GBRL style commands for the Smart Device for active monitoring of Concrete
Home >> Smart Device for active monitoring fresh Concrete hardening at a construction site >> GBRL style commands
Communication with the smart device can be done using any open-source BLE terminal App. It utilizes Garble commands (GBRL) to do setup, configuration, and data measurements visualization in a text format.
GBRL command: $BLE
Setup ALWAYS ON
GBRL command: $BLE
Setup BLE Connectivity Interval
GBRL command: $BLE
GBRL command: $BLE
Setup Network SSID
GBRL command: $BLE
View current WIFI Network
GBRL command: $BLE
Setup WIFI Password
GBRL command: $BLE
View WIFI Password
GBRL command: $BLE
Synchronize Internet Time
GBRL command: $BLE
GBRL command: $BLE
GBRL command: $BLE
Maturity Model Selection
GBRL command: $BLE
view list of available sensors
GBRL command: $BLE
Motion Detection
enable GBRL command: $BLE
disable GBRL command: $BLE
view most recent acceleration value (X,Y,Z) GBRL command: $BLE
view most recent Tilt value (X,Y,Z) GBRL command: $BLE
view temperature value GBRL command: $BLE
Onboard AHT20/ SHT31 Temperature
enable GBRL command: $BLE
disable GBRL command: $BLE
view current Temperature GBRL command: $BLE
Onboard AHT20/ SHT31 Humidity
enable GBRL command: $BLE
disable GBRL command: $BLE
view current Humidity GBRL command: $BLE
Battery Level
GBRL command: $BLE
🟢 Fully tested and working
A green circle means the hardware electronics or the programming code was fully tested, each of its functionalities and capabilities. And it can be installed in a vehicle. Keep in mind this does not mean errors won't happen. As in everything related to electronics and software, there are revisions and updates. This open hardware is no different.
💯 Fully tested & working, no improvements necessary - already being sold online
🆓 Fully Open hardware \ source code
🤪 There's better than this. don't use it
🔐 Fully closed hardware \ source code
⚡️ fully tested and working, however, it is a dangerous solution to deploy
🟡 Not tested. Working capability is unknown, it may work or not.
A yellow circle means the hardware electronics or the programming code was not fully tested, each of its functionalities and capabilities. This does not mean it not working, it simply means testing is needed before giving a green circle of approval.
🔴 Fully tested but not working.
A red circle means the hardware electronics or the programming code was fully tested, and found some kind of critical error or fault. This means the electronics or firmware code cannot be used in a vehicle.
⌛ Not started.
The hourglass means the hardware electronics or the programming hasn't started. Most likely because is waiting for the necessary test components needed for reverse engineering and also engineering of the new open solution.
🆕 New updated contents
The new icon means the link next to it was recently updated with new contents
💬 Comments on the Discussion page
The comments icon means there are useful and even new comments on the discussions page of the repository important for what you are seeing or reading.
Be supportive of my dedication and work towards open hardware and buy me a cup of coffee. Links below. Above and on the side
  |
Don't forget to LIKE, SHARE and subscribe the free chat groups and if you downloaded one of AeonLabs's PCBs consider sponsor any open hardware project with a donation or a cup of coffee. Links on the top, right side pane, and below. |
|---|
 |
Subscribe to the WhatsApp or Telegram channel to get the latest information about any of these KiCad projects and get help. Or simply like this kind of project and want to stay updated with the latest research ideas and prototypes during the day and week.  
|
|---|
 |
One can find here useful utilities to use when designing and prototyping pcb electronics. For instance a simple Excel spreadsheet with a resistance divider finder compatible with all sold on aliexpress. Click on the Excel logo to the left to get them! |
|---|
 |
Subscribe to my Youtube channel for PCB assembly instruction or any other related to Artificial Intelligence, Smart devices and robotics. Link to the channel here. My most recent video is .... |
|---|
You can get in touch with me on my LinkedIn Profile:
Miguel Tomas :
You can also follow my GitHub Profile to stay updated about my latest projects:
The PCB design Files I provide here for anyone to use are free. If you like this Smart Device or use it, please consider buying me a cup of coffee, a slice of pizza, or a book to help me study, eat, and think new PCB design files.
Make a donation on PayPal and get a TAX refund*.
Did you like any of my PCB KiCad Designs? Help and Support my open work to all by becoming a GitHub sponsor.
Before proceeding to download any of AeonLab's open-source code for software solutions and/or open hardware electronics for smart devices and data acquisition make sure you are choosing the right license for your project. See AeonLabs Solutions for Open Hardware & Open Source Code for more information. For commercial business solutions contact AeonLabs ℹ️ using the contacts above. Thank you 🙏.