err
+	}
+	row := make(map[string]string)
+	row[cobrautil.ROW_USER] = sCmd.user
+	row[cobrautil.ROW_FILE_NAME] = sCmd.fileName
+	row[cobrautil.ROW_SNAPSHOTNAME] = sCmd.snapshotName
+
+	if resp.Code != snapshotutil.ResultSuccess {
+		return fmt.Errorf("create snapshot fail, requestId: %s, code: %s, error: %s", resp.RequestId, resp.Code, resp.Message)
+	}
+
+	sCmd.TableNew.Append(cobrautil.Map2List(row, sCmd.Header))
+	sCmd.Result = row
+	sCmd.Error = cmderror.Success()
+	return nil
+}
+
+func (sCmd *SnapshotCmd) Print(cmd *cobra.Command, args []string) error {
+	return output.FinalCmdOutput(&sCmd.FinalCurveCmd, sCmd)
+}
+
+func (sCmd *SnapshotCmd) ResultPlainOutput() error {
+	return output.FinalCmdOutputPlain(&sCmd.FinalCurveCmd)
+}

tools-v2/pkg/cli/command/curvebs/create/volume/volume.go

@@ -0,0 +1,50 @@
+/*
+*  Copyright (c) 2023 NetEase Inc.
+*
+*  Licensed under the Apache License, Version 2.0 (the "License");
+*  you may not use this file except in compliance with the License.
+*  You may obtain a copy of the License at
+*
+*      http://www.apache.org/licenses/LICENSE-2.0
+*
+*  Unless required by applicable law or agreed to in writing, software
+*  distributed under the License is distributed on an "AS IS" BASIS,
+*  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+*  See the License for the specific language governing permissions and
+*  limitations under the License.
+ */
+/*
+* Project: CurveCli
+* Created Date: 2023-09-23
+* Author: baytan0720
+ */
+
+package volume
+
+import (
+	basecmd "github.com/opencurve/curve/tools-v2/pkg/cli/command"
+	"github.com/opencurve/curve/tools-v2/pkg/cli/command/curvebs/create/volume/snapshot"
+	"github.com/spf13/cobra"
+)
+
+type VolumeCommand struct {
+	basecmd.MidCurveCmd
+}
+
+var _ basecmd.MidCurveCmdFunc = (*VolumeCommand)(nil) // check interface
+
+func (vCmd *VolumeCommand) AddSubCommands() {
+	vCmd.Cmd.AddCommand(
+		snapshot.NewCommand(),
+	)
+}
+
+func NewVolumeCommand() *cobra.Command {
+	vCmd := &VolumeCommand{
+		basecmd.MidCurveCmd{
+			Use:   "volume",
+			Short: "create resources in the curvebs",
+		},
+	}
+	return basecmd.NewMidCurveCli(&vCmd.MidCurveCmd, vCmd)
+}

tools-v2/pkg/cli/command/curvebs/update/volume/flatten/flatten.go

@@ -69,8 +69,8 @@ func NewFlattenCmd() *FlattenCmd {
 func (fCmd *FlattenCmd) AddFlags() {
 	config.AddBsSnapshotCloneFlagOption(fCmd.Cmd)
 	config.AddHttpTimeoutFlag(fCmd.Cmd)
-	config.AddBsUserRequireFlag(fCmd.Cmd)
-	config.AddBsTaskIDRequireFlag(fCmd.Cmd)
+	config.AddBsUserRequiredFlag(fCmd.Cmd)
+	config.AddBsTaskIDRequiredFlag(fCmd.Cmd)
 }
 
