Fusion3 F400-S Modifications/Build Log
This Repo is to document and assist with modifications to my Fusion3 F400-S, what I am calling a F400-M. The current plan is to upgrade from the stock Duet board to a BTT Octopus Max EZ with the EZ2209 Drivers and use the belt conversion from TFD42 on thingiverse. The printer will also be run using Klipper.
| Part | Qty | Link |
|---|---|---|
| BTT Octopus Max EZ + EZ2209 | 1 | https://biqu.equipment/products/bigtreetech-btt-octopusmax-ez-for-3d-printer?variant=40214298460258 |
| BTT EZ 2209 Driver | 4 MIN | https://biqu.equipment/collections/driver-board/products/ez-drive-easy-driver-ez2209-ez5160-pro-v1-0 |
| Crossover Bracket | 1 | CAD |
| Spacers | 4 | CAD |
| GT2 20 Toothless Idler Pulley | 10 | https://a.co/d/1YfOC2A |
| GT2 30 Tooth Timing Pulley | 2 | https://a.co/d/5ijzSex |
| GT2 Timing Belt 6mm Width | 5M | https://a.co/d/81Pha8t |
| Modified HextrudORT Extruder | 1 | https://github.com/MirageC79/HextrudORT (Modified Files are in CAD) |
| X-Axis Carriage | 2 | CAD |
| X-Axis MGN12 Rail w/ MGN12H Block | 450mm | https://tinyurl.com/bdhh9vt2 |
| Y-Axis MGN12 Rail w/ MGN12H Block | (2) 500mm | https://tinyurl.com/bdhh9vt2 |
| Hardware in BOM | See BOM |