Is there a difference between what the getMultiRotorState API returns and the px4 internal position estimate? #2678

I am running airsim with PX4 sitl and mavros to access the sensor data and control a simulated drone.

I have a question about how the values returned from the getMultiRotorState method used in airsim_node rosnode might differ from what could be retrieved when subscribing to the fcu local_position estimate provided by mavros.

In my simulation, airsim node publishes a topic /airsim_node/PX4/odom_local_ned, while mavros publishes a topic ~/mavros/local_position/pose.

My understanding is that airsim uses the getMultiRotorState method to get the latest estimated kinematic state of the drone.

The mavros topic should be returning the latest position estimate as calculated by the simulated flight controller, which would be the internal position estimate.

What is the relationship, if any, between these two sources, apart from a frame conversion from NED to ENU? Is the latest kinematic state based on the most recent actuator control outputs from the flight controller, which would have been generated based on the fcu internal position estimate and current setpoint goals?

Or, when using PX4 based sitl simulation, is the getMultiRotorState returning the ground truth position of the model, and the mavros topic provides the estimated position of the model as generated by the flight controller?