Skip to content
hpheuerPublic

About

GCP Analysis for Lotto und Euro-Lotto

Resources

Stars

0 stars

Watchers

0 watching

Forks

Repository files navigation

E-Lotto — GCP Analysis on ESP32-P4

Four-node ESP32-P4 array that scores Eurojackpot and 6-of-49 combinations from camera photon noise using GCP methodology.

Rules and operator contract: CLAUDE.md · Evidence: docs/DECISIONS.md · Snapshot: docs/STATUS.md

Authors

hpheuer Design, hardware, experiment, repository
Grok (xAI) Co-author — implementation, OTA validation, docs (Grok Build)

Abstract

A home-built GCP/PEAR-style instrument: each node draws bits from its own camera (OV5647 or IMX219, never shared). Frame-pair diff → LSB → segments of 224 bits → Stouffer z. LSB bits as measured. Up to four nodes combine as Σz/√k for the nodes that answered that run. Ranking is Z* = (Z/σ) times the four factors Δn, Mau, Conc and AC (?kdn= ?kmau= ?kconc= ?kac=, each 0..1, default 0). Scoring uses the same product. The HTML page shows the number or combination being measured. Sessions are unattended; do not pool with old focus=on archives.

This cannot predict lottery draws. Output is an experiment on physical randomness, not a betting tip. The ×√n array gain is not established — read pass_σ and the pairwise matrix before any table (CLAUDE.md).

In a Nutshell (v3)

  • Rounds until Abort: score → measure a cap-sized pool → re-score. No loops, no ranking modes.
  • Window: ?run= 0,5–5 s (default 5); actual wall time is focus_win_ms (slowest node).
  • Blocks: one round = one block (?maxruns=, default 100). Sweep, centre, drift, pairwise, soft-down at the round boundary.
  • UI: parameter line from /status, one sortable Top-10 (Z*, Z, Conc, Δn), jump board, GCP health line (pass_σ, v_eff, |r|√n). A session is a closed unit: no export, no comparison across sessions.
  • Illumination: tools/tune.html — live per-node linearity/sweep board (idle only).

Screenshots

Start Session Results
start session results

Hardware

node address role
master 192.168.178.100 web UI, session, combine
slave0 192.168.178.103 measure
slave1 192.168.178.145 measure
slave2 192.168.178.155 measure

All four: Waveshare ESP32-P4-ETH, PoE, own OV5647, lit enclosure (not dark). Never power the lamp from a node's VSYS. UDP discovery on port 5000 — addresses are informational. PSRAM mandatory. USB = recovery only.

Build & Flash

`powershell cd D:\E-Lotto\elotto .\build.ps1 build # master .\build.ps1 -C../elotto_slave build # slave .\build.ps1 -C ota_firmware build # factory updater

curl.exe http://192.168.178.100/update --data-binary @build/elotto.bin curl.exe http://192.168.178.103/update --data-binary @../elotto_slave/build/elotto_slave.bin

same for.145 /.155 — abort any session first (409 while running)

`

After OTA, poll fw_sha in /status until it changes. Fresh board: USB erase-flash of ota_firmware, then Ethernet forever. Details, recovery, diagnostics: CLAUDE.md.

Project structure

main/ elotto.c (UI/HTTP), sensor.c/h, nodes.c/h, focus.c components/ elotto_camera, elotto_gcp, elotto_link, elotto_ota (shared with slave) ota_firmware/ recovery image (factory) tools/ tune.html (live illumination board) docs/ DECISIONS.md, STATUS.md; PLAN.md / PLAN_HISTORY.md (stubs → git); data/

Slave repo must sit next to this one (EXTRA_COMPONENT_DIRS=../elotto/components).

Version History

v3 / D67 Rounds until Abort; block = round; LSB z + centred-half concordance; sortable Top-10. Contract: CLAUDE.md. Never pool with prior-instrument sessions or v2.x.

About

GCP Analysis for Lotto und Euro-Lotto

Resources

Stars

0 stars

Watchers

0 watching

Forks

Releases

Packages

Contributors

Languages