Skip to content

Commit

Permalink
Replace all occurances of __FUNCTION__ with __func__
Browse files Browse the repository at this point in the history 
Replace all occurs of __FUNCTION__ except for the check in checkpatch
with the non GCC specific __func__.

One line in hcd-musb.c was manually tweaked to pass checkpatch.

Signed-off-by: Alistair Francis <[email protected]>
Reviewed-by: Eric Blake <[email protected]>
Reviewed-by: Stefan Hajnoczi <[email protected]>
Reviewed-by: Anthony PERARD <[email protected]>
Reviewed-by: Juan Quintela <[email protected]>
Reviewed-by: Gerd Hoffmann <[email protected]>
[THH: Removed hunks related to pxa2xx_mmci.c (fixed already)]
Signed-off-by: Thomas Huth <[email protected]>
  • Loading branch information
@alistair23 @huth
alistair23 authored and huth committed Jan 22, 2018
1 parent 7d8b00f commit a89f364
Show file tree
Hide file tree
Showing 63 changed files with 269 additions and 269 deletions.
2 changes: 1 addition & 1 deletion hw/arm/nseries.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -463,7 +463,7 @@ static uint32_t mipid_txrx(void *opaque, uint32_t cmd, int len)
uint8_t ret;

if (len > 9) {
hw_error("%s: FIXME: bad SPI word width %i\n", __FUNCTION__, len);
hw_error("%s: FIXME: bad SPI word width %i\n", __func__, len);
}

if (s->p >= ARRAY_SIZE(s->resp)) {
Expand Down
42 changes: 21 additions & 21 deletions hw/arm/omap1.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -999,7 +999,7 @@ static uint64_t omap_id_read(void *opaque, hwaddr addr,
case omap1510:
return 0x03310115;
default:
hw_error("%s: bad mpu model\n", __FUNCTION__);
hw_error("%s: bad mpu model\n", __func__);
}
break;

Expand All @@ -1010,7 +1010,7 @@ static uint64_t omap_id_read(void *opaque, hwaddr addr,
case omap1510:
return 0xfb47002f;
default:
hw_error("%s: bad mpu model\n", __FUNCTION__);
hw_error("%s: bad mpu model\n", __func__);
}
break;
}
Expand Down Expand Up @@ -1716,7 +1716,7 @@ static void omap_clkm_write(void *opaque, hwaddr addr,
case 0x18: /* ARM_SYSST */
if ((s->clkm.clocking_scheme ^ (value >> 11)) & 7) {
s->clkm.clocking_scheme = (value >> 11) & 7;
printf("%s: clocking scheme set to %s\n", __FUNCTION__,
printf("%s: clocking scheme set to %s\n", __func__,
clkschemename[s->clkm.clocking_scheme]);
}
s->clkm.cold_start &= value & 0x3f;
Expand Down Expand Up @@ -2129,14 +2129,14 @@ qemu_irq *omap_mpuio_in_get(struct omap_mpuio_s *s)
void omap_mpuio_out_set(struct omap_mpuio_s *s, int line, qemu_irq handler)
{
if (line >= 16 || line < 0)
hw_error("%s: No GPIO line %i\n", __FUNCTION__, line);
hw_error("%s: No GPIO line %i\n", __func__, line);
s->handler[line] = handler;
}

void omap_mpuio_key(struct omap_mpuio_s *s, int row, int col, int down)
{
if (row >= 5 || row < 0)
hw_error("%s: No key %i-%i\n", __FUNCTION__, col, row);
hw_error("%s: No key %i-%i\n", __func__, col, row);

if (down)
s->buttons[row] |= 1 << col;
Expand Down Expand Up @@ -2313,7 +2313,7 @@ void omap_uwire_attach(struct omap_uwire_s *s,
uWireSlave *slave, int chipselect)
{
if (chipselect < 0 || chipselect > 3) {
fprintf(stderr, "%s: Bad chipselect %i\n", __FUNCTION__, chipselect);
fprintf(stderr, "%s: Bad chipselect %i\n", __func__, chipselect);
exit(-1);
}

Expand All @@ -2335,7 +2335,7 @@ static void omap_pwl_update(struct omap_pwl_s *s)

if (output != s->output) {
s->output = output;
printf("%s: Backlight now at %i/256\n", __FUNCTION__, output);
printf("%s: Backlight now at %i/256\n", __func__, output);
}
}

Expand Down Expand Up @@ -2473,7 +2473,7 @@ static void omap_pwt_write(void *opaque, hwaddr addr,
case 0x04: /* VRC */
if ((value ^ s->vrc) & 1) {
if (value & 1)
printf("%s: %iHz buzz on\n", __FUNCTION__, (int)
printf("%s: %iHz buzz on\n", __func__, (int)
/* 1.5 MHz from a 12-MHz or 13-MHz PWT_CLK */
((omap_clk_getrate(s->clk) >> 3) /
/* Pre-multiplexer divider */
Expand All @@ -2490,7 +2490,7 @@ static void omap_pwt_write(void *opaque, hwaddr addr,
((value & (1 << 5)) ? 80 : 127) /
(107 * 55 * 63 * 127)));
else
printf("%s: silence!\n", __FUNCTION__);
printf("%s: silence!\n", __func__);
}
s->vrc = value & 0x7f;
break;
Expand Down Expand Up @@ -2562,7 +2562,7 @@ static void omap_rtc_alarm_update(struct omap_rtc_s *s)
{
s->alarm_ti = mktimegm(&s->alarm_tm);
if (s->alarm_ti == -1)
printf("%s: conversion failed\n", __FUNCTION__);
printf("%s: conversion failed\n", __func__);
}

static uint64_t omap_rtc_read(void *opaque, hwaddr addr,
Expand Down Expand Up @@ -3028,7 +3028,7 @@ static void omap_mcbsp_source_tick(void *opaque)
if (!s->rx_rate)
return;
if (s->rx_req)
printf("%s: Rx FIFO overrun\n", __FUNCTION__);
printf("%s: Rx FIFO overrun\n", __func__);

s->rx_req = s->rx_rate << bps[(s->rcr[0] >> 5) & 7];

Expand Down Expand Up @@ -3074,7 +3074,7 @@ static void omap_mcbsp_sink_tick(void *opaque)
if (!s->tx_rate)
return;
if (s->tx_req)
printf("%s: Tx FIFO underrun\n", __FUNCTION__);
printf("%s: Tx FIFO underrun\n", __func__);

s->tx_req = s->tx_rate << bps[(s->xcr[0] >> 5) & 7];

Expand Down Expand Up @@ -3176,7 +3176,7 @@ static uint64_t omap_mcbsp_read(void *opaque, hwaddr addr,
/* Fall through. */
case 0x02: /* DRR1 */
if (s->rx_req < 2) {
printf("%s: Rx FIFO underrun\n", __FUNCTION__);
printf("%s: Rx FIFO underrun\n", __func__);
omap_mcbsp_rx_done(s);
} else {
s->tx_req -= 2;
Expand Down Expand Up @@ -3282,7 +3282,7 @@ static void omap_mcbsp_writeh(void *opaque, hwaddr addr,
if (s->tx_req < 2)
omap_mcbsp_tx_done(s);
} else
printf("%s: Tx FIFO overrun\n", __FUNCTION__);
printf("%s: Tx FIFO overrun\n", __func__);
return;

case 0x08: /* SPCR2 */
Expand All @@ -3297,7 +3297,7 @@ static void omap_mcbsp_writeh(void *opaque, hwaddr addr,
s->spcr[0] &= 0x0006;
s->spcr[0] |= 0xf8f9 & value;
if (value & (1 << 15)) /* DLB */
printf("%s: Digital Loopback mode enable attempt\n", __FUNCTION__);
printf("%s: Digital Loopback mode enable attempt\n", __func__);
if (~value & 1) { /* RRST */
s->spcr[0] &= ~6;
s->rx_req = 0;
Expand Down Expand Up @@ -3330,13 +3330,13 @@ static void omap_mcbsp_writeh(void *opaque, hwaddr addr,
s->mcr[1] = value & 0x03e3;
if (value & 3) /* XMCM */
printf("%s: Tx channel selection mode enable attempt\n",
__FUNCTION__);
__func__);
return;
case 0x1a: /* MCR1 */
s->mcr[0] = value & 0x03e1;
if (value & 1) /* RMCM */
printf("%s: Rx channel selection mode enable attempt\n",
__FUNCTION__);
__func__);
return;
case 0x1c: /* RCERA */
s->rcer[0] = value & 0xffff;
Expand Down Expand Up @@ -3418,7 +3418,7 @@ static void omap_mcbsp_writew(void *opaque, hwaddr addr,
if (s->tx_req < 4)
omap_mcbsp_tx_done(s);
} else
printf("%s: Tx FIFO overrun\n", __FUNCTION__);
printf("%s: Tx FIFO overrun\n", __func__);
return;
}

Expand Down Expand Up @@ -3536,7 +3536,7 @@ static void omap_lpg_tick(void *opaque)
timer_mod(s->tm, qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + s->on);

s->cycle = !s->cycle;
printf("%s: LED is %s\n", __FUNCTION__, s->cycle ? "on" : "off");
printf("%s: LED is %s\n", __func__, s->cycle ? "on" : "off");
}

static void omap_lpg_update(struct omap_lpg_s *s)
Expand All @@ -3557,9 +3557,9 @@ static void omap_lpg_update(struct omap_lpg_s *s)

timer_del(s->tm);
if (on == period && s->on < s->period)
printf("%s: LED is on\n", __FUNCTION__);
printf("%s: LED is on\n", __func__);
else if (on == 0 && s->on)
printf("%s: LED is off\n", __FUNCTION__);
printf("%s: LED is off\n", __func__);
else if (on && (on != s->on || period != s->period)) {
s->cycle = 0;
s->on = on;
Expand Down
12 changes: 6 additions & 6 deletions hw/arm/omap2.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1312,7 +1312,7 @@ static void omap_prcm_apll_update(struct omap_prcm_s *s)

if (mode[0] == 1 || mode[0] == 2 || mode[1] == 1 || mode[1] == 2)
fprintf(stderr, "%s: bad EN_54M_PLL or bad EN_96M_PLL\n",
__FUNCTION__);
__func__);
}

static void omap_prcm_dpll_update(struct omap_prcm_s *s)
Expand All @@ -1331,7 +1331,7 @@ static void omap_prcm_dpll_update(struct omap_prcm_s *s)
s->dpll_lock = 0;
switch (mode) {
case 0:
fprintf(stderr, "%s: bad EN_DPLL\n", __FUNCTION__);
fprintf(stderr, "%s: bad EN_DPLL\n", __func__);
break;
case 1: /* Low-power bypass mode (Default) */
case 2: /* Fast-relock bypass mode */
Expand All @@ -1358,7 +1358,7 @@ static void omap_prcm_dpll_update(struct omap_prcm_s *s)
omap_clk_reparent(core, dpll_x2);
break;
case 3:
fprintf(stderr, "%s: bad CORE_CLK_SRC\n", __FUNCTION__);
fprintf(stderr, "%s: bad CORE_CLK_SRC\n", __func__);
break;
}
}
Expand Down Expand Up @@ -1628,7 +1628,7 @@ static void omap_prcm_write(void *opaque, hwaddr addr,
case 0x500: /* CM_CLKEN_PLL */
if (value & 0xffffff30)
fprintf(stderr, "%s: write 0s in CM_CLKEN_PLL for "
"future compatibility\n", __FUNCTION__);
"future compatibility\n", __func__);
if ((s->clken[9] ^ value) & 0xcc) {
s->clken[9] &= ~0xcc;
s->clken[9] |= value & 0xcc;
Expand All @@ -1647,7 +1647,7 @@ static void omap_prcm_write(void *opaque, hwaddr addr,
case 0x540: /* CM_CLKSEL1_PLL */
if (value & 0xfc4000d7)
fprintf(stderr, "%s: write 0s in CM_CLKSEL1_PLL for "
"future compatibility\n", __FUNCTION__);
"future compatibility\n", __func__);
if ((s->clksel[5] ^ value) & 0x003fff00) {
s->clksel[5] = value & 0x03bfff28;
omap_prcm_dpll_update(s);
Expand All @@ -1659,7 +1659,7 @@ static void omap_prcm_write(void *opaque, hwaddr addr,
case 0x544: /* CM_CLKSEL2_PLL */
if (value & ~3)
fprintf(stderr, "%s: write 0s in CM_CLKSEL2_PLL[31:2] for "
"future compatibility\n", __FUNCTION__);
"future compatibility\n", __func__);
if (s->clksel[6] != (value & 3)) {
s->clksel[6] = value & 3;
omap_prcm_dpll_update(s);
Expand Down
14 changes: 7 additions & 7 deletions hw/arm/palm.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -44,7 +44,7 @@ static void static_write(void *opaque, hwaddr offset, uint64_t value,
{
#ifdef SPY
printf("%s: value %08lx written at " PA_FMT "\n",
__FUNCTION__, value, offset);
__func__, value, offset);
#endif
}

Expand Down Expand Up @@ -127,24 +127,24 @@ static void palmte_onoff_gpios(void *opaque, int line, int level)
switch (line) {
case 0:
printf("%s: current to MMC/SD card %sabled.\n",
__FUNCTION__, level ? "dis" : "en");
__func__, level ? "dis" : "en");
break;
case 1:
printf("%s: internal speaker amplifier %s.\n",
__FUNCTION__, level ? "down" : "on");
__func__, level ? "down" : "on");
break;

/* These LCD & Audio output signals have not been identified yet. */
case 2:
case 3:
case 4:
printf("%s: LCD GPIO%i %s.\n",
__FUNCTION__, line - 1, level ? "high" : "low");
__func__, line - 1, level ? "high" : "low");
break;
case 5:
case 6:
printf("%s: Audio GPIO%i %s.\n",
__FUNCTION__, line - 4, level ? "high" : "low");
__func__, line - 4, level ? "high" : "low");
break;
}
}
Expand Down Expand Up @@ -234,7 +234,7 @@ static void palmte_init(MachineState *machine)
rom_size = get_image_size(option_rom[0].name);
if (rom_size > flash_size) {
fprintf(stderr, "%s: ROM image too big (%x > %x)\n",
__FUNCTION__, rom_size, flash_size);
__func__, rom_size, flash_size);
rom_size = 0;
}
if (rom_size > 0) {
Expand All @@ -244,7 +244,7 @@ static void palmte_init(MachineState *machine)
}
if (rom_size < 0) {
fprintf(stderr, "%s: error loading '%s'\n",
__FUNCTION__, option_rom[0].name);
__func__, option_rom[0].name);
}
}

Expand Down
Loading

0 comments on commit a89f364

Please sign in to comment.