 func (fCmd *FlattenCmd) Init(cmd *cobra.Command, args []string) error {

tools-v2/pkg/config/bs.go

@@ -147,11 +147,15 @@ const (
 	CURVEBS_DEFAULT_SNAPSHOT_ID       = "*"
 	CURVEBS_FAILED                    = "failed"
 	VIPER_CURVEBS_FAILED              = "curvebs.failed"
-	CURVEBS_CHUNK_SIZE				  = "chunksize"
-	VIPER_CURVEBS_CHUNK_SIZE		  = "curvebs.chunksize"
-	CURVEBS_CHECK_HASH				  = "checkhash"
-	VIPER_CURVEBS_CHECK_HASH		  = "curvebs.checkhash"
-	CURVEBS_DEFAULT_CHECK_HASH		  = false
+	CURVEBS_CHUNK_SIZE                = "chunksize"
+	VIPER_CURVEBS_CHUNK_SIZE          = "curvebs.chunksize"
+	CURVEBS_CHECK_HASH                = "checkhash"
+	VIPER_CURVEBS_CHECK_HASH          = "curvebs.checkhash"
+	CURVEBS_DEFAULT_CHECK_HASH        = false
+	CURVEBS_FILENAME                  = "filename"
+	VIPER_CURVEBS_FILENAME            = "curvebs.filename"
+	CURVEBS_SNAPSHOTNAME              = "snapshotname"
+	VIPER_CURVEBS_SNAPSHOTNAME        = "curvebs.snapshotname"
 )
 
 var (
@@ -207,8 +211,10 @@ var (
 		CURVEBS_TASKID:              VIPER_CURVEBS_TASKID,
 		CURVEBS_SNAPSHOT_ID:         VIPER_CURVEBS_SNAPSHOT_ID,
 		CURVEBS_FAILED:              VIPER_CURVEBS_FAILED,
-		CURVEBS_CHUNK_SIZE:			 VIPER_CURVEBS_CHUNK_SIZE,
-		CURVEBS_CHECK_HASH:			 VIPER_CURVEBS_CHECK_HASH,
+		CURVEBS_CHUNK_SIZE:          VIPER_CURVEBS_CHUNK_SIZE,
+		CURVEBS_CHECK_HASH:          VIPER_CURVEBS_CHECK_HASH,
+		CURVEBS_FILENAME:            VIPER_CURVEBS_FILENAME,
+		CURVEBS_SNAPSHOTNAME:        VIPER_CURVEBS_SNAPSHOTNAME,
 	}
 
 	BSFLAG2DEFAULT = map[string]interface{}{
@@ -232,7 +238,7 @@ var (
 		CURVEBS_ALL:            CURVEBS_DEFAULT_ALL,
 		CURVEBS_LOGIC_POOL_ID:  CURVEBS_DEFAULT_LOGIC_POOL_ID,
 		CURVEBS_COPYSET_ID:     CURVEBS_DEFAULT_COPYSET_ID,
-		CURVEBS_CHECK_HASH:		CURVEBS_DEFAULT_CHECK_HASH,
+		CURVEBS_CHECK_HASH:     CURVEBS_DEFAULT_CHECK_HASH,
 		CURVEBS_SNAPSHOT_ID:    CURVEBS_DEFAULT_SNAPSHOT_ID,
 	}
 )
@@ -663,11 +669,11 @@ func AddBsFailedOptionFlag(cmd *cobra.Command) {
 	AddBsBoolOptionFlag(cmd, CURVEBS_FAILED, "failed")
 }
 
-func AddBsUserRequireFlag(cmd *cobra.Command) {
+func AddBsUserRequiredFlag(cmd *cobra.Command) {
 	AddBsStringRequiredFlag(cmd, CURVEBS_USER, "user name")
 }
 
-func AddBsTaskIDRequireFlag(cmd *cobra.Command) {
+func AddBsTaskIDRequiredFlag(cmd *cobra.Command) {
 	AddBsStringRequiredFlag(cmd, CURVEBS_TASKID, "task id")
 }
 
@@ -679,6 +685,14 @@ func AddBsTaskTypeOptionFlag(cmd *cobra.Command) {
 	AddBsStringOptionFlag(cmd, CURVEBS_TYPE, "only query target type (clone or recover)")
 }
 
+func AddBsFileNameRequiredFlag(cmd *cobra.Command) {
+	AddBsStringRequiredFlag(cmd, CURVEBS_FILENAME, "file name")
+}
+
+func AddBsSnapshotNameRequiredFlag(cmd *cobra.Command) {
+	AddBsStringRequiredFlag(cmd, CURVEBS_SNAPSHOTNAME, "snapshot name")
+}
+
 // get stingslice flag
 func GetBsFlagStringSlice(cmd *cobra.Command, flagName string) []string {
 	var value []string