build(deps): bump the otel group with 4 updates

[dependabot]

Bumps the otel group with 4 updates: github.com/open-telemetry/opentelemetry-collector-contrib/pkg/translator/jaeger, go.opentelemetry.io/collector/consumer, go.opentelemetry.io/collector/pdata and go.opentelemetry.io/collector/semconv.

Updates github.com/open-telemetry/opentelemetry-collector-contrib/pkg/translator/jaeger from 0.115.0 to 0.116.0

Release notes

Sourced from github.com/open-telemetry/opentelemetry-collector-contrib/pkg/translator/jaeger's releases.

v0.116.0

The OpenTelemetry Collector Contrib contains everything in the opentelemetry-collector release, be sure to check the release notes there as well.

Unmaintained Components

These components are marked as Unmaintained and will eventually be removed from our community distributions. If you depend on these components we need your help to support them.

• exporter/kineticaexporter/
• exporter/opensearchexporter/
• extension/observer/ecstaskobserver/
• receiver/jmxreceiver/

End User Changelog

🛑 Breaking changes 🛑

• jsonlogencodingextension: Change how logs are marshaled. Instead of marshaling just the first log, marshal all logs into a JSON array. (#34064)

• githubreceiver: Update metric names to match VCS Metric Semantic Conventions and scraper key name. (#36714)

  • Change the github scraper key to scraper
  • Add vcs.repository.url.full attribute
  • Change attribute repository.name to vcs.repository.name
  • Change attribute ref.name to vcs.ref.head.name
  • Change attribute ref.type to vcs.ref.head.type
  • Change attribute change.state to vcs.change.state
  • Add attribute vcs.revision_delta.direction with ahead and behind values
  • Change metric vcs.repository.ref.revisions_ahead to vcs.ref.revisions_delta with vcs.revision_delta.direction=ahead
  • Change metric vcs.repository.ref.revisions_behind to vcs.ref.revisions_delta with vcs.revision_delta.direction=behind
  • Change metric vcs.repository.ref.count to vcs.ref.count
  • Change metric vcs.repository.ref.time to vcs.ref.time
  • Add attribute vcs.line_change.type with added and removed values
  • Change metric vcs.repository.ref.lines_added to vcs.ref.lines_delta with vcs.line_change.type=added
  • Change metric vcs.repository.ref.lines_removed to vcs.ref.lines_delta with vcs.line_change.type=removed
  • Change metric vcs.repository.contributor.count to vcs.contributor.count
  • Change metric vcs.repository.change.time_open to vcs.change.duration with vcs.change.state=open
  • Change metric vcs.repository.change.time_to_approval to vcs.change.time_to_approval
  • Change metric vcs.repository.change.time_to_merge to vcs.change.time_to_merge
  • Change metric vcs.repository.change.count to vcs.change.count

• processor/tailsampling: Reverts #33671, allowing for composite policies to specify inverted clauses in conjunction with other policies. This is a change bringing the previous state into place, breaking users who rely on what was introduced as part of #33671. (#34085)

🚩 Deprecations 🚩

• connector/routing: Deprecate match_once parameter. (#29882)

• routingprocessor: Deprecated in favor of the routing connector. (#36616)

• splunkhecexporter: Add otel_attrs_to_hec_metadata/* config fields to replace hec_metadata_to_otel_attrs/* fields. (#35092) otel_attrs_to_hec_metadata/* config fields will replace the hec_metadata_to_otel_attrs/* fields in a later release.

• kineticaexporter: The kineticaexporter is now Unmaintained as it has no active code owners from the vendor (#36808)

🚀 New components 🚀

... (truncated)

Changelog

Sourced from github.com/open-telemetry/opentelemetry-collector-contrib/pkg/translator/jaeger's changelog.

v0.116.0

🚩 Deprecations 🚩

• routingprocessor: Deprecated in favor of the routing connector. (#36616)

💡 Enhancements 💡

• pkg/ottl: Add the ottl.ParserCollection utility to help handling parsers for multiple OTTL contexts (#29017) The ottl.ParserCollection groups contexts' ottl.Parsers, choosing the suitable one to parse a given statement. It supports context inference using the given statements, and allows prepending the context name to the statements' paths.

Commits

• 2839359 [chore] Prepare release 0.116.0 (#36864)
• defc07b chore: [receiver/hostmetrics] Fix integration tests (#36847)
• 36945ee [chore] Prepare release v0.116.0 (#36863)
• 1a43701 [chore] switch to ubuntu 24.04 to identify breaking changes (#36839)
• ddfadc2 [opampsupervisor] avoid nil pointer access when reporting remote config statu...
• 1f10e2d Trigger windows e2e tests when windows-related files change (#36857)
• 43d345e [extension/sumologic] Skip zombie processes on Windows (#36772)
• 8be3693 [chore] make update-otel (#36851)
• d1135ca [jaegerreceiver] Remove ineffectual warning log (#36831)
• a8821cd [chore] make update-otel should commit tidy changes (#36855)
• Additional commits viewable in compare view

Updates go.opentelemetry.io/collector/consumer from 1.21.0 to 1.22.0

Release notes

Sourced from go.opentelemetry.io/collector/consumer's releases.

v1.17.0/v0.111.0

Images and binaries here: https://github.com/open-telemetry/opentelemetry-collector-releases/releases/tag/v0.111.0

🆕 The binary release adds a new OTLP-only distro. Feel free to leave us feedback on this new distro on the opentelemetry-collector-releases issue tracker.

End User Changelog

🐛 Known bugs 🐛

• The ocb binary has an identified bug caused by the fact that some of the providers have been marked stable and the default providers in the ocb binary still use the unstable version. In order to fix this explicitly add the default providers in your otel builder config, if not already configured:

providers:
  - gomod: go.opentelemetry.io/collector/confmap/provider/envprovider v1.17.0
  - gomod: go.opentelemetry.io/collector/confmap/provider/fileprovider v1.17.0
  - gomod: go.opentelemetry.io/collector/confmap/provider/httpprovider v1.17.0
  - gomod: go.opentelemetry.io/collector/confmap/provider/httpsprovider v1.17.0
  - gomod: go.opentelemetry.io/collector/confmap/provider/yamlprovider v1.17.0

This release removes the logging exporter. See #11337 to migrate to the debug exporter.

🛑 Breaking changes 🛑

• service/telemetry: Change default metrics address to "localhost:8888" instead of ":8888" (#11251) This behavior can be disabled by disabling the feature gate telemetry.UseLocalHostAsDefaultMetricsAddress.
• loggingexporter: Removed the deprecated logging exporter. Use the debug exporter instead. (#11037). You can read issue #11337 for migration instructions.

🚩 Deprecations 🚩

• service/telemetry: Deprecate service::telemetry::metrics::address in favor of service::telemetry::metrics::readers. (#11205)
• processorhelper: Deprecate BuildProcessorMetricName as it's no longer needed since introduction of mdatagen (#11302)

💡 Enhancements 💡

• ocb: create docker images for OCB, per open-telemetry/opentelemetry-collector-releases#671 (#5712) Adds standard Docker images for OCB to Dockerhub and GitHub, see hub.docker.com/r/otel/opentelemetry-collector-builder
• confighttp: Snappy compression to lazy read for memory efficiency (#11177)
• httpsprovider: Mark the httpsprovider as stable. (#11191)
• httpprovider: Mark the httpprovider as stable. (#11191)
• yamlprovider: Mark the yamlprovider as stable. (#11192)
• confmap: Allow using any YAML structure as a string when loading configuration including time.Time formats (#10659) Previously, fields with time.Time formats could not be used as strings in configurations

🧰 Bug fixes 🧰

• processorhelper: Fix data race condition, concurrent writes to the err variable, causes UB (Undefined Behavior) (#11350)
• cmd/builder: re-adds function to properly set and view version number of OpenTelemetry Collector Builder (ocb) binaries (#11208)
• pdata: Unmarshal Span and SpanLink flags from JSON (#11267)

... (truncated)

Changelog

Sourced from go.opentelemetry.io/collector/consumer's changelog.

v1.22.0/v0.116.0

🛑 Breaking changes 🛑

• component: Remove deprecated TelemetrySettings.LeveledMeterProvider (#11811)
• scraperhelper: Remove deprecated scraperhelper.Scraper and helpers (#11803)

🚩 Deprecations 🚩

• connector: Deprecate connectorprofiles module in favor of xconnector to allow adding more experimental data types. (#11778)
• consumererror: Deprecate consumererrorprofiles module in favor of xconsumererror to allow adding more experimental data types. (#11778)
• consumer: Deprecate consumerprofiles module in favor of xconsumer to allow adding more experimental data types. (#11778)
• exporterhelper: Deprecate exporterhelperprofiles module in favor of xexporterhelper to allow adding more experimental data types. (#11778)
• exporter: Deprecate exporterprofiles module in favor of xexporter to allow adding more experimental data types. (#11778)
• pipeline: Deprecate pipelineprofiles module in favor of xpipeline to allow adding more experimental data types. (#11778)
• processorhelper: Deprecate processorhelperprofiles module in favor of xprocessorhelper to allow adding more experimental data types. (#11778)
• processor: Deprecate processorprofiles module in favor of xprocessor to allow adding more experimental data types. (#11778)
• receiver: Deprecate receiverprofiles module in favor of xreceiver to allow adding more experimental data types. (#11778)
• receiver/scrapererror: Remove the receiver/scrapererror alias. (#11003)

💡 Enhancements 💡

• receiver/scraperhelper: Add scraper for logs (#11238)

Commits

• 095b183 [chore] Prepare release v1.22.0/v0.116.0 (#11910)
• 96a3ad1 [chore] put back replace and add new packages in builder yaml (#11909)
• 6a47030 [chore][release.md] mention release blockers (#11908)
• 00852e3 Bump golang.org/x/crypto from 0.30.0 to 0.31.0 in /internal/tools (#11903)
• 26f0fcf [chore] [docs/component-stability.md] Document relationship between versionin...
• 8ac40a0 Define observability requirements for stable components (#11772)
• cef6ce5 [chore] Update versions of the new experimental modules (#11897)
• 6147243 [chore] Update version of all new experimental modules to latest commit (#11894)
• 5da51fa [README] links caption (#11893)
• e9bc4bd Deprecate connectorprofiles module in favor of xconnector (#11887)
• Additional commits viewable in compare view

Updates go.opentelemetry.io/collector/pdata from 1.21.0 to 1.22.0

Release notes

Sourced from go.opentelemetry.io/collector/pdata's releases.

v1.17.0/v0.111.0

Images and binaries here: https://github.com/open-telemetry/opentelemetry-collector-releases/releases/tag/v0.111.0

🆕 The binary release adds a new OTLP-only distro. Feel free to leave us feedback on this new distro on the opentelemetry-collector-releases issue tracker.

End User Changelog

🐛 Known bugs 🐛

• The ocb binary has an identified bug caused by the fact that some of the providers have been marked stable and the default providers in the ocb binary still use the unstable version. In order to fix this explicitly add the default providers in your otel builder config, if not already configured:

providers:
  - gomod: go.opentelemetry.io/collector/confmap/provider/envprovider v1.17.0
  - gomod: go.opentelemetry.io/collector/confmap/provider/fileprovider v1.17.0
  - gomod: go.opentelemetry.io/collector/confmap/provider/httpprovider v1.17.0
  - gomod: go.opentelemetry.io/collector/confmap/provider/httpsprovider v1.17.0
  - gomod: go.opentelemetry.io/collector/confmap/provider/yamlprovider v1.17.0

This release removes the logging exporter. See #11337 to migrate to the debug exporter.

🛑 Breaking changes 🛑

• service/telemetry: Change default metrics address to "localhost:8888" instead of ":8888" (#11251) This behavior can be disabled by disabling the feature gate telemetry.UseLocalHostAsDefaultMetricsAddress.
• loggingexporter: Removed the deprecated logging exporter. Use the debug exporter instead. (#11037). You can read issue #11337 for migration instructions.

