adding a C project to the C folder

C/Project-pv in C/.vscode/settings.json

@@ -0,0 +1,6 @@
+{
+    "files.associations": {
+        "render_nembers.h": "c",
+        "order.h": "c"
+    }
+}

C/Project-pv in C/bin/sdl2-config

@@ -0,0 +1,60 @@
+#!/bin/sh
+
+prefix=/opt/local/i686-w64-mingw32
+exec_prefix=${prefix}
+exec_prefix_set=no
+libdir=${exec_prefix}/lib
+
+#usage="\
+#Usage: $0 [--prefix[=DIR]] [--exec-prefix[=DIR]] [--version] [--cflags] [--libs]"
+usage="\
+Usage: $0 [--prefix[=DIR]] [--exec-prefix[=DIR]] [--version] [--cflags] [--libs] [--static-libs]"
+
+if test $# -eq 0; then
+      echo "${usage}" 1>&2
+      exit 1
+fi
+
+while test $# -gt 0; do
+  case "$1" in
+  -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  case $1 in
+    --prefix=*)
+      prefix=$optarg
+      if test $exec_prefix_set = no ; then
+        exec_prefix=$optarg
+      fi
+      ;;
+    --prefix)
+      echo $prefix
+      ;;
+    --exec-prefix=*)
+      exec_prefix=$optarg
+      exec_prefix_set=yes
+      ;;
+    --exec-prefix)
+      echo $exec_prefix
+      ;;
+    --version)
+      echo 2.0.18
+      ;;
+    --cflags)
+      echo -I${prefix}/include/SDL2  -Dmain=SDL_main
+      ;;
+    --libs)
+      echo -L${exec_prefix}/lib  -lmingw32 -lSDL2main -lSDL2 -mwindows
+      ;;
+    --static-libs)
+#    --libs|--static-libs)
+      echo -L${exec_prefix}/lib -lmingw32 -lSDL2main -lSDL2 -mwindows  -Wl,--dynamicbase -Wl,--nxcompat -lm -ldinput8 -ldxguid -ldxerr8 -luser32 -lgdi32 -lwinmm -limm32 -lole32 -loleaut32 -lshell32 -lsetupapi -lversion -luuid
+      ;;
+    *)
+      echo "${usage}" 1>&2
+      exit 1
+      ;;
+  esac
+  shift
+done

C/Project-pv in C/desctiption of the project.md

@@ -0,0 +1,5 @@
+this is an C graphic programme using the sdl library
+the goal of this program is to make resummit of the meeting
+(date of the meeting /participants /the important points ext...)
+
+git hub username: chafaaouchaou

C/Project-pv in C/doc.txt

@@ -0,0 +1,32 @@
+But de reunion : 
+jbwswdbshdjhkqbsdjbhqjdbqhsd
+
+date et heure de reunion : 
+qskjhdjkqshdjkhbqjhsbdqbd
+
+les membres present a la reunion : 
+kjqshdjkqsjhdhjqbdqs
+kqjsdlkqhdjqbshbdqsh
+jkhsqdklhqdjkqsjkhd
+qdjkqhdjkhqjkhdlkqhs
+kqjsjhdjkhdjkqjldjkq
+
+les points abordes : 
+kjqshdjkhqsldlkqjshldjqhpdqlhdlkqhdlkqshldkqqjdpqdkjqd
+jkhsqdlkhqdjkqd
+
+
+les decisions prises : 
+
+
+
+
+les taches attribues : 
+qskldklqhdkjhkjhdqsd
+
+jsqhdjkhqkjsdjkqhdjkqjqdqlkdjkqdj
+
+
+
+l'heur de fin de la reunion 
+le 2iijsjj jjdjdjfhj

