Upgrade Go to 1.24 #125
Upgrade Go to 1.24 #125
Conversation
WalkthroughThis pull request updates various configuration and build files across multiple Go project directories. The changes raise the minimum Go version from earlier versions (1.16/1.22) to 1.24, correct module path typos in go.mod files, and modify Dockerfiles to improve dependency management and caching. Adjustments are applied consistently across starter, solution, and template directories. Changes
Sequence Diagram(s)sequenceDiagram
participant Dev as Developer
participant DD as Docker Daemon
participant FS as File System
participant GMF as Go Module Fetcher
Dev->>DD: Initiate Docker build
DD->>FS: Check CODECRAFTERS_DEPENDENCY_FILE_PATHS (go.mod, go.sum)
FS-->>DD: Return file status
DD->>FS: Copy project files (exclude .git, README.md)
DD->>DD: Set environment variables (e.g., GODEBUG) and working directory
DD->>GMF: Execute "go mod download" and install std lib
GMF-->>DD: Modules downloaded
DD-->>Dev: Build complete
Poem
Warning There were issues while running some tools. Please review the errors and either fix the tool’s configuration or disable the tool if it’s a critical failure. 🔧 golangci-lint (1.62.2)Error: can't load config: the Go language version (go1.23) used to build golangci-lint is lower than the targeted Go version (1.24.0) 🪧 TipsChatThere are 3 ways to chat with CodeRabbit:
Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments. CodeRabbit Commands (Invoked using PR comments)
Other keywords and placeholders
CodeRabbit Configuration File (
|
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 2
🧹 Nitpick comments (2)
dockerfiles/go-1.24.Dockerfile (1)
12-14: Typographical Correction in CommentThere is a typo in the comment on line 12:
“Starting from Go 1.20, the go standard library is no loger compiled.”
Consider correcting “no loger” to “no longer” for clarity.dockerfiles/go-1.22.Dockerfile (1)
12-14: Typographical Note in CommentSimilar to the new Dockerfile, correct the typo in line 12's comment by replacing “no loger compiled” with “no longer compiled” for clarity.
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (10)
compiled_starters/go/README.md(1 hunks)compiled_starters/go/codecrafters.yml(1 hunks)compiled_starters/go/go.mod(1 hunks)dockerfiles/go-1.22.Dockerfile(1 hunks)dockerfiles/go-1.24.Dockerfile(1 hunks)solutions/go/01-dr6/code/README.md(1 hunks)solutions/go/01-dr6/code/codecrafters.yml(1 hunks)solutions/go/01-dr6/code/go.mod(1 hunks)starter_templates/go/code/go.mod(1 hunks)starter_templates/go/config.yml(1 hunks)
✅ Files skipped from review due to trivial changes (3)
- compiled_starters/go/codecrafters.yml
- compiled_starters/go/go.mod
- solutions/go/01-dr6/code/codecrafters.yml
🧰 Additional context used
🪛 Hadolint (2.12.0)
dockerfiles/go-1.24.Dockerfile
[error] 10-10: invalid flag: --exclude
(DL1000)
dockerfiles/go-1.22.Dockerfile
[error] 10-10: invalid flag: --exclude
(DL1000)
⏰ Context from checks skipped due to timeout of 90000ms (13)
- GitHub Check: test_course_definition / test (zig)
- GitHub Check: test_course_definition / test (typescript)
- GitHub Check: test_course_definition / test (swift)
- GitHub Check: test_course_definition / test (rust)
- GitHub Check: test_course_definition / test (ruby)
- GitHub Check: test_course_definition / test (python)
- GitHub Check: test_course_definition / test (kotlin)
- GitHub Check: test_course_definition / test (java)
- GitHub Check: test_course_definition / test (go)
- GitHub Check: test_course_definition / test (gleam)
- GitHub Check: test_course_definition / test (csharp)
- GitHub Check: test_course_definition / test (cpp)
- GitHub Check: test_course_definition / test (c)
🔇 Additional comments (12)
solutions/go/01-dr6/code/README.md (1)
32-36: Updated Go Version Requirement in Instructions
The added step now clearly states that Go 1.24 is required, which aligns with the PR objective and ensures consistency with other documentation files.compiled_starters/go/README.md (1)
32-37: Consistent Go Version Update
The change updating the installation requirement togo (1.24)is clear and consistent with other parts of the repository. This helps avoid any confusion regarding the required Go version.starter_templates/go/config.yml (1)
1-4: Updated Configuration for Go Executable
Therequired_executableattribute has been updated togo (1.24), which is correct and consistent with the changes across the project. This ensures that template parameters reflect the new minimum Go version requirement.starter_templates/go/code/go.mod (1)
9-12: Corrected Module Path and Upgraded Go Version
The module path correction fromgithub/com/codecrafters-io/sqlite-starter-gotogithub.com/codecrafters-io/sqlite-starter-goand the Go version upgrade togo 1.24.0are both essential for proper module resolution and compatibility with Go 1.24.solutions/go/01-dr6/code/go.mod (1)
9-12: Module Path and Go Version Update Confirmed
The updated module path and Go version (go 1.24.0) ensure that this module is correctly defined and compatible with the new Go version. This update is consistent with the changes in other parts of the project.dockerfiles/go-1.24.Dockerfile (3)
1-2: Base Image Upgrade ConfirmationThe base image is updated to
golang:1.24-alpinewhich is fully aligned with the PR objective to upgrade to Go 1.24.
4-5: Dependency Tracking Environment VariableThe introduction of the environment variable
CODECRAFTERS_DEPENDENCY_FILE_PATHS="go.mod,go.sum"ensures that changes in critical dependency files trigger a rebuild. This is a good approach for optimized caching.
16-17: Go Module Download CommandThe
RUN go mod downloadcommand is straightforward and correctly placed.dockerfiles/go-1.22.Dockerfile (4)
1-3: Base Image Version Inconsistency CheckThis Dockerfile still uses
golang:1.22-alpineas its base image. Since the PR’s objective is to upgrade to Go 1.24, please verify whether this file is maintained for legacy purposes or if it should also be upgraded to 1.24 for consistency.
4-5: Dependency Tracking Environment VariableThe addition of the environment variable
CODECRAFTERS_DEPENDENCY_FILE_PATHS="go.mod,go.sum"is a good practice to force rebuilds when dependency files change.
14-16: Standard Library Installation CommandThe command
RUN GODEBUG="installgoroot=all" go install stdretains the previous behavior of compiling the Go standard library, which may be necessary for some legacy setups. Confirm that this behavior is still desired with Go 1.24.
16-17: Go Module Download CommandThe final
RUN go mod downloadcommand is correctly placed and functions as expected.
| # .git & README.md are unique per-repository. We ignore them on first copy to prevent cache misses | ||
| COPY --exclude=.git --exclude=README.md . /app |
There was a problem hiding this comment.
🛠️ Refactor suggestion
Invalid COPY Flag Usage
The COPY command uses --exclude flags (i.e.
COPY --exclude=.git --exclude=README.md . /app
```) which is not a valid flag in Docker’s COPY command. Docker ignores such flags and external tools (like Hadolint) flag this as an error.
**Suggested Resolution:**
• Remove the `--exclude` flags from the COPY command and instead use a properly configured `.dockerignore` file to exclude `.git` and `README.md`.
For example, update the Dockerfile diff as follows:
```diff
-COPY --exclude=.git --exclude=README.md . /app
+COPY . /app
Then add a .dockerignore file at the repository root (if not already present) with the following entries:
.git
README.md🧰 Tools
🪛 Hadolint (2.12.0)
[error] 10-10: invalid flag: --exclude
(DL1000)
| # .git & README.md are unique per-repository. We ignore them on first copy to prevent cache misses | ||
| COPY --exclude=.git --exclude=README.md . /app |
There was a problem hiding this comment.
🛠️ Refactor suggestion
Invalid COPY Flag Usage
As with the new Dockerfile, the COPY command here uses unsupported --exclude flags:
COPY --exclude=.git --exclude=README.md . /app
Recommended Action:
• Remove the unsupported flags and manage file exclusions via a .dockerignore file.
Apply this diff:
-COPY --exclude=.git --exclude=README.md . /app
+COPY . /appEnsure that .git and README.md are listed in .dockerignore to prevent cache misses.
📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| # .git & README.md are unique per-repository. We ignore them on first copy to prevent cache misses | |
| COPY --exclude=.git --exclude=README.md . /app | |
| # .git & README.md are unique per-repository. We ignore them on first copy to prevent cache misses | |
| COPY . /app |
🧰 Tools
🪛 Hadolint (2.12.0)
[error] 10-10: invalid flag: --exclude
(DL1000)
Summary by CodeRabbit
Documentation
Chores