🚩 Deprecations 🚩

• service/telemetry: Deprecate service::telemetry::metrics::address in favor of service::telemetry::metrics::readers. (#11205)
• processorhelper: Deprecate BuildProcessorMetricName as it's no longer needed since introduction of mdatagen (#11302)

💡 Enhancements 💡

• ocb: create docker images for OCB, per open-telemetry/opentelemetry-collector-releases#671 (#5712) Adds standard Docker images for OCB to Dockerhub and GitHub, see hub.docker.com/r/otel/opentelemetry-collector-builder
• confighttp: Snappy compression to lazy read for memory efficiency (#11177)
• httpsprovider: Mark the httpsprovider as stable. (#11191)
• httpprovider: Mark the httpprovider as stable. (#11191)
• yamlprovider: Mark the yamlprovider as stable. (#11192)
• confmap: Allow using any YAML structure as a string when loading configuration including time.Time formats (#10659) Previously, fields with time.Time formats could not be used as strings in configurations

🧰 Bug fixes 🧰

• processorhelper: Fix data race condition, concurrent writes to the err variable, causes UB (Undefined Behavior) (#11350)
• cmd/builder: re-adds function to properly set and view version number of OpenTelemetry Collector Builder (ocb) binaries (#11208)
• pdata: Unmarshal Span and SpanLink flags from JSON (#11267)

... (truncated)

Changelog

Sourced from go.opentelemetry.io/collector/pdata's changelog.

v1.22.0/v0.116.0

🛑 Breaking changes 🛑

• component: Remove deprecated TelemetrySettings.LeveledMeterProvider (#11811)
• scraperhelper: Remove deprecated scraperhelper.Scraper and helpers (#11803)

🚩 Deprecations 🚩

• connector: Deprecate connectorprofiles module in favor of xconnector to allow adding more experimental data types. (#11778)
• consumererror: Deprecate consumererrorprofiles module in favor of xconsumererror to allow adding more experimental data types. (#11778)
• consumer: Deprecate consumerprofiles module in favor of xconsumer to allow adding more experimental data types. (#11778)
• exporterhelper: Deprecate exporterhelperprofiles module in favor of xexporterhelper to allow adding more experimental data types. (#11778)
• exporter: Deprecate exporterprofiles module in favor of xexporter to allow adding more experimental data types. (#11778)
• pipeline: Deprecate pipelineprofiles module in favor of xpipeline to allow adding more experimental data types. (#11778)
• processorhelper: Deprecate processorhelperprofiles module in favor of xprocessorhelper to allow adding more experimental data types. (#11778)
• processor: Deprecate processorprofiles module in favor of xprocessor to allow adding more experimental data types. (#11778)
• receiver: Deprecate receiverprofiles module in favor of xreceiver to allow adding more experimental data types. (#11778)
• receiver/scrapererror: Remove the receiver/scrapererror alias. (#11003)

💡 Enhancements 💡

• receiver/scraperhelper: Add scraper for logs (#11238)

Commits

• 095b183 [chore] Prepare release v1.22.0/v0.116.0 (#11910)
• 96a3ad1 [chore] put back replace and add new packages in builder yaml (#11909)
• 6a47030 [chore][release.md] mention release blockers (#11908)
• 00852e3 Bump golang.org/x/crypto from 0.30.0 to 0.31.0 in /internal/tools (#11903)
• 26f0fcf [chore] [docs/component-stability.md] Document relationship between versionin...
• 8ac40a0 Define observability requirements for stable components (#11772)
• cef6ce5 [chore] Update versions of the new experimental modules (#11897)
• 6147243 [chore] Update version of all new experimental modules to latest commit (#11894)
• 5da51fa [README] links caption (#11893)
• e9bc4bd Deprecate connectorprofiles module in favor of xconnector (#11887)
• Additional commits viewable in compare view

Updates go.opentelemetry.io/collector/semconv from 0.115.0 to 0.116.0

Release notes

Sourced from go.opentelemetry.io/collector/semconv's releases.

v0.116.0

Images and binaries here: https://github.com/open-telemetry/opentelemetry-collector-releases/releases/tag/v0.116.0

End User Changelog

v1.22.0/v0.116.0

🛑 Breaking changes 🛑

• pdata/pprofile: Remove deprecated Profile.EndTime and Profile.SetEndTime methods. (#11796)

💡 Enhancements 💡

• xconfighttp: Add WithOtelHTTPOptions to experimental module xconfighttp (#11770)

🧰 Bug fixes 🧰

• exporterhelper: Fix memory leak at exporter shutdown (#11401)
• sharedcomponent: Remove race-condition and cleanup locking (#11819)

API Changelog

v1.22.0/v0.116.0

🛑 Breaking changes 🛑

• component: Remove deprecated TelemetrySettings.LeveledMeterProvider (#11811)
• scraperhelper: Remove deprecated scraperhelper.Scraper and helpers (#11803)

🚩 Deprecations 🚩

• connector: Deprecate connectorprofiles module in favor of xconnector to allow adding more experimental data types. (#11778)
• consumererror: Deprecate consumererrorprofiles module in favor of xconsumererror to allow adding more experimental data types. (#11778)
• consumer: Deprecate consumerprofiles module in favor of xconsumer to allow adding more experimental data types. (#11778)
• exporterhelper: Deprecate exporterhelperprofiles module in favor of xexporterhelper to allow adding more experimental data types. (#11778)
• exporter: Deprecate exporterprofiles module in favor of xexporter to allow adding more experimental data types. (#11778)
• pipeline: Deprecate pipelineprofiles module in favor of xpipeline to allow adding more experimental data types. (#11778)
• processorhelper: Deprecate processorhelperprofiles module in favor of xprocessorhelper to allow adding more experimental data types. (#11778)
• processor: Deprecate processorprofiles module in favor of xprocessor to allow adding more experimental data types. (#11778)
• receiver: Deprecate receiverprofiles module in favor of xreceiver to allow adding more experimental data types. (#11778)
• receiver/scrapererror: Remove the receiver/scrapererror alias. (#11003)

💡 Enhancements 💡

• receiver/scraperhelper: Add scraper for logs (#11238)

Changelog

Sourced from go.opentelemetry.io/collector/semconv's changelog.

v1.22.0/v0.116.0

🛑 Breaking changes 🛑

• component: Remove deprecated TelemetrySettings.LeveledMeterProvider (#11811)
• scraperhelper: Remove deprecated scraperhelper.Scraper and helpers (#11803)

🚩 Deprecations 🚩

• connector: Deprecate connectorprofiles module in favor of xconnector to allow adding more experimental data types. (#11778)
• consumererror: Deprecate consumererrorprofiles module in favor of xconsumererror to allow adding more experimental data types. (#11778)
• consumer: Deprecate consumerprofiles module in favor of xconsumer to allow adding more experimental data types. (#11778)
• exporterhelper: Deprecate exporterhelperprofiles module in favor of xexporterhelper to allow adding more experimental data types. (#11778)
• exporter: Deprecate exporterprofiles module in favor of xexporter to allow adding more experimental data types. (#11778)
• pipeline: Deprecate pipelineprofiles module in favor of xpipeline to allow adding more experimental data types. (#11778)
• processorhelper: Deprecate processorhelperprofiles module in favor of xprocessorhelper to allow adding more experimental data types. (#11778)
• processor: Deprecate processorprofiles module in favor of xprocessor to allow adding more experimental data types. (#11778)
• receiver: Deprecate receiverprofiles module in favor of xreceiver to allow adding more experimental data types. (#11778)
• receiver/scrapererror: Remove the receiver/scrapererror alias. (#11003)

💡 Enhancements 💡

• receiver/scraperhelper: Add scraper for logs (#11238)

Commits

• 095b183 [chore] Prepare release v1.22.0/v0.116.0 (#11910)
• 96a3ad1 [chore] put back replace and add new packages in builder yaml (#11909)
• 6a47030 [chore][release.md] mention release blockers (#11908)
• 00852e3 Bump golang.org/x/crypto from 0.30.0 to 0.31.0 in /internal/tools (#11903)
• 26f0fcf [chore] [docs/component-stability.md] Document relationship between versionin...
• 8ac40a0 Define observability requirements for stable components (#11772)
• cef6ce5 [chore] Update versions of the new experimental modules (#11897)
• 6147243 [chore] Update version of all new experimental modules to latest commit (#11894)
• 5da51fa [README] links caption (#11893)
• e9bc4bd Deprecate connectorprofiles module in favor of xconnector (#11887)
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
• @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
• @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
• @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
• @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions