This project is a simulation on IoT remote control for SmartHouse. Implemented MQTT to broadcast the bit state to the hardware. Future planning to include physical hardware.
| Hardware ID | Broadcom Pin | Bit7 | Bit6 | Bit5 | Bit4 | Bit3 | Bit2 | Bit1 | Bit0 |
|---|---|---|---|---|---|---|---|---|---|
| Fan ID1 | 4 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 |
| Fan ID2 | 17 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 |
| Fan ID3 | 18 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 |
| Fan ID4 | 21 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 |
| Lamp ID1 | 22 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 |
| Lamp ID2 | 23 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 |
| Lamp ID3 | 24 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 |
| Lamp ID4 | 25 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
 |
 |
 |
|---|
For physical IO simulation, PiSharp is being used. This is to simulate the output value via GPIO.
**Only for proof of concept