C/Project-pv in C/include/SDL.h

@@ -0,0 +1,232 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2021 Sam Lantinga <[email protected]>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ *  \file SDL.h
+ *
+ *  Main include header for the SDL library
+ */
+
+
+#ifndef SDL_h_
+#define SDL_h_
+
+#include "SDL_main.h"
+#include "SDL_stdinc.h"
+#include "SDL_assert.h"
+#include "SDL_atomic.h"
+#include "SDL_audio.h"
+#include "SDL_clipboard.h"
+#include "SDL_cpuinfo.h"
+#include "SDL_endian.h"
+#include "SDL_error.h"
+#include "SDL_events.h"
+#include "SDL_filesystem.h"
+#include "SDL_gamecontroller.h"
+#include "SDL_haptic.h"
+#include "SDL_hidapi.h"
+#include "SDL_hints.h"
+#include "SDL_joystick.h"
+#include "SDL_loadso.h"
+#include "SDL_log.h"
+#include "SDL_messagebox.h"
+#include "SDL_metal.h"
+#include "SDL_mutex.h"
+#include "SDL_power.h"
+#include "SDL_render.h"
+#include "SDL_rwops.h"
+#include "SDL_sensor.h"
+#include "SDL_shape.h"
+#include "SDL_system.h"
+#include "SDL_thread.h"
+#include "SDL_timer.h"
+#include "SDL_version.h"
+#include "SDL_video.h"
+#include "SDL_locale.h"
+#include "SDL_misc.h"
+
+#include "begin_code.h"
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* As of version 0.5, SDL is loaded dynamically into the application */
+
+/**
+ *  \name SDL_INIT_*
+ *
+ *  These are the flags which may be passed to SDL_Init().  You should
+ *  specify the subsystems which you will be using in your application.
+ */
+/* @{ */
+#define SDL_INIT_TIMER          0x00000001u
+#define SDL_INIT_AUDIO          0x00000010u
+#define SDL_INIT_VIDEO          0x00000020u  /**< SDL_INIT_VIDEO implies SDL_INIT_EVENTS */
+#define SDL_INIT_JOYSTICK       0x00000200u  /**< SDL_INIT_JOYSTICK implies SDL_INIT_EVENTS */
+#define SDL_INIT_HAPTIC         0x00001000u
+#define SDL_INIT_GAMECONTROLLER 0x00002000u  /**< SDL_INIT_GAMECONTROLLER implies SDL_INIT_JOYSTICK */
+#define SDL_INIT_EVENTS         0x00004000u
+#define SDL_INIT_SENSOR         0x00008000u
+#define SDL_INIT_NOPARACHUTE    0x00100000u  /**< compatibility; this flag is ignored. */
+#define SDL_INIT_EVERYTHING ( \
+                SDL_INIT_TIMER | SDL_INIT_AUDIO | SDL_INIT_VIDEO | SDL_INIT_EVENTS | \
+                SDL_INIT_JOYSTICK | SDL_INIT_HAPTIC | SDL_INIT_GAMECONTROLLER | SDL_INIT_SENSOR \
+            )
+/* @} */
+
+/**
+ * Initialize the SDL library.
+ *
+ * SDL_Init() simply forwards to calling SDL_InitSubSystem(). Therefore, the
+ * two may be used interchangeably. Though for readability of your code
+ * SDL_InitSubSystem() might be preferred.
+ *
+ * The file I/O (for example: SDL_RWFromFile) and threading (SDL_CreateThread)
+ * subsystems are initialized by default. Message boxes
+ * (SDL_ShowSimpleMessageBox) also attempt to work without initializing the
+ * video subsystem, in hopes of being useful in showing an error dialog when
+ * SDL_Init fails. You must specifically initialize other subsystems if you
+ * use them in your application.
+ *
+ * Logging (such as SDL_Log) works without initialization, too.
+ *
+ * `flags` may be any of the following OR'd together:
+ *
+ * - `SDL_INIT_TIMER`: timer subsystem
+ * - `SDL_INIT_AUDIO`: audio subsystem
+ * - `SDL_INIT_VIDEO`: video subsystem; automatically initializes the events
+ *   subsystem
+ * - `SDL_INIT_JOYSTICK`: joystick subsystem; automatically initializes the
+ *   events subsystem
+ * - `SDL_INIT_HAPTIC`: haptic (force feedback) subsystem
+ * - `SDL_INIT_GAMECONTROLLER`: controller subsystem; automatically
+ *   initializes the joystick subsystem
+ * - `SDL_INIT_EVENTS`: events subsystem
+ * - `SDL_INIT_EVERYTHING`: all of the above subsystems
+ * - `SDL_INIT_NOPARACHUTE`: compatibility; this flag is ignored
+ *
+ * Subsystem initialization is ref-counted, you must call SDL_QuitSubSystem()
+ * for each SDL_InitSubSystem() to correctly shutdown a subsystem manually (or
+ * call SDL_Quit() to force shutdown). If a subsystem is already loaded then
+ * this call will increase the ref-count and return.
+ *
+ * \param flags subsystem initialization flags
+ * \returns 0 on success or a negative error code on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_InitSubSystem
+ * \sa SDL_Quit
+ * \sa SDL_SetMainReady
+ * \sa SDL_WasInit
+ */
+extern DECLSPEC int SDLCALL SDL_Init(Uint32 flags);
+
+/**
+ * Compatibility function to initialize the SDL library.
+ *
+ * In SDL2, this function and SDL_Init() are interchangeable.
+ *
+ * \param flags any of the flags used by SDL_Init(); see SDL_Init for details.
+ * \returns 0 on success or a negative error code on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_Init
+ * \sa SDL_Quit
+ * \sa SDL_QuitSubSystem
+ */
+extern DECLSPEC int SDLCALL SDL_InitSubSystem(Uint32 flags);
+
+/**
+ * Shut down specific SDL subsystems.
+ *
+ * If you start a subsystem using a call to that subsystem's init function
+ * (for example SDL_VideoInit()) instead of SDL_Init() or SDL_InitSubSystem(),
+ * SDL_QuitSubSystem() and SDL_WasInit() will not work. You will need to use
+ * that subsystem's quit function (SDL_VideoQuit()) directly instead. But
+ * generally, you should not be using those functions directly anyhow; use
+ * SDL_Init() instead.
+ *
+ * You still need to call SDL_Quit() even if you close all open subsystems
+ * with SDL_QuitSubSystem().
+ *
+ * \param flags any of the flags used by SDL_Init(); see SDL_Init for details.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_InitSubSystem
+ * \sa SDL_Quit
+ */
+extern DECLSPEC void SDLCALL SDL_QuitSubSystem(Uint32 flags);
+
+/**
+ * Get a mask of the specified subsystems which are currently initialized.
+ *
+ * \param flags any of the flags used by SDL_Init(); see SDL_Init for details.
+ * \returns a mask of all initialized subsystems if `flags` is 0, otherwise it
+ *          returns the initialization status of the specified subsystems.
+ *
+ *          The return value does not include SDL_INIT_NOPARACHUTE.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_Init
+ * \sa SDL_InitSubSystem
+ */
+extern DECLSPEC Uint32 SDLCALL SDL_WasInit(Uint32 flags);
+
+/**
+ * Clean up all initialized subsystems.
+ *
+ * You should call this function even if you have already shutdown each
+ * initialized subsystem with SDL_QuitSubSystem(). It is safe to call this
+ * function even in the case of errors in initialization.
+ *
+ * If you start a subsystem using a call to that subsystem's init function
+ * (for example SDL_VideoInit()) instead of SDL_Init() or SDL_InitSubSystem(),
+ * then you must use that subsystem's quit function (SDL_VideoQuit()) to shut
+ * it down before calling SDL_Quit(). But generally, you should not be using
+ * those functions directly anyhow; use SDL_Init() instead.
+ *
+ * You can use this function with atexit() to ensure that it is run when your
+ * application is shutdown, but it is not wise to do this from a library or
+ * other dynamically loaded code.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_Init
+ * \sa SDL_QuitSubSystem
+ */
+extern DECLSPEC void SDLCALL SDL_Quit(void);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* SDL_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */