The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/audit-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

warning: single-character string constant used as pattern --> examples/src/http/simple.rs:43:32 | 43 | if u.to_string().ends_with("a") { | ^^^ help: try using a `char` instead: `'a'` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#single_char_pattern = note: `#[warn(clippy::single_char_pattern)]` on by default

warning: accessing first element with `request .phones.get(0)` --> examples/src/http/simple.rs:29:23 | 29 | let first_phone = request | _______________________^ 30 | | .phones 31 | | .get(0) | |_______________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#get_first = note: `#[warn(clippy::get_first)]` on by default help: try | 29 ~ let first_phone = request 30 + .phones.first() |

warning: using `clone` on type `DefaultMakeTransport` which implements the `Copy` trait --> volo-grpc/src/transport/connect.rs:113:31 | 113 | let mk_conn = mk_conn.clone(); | ^^^^^^^^^^^^^^^ help: try dereferencing it: `*mk_conn` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#clone_on_copy = note: `#[warn(clippy::clone_on_copy)]` on by default

warning: use of `unwrap_or_else` to construct default value --> volo-grpc/src/status.rs:454:18 | 454 | .unwrap_or_else(Bytes::new); | ^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `unwrap_or_default()` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unwrap_or_default = note: `#[warn(clippy::unwrap_or_default)]` on by default

warning: you should consider adding a `Default` implementation for `MethodRouterBuilder<S>` --> volo-http/src/route.rs:303:5 | 303 | / pub fn new() -> Self { 304 | | Self { 305 | | router: MethodRouter::new(), 306 | | } 307 | | } | |_____^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#new_without_default help: try adding this | 299 + impl<S> Default for MethodRouterBuilder<S> 300 + where 301 + S: Clone + Send + Sync + 'static, 302 + { 303 + fn default() -> Self { 304 + Self::new() 305 + } 306 + } |

warning: you should consider adding a `Default` implementation for `MethodRouter<S>` --> volo-http/src/route.rs:156:5 | 156 | / pub fn new() -> Self { 157 | | Self { 158 | | options: MethodEndpoint::None, 159 | | get: MethodEndpoint::None, ... | 168 | | } 169 | | } | |_____^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#new_without_default help: try adding this | 152 + impl<S> Default for MethodRouter<S> 153 + where 154 + S: Clone + Send + Sync + 'static, 155 + { 156 + fn default() -> Self { 157 + Self::new() 158 + } 159 + } |

warning: you should consider adding a `Default` implementation for `Router<S>` --> volo-http/src/route.rs:44:5 | 44 | / pub fn new() -> Self { 45 | | Self { 46 | | matcher: Default::default(), 47 | | routes: Default::default(), 48 | | fallback: Fallback::from_status_code(StatusCode::NOT_FOUND), 49 | | } 50 | | } | |_____^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#new_without_default = note: `#[warn(clippy::new_without_default)]` on by default help: try adding this | 40 + impl<S> Default for Router<S> 41 + where 42 + S: Clone + Send + Sync + 'static, 43 + { 44 + fn default() -> Self { 45 + Self::new() 46 + } 47 + } |

warning: very complex type used. Consider factoring parts into `type` definitions --> volo-http/src/response.rs:18:16 | 18 | inner: StreamBody< | ________________^ 19 | | stream::Iter<Box<dyn Iterator<Item = Result<Frame<Bytes>, DynError>> + Send + Sync>>, 20 | | >, | |_________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#type_complexity

warning: this function can be simplified using the `async fn` syntax --> volo-http/src/request.rs:56:5 | 56 | / fn from( 57 | | cx: &HttpContext, 58 | | body: Incoming, 59 | | _state: &S, 60 | | ) -> impl Future<Output = Result<Self, Response<RespBody>>> + Send { | |______________________________________________________________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_async_fn = note: `#[warn(clippy::manual_async_fn)]` on by default help: make the function `async` and return the output of the future directly | 56 ~ async fn from( 57 + cx: &HttpContext, 58 + body: Incoming, 59 + _state: &S, 60 ~ ) -> Result<Self, Response<RespBody>> { | help: move the body of the async block to the enclosing function | 60 ~ ) -> impl Future<Output = Result<Self, Response<RespBody>>> + Send { 61 + if !json_content_type(&cx.headers) { 62 + return Err(Response::builder() 63 + .status(StatusCode::UNSUPPORTED_MEDIA_TYPE) 64 + .body(Bytes::new().into()) 65 + .unwrap()); 66 + } 67 + 68 + match body.collect().await { 69 + Ok(body) => { 70 + let body = body.to_bytes(); 71 + match serde_json::from_slice::<T>(body.as_ref()) { 72 + Ok(t) => Ok(Self(t)), 73 + Err(e) => { 74 + tracing::warn!("json serialization error {e}"); 75 + Err(Response::builder() 76 + .status(StatusCode::BAD_REQUEST) 77 + .body(Bytes::new().into()) 78 + .unwrap()) 79 + } 80 + } 81 + } 82 + Err(e) => { 83 + tracing::warn!("collect body error: {e}"); 84 + Err(Response::builder() 85 + .status(StatusCode::BAD_REQUEST) 86 + .body(Bytes::new().into()) 87 + .unwrap()) 88 + } 89 + } 90 + } |

warning: very complex type used. Consider factoring parts into `type` definitions --> volo-http/src/layer.rs:18:10 | 18 | ) -> FilterLayer<Box<dyn Fn(&mut HttpContext, &Request<Incoming>) -> Result<(), StatusCode>>> | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#type_complexity = note: `#[warn(clippy::type_complexity)]` on by default

warning: try not to call a closure in the expression where it is declared --> volo-thrift/src/codec/default/mod.rs:136:28 | 136 | let write_result = (|| async { | ____________________________^ 137 | | self.linked_bytes.reset(); 138 | | // then we reserve the size of the message in the linked bytes 139 | | self.linked_bytes.reserve(malloc_size); ... | 158 | | Ok::<(), crate::Error>(()) 159 | | })() | |____________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_closure_call = note: `#[warn(clippy::redundant_closure_call)]` on by default help: try doing something like | 136 ~ let write_result = async async { 137 + self.linked_bytes.reset(); 138 + // then we reserve the size of the message in the linked bytes 139 + self.linked_bytes.reserve(malloc_size); 140 + // after that, we encode the message into the linked bytes 141 + self.encoder 142 + .encode(cx, &mut self.linked_bytes, msg) 143 + .map_err(|e| { 144 + // record the error time 145 + cx.stats_mut().record_encode_end_at(); 146 + e 147 + })?; 148 + 149 + cx.stats_mut().record_encode_end_at(); 150 + cx.stats_mut().record_write_start_at(); // encode end is also write start 151 + 152 + self.linked_bytes 153 + .write_all_vectored(&mut self.writer) 154 + .await 155 + .map_err(TransportError::from)?; 156 + self.writer.flush().await.map_err(TransportError::from)?; 157 + 158 + Ok::<(), crate::Error>(()) 159 + } |

warning: unneeded `return` statement --> volo-thrift/src/codec/default/ttheader.rs:136:13 | 136 | return self.inner.decode_async(cx, reader).await; | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 136 - return self.inner.decode_async(cx, reader).await; 136 + self.inner.decode_async(cx, reader).await |

warning: unneeded `return` statement --> volo-thrift/src/codec/default/framed.rs:140:13 | 140 | return self.inner.decode_async(cx, reader).await; | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return = note: `#[warn(clippy::needless_return)]` on by default help: remove `return` | 140 - return self.inner.decode_async(cx, reader).await; 140 + self.inner.decode_async(cx, reader).await |

warning: using `Option.and_then(|x| Some(y))`, which is more succinctly expressed as `map(|x| y)` --> volo-thrift/src/client/mod.rs:607:13 | 607 | / cache 608 | | .pop() 609 | | .and_then(|mut cx| { 610 | | // The generated code only push the cx to the cache, we need to reset ... | 639 | | Some(cx) 640 | | }) | |__________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#bind_instead_of_map = note: `#[warn(clippy::bind_instead_of_map)]` on by default help: try | 609 ~ .map(|mut cx| { 610 | // The generated code only push the cx to the cache, we need to reset ... 638 | cx.rpc_info_mut().method = Some(FastStr::from_static_str(method)); 639 ~ cx |

warning: use of `or_insert_with` to construct default value --> volo-thrift/src/transport/pool/mod.rs:540:45 | 540 | let idle = self.idle.entry(key).or_insert_with(Vec::new); | ^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `or_default()` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unwrap_or_default = note: `#[warn(clippy::unwrap_or_default)]` on by default

warning: this function has too many arguments (8/7) --> volo-thrift/src/transport/pingpong/server.rs:21:1 | 21 | / pub async fn serve<Svc, Req, Resp, E, D, SP>( 22 | | mut encoder: E, 23 | | mut decoder: D, 24 | | notified: Notified<'_>, ... | 36 | | D: Decoder, 37 | | SP: SpanProvider, | |_____________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_many_arguments = note: `#[warn(clippy::too_many_arguments)]` on by default

warning: use of a fallible conversion when an infallible one could be used --> volo-thrift/src/error.rs:302:61 | 302 | let remote_kind: ApplicationErrorKind = TryFrom::try_from(remote_type_as_int) | ^^^^^^^^^^^^^^^^^ help: use: `From::from` | = note: converting `i32` to `ApplicationErrorKind` cannot fail = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_fallible_conversions

warning: use of a fallible conversion when an infallible one could be used --> volo-thrift/src/error.rs:261:61 | 261 | let remote_kind: ApplicationErrorKind = TryFrom::try_from(remote_type_as_int) | ^^^^^^^^^^^^^^^^^ help: use: `From::from` | = note: converting `i32` to `ApplicationErrorKind` cannot fail = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_fallible_conversions = note: `#[warn(clippy::unnecessary_fallible_conversions)]` on by default

warning: unused imports: `TFieldIdentifier`, `TListIdentifier`, `TMapIdentifier`, `TSetIdentifier`, `TStructIdentifier`, `TType` --> volo-thrift/src/protocol/mod.rs:3:13 | 3 | binary, TFieldIdentifier, TInputProtocol, TLengthProtocol, TListIdentifier, TMapIdentifier, | ^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^ 4 | TMessageIdentifier, TMessageType, TOutputProtocol, TSetIdentifier, TStructIdentifier, TType, | ^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^ ^^^^^

warning: unused import: `binary::TBinaryProtocol` --> volo-thrift/src/protocol/mod.rs:1:9 | 1 | pub use binary::TBinaryProtocol; | ^^^^^^^^^^^^^^^^^^^^^^^ | = note: `#[warn(unused_imports)]` on by default

warning: this function can be simplified using the `async fn` syntax --> volo/src/client.rs:49:5 | 49 | / fn call<'cx>( 50 | | self, 51 | | cx: &'cx mut Cx, 52 | | req: Req, 53 | | ) -> impl Future<Output = Result<Self::Response, Self::Error>> + Send { | |_________________________________________________________________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_async_fn = note: `#[warn(clippy::manual_async_fn)]` on by default help: make the function `async` and return the output of the future directly | 49 ~ async fn call<'cx>( 50 + self, 51 + cx: &'cx mut Cx, 52 + req: Req, 53 ~ ) -> Result<Self::Response, Self::Error> { | help: move the body of the async block to the enclosing function | 53 ~ ) -> impl Future<Output = Result<Self::Response, Self::Error>> + Send { 54 + self.opt.apply(cx)?; 55 + self.inner.call(cx, req).await 56 + } |

warning: the following explicit lifetimes could be elided: 'cx --> volo/src/client.rs:49:13 | 49 | fn call<'cx>( | ^^^ 50 | self, 51 | cx: &'cx mut Cx, | ^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_lifetimes help: elide the lifetimes | 49 ~ fn call'_>( 50 | self, 51 ~ cx: &mut Cx, |

warning: the following explicit lifetimes could be elided: 'cx --> volo/src/client.rs:30:13 | 30 | fn call<'cx>( | ^^^ 31 | self, 32 | cx: &'cx mut Cx, | ^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_lifetimes = note: `#[warn(clippy::needless_lifetimes)]` on by default help: elide the lifetimes | 30 ~ fn call'_>( 31 | self, 32 ~ cx: &mut Cx, |

warning: unneeded `return` statement --> volo/src/hotrestart/mod.rs:415:17 | 415 | return Err(e); | ^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 415 - return Err(e); 415 + Err(e) |

warning: unneeded `return` statement --> volo/src/hotrestart/mod.rs:409:17 | 409 | / return Err(io::Error::new( 410 | | io::ErrorKind::InvalidData, 411 | | "Not PassFdResponse", 412 | | )); | |__________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 409 ~ Err(io::Error::new( 410 + io::ErrorKind::InvalidData, 411 + "Not PassFdResponse", 412 ~ )) |

warning: unneeded `return` statement --> volo/src/hotrestart/mod.rs:406:17 | 406 | return Ok(Some(fd)); | ^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 406 - return Ok(Some(fd)); 406 + Ok(Some(fd)) |

warning: useless conversion to the same type: `std::io::Error` --> volo/src/hotrestart/mod.rs:279:28 | 279 | return Err(e.into()); | ^^^^^^^^ help: consider removing `.into()`: `e` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_conversion = note: `#[warn(clippy::useless_conversion)]` on by default

warning: unneeded `return` statement --> volo/src/hotrestart/mod.rs:279:17 | 279 | return Err(e.into()); | ^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 279 - return Err(e.into()); 279 + Err(e.into()) |

warning: unneeded `return` statement --> volo/src/hotrestart/mod.rs:274:25 | 274 | return Err(io::Error::new(io::ErrorKind::InvalidData, e.message)); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 274 - return Err(io::Error::new(io::ErrorKind::InvalidData, e.message)); 274 + Err(io::Error::new(io::ErrorKind::InvalidData, e.message)) |

warning: unneeded `return` statement --> volo/src/hotrestart/mod.rs:270:29 | 270 | ... return Ok(HotRestartMessage::TerminateParentRequest); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 270 - return Ok(HotRestartMessage::TerminateParentRequest); 270 + Ok(HotRestartMessage::TerminateParentRequest) |

warning: unneeded `return` statement --> volo/src/hotrestart/mod.rs:263:33 | 263 | / ... return Err(io::Error::new( 264 | | ... io::ErrorKind::InvalidData, 265 | | ... "PassFdResponse without fd", 266 | | ... )); | |________________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 263 ~ Err(io::Error::new( 264 + io::ErrorKind::InvalidData, 265 + "PassFdResponse without fd", 266 ~ )) |

warning: unneeded `return` statement --> volo/src/hotrestart/mod.rs:261:33 | 261 | ... return Ok(HotRestartMessage::PassFdResponse(fd)); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 261 - return Ok(HotRestartMessage::PassFdResponse(fd)); 261 + Ok(HotRestartMessage::PassFdResponse(fd)) |

warning: unneeded `return` statement --> volo/src/hotrestart/mod.rs:250:29 | 250 | ... return Ok(HotRestartMessage::PassFdRequest(addr)); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return = note: `#[warn(clippy::needless_return)]` on by default help: remove `return` | 250 - return Ok(HotRestartMessage::PassFdRequest(addr)); 250 + Ok(HotRestartMessage::PassFdRequest(addr)) |

warning: you should consider adding a `Default` implementation for `HotRestart` --> volo/src/hotrestart/mod.rs:107:5 | 107 | / pub fn new() -> Self { 108 | | HotRestart { 109 | | state: Arc::new(Mutex::new(HotRestartState::Uninitalized)), 110 | | listener_fds: Arc::new(StdMutex::new(HashMap::new())), ... | 116 | | } 117 | | } | |_____^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#new_without_default = note: `#[warn(clippy::new_without_default)]` on by default help: try adding this | 106 + impl Default for HotRestart { 107 + fn default() -> Self { 108 + Self::new() 109 + } 110 + } |

warning: the borrowed expression implements the required traits --> volo/src/net/incoming.rs:298:34 | 298 | std::fs::remove_file(&path)?; | ^^^^^ help: change this to: `path` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrows_for_generic_args = note: `#[warn(clippy::needless_borrows_for_generic_args)]` on by default

warning: casting to the same type is unnecessary (`i32` -> `i32`) --> volo/src/net/incoming.rs:239:13 | 239 | libc::SOMAXCONN as i32 | ^^^^^^^^^^^^^^^^^^^^^^ help: try: `libc::SOMAXCONN` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast

warning: casting to the same type is unnecessary (`i32` -> `i32`) --> volo/src/net/incoming.rs:229:20 | 229 | return libc::SOMAXCONN as i32; | ^^^^^^^^^^^^^^^^^^^^^^ help: try: `libc::SOMAXCONN` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast

warning: casting to the same type is unnecessary (`i32` -> `i32`) --> volo/src/net/incoming.rs:222:30 | 222 | Err(_) => return libc::SOMAXCONN as i32, | ^^^^^^^^^^^^^^^^^^^^^^ help: try: `libc::SOMAXCONN` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast = note: `#[warn(clippy::unnecessary_cast)]` on by default

warning: manual `RangeInclusive::contains` implementation --> volo/src/net/incoming.rs:156:16 | 156 | if b'0' <= c && c <= b'9' { | ^^^^^^^^^^^^^^^^^^^^^^ help: use: `(b'0'..=b'9').contains(&c)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_range_contains = note: `#[warn(clippy::manual_range_contains)]` on by default

warning: constants have by default a `'static` lifetime --> volo/src/hotrestart/mod.rs:33:32 | 33 | const HOT_RESTART_CHILD_ADDR: &'static str = "volo_hot_restart_child.sock"; | -^^^^^^^---- help: consider removing `'static`: `&str` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_static_lifetimes

warning: constants have by default a `'static` lifetime --> volo/src/hotrestart/mod.rs:32:33 | 32 | const HOT_RESTART_PARENT_ADDR: &'static str = "volo_hot_restart_parent.sock"; | -^^^^^^^---- help: consider removing `'static`: `&str` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_static_lifetimes = note: `#[warn(clippy::redundant_static_lifetimes)]` on by default

warning: this function can be simplified using the `async fn` syntax --> volo/src/client.rs:49:5 | 49 | / fn call<'cx>( 50 | | self, 51 | | cx: &'cx mut Cx, 52 | | req: Req, 53 | | ) -> impl Future<Output = Result<Self::Response, Self::Error>> + Send { | |_________________________________________________________________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_async_fn = note: `#[warn(clippy::manual_async_fn)]` on by default help: make the function `async` and return the output of the future directly | 49 ~ async fn call<'cx>( 50 + self, 51 + cx: &'cx mut Cx, 52 + req: Req, 53 ~ ) -> Result<Self::Response, Self::Error> { | help: move the body of the async block to the enclosing function | 53 ~ ) -> impl Future<Output = Result<Self::Response, Self::Error>> + Send { 54 + self.opt.apply(cx)?; 55 + self.inner.call(cx, req).await 56 + } |

warning: the following explicit lifetimes could be elided: 'cx --> volo/src/client.rs:49:13 | 49 | fn call<'cx>( | ^^^ 50 | self, 51 | cx: &'cx mut Cx, | ^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_lifetimes help: elide the lifetimes | 49 ~ fn call'_>( 50 | self, 51 ~ cx: &mut Cx, |

warning: the following explicit lifetimes could be elided: 'cx --> volo/src/client.rs:30:13 | 30 | fn call<'cx>( | ^^^ 31 | self, 32 | cx: &'cx mut Cx, | ^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_lifetimes = note: `#[warn(clippy::needless_lifetimes)]` on by default help: elide the lifetimes | 30 ~ fn call'_>( 31 | self, 32 ~ cx: &mut Cx, |

warning: unneeded `return` statement --> volo/src/hotrestart/mod.rs:415:17 | 415 | return Err(e); | ^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 415 - return Err(e); 415 + Err(e) |

warning: unneeded `return` statement --> volo/src/hotrestart/mod.rs:409:17 | 409 | / return Err(io::Error::new( 410 | | io::ErrorKind::InvalidData, 411 | | "Not PassFdResponse", 412 | | )); | |__________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 409 ~ Err(io::Error::new( 410 + io::ErrorKind::InvalidData, 411 + "Not PassFdResponse", 412 ~ )) |

warning: unneeded `return` statement --> volo/src/hotrestart/mod.rs:406:17 | 406 | return Ok(Some(fd)); | ^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 406 - return Ok(Some(fd)); 406 + Ok(Some(fd)) |

warning: useless conversion to the same type: `std::io::Error` --> volo/src/hotrestart/mod.rs:279:28 | 279 | return Err(e.into()); | ^^^^^^^^ help: consider removing `.into()`: `e` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_conversion = note: `#[warn(clippy::useless_conversion)]` on by default

warning: unneeded `return` statement --> volo/src/hotrestart/mod.rs:279:17 | 279 | return Err(e.into()); | ^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 279 - return Err(e.into()); 279 + Err(e.into()) |

warning: unneeded `return` statement --> volo/src/hotrestart/mod.rs:274:25 | 274 | return Err(io::Error::new(io::ErrorKind::InvalidData, e.message)); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 274 - return Err(io::Error::new(io::ErrorKind::InvalidData, e.message)); 274 + Err(io::Error::new(io::ErrorKind::InvalidData, e.message)) |

warning: unneeded `return` statement --> volo/src/hotrestart/mod.rs:270:29 | 270 | ... return Ok(HotRestartMessage::TerminateParentRequest); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 270 - return Ok(HotRestartMessage::TerminateParentRequest); 270 + Ok(HotRestartMessage::TerminateParentRequest) |

warning: unneeded `return` statement --> volo/src/hotrestart/mod.rs:263:33 | 263 | / ... return Err(io::Error::new( 264 | | ... io::ErrorKind::InvalidData, 265 | | ... "PassFdResponse without fd", 266 | | ... )); | |________________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 263 ~ Err(io::Error::new( 264 + io::ErrorKind::InvalidData, 265 + "PassFdResponse without fd", 266 ~ )) |

warning: unneeded `return` statement --> volo/src/hotrestart/mod.rs:261:33 | 261 | ... return Ok(HotRestartMessage::PassFdResponse(fd)); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 261 - return Ok(HotRestartMessage::PassFdResponse(fd)); 261 + Ok(HotRestartMessage::PassFdResponse(fd)) |

warning: unneeded `return` statement --> volo/src/hotrestart/mod.rs:250:29 | 250 | ... return Ok(HotRestartMessage::PassFdRequest(addr)); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return = note: `#[warn(clippy::needless_return)]` on by default help: remove `return` | 250 - return Ok(HotRestartMessage::PassFdRequest(addr)); 250 + Ok(HotRestartMessage::PassFdRequest(addr)) |

warning: you should consider adding a `Default` implementation for `HotRestart` --> volo/src/hotrestart/mod.rs:107:5 | 107 | / pub fn new() -> Self { 108 | | HotRestart { 109 | | state: Arc::new(Mutex::new(HotRestartState::Uninitalized)), 110 | | listener_fds: Arc::new(StdMutex::new(HashMap::new())), ... | 116 | | } 117 | | } | |_____^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#new_without_default = note: `#[warn(clippy::new_without_default)]` on by default help: try adding this | 106 + impl Default for HotRestart { 107 + fn default() -> Self { 108 + Self::new() 109 + } 110 + } |

warning: the borrowed expression implements the required traits --> volo/src/net/incoming.rs:298:34 | 298 | std::fs::remove_file(&path)?; | ^^^^^ help: change this to: `path` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrows_for_generic_args = note: `#[warn(clippy::needless_borrows_for_generic_args)]` on by default

warning: casting to the same type is unnecessary (`i32` -> `i32`) --> volo/src/net/incoming.rs:239:13 | 239 | libc::SOMAXCONN as i32 | ^^^^^^^^^^^^^^^^^^^^^^ help: try: `libc::SOMAXCONN` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast

warning: casting to the same type is unnecessary (`i32` -> `i32`) --> volo/src/net/incoming.rs:229:20 | 229 | return libc::SOMAXCONN as i32; | ^^^^^^^^^^^^^^^^^^^^^^ help: try: `libc::SOMAXCONN` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast

warning: casting to the same type is unnecessary (`i32` -> `i32`) --> volo/src/net/incoming.rs:222:30 | 222 | Err(_) => return libc::SOMAXCONN as i32, | ^^^^^^^^^^^^^^^^^^^^^^ help: try: `libc::SOMAXCONN` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast = note: `#[warn(clippy::unnecessary_cast)]` on by default

warning: manual `RangeInclusive::contains` implementation --> volo/src/net/incoming.rs:156:16 | 156 | if b'0' <= c && c <= b'9' { | ^^^^^^^^^^^^^^^^^^^^^^ help: use: `(b'0'..=b'9').contains(&c)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_range_contains = note: `#[warn(clippy::manual_range_contains)]` on by default

warning: constants have by default a `'static` lifetime --> volo/src/hotrestart/mod.rs:33:32 | 33 | const HOT_RESTART_CHILD_ADDR: &'static str = "volo_hot_restart_child.sock"; | -^^^^^^^---- help: consider removing `'static`: `&str` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_static_lifetimes