[Feat] Docker Compose 기반 환경별 CI/CD 구축 #39
Conversation
📝 Walkthrough워크스루 (Walkthrough)GitHub Actions 기반 CI(.github/workflows/ci.yml) 및 CD(.github/workflows/cd.yml) 워크플로우와 멀티아키 Docker 빌드/푸시, Docker Compose 배포 구성이 추가되고 기존 로컬 배포용 셸 스크립트들이 제거되었습니다. 변경사항 (Changes)
시퀀스 다이어그램 (Sequence Diagrams)sequenceDiagram
participant Dev as Developer
participant GH as GitHub Actions
participant Build as Self-hosted Runner (Build)
participant DockerHub as Docker Hub
participant DeploySrv as Deployment Server
Dev->>GH: Push / PR to develop/main
GH->>Build: Trigger CI job (checkout, JDK21, tests, bootJar)
Build->>Build: Setup QEMU & Buildx
Build->>DockerHub: Login & Buildx push multi-arch image
Build->>GH: Emit outputs (environment, repo_owner, image_tag)
GH->>DeploySrv: Trigger CD job with CI outputs
DeploySrv->>DeploySrv: Validate env & secrets
DeploySrv->>DeploySrv: Transfer docker-compose.yml / config
DeploySrv->>DockerHub: Docker login & pull image
DeploySrv->>DeploySrv: Start/Restart via docker-compose
DeploySrv->>GH: Report deployment status
sequenceDiagram
participant DockerCompose as Docker Compose
participant Container as App Container
participant Health as /actuator/health
DockerCompose->>Container: Start container with image & env
Container->>Container: Apply JVM options, run app.jar
DockerCompose->>Health: Poll management port /actuator/health
Health->>DockerCompose: Return 200 -> service healthy
추정 코드 리뷰 노력 (Estimated Code Review Effort)🎯 4 (Complex) | ⏱️ ~50 minutes
🚥 Pre-merge checks | ✅ 2 | ❌ 1❌ Failed checks (1 warning)
✅ Passed checks (2 passed)
✏️ Tip: You can configure your own custom pre-merge checks in the settings. ✨ Finishing touches
Comment |
Summary of ChangesHello @kyeoungwoon, I'm Gemini Code Assist1! I'm currently reviewing this pull request and will post my feedback shortly. In the meantime, here's a summary to help you and other reviewers quickly get up to speed! 이 PR은 Spring Boot 백엔드 애플리케이션을 위한 CI/CD 파이프라인의 핵심 구성 요소를 도입합니다. Docker를 사용하여 애플리케이션을 컨테이너화하고, 배포 스크립트를 통해 개발 환경에 자동으로 배포하는 과정을 자동화하여 개발 및 운영 효율성을 향상시키는 것을 목표로 합니다. Highlights
Ignored Files
Using Gemini Code AssistThe full guide for Gemini Code Assist can be found on our documentation page, here are some quick tips. Invoking Gemini You can request assistance from Gemini at any point by creating a comment using either
Customization To customize Gemini Code Assist for GitHub experience, repository maintainers can create a configuration file and/or provide a custom code review style guide (such as PEP-8 for Python) by creating and adding files to a Limitations & Feedback Gemini Code Assist may make mistakes. Please leave feedback on any instances where its feedback is incorrect or counter productive. You can react with 👍 and 👎 on @gemini-code-assist comments. If you're interested in giving your feedback about your experience with Gemini Code Assist for Github and other Google products, sign up here. You can also get AI-powered code generation, chat, as well as code reviews directly in the IDE at no cost with the Gemini Code Assist IDE Extension. Footnotes
|
![gemini-code-assist[bot]](https://avatars.githubusercontent.com/in/956858?s=60&v=4){kind=small}
There was a problem hiding this comment.
Code Review
이번 PR은 스프링 부트 애플리케이션의 CI/CD 파이프라인을 구축하기 위한 Dockerfile과 배포 스크립트를 추가하는군요. 전반적으로 좋은 시도이며, 특히 Dockerfile에서 non-root 유저를 사용하고 보안을 고려한 점이 인상적입니다. 배포 스크립트 또한 환경별 설정을 자동화하여 편리해 보입니다. 다만, 스크립트의 안정성을 높이고 Docker 컨테이너의 상태 관리를 개선하기 위한 몇 가지 제안 사항을 리뷰에 남겼습니다. 이 피드백들이 더 안정적인 CI/CD 환경을 구축하는 데 도움이 되기를 바랍니다.
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 11
🤖 Fix all issues with AI agents
In @.github/workflows/cd-dev.yml:
- Around line 25-28: The called workflow invocation "ci-and-build" uses "uses:
./.github/workflows/ci.yml" but omits "secrets: inherit", preventing downstream
access to secrets like DOCKERHUB_USERNAME/DOCKERHUB_TOKEN/DOCKER_IMAGE_NAME;
update the "ci-and-build" job block to include "secrets: inherit" alongside the
existing "with:" so the called workflow can access repository-level secrets when
running the CI build/push steps.
- Around line 7-11: The paths filter currently contains 'cd.yml' which doesn't
match this workflow file name; update the paths list entry that currently reads
'cd.yml' to the correct workflow path (for example
'.github/workflows/cd-dev.yml') or add that exact path alongside 'cd.yml' so
changes to this workflow file trigger the workflow; locate the 'paths:' block in
.github/workflows/cd-dev.yml and modify the 'cd.yml' item accordingly.
- Line 59: The workflow lists DOCKER_IMAGE_NAME in the envs matrix but it is not
defined in the env block, so add a definition for DOCKER_IMAGE_NAME in the job's
env (e.g., set DOCKER_IMAGE_NAME: ${{ secrets.DOCKER_IMAGE_NAME }} or a literal
image name) or remove DOCKER_IMAGE_NAME from the envs list; update the env block
where APPLICATION_PROD/APPLICATION_DEV/etc. are declared to include
DOCKER_IMAGE_NAME (or change the envs entry to reference the secret directly) so
the value is supplied at runtime.
In @.github/workflows/ci.yml:
- Around line 45-52: The CI currently applies matrix.platform across the entire
build-and-test job causing redundant compile/test runs; limit platform matrix to
only the Docker build/push or gate the test step to run once. Either split into
two jobs (e.g., a platform-independent build-and-test job without matrix and a
separate docker-build-and-push job using matrix.platform and tag-suffix) or keep
the matrix but add a conditional on the test step (the "Run Tests" step) such as
checking matrix.platform == 'linux/amd64' so tests/gradle compile run only for
one platform while the Docker build uses the full matrix.
- Around line 3-7: The YAMLlint warning comes from the bare key on: being
treated as a truthy value; update the workflow key from on: to a quoted key
"on": while preserving the nested structure (the pull_request block and branches
- develop and main) and indentation so the workflow still triggers correctly;
ensure no other keys are inadvertently quoted or modified.
- Around line 168-175: The Build Summary step in the create-manifest job is
referencing a step-local output (steps.set-env.outputs.environment and
.image_tag) that only exists in the build-and-test job, causing empty values;
fix this by exposing those values as job outputs from build-and-test (e.g., in
job build-and-test add outputs: environment: ${{
steps.set-env.outputs.environment }} and image_tag: ${{
steps.set-env.outputs.image_tag }}) and update the Build Summary echoes to use
the upstream job outputs via needs.build-and-test.outputs.environment and
needs.build-and-test.outputs.image_tag inside the create-manifest job.
In @docker/kyeoungwoon/dockerfile:
- Around line 39-40: Uncomment and enable the Docker HEALTHCHECK line so the
image exposes a container health probe: remove the leading '#' from the
HEALTHCHECK directive that targets the actuator endpoint (HEALTHCHECK
--interval=30s --timeout=5s CMD curl -f http://localhost:8080/actuator/health ||
exit 1), ensure the image contains curl (or switch CMD to a shell-safe health
check tool), and adjust interval/timeout values if needed for production
readiness.
In @scripts/cd-dev.sh:
- Around line 62-77: The script both omits quotes around variables like APP_DIR
(cd $APP_DIR) and misuses a trailing $? check that conflicts with using set -e;
fix by quoting variable expansions (e.g., cd "$APP_DIR", export
TAG="$IMAGE_TAG", export DOCKER_IMAGE_NAME="$DOCKER_IMAGE_NAME") and remove the
separate $? pattern—either enable robust failure handling with set -e at the top
and use command chaining (docker compose pull && docker compose up -d) or
replace the $? block with an inline conditional like if docker compose up -d;
then echo "✅ 컨테이너 재시작 성공"; else echo "❌ 컨테이너 재시작 실패"; exit 1; fi so failures are
detected reliably.
- Around line 52-59: The current `$?` check after `docker login` is ineffective
under `set -e`; replace the two-step pattern with a direct `if` wrapping the
login command: use `if echo "$DOCKERHUB_TOKEN" | docker login -u
"$DOCKERHUB_USERNAME" --password-stdin; then` ... `else` ... `fi` (or append `||
true` if you must preserve `set -e`), so that the script explicitly handles
success/failure of the `docker login` invocation instead of relying on `$?`.
- Around line 40-46: Wrap all uses of the APP_DIR variable in double quotes to
avoid word-splitting and glob expansion: update the mkdir invocation (mkdir -p
"$APP_DIR"/config), the echo redirections (echo "$APPLICATION_PROD" >
"$APP_DIR"/config/application-prod.yml, echo "$APPLICATION_DEV" >
"$APP_DIR"/config/application-dev.yml, echo "$APPLICATION_SECRET" >
"$APP_DIR"/config/application-secret.yml), and the chmod target (chmod 600
"$APP_DIR"/config/application-*.yml) so each reference to APP_DIR is quoted
while preserving the glob for application-*.yml.
- Around line 31-35: The branch that sets APP_DIR based on ENVIRONMENT doesn't
validate APP_DIR_PRODUCTION or APP_DIR_DEVELOPMENT, so APP_DIR can end up empty;
update the script to check that ENVIRONMENT is set and that the selected
variable (APP_DIR_PRODUCTION when ENVIRONMENT=="prod" or APP_DIR_DEVELOPMENT
otherwise) is non-empty before assigning to APP_DIR, and if missing print a
clear error including the missing variable name(s) and exit non‑zero; reference
the symbols ENVIRONMENT, APP_DIR_PRODUCTION, APP_DIR_DEVELOPMENT and APP_DIR
when adding these checks and the error/exit path.
📜 Review details
Configuration used: Path: .coderabbit.yaml
Review profile: ASSERTIVE
Plan: Pro
📒 Files selected for processing (4)
.github/workflows/cd-dev.yml.github/workflows/ci.ymldocker/kyeoungwoon/dockerfilescripts/cd-dev.sh
🧰 Additional context used
🪛 actionlint (1.7.10)
.github/workflows/cd-dev.yml
64-64: shellcheck reported issue in this script: SC2086:info:1:43: Double quote to prevent globbing and word splitting
(shellcheck)
64-64: shellcheck reported issue in this script: SC2086:info:2:12: Double quote to prevent globbing and word splitting
(shellcheck)
64-64: shellcheck reported issue in this script: SC2086:info:3:53: Double quote to prevent globbing and word splitting
(shellcheck)
64-64: shellcheck reported issue in this script: SC2086:info:4:48: Double quote to prevent globbing and word splitting
(shellcheck)
64-64: shellcheck reported issue in this script: SC2086:info:5:43: Double quote to prevent globbing and word splitting
(shellcheck)
64-64: shellcheck reported issue in this script: SC2086:info:6:87: Double quote to prevent globbing and word splitting
(shellcheck)
64-64: shellcheck reported issue in this script: SC2086:info:7:56: Double quote to prevent globbing and word splitting
(shellcheck)
64-64: shellcheck reported issue in this script: SC2086:info:8:43: Double quote to prevent globbing and word splitting
(shellcheck)
64-64: shellcheck reported issue in this script: SC2129:style:1:1: Consider using { cmd1; cmd2; } >> file instead of individual redirects
(shellcheck)
.github/workflows/ci.yml
60-60: shellcheck reported issue in this script: SC2086:info:19:38: Double quote to prevent globbing and word splitting
(shellcheck)
60-60: shellcheck reported issue in this script: SC2086:info:22:36: Double quote to prevent globbing and word splitting
(shellcheck)
60-60: shellcheck reported issue in this script: SC2086:info:26:34: Double quote to prevent globbing and word splitting
(shellcheck)
170-170: shellcheck reported issue in this script: SC2086:info:1:39: Double quote to prevent globbing and word splitting
(shellcheck)
170-170: shellcheck reported issue in this script: SC2086:info:2:12: Double quote to prevent globbing and word splitting
(shellcheck)
170-170: shellcheck reported issue in this script: SC2086:info:3:71: Double quote to prevent globbing and word splitting
(shellcheck)
170-170: shellcheck reported issue in this script: SC2086:info:4:67: Double quote to prevent globbing and word splitting
(shellcheck)
170-170: shellcheck reported issue in this script: SC2086:info:5:53: Double quote to prevent globbing and word splitting
(shellcheck)
170-170: shellcheck reported issue in this script: SC2129:style:1:1: Consider using { cmd1; cmd2; } >> file instead of individual redirects
(shellcheck)
170-170: property "set-env" is not defined in object type {}
(expression)
🪛 Checkov (3.2.334)
docker/kyeoungwoon/dockerfile
[low] 1-40: Ensure that HEALTHCHECK instructions have been added to container images
(CKV_DOCKER_2)
🪛 Shellcheck (0.11.0)
scripts/cd-dev.sh
[info] 40-40: Double quote to prevent globbing and word splitting.
(SC2086)
[info] 41-41: Double quote to prevent globbing and word splitting.
(SC2086)
[info] 42-42: Double quote to prevent globbing and word splitting.
(SC2086)
[info] 43-43: Double quote to prevent globbing and word splitting.
(SC2086)
[info] 46-46: Double quote to prevent globbing and word splitting.
(SC2086)
[style] 54-54: Check exit code directly with e.g. 'if mycmd;', not indirectly with $?.
(SC2181)
[info] 62-62: Double quote to prevent globbing and word splitting.
(SC2086)
[style] 72-72: Check exit code directly with e.g. 'if mycmd;', not indirectly with $?.
(SC2181)
🪛 YAMLlint (1.37.1)
.github/workflows/ci.yml
[warning] 3-3: truthy value should be one of [false, true]
(truthy)
[error] 47-47: too many spaces inside brackets
(brackets)
[error] 47-47: too many spaces inside brackets
(brackets)
[error] 140-140: too many spaces inside brackets
(brackets)
[error] 140-140: too many spaces inside brackets
(brackets)
🔇 Additional comments (7)
docker/kyeoungwoon/dockerfile (3)
10-21: 보안 모범 사례 적용 확인non-root 사용자(
spring) 생성, 파일 소유권 설정, 읽기 전용 권한(444) 적용 등 컨테이너 보안 모범 사례가 잘 적용되어 있습니다.
26-34: JVM 옵션 적절하게 구성됨컨테이너 환경에 적합한 JVM 옵션이 잘 설정되어 있습니다:
UseContainerSupport: 컨테이너 리소스 제한 인식MaxRAMPercentage=75.0: 적절한 메모리 할당ExitOnOutOfMemoryError: OOM 시 컨테이너 재시작 유도다만,
HeapDumpPath=/tmp는 OOM 발생 시 디스크 공간을 차지할 수 있으니, 볼륨 마운트된 경로나/app/logs로 변경하는 것도 고려해보세요.
14-14: 와일드카드 사용이 안전함 - 추가 조치 불필요Spring Boot 플러그인이 적용된 이 빌드 구성에서는 기본적으로 plain
jar태스크가 비활성화되어 있습니다. 따라서build/libs/*.jar와일드카드는bootJar에서 생성된 실행 가능한 JAR만 매칭하며, 예상치 못한 동작이 발생할 가능성은 없습니다.Likely an incorrect or invalid review comment.
.github/workflows/ci.yml (2)
40-43: 매트릭스 job에서 outputs 사용 시 비결정적 동작매트릭스 전략을 사용하는 job에서
outputs를 정의하면, 어떤 매트릭스 인스턴스의 출력값이 사용될지 보장되지 않습니다. 두 매트릭스 인스턴스가 동일한 출력을 설정하므로 현재는 문제가 없지만, 향후 유지보수 시 주의가 필요합니다.
25-28: 동시성 제어 적용 확인
concurrency설정으로 동일 브랜치/워크플로우의 이전 실행을 취소하여 리소스 낭비를 방지합니다..github/workflows/cd-dev.yml (2)
46-60: SSH를 통한 원격 스크립트 실행 구성 확인
appleboy/ssh-action을 사용한 SSH 접속 및 스크립트 실행 구성이 적절합니다. 시크릿과 환경 변수가envs파라미터를 통해 원격 서버로 전달됩니다.다만,
script_path로 지정된scripts/cd-dev.sh는 체크아웃된 로컬 파일이 아닌 원격 서버에 이미 존재하는 파일을 실행합니다. 스크립트를 원격 서버에 배포하는 별도 메커니즘이 있는지 확인하세요.
62-72: 배포 요약 출력 확인
if: always()조건으로 배포 성공/실패와 관계없이 요약이 출력됩니다.
There was a problem hiding this comment.
Pull request overview
이 PR은 프로젝트의 CI/CD 파이프라인을 구현합니다. GitHub Actions를 사용하여 코드 빌드, 테스트, Docker 이미지 생성 및 배포를 자동화합니다.
- CI workflow: PR 및 push 이벤트 시 코드 컴파일, 테스트 실행, multi-arch Docker 이미지 빌드 및 Docker Hub push
- CD workflow: develop 브랜치 push 시 자동 배포, SSH를 통한 원격 서버 배포
- 배포 스크립트와 Dockerfile 추가로 컨테이너 기반 배포 환경 구축
Reviewed changes
Copilot reviewed 4 out of 4 changed files in this pull request and generated 15 comments.
| File | Description |
|---|---|
| .github/workflows/ci.yml | PR과 push 이벤트에 대한 CI 파이프라인 정의 - 빌드, 테스트, multi-arch Docker 이미지 생성 |
| .github/workflows/cd-dev.yml | develop 브랜치에 대한 CD 파이프라인 정의 - CI workflow 재사용 및 SSH 배포 |
| scripts/cd-dev.sh | 원격 서버에서 실행되는 배포 스크립트 - Docker 설정, 이미지 pull, 컨테이너 재시작 |
| docker/kyeoungwoon/dockerfile | 프로덕션 환경용 Spring Boot 애플리케이션 Docker 이미지 정의 |
scripts/cd-dev.sh
Outdated
| if [ $? -eq 0 ]; then | ||
| echo "✅ Docker Hub 로그인 성공" | ||
| else | ||
| echo "❌ Docker Hub 로그인 실패" | ||
| exit 1 | ||
| fi |
There was a problem hiding this comment.
P2: Docker 로그인 시 비밀번호가 프로세스 인자로 전달되어 프로세스 목록에 노출될 수 있습니다. 현재는 --password-stdin을 사용하여 안전하게 처리하고 있지만, $? 검사 방식이 안전하지 않습니다.
셸 스크립트에서 'set -e'가 설정되어 있어 docker login이 실패하면 자동으로 스크립트가 종료되므로, 54-59행의 조건문이 실행되지 않습니다. 이 검증 로직은 불필요하거나, 'set -e'를 제거하고 명시적인 오류 처리를 수행해야 합니다.
Backend Test Results0 tests 0 ✅ 0s ⏱️ Results for commit 0e53acb. ♻️ This comment has been updated with latest results. |
There was a problem hiding this comment.
Actionable comments posted: 9
🤖 Fix all issues with AI agents
In @.github/workflows/cd-dev.yml:
- Around line 7-11: The workflow currently references 'cd.yml' in the paths list
which is incorrect; update the paths array in .github/workflows/cd-dev.yml to
replace 'cd.yml' with the actual filename 'cd-dev.yml' so changes to the
deployment workflow trigger correctly (edit the entry that currently reads
'cd.yml' to 'cd-dev.yml').
- Around line 46-61: Add the missing APP_DIR_PRODUCTION and APP_DIR_DEVELOPMENT
environment variables to the SSH action: define them in the env: block (e.g.,
APP_DIR_PRODUCTION: ${{ secrets.APP_DIR_PRODUCTION }} and APP_DIR_DEVELOPMENT:
${{ secrets.APP_DIR_DEVELOPMENT }}) and include their names in the with: envs
comma-separated list (alongside APPLICATION_PROD,APPLICATION_DEV,...). This
ensures the deployment script referenced by script_path: cd-dev.sh receives the
required APP_DIR_PRODUCTION and APP_DIR_DEVELOPMENT values that it validates.
In @.github/workflows/ci.yml:
- Around line 178-185: The Build Summary step is incorrectly referencing
steps.set-env.outputs.environment and .image_tag even though there is no step
with id set-env in this job; update the output references in the "Build Summary"
step to use needs.build-and-test.outputs.environment and
needs.build-and-test.outputs.image_tag so the job reads outputs from the
upstream job (ensure the job lists needs: build-and-test if not already).
- Around line 68-96: The if/elif chain inside the "set-env" step can leave
ENVIRONMENT unset due to a missing else after the INPUT_ENV check; ensure every
branch sets ENVIRONMENT by adding an explicit else or restructuring the
conditionals so that when INPUT_ENV is empty the subsequent branch checks
(github.ref for main/develop) always run; update the logic around INPUT_ENV,
ENVIRONMENT and the github.event_name/github.ref checks so ENVIRONMENT is always
assigned before it's echoed to GITHUB_OUTPUT (refer to variables INPUT_ENV,
ENVIRONMENT, github.event_name, github.ref and the "set-env" step).
In @docker/app/dockerfile:
- Around line 10-14: The RUN step installs curl without a pinned version; change
the Dockerfile RUN line that currently uses "apk add --no-cache curl" to pin a
specific curl package version (e.g., "apk add --no-cache curl=<version>" or the
exact release string like "curl=<pkg>-r<revision>") so builds are reproducible
and secure, and verify the correct available version for your Alpine base with
"apk search curl" before setting the version.
In @scripts/cd-dev.sh:
- Around line 1-2: The script currently enables "set -e" but should also enable
strict error handling; add "set -u" and "set -o pipefail" alongside the existing
"set -e" (i.e., in the top of the script near the existing set -e) so that unset
variables cause failures and pipeline errors propagate, improving robustness of
the cd-dev.sh entrypoint.
- Around line 62-72: Replace the indirect exit-code check that uses `$?` after
running the piped `docker login` with a direct conditional that runs the piped
command inside the `if` (i.e., use `if echo "$DOCKERHUB_TOKEN" | docker login -u
"$DOCKERHUB_USERNAME" --password-stdin; then ... fi`), removing the separate
`$?` test and leaving the success and failure echo/exit branches intact so the
script directly evaluates the command's exit status.
- Around line 52-60: Wrap the $APP_DIR variable in double quotes wherever it’s
used to avoid issues with spaces/special chars: update mkdir -p $APP_DIR/config,
the three echo redirects that write to "$APP_DIR/config/application-*.yml"
(specifically the echo lines that write application-prod.yml,
application-dev.yml, application-secret.yml), and the chmod/echo lines to
reference "$APP_DIR/config/application-*.yml" or the explicit paths (e.g.,
"$APP_DIR/config/application-prod.yml") so all path expansions use quoted
"$APP_DIR" consistently.
- Around line 74-90: Ensure variables are quoted and docker-compose validated:
wrap APP_DIR in quotes wherever used (e.g., "cd \"$APP_DIR\"" and "mkdir -p
\"$APP_DIR/config\""), check for the presence of the docker-compose.yml file in
"$APP_DIR" before running docker compose (validate that the file contains the
expected ${TAG}/${DOCKER_IMAGE_NAME} variables or adjust to the actual compose
file), replace the post-command status check "if [ $? -eq 0 ]" with a direct
command conditional (e.g., if docker compose up -d; then ...) and fail fast with
descriptive error messages if any validation (missing file, missing variables,
or docker compose failure) detects a problem.
📜 Review details
Configuration used: Path: .coderabbit.yaml
Review profile: ASSERTIVE
Plan: Pro
📒 Files selected for processing (4)
.github/workflows/cd-dev.yml.github/workflows/ci.ymldocker/app/dockerfilescripts/cd-dev.sh
🧰 Additional context used
🪛 actionlint (1.7.10)
.github/workflows/ci.yml
70-70: shellcheck reported issue in this script: SC2086:info:19:38: Double quote to prevent globbing and word splitting
(shellcheck)
70-70: shellcheck reported issue in this script: SC2086:info:22:36: Double quote to prevent globbing and word splitting
(shellcheck)
70-70: shellcheck reported issue in this script: SC2086:info:26:34: Double quote to prevent globbing and word splitting
(shellcheck)
180-180: shellcheck reported issue in this script: SC2086:info:1:39: Double quote to prevent globbing and word splitting
(shellcheck)
180-180: shellcheck reported issue in this script: SC2086:info:2:12: Double quote to prevent globbing and word splitting
(shellcheck)
180-180: shellcheck reported issue in this script: SC2086:info:3:71: Double quote to prevent globbing and word splitting
(shellcheck)
180-180: shellcheck reported issue in this script: SC2086:info:4:67: Double quote to prevent globbing and word splitting
(shellcheck)
180-180: shellcheck reported issue in this script: SC2086:info:5:53: Double quote to prevent globbing and word splitting
(shellcheck)
180-180: shellcheck reported issue in this script: SC2129:style:1:1: Consider using { cmd1; cmd2; } >> file instead of individual redirects
(shellcheck)
180-180: property "set-env" is not defined in object type {}
(expression)
.github/workflows/cd-dev.yml
64-64: shellcheck reported issue in this script: SC2086:info:1:43: Double quote to prevent globbing and word splitting
(shellcheck)
64-64: shellcheck reported issue in this script: SC2086:info:2:12: Double quote to prevent globbing and word splitting
(shellcheck)
64-64: shellcheck reported issue in this script: SC2086:info:3:53: Double quote to prevent globbing and word splitting
(shellcheck)
64-64: shellcheck reported issue in this script: SC2086:info:4:48: Double quote to prevent globbing and word splitting
(shellcheck)
64-64: shellcheck reported issue in this script: SC2086:info:5:43: Double quote to prevent globbing and word splitting
(shellcheck)
64-64: shellcheck reported issue in this script: SC2086:info:6:87: Double quote to prevent globbing and word splitting
(shellcheck)
64-64: shellcheck reported issue in this script: SC2086:info:7:56: Double quote to prevent globbing and word splitting
(shellcheck)
64-64: shellcheck reported issue in this script: SC2086:info:8:43: Double quote to prevent globbing and word splitting
(shellcheck)
64-64: shellcheck reported issue in this script: SC2129:style:1:1: Consider using { cmd1; cmd2; } >> file instead of individual redirects
(shellcheck)
🪛 Hadolint (2.14.0)
docker/app/dockerfile
[warning] 10-10: Pin versions in apk add. Instead of apk add <package> use apk add <package>=<version>
(DL3018)
🪛 Shellcheck (0.11.0)
scripts/cd-dev.sh
[info] 53-53: Double quote to prevent globbing and word splitting.
(SC2086)
[info] 54-54: Double quote to prevent globbing and word splitting.
(SC2086)
[info] 55-55: Double quote to prevent globbing and word splitting.
(SC2086)
[info] 56-56: Double quote to prevent globbing and word splitting.
(SC2086)
[info] 59-59: Double quote to prevent globbing and word splitting.
(SC2086)
[style] 67-67: Check exit code directly with e.g. 'if mycmd;', not indirectly with $?.
(SC2181)
[info] 75-75: Double quote to prevent globbing and word splitting.
(SC2086)
[style] 85-85: Check exit code directly with e.g. 'if mycmd;', not indirectly with $?.
(SC2181)
🪛 YAMLlint (1.37.1)
.github/workflows/ci.yml
[warning] 3-3: truthy value should be one of [false, true]
(truthy)
[error] 57-57: too many spaces inside brackets
(brackets)
[error] 57-57: too many spaces inside brackets
(brackets)
[error] 150-150: too many spaces inside brackets
(brackets)
[error] 150-150: too many spaces inside brackets
(brackets)
🔇 Additional comments (10)
docker/app/dockerfile (3)
1-2: 베이스 이미지 선택이 적절합니다.Amazon Corretto 21 Alpine JRE는 프로덕션 환경에 적합한 선택이며, CI 워크플로우의 JDK 버전(21)과도 일치합니다.
36-45: JVM 옵션 설정이 적절합니다.G1GC, 메타스페이스 제한, OOM 시 힙 덤프 등 프로덕션 환경에 적합한 JVM 옵션이 설정되어 있습니다. 힙 메모리가 1400m로 고정되어 있는데, 이는 개발 환경에 적합한 설정으로 보입니다. 프로덕션 환경에서는 컨테이너 리소스와 예상 부하에 따라 조정이 필요할 수 있습니다.
28-32: Spring Boot Actuator 의존성이 확인되었습니다.헬스체크 설정이 올바릅니다.
build.gradle.kts에 Spring Boot Actuator 의존성(spring-boot-starter-actuator)이 포함되어 있으며, 보안 설정에서/actuator/**접근이 허용되어 있습니다.scripts/cd-dev.sh (2)
10-21: 환경 변수 검증이 잘 구현되어 있습니다.필수 환경 변수를 모두 검증하고 있으며, 명확한 에러 메시지를 제공합니다. 배포 디렉토리(APP_DIR_PRODUCTION, APP_DIR_DEVELOPMENT)의 존재 여부나 쓰기 권한은 사용 시점에 자동으로 확인되므로 현재 구현으로 충분합니다.
27-40: Docker 설치 확인 로직이 적절합니다.Docker 경로 문제를 자동으로 해결하고, 발견되지 않을 경우 명확한 에러와 함께 종료합니다.
.github/workflows/ci.yml (3)
1-38: 워크플로우 구조가 잘 설계되어 있습니다.재사용 가능한 워크플로우 인터페이스(
workflow_call)와 명확한 출력 정의가 훌륭합니다. 동시성 제어를 통해 리소스 낭비를 방지하고 있습니다.
98-123: 빌드 및 테스트 파이프라인이 적절합니다.컴파일 검사와 테스트를 분리하고, 테스트 결과를 게시하는 등 모범 사례를 따르고 있습니다.
136-147: docker/kyeoungwoon/dockerfile 사용에 대해 명확히 해주세요.Line 140에서
docker/kyeoungwoon/dockerfile을 사용하고 있습니다. 저장소에는docker/app/dockerfile과docker/dev/dockerfile도 이미 존재하는데,docker/app/dockerfile은 코드베이스 어디에서도 참조되지 않고 있습니다. 프로덕션 CI/CD에서 개발자 이름의 Dockerfile을 사용하는 것이 의도된 설정인지, 아니면docker/app/dockerfile로 변경해야 하는지 확인이 필요합니다..github/workflows/cd-dev.yml (2)
23-29: CI 워크플로우 재사용이 적절합니다.CI 워크플로우를 재사용하여 코드 중복을 제거하고 일관성을 유지하고 있습니다.
62-72: 배포 요약 생성이 잘 구현되어 있습니다.배포 결과를 GitHub Step Summary에 기록하여 배포 이력을 추적할 수 있도록 하고 있습니다.
.github/workflows/cd-dev.yml
Outdated
| paths: | ||
| - 'src/**' | ||
| - 'build.gradle.kts' | ||
| - 'docker/**' | ||
| - 'cd.yml' |
There was a problem hiding this comment.
워크플로우 파일 경로가 잘못되었습니다.
Line 11에서 cd.yml을 참조하고 있지만, 실제 파일명은 cd-dev.yml입니다. 이로 인해 워크플로우 파일 변경 시 자동 배포가 트리거되지 않습니다.
🔧 제안하는 수정안
paths:
- 'src/**'
- 'build.gradle.kts'
- 'docker/**'
- - 'cd.yml'
+ - '.github/workflows/cd-dev.yml'🤖 Prompt for AI Agents
In @.github/workflows/cd-dev.yml around lines 7 - 11, The workflow currently
references 'cd.yml' in the paths list which is incorrect; update the paths array
in .github/workflows/cd-dev.yml to replace 'cd.yml' with the actual filename
'cd-dev.yml' so changes to the deployment workflow trigger correctly (edit the
entry that currently reads 'cd.yml' to 'cd-dev.yml').
.github/workflows/cd-dev.yml
Outdated
| - name: SSH 접속 및 스크립트 실행 | ||
| uses: appleboy/ssh-action@v1 | ||
| env: | ||
| APPLICATION_PROD: ${{ secrets.APPLICATION_PROD }} | ||
| APPLICATION_DEV: ${{ secrets.APPLICATION_DEV }} | ||
| APPLICATION_SECRET: ${{ secrets.APPLICATION_SECRET }} | ||
| DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }} | ||
| DOCKERHUB_USERNAME: ${{ secrets.DOCKERHUB_USERNAME }} | ||
| with: | ||
| host: ${{ secrets.SERVER_SSH_HOST }} | ||
| username: ${{ secrets.SERVER_SSH_USERNAME }} | ||
| key: ${{ secrets.SERVER_SSH_PRIVATE_KEY }} | ||
| port: ${{ secrets.SERVER_SSH_PORT }} | ||
| envs: APPLICATION_PROD,APPLICATION_DEV,APPLICATION_SECRET,ENVIRONMENT,IMAGE_TAG,REPO_OWNER,DOCKER_IMAGE_NAME,DOCKERHUB_TOKEN,DOCKERHUB_USERNAME | ||
| script_path: scripts/cd-dev.sh | ||
|
|
There was a problem hiding this comment.
필수 환경 변수가 누락되었습니다.
Line 59의 envs 목록에 APP_DIR_PRODUCTION과 APP_DIR_DEVELOPMENT가 포함되어 있지 않습니다. 배포 스크립트(cd-dev.sh)는 이 변수들을 필수로 검증하므로(lines 16-17), 없으면 배포가 실패합니다.
🐛 제안하는 수정안
- name: SSH 접속 및 스크립트 실행
uses: appleboy/ssh-action@v1
env:
APPLICATION_PROD: ${{ secrets.APPLICATION_PROD }}
APPLICATION_DEV: ${{ secrets.APPLICATION_DEV }}
APPLICATION_SECRET: ${{ secrets.APPLICATION_SECRET }}
DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }}
DOCKERHUB_USERNAME: ${{ secrets.DOCKERHUB_USERNAME }}
+ DOCKER_IMAGE_NAME: ${{ secrets.DOCKER_IMAGE_NAME }}
+ APP_DIR_PRODUCTION: ${{ secrets.APP_DIR_PRODUCTION }}
+ APP_DIR_DEVELOPMENT: ${{ secrets.APP_DIR_DEVELOPMENT }}
with:
host: ${{ secrets.SERVER_SSH_HOST }}
username: ${{ secrets.SERVER_SSH_USERNAME }}
key: ${{ secrets.SERVER_SSH_PRIVATE_KEY }}
port: ${{ secrets.SERVER_SSH_PORT }}
- envs: APPLICATION_PROD,APPLICATION_DEV,APPLICATION_SECRET,ENVIRONMENT,IMAGE_TAG,REPO_OWNER,DOCKER_IMAGE_NAME,DOCKERHUB_TOKEN,DOCKERHUB_USERNAME
+ envs: APPLICATION_PROD,APPLICATION_DEV,APPLICATION_SECRET,ENVIRONMENT,IMAGE_TAG,REPO_OWNER,DOCKER_IMAGE_NAME,DOCKERHUB_TOKEN,DOCKERHUB_USERNAME,APP_DIR_PRODUCTION,APP_DIR_DEVELOPMENT
script_path: scripts/cd-dev.sh📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| - name: SSH 접속 및 스크립트 실행 | |
| uses: appleboy/ssh-action@v1 | |
| env: | |
| APPLICATION_PROD: ${{ secrets.APPLICATION_PROD }} | |
| APPLICATION_DEV: ${{ secrets.APPLICATION_DEV }} | |
| APPLICATION_SECRET: ${{ secrets.APPLICATION_SECRET }} | |
| DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }} | |
| DOCKERHUB_USERNAME: ${{ secrets.DOCKERHUB_USERNAME }} | |
| with: | |
| host: ${{ secrets.SERVER_SSH_HOST }} | |
| username: ${{ secrets.SERVER_SSH_USERNAME }} | |
| key: ${{ secrets.SERVER_SSH_PRIVATE_KEY }} | |
| port: ${{ secrets.SERVER_SSH_PORT }} | |
| envs: APPLICATION_PROD,APPLICATION_DEV,APPLICATION_SECRET,ENVIRONMENT,IMAGE_TAG,REPO_OWNER,DOCKER_IMAGE_NAME,DOCKERHUB_TOKEN,DOCKERHUB_USERNAME | |
| script_path: scripts/cd-dev.sh | |
| - name: SSH 접속 및 스크립트 실행 | |
| uses: appleboy/ssh-action@v1 | |
| env: | |
| APPLICATION_PROD: ${{ secrets.APPLICATION_PROD }} | |
| APPLICATION_DEV: ${{ secrets.APPLICATION_DEV }} | |
| APPLICATION_SECRET: ${{ secrets.APPLICATION_SECRET }} | |
| DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }} | |
| DOCKERHUB_USERNAME: ${{ secrets.DOCKERHUB_USERNAME }} | |
| DOCKER_IMAGE_NAME: ${{ secrets.DOCKER_IMAGE_NAME }} | |
| APP_DIR_PRODUCTION: ${{ secrets.APP_DIR_PRODUCTION }} | |
| APP_DIR_DEVELOPMENT: ${{ secrets.APP_DIR_DEVELOPMENT }} | |
| with: | |
| host: ${{ secrets.SERVER_SSH_HOST }} | |
| username: ${{ secrets.SERVER_SSH_USERNAME }} | |
| key: ${{ secrets.SERVER_SSH_PRIVATE_KEY }} | |
| port: ${{ secrets.SERVER_SSH_PORT }} | |
| envs: APPLICATION_PROD,APPLICATION_DEV,APPLICATION_SECRET,ENVIRONMENT,IMAGE_TAG,REPO_OWNER,DOCKER_IMAGE_NAME,DOCKERHUB_TOKEN,DOCKERHUB_USERNAME,APP_DIR_PRODUCTION,APP_DIR_DEVELOPMENT | |
| script_path: scripts/cd-dev.sh |
🤖 Prompt for AI Agents
In @.github/workflows/cd-dev.yml around lines 46 - 61, Add the missing
APP_DIR_PRODUCTION and APP_DIR_DEVELOPMENT environment variables to the SSH
action: define them in the env: block (e.g., APP_DIR_PRODUCTION: ${{
secrets.APP_DIR_PRODUCTION }} and APP_DIR_DEVELOPMENT: ${{
secrets.APP_DIR_DEVELOPMENT }}) and include their names in the with: envs
comma-separated list (alongside APPLICATION_PROD,APPLICATION_DEV,...). This
ensures the deployment script referenced by script_path: cd-dev.sh receives the
required APP_DIR_PRODUCTION and APP_DIR_DEVELOPMENT values that it validates.
| - name: Set deployment environment | ||
| id: set-env | ||
| run: | | ||
| INPUT_ENV="${{ inputs.environment }}" | ||
| # PR일 때는 'test' 환경으로 설정 | ||
| if [[ "${{ github.event_name }}" == "pull_request" ]]; then | ||
| echo "Running in PR mode - Setting test environment for build" | ||
| ENVIRONMENT="test" | ||
| elif [[ -n "$INPUT_ENV" ]]; then | ||
| ENVIRONMENT="$INPUT_ENV" | ||
| # CD에서 호출한 경우 branch에 따라서 환경 결정 | ||
| elif [[ "${{ github.ref }}" == "refs/heads/main" ]]; then | ||
| ENVIRONMENT="prod" | ||
| elif [[ "${{ github.ref }}" == "refs/heads/develop" ]]; then | ||
| ENVIRONMENT="dev" | ||
| else | ||
| ENVIRONMENT="test" | ||
| fi | ||
| echo "environment=${ENVIRONMENT}" >> $GITHUB_OUTPUT | ||
| REPO_OWNER=$(echo "${{ github.repository_owner }}" | tr '[:upper:]' '[:lower:]') | ||
| echo "repo_owner=${REPO_OWNER}" >> $GITHUB_OUTPUT | ||
| SHORT_SHA=$(echo "${{ github.sha }}" | cut -c1-7) | ||
| IMAGE_TAG="${ENVIRONMENT}-${SHORT_SHA}" | ||
| echo "image_tag=${IMAGE_TAG}" >> $GITHUB_OUTPUT |
There was a problem hiding this comment.
🧹 Nitpick | 🔵 Trivial
환경 결정 로직에 else 절이 누락되었습니다.
Line 77-79의 조건문에 else 절이 없어, 특정 경우에 ENVIRONMENT 변수가 설정되지 않을 수 있습니다. Line 86의 else가 전체 if-elif 체인의 최종 else로 작동하므로 로직상 문제는 없지만, 가독성을 위해 구조를 명확히 하는 것이 좋습니다.
♻️ 제안하는 수정안
# PR일 때는 'test' 환경으로 설정
if [[ "${{ github.event_name }}" == "pull_request" ]]; then
echo "Running in PR mode - Setting test environment for build"
ENVIRONMENT="test"
elif [[ -n "$INPUT_ENV" ]]; then
ENVIRONMENT="$INPUT_ENV"
-
- # CD에서 호출한 경우 branch에 따라서 환경 결정
elif [[ "${{ github.ref }}" == "refs/heads/main" ]]; then
ENVIRONMENT="prod"
elif [[ "${{ github.ref }}" == "refs/heads/develop" ]]; then
ENVIRONMENT="dev"
else
ENVIRONMENT="test"
fi🧰 Tools
🪛 actionlint (1.7.10)
70-70: shellcheck reported issue in this script: SC2086:info:19:38: Double quote to prevent globbing and word splitting
(shellcheck)
70-70: shellcheck reported issue in this script: SC2086:info:22:36: Double quote to prevent globbing and word splitting
(shellcheck)
70-70: shellcheck reported issue in this script: SC2086:info:26:34: Double quote to prevent globbing and word splitting
(shellcheck)
🤖 Prompt for AI Agents
In @.github/workflows/ci.yml around lines 68 - 96, The if/elif chain inside the
"set-env" step can leave ENVIRONMENT unset due to a missing else after the
INPUT_ENV check; ensure every branch sets ENVIRONMENT by adding an explicit else
or restructuring the conditionals so that when INPUT_ENV is empty the subsequent
branch checks (github.ref for main/develop) always run; update the logic around
INPUT_ENV, ENVIRONMENT and the github.event_name/github.ref checks so
ENVIRONMENT is always assigned before it's echoed to GITHUB_OUTPUT (refer to
variables INPUT_ENV, ENVIRONMENT, github.event_name, github.ref and the
"set-env" step).
| RUN apk add --no-cache curl && \ | ||
| addgroup -S spring && \ | ||
| adduser -S spring -G spring && \ | ||
| mkdir -p /app/logs && \ | ||
| chown -R spring:spring /app |
There was a problem hiding this comment.
🧹 Nitpick | 🔵 Trivial
패키지 버전 고정을 고려하세요.
curl 패키지가 버전 고정 없이 설치되고 있습니다. 빌드 재현성과 보안을 위해 특정 버전을 명시하는 것이 권장됩니다.
♻️ 제안하는 수정안
-RUN apk add --no-cache curl && \
+RUN apk add --no-cache curl=8.5.0-r0 && \
addgroup -S spring && \
adduser -S spring -G spring && \
mkdir -p /app/logs && \
chown -R spring:spring /app참고: Alpine 버전에 따라 사용 가능한 curl 버전이 다를 수 있으므로 apk search curl 명령으로 확인 후 적절한 버전을 지정하세요.
📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| RUN apk add --no-cache curl && \ | |
| addgroup -S spring && \ | |
| adduser -S spring -G spring && \ | |
| mkdir -p /app/logs && \ | |
| chown -R spring:spring /app | |
| RUN apk add --no-cache curl=8.5.0-r0 && \ | |
| addgroup -S spring && \ | |
| adduser -S spring -G spring && \ | |
| mkdir -p /app/logs && \ | |
| chown -R spring:spring /app |
🧰 Tools
🪛 Hadolint (2.14.0)
[warning] 10-10: Pin versions in apk add. Instead of apk add <package> use apk add <package>=<version>
(DL3018)
🤖 Prompt for AI Agents
In @docker/app/dockerfile around lines 10 - 14, The RUN step installs curl
without a pinned version; change the Dockerfile RUN line that currently uses
"apk add --no-cache curl" to pin a specific curl package version (e.g., "apk add
--no-cache curl=<version>" or the exact release string like
"curl=<pkg>-r<revision>") so builds are reproducible and secure, and verify the
correct available version for your Alpine base with "apk search curl" before
setting the version.
scripts/cd-dev.sh
Outdated
| #!/bin/bash | ||
| set -e |
There was a problem hiding this comment.
🧹 Nitpick | 🔵 Trivial
에러 핸들링 개선을 고려하세요.
set -e가 설정되어 있어 좋습니다. 추가로 set -u(미설정 변수 감지)와 set -o pipefail(파이프라인 에러 전파)을 추가하면 스크립트의 안정성을 더욱 향상시킬 수 있습니다.
♻️ 제안하는 수정안
#!/bin/bash
-set -e
+set -euo pipefail📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| #!/bin/bash | |
| set -e | |
| #!/bin/bash | |
| set -euo pipefail |
🤖 Prompt for AI Agents
In @scripts/cd-dev.sh around lines 1 - 2, The script currently enables "set -e"
but should also enable strict error handling; add "set -u" and "set -o pipefail"
alongside the existing "set -e" (i.e., in the top of the script near the
existing set -e) so that unset variables cause failures and pipeline errors
propagate, improving robustness of the cd-dev.sh entrypoint.
scripts/cd-dev.sh
Outdated
| # [3] 설정 파일 생성 | ||
| mkdir -p $APP_DIR/config | ||
| echo "$APPLICATION_PROD" > $APP_DIR/config/application-prod.yml | ||
| echo "$APPLICATION_DEV" > $APP_DIR/config/application-dev.yml | ||
| echo "$APPLICATION_SECRET" > $APP_DIR/config/application-secret.yml | ||
|
|
||
| # 보안을 위해 권한 설정 (선택사항) | ||
| chmod 600 $APP_DIR/config/application-*.yml | ||
| echo "✅ 환경 설정 파일 생성 완료" |
There was a problem hiding this comment.
변수를 따옴표로 감싸야 합니다.
$APP_DIR 변수가 따옴표 없이 사용되고 있습니다. 경로에 공백이나 특수문자가 포함될 경우 예상치 못한 동작이 발생할 수 있습니다.
🔧 제안하는 수정안
# [3] 설정 파일 생성
-mkdir -p $APP_DIR/config
-echo "$APPLICATION_PROD" > $APP_DIR/config/application-prod.yml
-echo "$APPLICATION_DEV" > $APP_DIR/config/application-dev.yml
-echo "$APPLICATION_SECRET" > $APP_DIR/config/application-secret.yml
+mkdir -p "$APP_DIR/config"
+echo "$APPLICATION_PROD" > "$APP_DIR/config/application-prod.yml"
+echo "$APPLICATION_DEV" > "$APP_DIR/config/application-dev.yml"
+echo "$APPLICATION_SECRET" > "$APP_DIR/config/application-secret.yml"
# 보안을 위해 권한 설정 (선택사항)
-chmod 600 $APP_DIR/config/application-*.yml
+chmod 600 "$APP_DIR"/config/application-*.yml
echo "✅ 환경 설정 파일 생성 완료"📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| # [3] 설정 파일 생성 | |
| mkdir -p $APP_DIR/config | |
| echo "$APPLICATION_PROD" > $APP_DIR/config/application-prod.yml | |
| echo "$APPLICATION_DEV" > $APP_DIR/config/application-dev.yml | |
| echo "$APPLICATION_SECRET" > $APP_DIR/config/application-secret.yml | |
| # 보안을 위해 권한 설정 (선택사항) | |
| chmod 600 $APP_DIR/config/application-*.yml | |
| echo "✅ 환경 설정 파일 생성 완료" | |
| # [3] 설정 파일 생성 | |
| mkdir -p "$APP_DIR/config" | |
| echo "$APPLICATION_PROD" > "$APP_DIR/config/application-prod.yml" | |
| echo "$APPLICATION_DEV" > "$APP_DIR/config/application-dev.yml" | |
| echo "$APPLICATION_SECRET" > "$APP_DIR/config/application-secret.yml" | |
| # 보안을 위해 권한 설정 (선택사항) | |
| chmod 600 "$APP_DIR"/config/application-*.yml | |
| echo "✅ 환경 설정 파일 생성 완료" |
🧰 Tools
🪛 Shellcheck (0.11.0)
[info] 53-53: Double quote to prevent globbing and word splitting.
(SC2086)
[info] 54-54: Double quote to prevent globbing and word splitting.
(SC2086)
[info] 55-55: Double quote to prevent globbing and word splitting.
(SC2086)
[info] 56-56: Double quote to prevent globbing and word splitting.
(SC2086)
[info] 59-59: Double quote to prevent globbing and word splitting.
(SC2086)
🤖 Prompt for AI Agents
In @scripts/cd-dev.sh around lines 52 - 60, Wrap the $APP_DIR variable in double
quotes wherever it’s used to avoid issues with spaces/special chars: update
mkdir -p $APP_DIR/config, the three echo redirects that write to
"$APP_DIR/config/application-*.yml" (specifically the echo lines that write
application-prod.yml, application-dev.yml, application-secret.yml), and the
chmod/echo lines to reference "$APP_DIR/config/application-*.yml" or the
explicit paths (e.g., "$APP_DIR/config/application-prod.yml") so all path
expansions use quoted "$APP_DIR" consistently.
scripts/cd-dev.sh
Outdated
| # [4] Docker Hub 로그인 | ||
| echo "" | ||
| echo "[2] Docker Hub 로그인" | ||
| echo "$DOCKERHUB_TOKEN" | docker login -u "$DOCKERHUB_USERNAME" --password-stdin | ||
|
|
||
| if [ $? -eq 0 ]; then | ||
| echo "✅ Docker Hub 로그인 성공" | ||
| else | ||
| echo "❌ Docker Hub 로그인 실패" | ||
| exit 1 | ||
| fi |
There was a problem hiding this comment.
🧹 Nitpick | 🔵 Trivial
종료 코드 검사를 직접적으로 수행하세요.
$?를 사용한 간접적인 검사보다 명령어를 직접 조건문에서 실행하는 것이 더 관용적입니다.
♻️ 제안하는 수정안
# [4] Docker Hub 로그인
echo ""
echo "[2] Docker Hub 로그인"
-echo "$DOCKERHUB_TOKEN" | docker login -u "$DOCKERHUB_USERNAME" --password-stdin
-
-if [ $? -eq 0 ]; then
+if echo "$DOCKERHUB_TOKEN" | docker login -u "$DOCKERHUB_USERNAME" --password-stdin; then
echo "✅ Docker Hub 로그인 성공"
else
echo "❌ Docker Hub 로그인 실패"
exit 1
fi📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| # [4] Docker Hub 로그인 | |
| echo "" | |
| echo "[2] Docker Hub 로그인" | |
| echo "$DOCKERHUB_TOKEN" | docker login -u "$DOCKERHUB_USERNAME" --password-stdin | |
| if [ $? -eq 0 ]; then | |
| echo "✅ Docker Hub 로그인 성공" | |
| else | |
| echo "❌ Docker Hub 로그인 실패" | |
| exit 1 | |
| fi | |
| # [4] Docker Hub 로그인 | |
| echo "" | |
| echo "[2] Docker Hub 로그인" | |
| if echo "$DOCKERHUB_TOKEN" | docker login -u "$DOCKERHUB_USERNAME" --password-stdin; then | |
| echo "✅ Docker Hub 로그인 성공" | |
| else | |
| echo "❌ Docker Hub 로그인 실패" | |
| exit 1 | |
| fi |
🧰 Tools
🪛 Shellcheck (0.11.0)
[style] 67-67: Check exit code directly with e.g. 'if mycmd;', not indirectly with $?.
(SC2181)
🤖 Prompt for AI Agents
In @scripts/cd-dev.sh around lines 62 - 72, Replace the indirect exit-code check
that uses `$?` after running the piped `docker login` with a direct conditional
that runs the piped command inside the `if` (i.e., use `if echo
"$DOCKERHUB_TOKEN" | docker login -u "$DOCKERHUB_USERNAME" --password-stdin;
then ... fi`), removing the separate `$?` test and leaving the success and
failure echo/exit branches intact so the script directly evaluates the command's
exit status.
scripts/cd-dev.sh
Outdated
| # [5] Docker Compose 실행 | ||
| cd $APP_DIR | ||
|
|
||
| # 롤백 및 버전 관리를 위해 태그 지정 (docker-compose.yml에서 ${TAG}를 쓴다고 가정) | ||
| export TAG=$IMAGE_TAG | ||
| export DOCKER_IMAGE_NAME=$DOCKER_IMAGE_NAME | ||
|
|
||
| # 기존 컨테이너 중지 및 최신 이미지 Pull & 실행 | ||
| docker compose pull | ||
| docker compose up -d | ||
|
|
||
| if [ $? -eq 0 ]; then | ||
| echo "✅ 컨테이너 재시작 성공" | ||
| else | ||
| echo "❌ 컨테이너 재시작 실패" | ||
| exit 1 | ||
| fi |
There was a problem hiding this comment.
🧩 Analysis chain
🏁 Script executed:
# First, verify the script file exists and check its content around lines 74-90
git ls-files scripts/cd-dev.sh | head -20Repository: UMC-PRODUCT/umc-product-server
Length of output: 91
🏁 Script executed:
# Check the actual content of lines 74-90 in the script
sed -n '74,90p' scripts/cd-dev.shRepository: UMC-PRODUCT/umc-product-server
Length of output: 397
🏁 Script executed:
# Search for docker-compose.yml files in the repository
fd -t f "docker-compose.yml"Repository: UMC-PRODUCT/umc-product-server
Length of output: 92
🏁 Script executed:
# Check for any docker-compose files with different patterns
fd -t f "docker-compose"Repository: UMC-PRODUCT/umc-product-server
Length of output: 92
🏁 Script executed:
# Search for APP_DIR references in the script to understand its value
rg "APP_DIR" scripts/cd-dev.sh -A 2 -B 2Repository: UMC-PRODUCT/umc-product-server
Length of output: 1067
🏁 Script executed:
# Check if docker-compose.yml uses the environment variables mentioned
cat docker-compose.ymlRepository: UMC-PRODUCT/umc-product-server
Length of output: 1272
🏁 Script executed:
# Check the broader context of the script to see if APP_DIR might have spaces
head -n 80 scripts/cd-dev.sh | tail -n 20Repository: UMC-PRODUCT/umc-product-server
Length of output: 474
🏁 Script executed:
# Search for how APP_DIR is used elsewhere in the script
rg "APP_DIR" scripts/cd-dev.shRepository: UMC-PRODUCT/umc-product-server
Length of output: 621
변수 인용 및 도커 구성 파일 검증이 필요합니다.
- 75번 줄의
cd $APP_DIR과 59번 줄의mkdir -p $APP_DIR/config등에서 변수가 인용되지 않았습니다. APP_DIR에 공백이 포함되면 문제가 발생합니다. - 도커 컴포즈 파일의 존재를 런타임에 확인하지 않고 있습니다. APP_DIR 배포 경로에
docker-compose.yml파일이 실제로 있는지 검증해야 합니다. - 85번 줄의
if [ $? -eq 0 ]는 직접 조건으로 변경하는 것이 좋습니다. - 중요: 스크립트 주석은 docker-compose.yml에서
${TAG},${DOCKER_IMAGE_NAME}변수를 사용한다고 가정하지만, 실제 파일에는 이러한 변수가 없습니다. 배포 환경에 맞는 올바른 docker-compose.yml 파일을 사용하고 있는지 확인하세요.
🔧 제안하는 수정안
# [5] Docker Compose 실행
-cd $APP_DIR
+cd "$APP_DIR" || exit 1
+
+# docker-compose.yml 파일 확인
+if [ ! -f "docker-compose.yml" ]; then
+ echo "❌ docker-compose.yml 파일을 찾을 수 없습니다"
+ exit 1
+fi
# 롤백 및 버전 관리를 위해 태그 지정 (docker-compose.yml에서 ${TAG}를 쓴다고 가정)
export TAG=$IMAGE_TAG
export DOCKER_IMAGE_NAME=$DOCKER_IMAGE_NAME
# 기존 컨테이너 중지 및 최신 이미지 Pull & 실행
docker compose pull
-docker compose up -d
-
-if [ $? -eq 0 ]; then
+if docker compose up -d; then
echo "✅ 컨테이너 재시작 성공"
else
echo "❌ 컨테이너 재시작 실패"
exit 1
fi📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| # [5] Docker Compose 실행 | |
| cd $APP_DIR | |
| # 롤백 및 버전 관리를 위해 태그 지정 (docker-compose.yml에서 ${TAG}를 쓴다고 가정) | |
| export TAG=$IMAGE_TAG | |
| export DOCKER_IMAGE_NAME=$DOCKER_IMAGE_NAME | |
| # 기존 컨테이너 중지 및 최신 이미지 Pull & 실행 | |
| docker compose pull | |
| docker compose up -d | |
| if [ $? -eq 0 ]; then | |
| echo "✅ 컨테이너 재시작 성공" | |
| else | |
| echo "❌ 컨테이너 재시작 실패" | |
| exit 1 | |
| fi | |
| # [5] Docker Compose 실행 | |
| cd "$APP_DIR" || exit 1 | |
| # docker-compose.yml 파일 확인 | |
| if [ ! -f "docker-compose.yml" ]; then | |
| echo "❌ docker-compose.yml 파일을 찾을 수 없습니다" | |
| exit 1 | |
| fi | |
| # 롤백 및 버전 관리를 위해 태그 지정 (docker-compose.yml에서 ${TAG}를 쓴다고 가정) | |
| export TAG=$IMAGE_TAG | |
| export DOCKER_IMAGE_NAME=$DOCKER_IMAGE_NAME | |
| # 기존 컨테이너 중지 및 최신 이미지 Pull & 실행 | |
| docker compose pull | |
| if docker compose up -d; then | |
| echo "✅ 컨테이너 재시작 성공" | |
| else | |
| echo "❌ 컨테이너 재시작 실패" | |
| exit 1 | |
| fi |
🧰 Tools
🪛 Shellcheck (0.11.0)
[info] 75-75: Double quote to prevent globbing and word splitting.
(SC2086)
[style] 85-85: Check exit code directly with e.g. 'if mycmd;', not indirectly with $?.
(SC2181)
🤖 Prompt for AI Agents
In @scripts/cd-dev.sh around lines 74 - 90, Ensure variables are quoted and
docker-compose validated: wrap APP_DIR in quotes wherever used (e.g., "cd
\"$APP_DIR\"" and "mkdir -p \"$APP_DIR/config\""), check for the presence of the
docker-compose.yml file in "$APP_DIR" before running docker compose (validate
that the file contains the expected ${TAG}/${DOCKER_IMAGE_NAME} variables or
adjust to the actual compose file), replace the post-command status check "if [
$? -eq 0 ]" with a direct command conditional (e.g., if docker compose up -d;
then ...) and fail fast with descriptive error messages if any validation
(missing file, missing variables, or docker compose failure) detects a problem.
kyeoungwoon
force-pushed
the
feature/#1-cicd
branch
from
8441e23 to
741d0b9
Compare
scripts/cd-dev.sh
Outdated
| docker compose pull | ||
| docker compose up -d |
There was a problem hiding this comment.
P3: 배포 스크립트가 원격 서버의 docker-compose.yml 파일에 의존하고 있지만, 이 파일을 생성하거나 전송하는 단계가 없습니다. 'docker compose up -d' 명령은 실행 경로에 docker-compose.yml이 있어야 하는데, 현재 워크플로우에서는 이를 보장하지 않습니다.
배포 디렉토리($APP_DIR)에 docker-compose.yml 파일을 생성하거나 리포지토리에서 복사하는 단계를 추가해야 합니다.
| elif [[ -n "$INPUT_ENV" ]]; then | ||
| ENVIRONMENT="$INPUT_ENV" | ||
| # CD에서 호출한 경우 branch에 따라서 환경 결정 | ||
| elif [[ "${{ github.ref }}" == "refs/heads/main" ]]; then | ||
| ENVIRONMENT="prod" | ||
| elif [[ "${{ github.ref }}" == "refs/heads/develop" ]]; then | ||
| ENVIRONMENT="dev" | ||
| else | ||
| ENVIRONMENT="test" | ||
| fi |
There was a problem hiding this comment.
P2: 환경 변수 검증 로직에 else 분기가 누락되어 있습니다. 조건문이 elif로만 연결되어 있어, 마지막 elif 조건도 만족하지 않을 경우 ENVIRONMENT 변수가 설정되지 않은 상태로 다음 단계로 진행될 수 있습니다.
마지막 elif를 else로 변경하거나, 조건문 이후에 ENVIRONMENT 변수 검증을 추가해야 합니다.
docker/app/dockerfile
Outdated
| # 환경변수로 힙 메모리 설정 가능 (기본값: dev 환경) | ||
| ENV JAVA_OPTS="-Xms1400m -Xmx1400m" |
There was a problem hiding this comment.
P2: JVM 메모리 설정이 하드코딩되어 있어 환경별 유연성이 떨어집니다. JAVA_OPTS를 ENV로 설정하면 런타임에 변경할 수 없으며, 개발/프로덕션 환경에서 다른 메모리 설정이 필요할 수 있습니다.
ARG를 사용하여 빌드 시점에 설정하거나, docker-compose.yml에서 환경 변수로 오버라이드할 수 있도록 변경하는 것을 권장합니다:
ENV JAVA_OPTS="-Xms1400m -Xmx1400m"
# docker-compose.yml에서 environment로 오버라이드 가능또는 kyeoungwoon dockerfile처럼 MaxRAMPercentage를 사용하여 컨테이너 메모리에 비례하도록 설정하는 것이 더 유연합니다.
| # 환경변수로 힙 메모리 설정 가능 (기본값: dev 환경) | |
| ENV JAVA_OPTS="-Xms1400m -Xmx1400m" | |
| # 기본 JVM 옵션: 컨테이너 메모리에 비례하여 힙 메모리 설정 | |
| ARG JAVA_OPTS="-XX:InitialRAMPercentage=30.0 -XX:MaxRAMPercentage=75.0" | |
| ENV JAVA_OPTS=${JAVA_OPTS} |
| - name: Build and push Docker image | ||
| uses: docker/build-push-action@v6 | ||
| with: | ||
| context: . |
There was a problem hiding this comment.
P3: 두 개의 Dockerfile이 존재하는데 (docker/kyeoungwoon/dockerfile과 docker/app/dockerfile), 목적과 사용처가 명확하지 않습니다.
- kyeoungwoon/dockerfile: CI에서 사용 (eclipse-temurin 기반)
- app/dockerfile: 사용처 불명확 (amazoncorretto 기반)
하나의 Dockerfile만 유지하거나, 각 파일의 목적을 README나 주석으로 명확히 문서화해야 합니다. 또한 CI 워크플로우에서 docker/kyeoungwoon/dockerfile을 사용하는 이유를 설명하는 주석을 추가하는 것이 좋습니다.
| context: . | |
| context: . | |
| # CI용 이미지 빌드를 위해 eclipse-temurin 기반 Dockerfile 사용 | |
| # (amazoncorretto 기반 docker/app/dockerfile은 런타임/기타 용도로 별도 관리) |
docker/app/dockerfile
Outdated
| # curl은 Alpine Linux에 기본 포함됨 | ||
| HEALTHCHECK --interval=30s \ | ||
| --timeout=3s \ | ||
| --start-period=40s \ | ||
| --retries=3 \ | ||
| CMD curl -f http://localhost:8080/actuator/health || exit 1 |
There was a problem hiding this comment.
P2: Health check URL이 /actuator/health로 하드코딩되어 있지만, 실제 애플리케이션에서 해당 엔드포인트가 활성화되어 있는지 확인이 필요합니다. Spring Boot Actuator가 의존성에 포함되어 있지 않으면 health check가 계속 실패하여 컨테이너가 unhealthy 상태로 표시됩니다.
다음 중 하나를 확인해야 합니다:
- build.gradle.kts에 spring-boot-starter-actuator 의존성이 있는지 확인
- 또는 health check를 주석 처리하거나 다른 엔드포인트로 변경
| # curl은 Alpine Linux에 기본 포함됨 | |
| HEALTHCHECK --interval=30s \ | |
| --timeout=3s \ | |
| --start-period=40s \ | |
| --retries=3 \ | |
| CMD curl -f http://localhost:8080/actuator/health || exit 1 | |
| # 주의: 아래 헬스체크는 Spring Boot Actuator의 /actuator/health 엔드포인트가 활성화되어 있어야만 동작합니다. | |
| # - build.gradle.kts에 spring-boot-starter-actuator 의존성이 포함되어 있는지 | |
| # - management.endpoints.web.exposure.include 등에 health 엔드포인트가 노출되어 있는지 | |
| # 를 확인한 뒤, 실제 애플리케이션의 헬스 엔드포인트에 맞게 수정 후 주석을 해제해 사용하세요. | |
| # 예시: | |
| # HEALTHCHECK --interval=30s \ | |
| # --timeout=3s \ | |
| # --start-period=40s \ | |
| # --retries=3 \ | |
| # CMD curl -f http://localhost:8080/actuator/health || exit 1 |
docker/kyeoungwoon/dockerfile
Outdated
| # Optional healthcheck (uncomment if actuator/health endpoint exists) | ||
| # HEALTHCHECK --interval=30s --timeout=5s CMD curl -f http://localhost:8080/actuator/health || exit 1 |
There was a problem hiding this comment.
P3: HEALTHCHECK 주석에 actuator/health 엔드포인트 존재 확인이 필요하다고 명시되어 있는데, build.gradle.kts를 확인한 결과 spring-boot-starter-actuator가 포함되어 있으므로 주석을 해제해도 됩니다.
다만 health check를 활성화하려면 다음을 확인해야 합니다:
- application.yml에서 actuator health 엔드포인트가 노출되어 있는지 확인
- Security 설정에서 /actuator/health가 인증 없이 접근 가능한지 확인
scripts/cd-dev.sh
Outdated
|
|
||
| # [4] Docker Hub 로그인 | ||
| echo "" | ||
| echo "[2] Docker Hub 로그인" |
There was a problem hiding this comment.
P3: 스크립트 제목 번호가 일관되지 않습니다. Docker 설치 확인은 "[1]"로 시작하지만, Docker Hub 로그인은 "[2]"로 표시되어 있습니다. 그러나 실제로는 [3] 설정 파일 생성 단계가 먼저 실행되므로 번호가 순서와 맞지 않습니다.
단계 번호를 실제 실행 순서에 맞게 수정하거나, 번호를 제거하는 것을 권장합니다.
| echo "[2] Docker Hub 로그인" | |
| echo "[4] Docker Hub 로그인" |
scripts/cd-dev.sh
Outdated
| mkdir -p $APP_DIR/config | ||
| echo "$APPLICATION_PROD" > $APP_DIR/config/application-prod.yml | ||
| echo "$APPLICATION_DEV" > $APP_DIR/config/application-dev.yml | ||
| echo "$APPLICATION_SECRET" > $APP_DIR/config/application-secret.yml | ||
|
|
||
| # 보안을 위해 권한 설정 (선택사항) | ||
| chmod 600 $APP_DIR/config/application-*.yml |
There was a problem hiding this comment.
P2: 민감한 설정 파일에 대한 권한 설정이 600으로 되어 있지만, 파일이 생성되는 디렉토리($APP_DIR/config)의 권한은 설정하지 않았습니다. 디렉토리가 공개 권한으로 생성되면 파일 목록이 노출될 수 있습니다.
디렉토리 권한도 함께 설정하는 것을 권장합니다:
mkdir -p $APP_DIR/config
chmod 700 $APP_DIR/config| mkdir -p $APP_DIR/config | |
| echo "$APPLICATION_PROD" > $APP_DIR/config/application-prod.yml | |
| echo "$APPLICATION_DEV" > $APP_DIR/config/application-dev.yml | |
| echo "$APPLICATION_SECRET" > $APP_DIR/config/application-secret.yml | |
| # 보안을 위해 권한 설정 (선택사항) | |
| chmod 600 $APP_DIR/config/application-*.yml | |
| mkdir -p "$APP_DIR/config" | |
| chmod 700 "$APP_DIR/config" | |
| echo "$APPLICATION_PROD" > "$APP_DIR/config/application-prod.yml" | |
| echo "$APPLICATION_DEV" > "$APP_DIR/config/application-dev.yml" | |
| echo "$APPLICATION_SECRET" > "$APP_DIR/config/application-secret.yml" | |
| # 보안을 위해 권한 설정 (선택사항) | |
| chmod 600 "$APP_DIR/config"/application-*.yml |
scripts/cd-dev.sh
Outdated
| if [ $? -eq 0 ]; then | ||
| echo "✅ 컨테이너 재시작 성공" | ||
| else | ||
| echo "❌ 컨테이너 재시작 실패" | ||
| exit 1 | ||
| fi |
There was a problem hiding this comment.
P3: docker compose up -d 실패 시 확인 로직도 불필요합니다. 'set -e'에 의해 명령 실패 시 자동으로 스크립트가 종료되므로, if 조건문이 중복입니다.
간단하게 처리할 수 있습니다:
docker compose pull
docker compose up -d
echo "✅ 컨테이너 재시작 성공"
.github/workflows/cd-dev.yml
Outdated
| script_path: scripts/cd-dev.sh | ||
|
|
There was a problem hiding this comment.
P3: SSH 액션의 script_path 속성은 로컬 파일 경로를 원격 서버로 전송하는 용도입니다. 그러나 현재 구조에서는 scripts/cd-dev.sh 파일이 원격 서버에 존재해야 하는데, 이 파일을 원격 서버로 전송하는 단계가 없습니다.
다음 두 가지 방법 중 하나를 선택해야 합니다:
- script 속성을 사용하여 스크립트 내용을 직접 전달
- 또는 scp/rsync로 스크립트를 먼저 전송한 후 실행
script 속성 사용 예시:
script: |
bash << 'EOF'
$(cat scripts/cd-dev.sh의 내용)
EOF| script_path: scripts/cd-dev.sh | |
| script: | | |
| bash << 'EOF' | |
| # scripts/cd-dev.sh의 내용을 여기에 그대로 붙여넣습니다. | |
| # 예: 기존 scripts/cd-dev.sh 파일의 모든 쉘 명령들 | |
| EOF |
There was a problem hiding this comment.
Actionable comments posted: 5
🤖 Fix all issues with AI agents
In @.github/workflows/cd-dev.yml:
- Around line 65-73: Multiple sequential echo statements appending to
$GITHUB_STEP_SUMMARY are inefficient and trigger shellcheck style warnings;
replace the repeated echo lines with a single here-document that appends the
entire Deployment Summary to $GITHUB_STEP_SUMMARY (use an unquoted heredoc like
cat <<EOF >> $GITHUB_STEP_SUMMARY so environment variables like
${env.ENVIRONMENT} and ${github.sha} expand) to improve readability and reduce
subprocess calls, keeping the same content and ordering as the original echo
lines.
In @scripts/cd-dev.sh:
- Line 56: The mkdir and other calls that use the APP_DIR variable (e.g., the
mkdir -p $APP_DIR/config usages) should quote the variable to prevent
word-splitting and globbing; update every occurrence where $APP_DIR is used in
shell commands (including the other instances flagged) to use "$APP_DIR"/config
or "$APP_DIR" as appropriate so paths with spaces or special characters are
handled safely.
- Around line 70-75: Replace the indirect exit-code check using "$?" after the
docker login command with a direct conditional that runs the command in the if
statement (e.g., change the pattern "if [ $? -eq 0 ]; then ... else ... fi" to
"if docker login ...; then echo '✅ Docker Hub 로그인 성공'; else echo '❌ Docker Hub
로그인 실패'; exit 1; fi"), and apply the same replacement for the other occurrence
that follows the same pattern; ensure you keep the original echo messages and
the exit 1 on failure.
- Around line 56-63: Validate that APPLICATION_SECRET (and other sensitive vars
like APPLICATION_PROD/DEV) are non-empty before writing to disk and fail fast
with an error message if any required secret is missing; write files with
restrictive permissions (use umask or create temporary files then chmod 600) and
ensure you only create the secret file when APPLICATION_SECRET is present; add a
trap that removes $APP_DIR/config/application-*.yml on EXIT (or on ERR/INT) to
delete files after deployment; optionally document switching to Docker secrets
or passing env vars directly so the code paths that write application-secret.yml
can be removed later.
In @src/test/java/com/umc/product/UmcProductApplicationTests.java:
- Around line 8-10: The UmcProductApplicationTests class contains commented-out
test method lines ("// @Test" and "// void contextLoads() { }") which
should be removed; either delete the entire UmcProductApplicationTests class if
no integration test is needed, or restore/implement the test by uncommenting and
providing a real assertion in contextLoads() (or annotate/disable appropriately)
to avoid leaving commented-out code and unnecessary @SpringBootTest-driven
context loading.
📜 Review details
Configuration used: Path: .coderabbit.yaml
Review profile: ASSERTIVE
Plan: Pro
⛔ Files ignored due to path filters (1)
gradle/wrapper/gradle-wrapper.jaris excluded by!**/*.jar
📒 Files selected for processing (4)
.github/workflows/cd-dev.yml.gitignorescripts/cd-dev.shsrc/test/java/com/umc/product/UmcProductApplicationTests.java
🧰 Additional context used
📓 Path-based instructions (2)
**/*.java
📄 CodeRabbit inference engine (.github/copilot-instructions.md)
Package structure must follow hexagonal architecture with domain/, application/{port/in, port/out, service}/, and adapter/{in, out}/ directories
Files:
src/test/java/com/umc/product/UmcProductApplicationTests.java
src/**
⚙️ CodeRabbit configuration file
src/**: 다음 항목들을 꼼꼼하게 검토해줘.
- 예외 처리
- 예외가 적절히 처리되었는지 확인해줘. (try-catch, throws, ExceptionAdvice)
- 공통 예외 처리 모듈(예: GlobalHandler, ApiResponse 등)을 잘 활용했는지 확인.
- RuntimeException을 남발하지 않고, 의미 있는 커스텀 예외를 사용하는지 검토.
- 예외 메시지에 민감 정보(DB 정보, 사용자 정보 등)가 노출되지 않게 했는지 점검.
- 코드 품질 & 가독성
- 메소드/클래스가 단일 책임 원칙(SRP)에 맞게 구성되어 있는지.
- 중복 코드가 있는 경우, 유틸/공통 컴포넌트로 추출 가능한지.
- 의미 있는 변수명과 메소드명을 사용했는지.
- 매직 넘버, 하드코딩된 값이 존재하는지 점검.
- 성능 및 효율성
- 불필요한 DB 쿼리 호출, N+1 문제 가능성이 있는지 확인.
- Stream, loop, recursion 사용 시 시간복잡도/메모리 효율성을 고려했는지.
- 캐시 적용 가능성이 있거나, 과도한 연산이 반복되는 구간이 있는지.
- 트랜잭션 관리
- @transactional이 필요한 메소드에 누락되지 않았는지.
- 읽기 전용 트랜잭션(readOnly = true)을 적절히 사용했는지.
- DB 일관성, 롤백 정책이 올바른지 검토.
- 입력 검증 및 보안
- @Valid, Bean Validation 등을 통한 입력값 검증이 되어 있는지.
- 비밀번호, 토큰 등 민감한 정보가 로깅되지 않는지.
- 테스트
- 단위 테스트가 충분히 작성되었는지, 핵심 로직의 검증이 누락되지 않았는지.
- Mocking을 통한 독립 테스트 구조를 유지했는지.
- 경계값 테스트, 예외 케이스 테스트가 포함되어 있는지.
- 구조 및 설계
- Controller, Service, Repository 등 계층 구조가 올바르게 나뉘어 있는지.
- DTO, Entity, Domain 객체 간 변환 로직이 명확하고 중복되지 않는지.
- Config 클래스에서 Bean 등록이 과도하거나 순환 참조 위험이 없는지.
Files:
src/test/java/com/umc/product/UmcProductApplicationTests.java
🧠 Learnings (1)
📚 Learning: 2026-01-04T08:23:08.581Z
Learnt from: CR
Repo: UMC-PRODUCT/umc-product-server PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-01-04T08:23:08.581Z
Learning: Applies to **/*{application,adapter}/**Test.java : Unit tests must use ExtendWith(MockitoExtension.class), mock all Port/UseCase dependencies with Mock, and use BDD-style given/when/then structure
Applied to files:
src/test/java/com/umc/product/UmcProductApplicationTests.java
🪛 actionlint (1.7.10)
.github/workflows/cd-dev.yml
65-65: shellcheck reported issue in this script: SC2086:info:1:43: Double quote to prevent globbing and word splitting
(shellcheck)
65-65: shellcheck reported issue in this script: SC2086:info:2:12: Double quote to prevent globbing and word splitting
(shellcheck)
65-65: shellcheck reported issue in this script: SC2086:info:3:53: Double quote to prevent globbing and word splitting
(shellcheck)
65-65: shellcheck reported issue in this script: SC2086:info:4:48: Double quote to prevent globbing and word splitting
(shellcheck)
65-65: shellcheck reported issue in this script: SC2086:info:5:43: Double quote to prevent globbing and word splitting
(shellcheck)
65-65: shellcheck reported issue in this script: SC2086:info:6:87: Double quote to prevent globbing and word splitting
(shellcheck)
65-65: shellcheck reported issue in this script: SC2086:info:7:56: Double quote to prevent globbing and word splitting
(shellcheck)
65-65: shellcheck reported issue in this script: SC2086:info:8:43: Double quote to prevent globbing and word splitting
(shellcheck)
65-65: shellcheck reported issue in this script: SC2129:style:1:1: Consider using { cmd1; cmd2; } >> file instead of individual redirects
(shellcheck)
🪛 Shellcheck (0.11.0)
scripts/cd-dev.sh
[info] 56-56: Double quote to prevent globbing and word splitting.
(SC2086)
[info] 57-57: Double quote to prevent globbing and word splitting.
(SC2086)
[info] 58-58: Double quote to prevent globbing and word splitting.
(SC2086)
[info] 59-59: Double quote to prevent globbing and word splitting.
(SC2086)
[info] 62-62: Double quote to prevent globbing and word splitting.
(SC2086)
[style] 70-70: Check exit code directly with e.g. 'if mycmd;', not indirectly with $?.
(SC2181)
[info] 78-78: Double quote to prevent globbing and word splitting.
(SC2086)
[style] 88-88: Check exit code directly with e.g. 'if mycmd;', not indirectly with $?.
(SC2181)
🔇 Additional comments (3)
.gitignore (1)
34-40: Gradle wrapper 제외 규칙이 적절하게 구성되었습니다.CI/CD 파이프라인에서 재현 가능한 빌드를 위해 gradle wrapper를 리포지토리에 포함하는 것이 올바른 접근입니다. 소스 디렉토리 내의 build/out 디렉토리도 적절하게 제외 처리되었습니다.
.github/workflows/cd-dev.yml (2)
50-60: GitHub 리포지토리 Secrets 설정을 확인하세요.워크플로우가 다음 Secrets를 필요로 합니다. 배포 전에 GitHub 리포지토리 설정에서 모든 Secrets가 올바르게 구성되어 있는지 확인하세요:
필수 Secrets:
APPLICATION_PROD- 프로덕션 환경 설정 파일 내용APPLICATION_DEV- 개발 환경 설정 파일 내용APPLICATION_SECRET- 민감한 설정 정보DOCKERHUB_TOKEN- Docker Hub 액세스 토큰DOCKERHUB_USERNAME- Docker Hub 사용자명DOCKER_IMAGE_NAME- Docker 이미지 이름SERVER_SSH_HOST- 배포 서버 호스트SERVER_SSH_USERNAME- SSH 사용자명SERVER_SSH_PRIVATE_KEY- SSH 개인 키SERVER_SSH_PORT- SSH 포트Likely an incorrect or invalid review comment.
60-61: 필수 환경 변수가 누락되었습니다.
cd-dev.sh스크립트가 요구하는 필수 환경 변수들이envs목록에서 누락되어 배포 시 스크립트가 실패할 것입니다:
APP_DIR_PRODUCTION(스크립트 16번 라인에서 필수로 체크)APP_DIR_DEVELOPMENT(스크립트 17번 라인에서 필수로 체크)DOCKER_IMAGE_NAME(스크립트 14번 라인에서 필수로 체크)또한
script_path대신script속성을 사용해야 합니다.🐛 제안 수정사항
- name: SSH 접속 및 스크립트 실행 uses: appleboy/ssh-action@v1 env: APPLICATION_PROD: ${{ secrets.APPLICATION_PROD }} APPLICATION_DEV: ${{ secrets.APPLICATION_DEV }} APPLICATION_SECRET: ${{ secrets.APPLICATION_SECRET }} DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }} DOCKERHUB_USERNAME: ${{ secrets.DOCKERHUB_USERNAME }} + APP_DIR_PRODUCTION: ${{ secrets.APP_DIR_PRODUCTION }} + APP_DIR_DEVELOPMENT: ${{ secrets.APP_DIR_DEVELOPMENT }} + DOCKER_IMAGE_NAME: ${{ secrets.DOCKER_IMAGE_NAME }} with: host: ${{ secrets.SERVER_SSH_HOST }} username: ${{ secrets.SERVER_SSH_USERNAME }} key: ${{ secrets.SERVER_SSH_PRIVATE_KEY }} port: ${{ secrets.SERVER_SSH_PORT }} - envs: APPLICATION_PROD,APPLICATION_DEV,APPLICATION_SECRET,ENVIRONMENT,IMAGE_TAG,REPO_OWNER,DOCKER_IMAGE_NAME,DOCKERHUB_TOKEN,DOCKERHUB_USERNAME - script_path: scripts/cd-dev.sh + envs: APPLICATION_PROD,APPLICATION_DEV,APPLICATION_SECRET,ENVIRONMENT,IMAGE_TAG,REPO_OWNER,DOCKER_IMAGE_NAME,DOCKERHUB_TOKEN,DOCKERHUB_USERNAME,APP_DIR_PRODUCTION,APP_DIR_DEVELOPMENT + script: | + cd $GITHUB_WORKSPACE + bash scripts/cd-dev.sh또는 로컬 스크립트를 원격에 복사하여 실행:
- script_path: scripts/cd-dev.sh + script: | + $(< scripts/cd-dev.sh)Likely an incorrect or invalid review comment.
.github/workflows/cd-dev.yml
Outdated
| run: | | ||
| echo "### Deployment Summary :rocket:" >> $GITHUB_STEP_SUMMARY | ||
| echo "" >> $GITHUB_STEP_SUMMARY | ||
| echo "- **Environment:** ${{ env.ENVIRONMENT }}" >> $GITHUB_STEP_SUMMARY | ||
| echo "- **Branch:** ${{ github.ref_name }}" >> $GITHUB_STEP_SUMMARY | ||
| echo "- **Commit:** ${{ github.sha }}" >> $GITHUB_STEP_SUMMARY | ||
| echo "- **Image:** ${{ secrets.DOCKER_IMAGE_NAME }}:${{ env.ENVIRONMENT }}-latest" >> $GITHUB_STEP_SUMMARY | ||
| echo "- **Server:** ${{ secrets.SERVER_SSH_HOST }}" >> $GITHUB_STEP_SUMMARY | ||
| echo "- **Status:** ${{ job.status }}" >> $GITHUB_STEP_SUMMARY |
There was a problem hiding this comment.
🧹 Nitpick | 🔵 Trivial
Shellcheck 스타일 경고를 개선할 수 있습니다.
Deployment Summary 스크립트에서 여러 개의 echo 명령이 같은 파일로 리다이렉션됩니다. 이를 하나의 블록으로 묶으면 더 효율적이고 가독성이 좋아집니다.
♻️ 제안 수정사항
- name: Deployment Summary
if: always()
run: |
- echo "### Deployment Summary :rocket:" >> $GITHUB_STEP_SUMMARY
- echo "" >> $GITHUB_STEP_SUMMARY
- echo "- **Environment:** ${{ env.ENVIRONMENT }}" >> $GITHUB_STEP_SUMMARY
- echo "- **Branch:** ${{ github.ref_name }}" >> $GITHUB_STEP_SUMMARY
- echo "- **Commit:** ${{ github.sha }}" >> $GITHUB_STEP_SUMMARY
- echo "- **Image:** ${{ secrets.DOCKER_IMAGE_NAME }}:${{ env.ENVIRONMENT }}-latest" >> $GITHUB_STEP_SUMMARY
- echo "- **Server:** ${{ secrets.SERVER_SSH_HOST }}" >> $GITHUB_STEP_SUMMARY
- echo "- **Status:** ${{ job.status }}" >> $GITHUB_STEP_SUMMARY
+ {
+ echo "### Deployment Summary :rocket:"
+ echo ""
+ echo "- **Environment:** ${{ env.ENVIRONMENT }}"
+ echo "- **Branch:** ${{ github.ref_name }}"
+ echo "- **Commit:** ${{ github.sha }}"
+ echo "- **Image:** ${{ secrets.DOCKER_IMAGE_NAME }}:${{ env.ENVIRONMENT }}-latest"
+ echo "- **Server:** ${{ secrets.SERVER_SSH_HOST }}"
+ echo "- **Status:** ${{ job.status }}"
+ } >> "$GITHUB_STEP_SUMMARY"🧰 Tools
🪛 actionlint (1.7.10)
65-65: shellcheck reported issue in this script: SC2086:info:1:43: Double quote to prevent globbing and word splitting
(shellcheck)
65-65: shellcheck reported issue in this script: SC2086:info:2:12: Double quote to prevent globbing and word splitting
(shellcheck)
65-65: shellcheck reported issue in this script: SC2086:info:3:53: Double quote to prevent globbing and word splitting
(shellcheck)
65-65: shellcheck reported issue in this script: SC2086:info:4:48: Double quote to prevent globbing and word splitting
(shellcheck)
65-65: shellcheck reported issue in this script: SC2086:info:5:43: Double quote to prevent globbing and word splitting
(shellcheck)
65-65: shellcheck reported issue in this script: SC2086:info:6:87: Double quote to prevent globbing and word splitting
(shellcheck)
65-65: shellcheck reported issue in this script: SC2086:info:7:56: Double quote to prevent globbing and word splitting
(shellcheck)
65-65: shellcheck reported issue in this script: SC2086:info:8:43: Double quote to prevent globbing and word splitting
(shellcheck)
65-65: shellcheck reported issue in this script: SC2129:style:1:1: Consider using { cmd1; cmd2; } >> file instead of individual redirects
(shellcheck)
🤖 Prompt for AI Agents
In @.github/workflows/cd-dev.yml around lines 65 - 73, Multiple sequential echo
statements appending to $GITHUB_STEP_SUMMARY are inefficient and trigger
shellcheck style warnings; replace the repeated echo lines with a single
here-document that appends the entire Deployment Summary to $GITHUB_STEP_SUMMARY
(use an unquoted heredoc like cat <<EOF >> $GITHUB_STEP_SUMMARY so environment
variables like ${env.ENVIRONMENT} and ${github.sha} expand) to improve
readability and reduce subprocess calls, keeping the same content and ordering
as the original echo lines.
scripts/cd-dev.sh
Outdated
| echo "📂 배포 경로: $APP_DIR" | ||
|
|
||
| # [3] 설정 파일 생성 | ||
| mkdir -p $APP_DIR/config |
There was a problem hiding this comment.
🧹 Nitpick | 🔵 Trivial
Shellcheck 경고: 변수를 인용 부호로 감싸세요.
$APP_DIR 변수가 공백이나 특수문자를 포함할 경우 의도하지 않은 동작이 발생할 수 있습니다. Shellcheck가 지적한 대로 변수를 큰따옴표로 감싸는 것이 안전합니다.
♻️ 제안 수정사항
# [3] 설정 파일 생성
-mkdir -p $APP_DIR/config
-echo "$APPLICATION_PROD" > $APP_DIR/config/application-prod.yml
-echo "$APPLICATION_DEV" > $APP_DIR/config/application-dev.yml
-echo "$APPLICATION_SECRET" > $APP_DIR/config/application-secret.yml
+mkdir -p "$APP_DIR/config"
+echo "$APPLICATION_PROD" > "$APP_DIR/config/application-prod.yml"
+echo "$APPLICATION_DEV" > "$APP_DIR/config/application-dev.yml"
+echo "$APPLICATION_SECRET" > "$APP_DIR/config/application-secret.yml"
# 보안을 위해 권한 설정 (선택사항)
-chmod 600 $APP_DIR/config/application-*.yml
+chmod 600 "$APP_DIR"/config/application-*.yml
echo "✅ 환경 설정 파일 생성 완료" # [5] Docker Compose 실행
-cd $APP_DIR
+cd "$APP_DIR"Also applies to: 62-62, 78-78
🧰 Tools
🪛 Shellcheck (0.11.0)
[info] 56-56: Double quote to prevent globbing and word splitting.
(SC2086)
🤖 Prompt for AI Agents
In @scripts/cd-dev.sh at line 56, The mkdir and other calls that use the APP_DIR
variable (e.g., the mkdir -p $APP_DIR/config usages) should quote the variable
to prevent word-splitting and globbing; update every occurrence where $APP_DIR
is used in shell commands (including the other instances flagged) to use
"$APP_DIR"/config or "$APP_DIR" as appropriate so paths with spaces or special
characters are handled safely.
scripts/cd-dev.sh
Outdated
| mkdir -p $APP_DIR/config | ||
| echo "$APPLICATION_PROD" > $APP_DIR/config/application-prod.yml | ||
| echo "$APPLICATION_DEV" > $APP_DIR/config/application-dev.yml | ||
| echo "$APPLICATION_SECRET" > $APP_DIR/config/application-secret.yml | ||
|
|
||
| # 보안을 위해 권한 설정 (선택사항) | ||
| chmod 600 $APP_DIR/config/application-*.yml | ||
| echo "✅ 환경 설정 파일 생성 완료" |
There was a problem hiding this comment.
민감한 설정 파일의 보안 처리를 강화하세요.
환경 변수의 민감한 정보를 디스크에 기록한 후 권한을 600으로 설정한 것은 좋은 시작이지만, 배포 후에도 이 파일들이 서버에 영구적으로 남아있어 보안 위험이 있습니다. 또한 SECRET 내용이 비어있는지 검증하지 않고 있습니다.
🔒 제안: 보안 강화 방안
- 민감한 정보가 비어있지 않은지 검증 추가:
# [3] 설정 파일 생성
+
+# 민감한 정보 검증
+if [[ -z "$APPLICATION_PROD" || -z "$APPLICATION_DEV" || -z "$APPLICATION_SECRET" ]]; then
+ echo "❌ 설정 파일 내용이 비어있습니다"
+ exit 1
+fi
+
mkdir -p $APP_DIR/config- 또는 Docker secrets나 환경 변수를 직접 컨테이너에 전달하는 방식을 고려:
- Docker Compose의
secrets기능 활용 - 환경 변수를 파일로 저장하지 않고 직접 컨테이너에 전달
- 배포 후 설정 파일을 안전하게 삭제하는 트랩 핸들러 추가
# 스크립트 종료 시 설정 파일 삭제
trap 'rm -f $APP_DIR/config/application-*.yml' EXIT📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| mkdir -p $APP_DIR/config | |
| echo "$APPLICATION_PROD" > $APP_DIR/config/application-prod.yml | |
| echo "$APPLICATION_DEV" > $APP_DIR/config/application-dev.yml | |
| echo "$APPLICATION_SECRET" > $APP_DIR/config/application-secret.yml | |
| # 보안을 위해 권한 설정 (선택사항) | |
| chmod 600 $APP_DIR/config/application-*.yml | |
| echo "✅ 환경 설정 파일 생성 완료" | |
| # 민감한 정보 검증 | |
| if [[ -z "$APPLICATION_PROD" || -z "$APPLICATION_DEV" || -z "$APPLICATION_SECRET" ]]; then | |
| echo "❌ 설정 파일 내용이 비어있습니다" | |
| exit 1 | |
| fi | |
| mkdir -p "$APP_DIR/config" | |
| echo "$APPLICATION_PROD" > "$APP_DIR/config/application-prod.yml" | |
| echo "$APPLICATION_DEV" > "$APP_DIR/config/application-dev.yml" | |
| echo "$APPLICATION_SECRET" > "$APP_DIR/config/application-secret.yml" | |
| # 보안을 위해 권한 설정 (선택사항) | |
| chmod 600 "$APP_DIR/config/application-*.yml" | |
| echo "✅ 환경 설정 파일 생성 완료" |
🧰 Tools
🪛 Shellcheck (0.11.0)
[info] 56-56: Double quote to prevent globbing and word splitting.
(SC2086)
[info] 57-57: Double quote to prevent globbing and word splitting.
(SC2086)
[info] 58-58: Double quote to prevent globbing and word splitting.
(SC2086)
[info] 59-59: Double quote to prevent globbing and word splitting.
(SC2086)
[info] 62-62: Double quote to prevent globbing and word splitting.
(SC2086)
🤖 Prompt for AI Agents
In @scripts/cd-dev.sh around lines 56 - 63, Validate that APPLICATION_SECRET
(and other sensitive vars like APPLICATION_PROD/DEV) are non-empty before
writing to disk and fail fast with an error message if any required secret is
missing; write files with restrictive permissions (use umask or create temporary
files then chmod 600) and ensure you only create the secret file when
APPLICATION_SECRET is present; add a trap that removes
$APP_DIR/config/application-*.yml on EXIT (or on ERR/INT) to delete files after
deployment; optionally document switching to Docker secrets or passing env vars
directly so the code paths that write application-secret.yml can be removed
later.
scripts/cd-dev.sh
Outdated
| if [ $? -eq 0 ]; then | ||
| echo "✅ Docker Hub 로그인 성공" | ||
| else | ||
| echo "❌ Docker Hub 로그인 실패" | ||
| exit 1 | ||
| fi |
There was a problem hiding this comment.
🧹 Nitpick | 🔵 Trivial
스타일 개선: 종료 코드 확인 방식을 직접적으로 변경하세요.
$?를 사용하여 간접적으로 종료 코드를 확인하는 대신, 명령을 직접 if 조건에서 실행하는 것이 더 명확하고 관용적입니다.
♻️ 제안 수정사항
# [4] Docker Hub 로그인
echo ""
echo "[2] Docker Hub 로그인"
-echo "$DOCKERHUB_TOKEN" | docker login -u "$DOCKERHUB_USERNAME" --password-stdin
-
-if [ $? -eq 0 ]; then
+if echo "$DOCKERHUB_TOKEN" | docker login -u "$DOCKERHUB_USERNAME" --password-stdin; then
echo "✅ Docker Hub 로그인 성공"
else
echo "❌ Docker Hub 로그인 실패"
exit 1
fi # 기존 컨테이너 중지 및 최신 이미지 Pull & 실행
docker compose pull
-docker compose up -d
-
-if [ $? -eq 0 ]; then
+if docker compose up -d; then
echo "✅ 컨테이너 재시작 성공"
else
echo "❌ 컨테이너 재시작 실패"
exit 1
fiAlso applies to: 88-93
🧰 Tools
🪛 Shellcheck (0.11.0)
[style] 70-70: Check exit code directly with e.g. 'if mycmd;', not indirectly with $?.
(SC2181)
🤖 Prompt for AI Agents
In @scripts/cd-dev.sh around lines 70 - 75, Replace the indirect exit-code check
using "$?" after the docker login command with a direct conditional that runs
the command in the if statement (e.g., change the pattern "if [ $? -eq 0 ]; then
... else ... fi" to "if docker login ...; then echo '✅ Docker Hub 로그인 성공'; else
echo '❌ Docker Hub 로그인 실패'; exit 1; fi"), and apply the same replacement for the
other occurrence that follows the same pattern; ensure you keep the original
echo messages and the exit 1 on failure.
| // @Test | ||
| // void contextLoads() { | ||
| // } |
There was a problem hiding this comment.
주석 처리된 테스트 코드를 제거하세요.
주석 처리된 코드를 남기는 것은 좋지 않은 관행입니다. 테스트가 필요 없다면 완전히 제거하거나, 필요하다면 수정하여 활성화해야 합니다. 또한 현재 테스트 클래스에 실행 가능한 테스트 메서드가 없어도 @SpringBootTest로 인해 Spring 컨텍스트가 불필요하게 로드됩니다.
♻️ 제안: 불필요한 테스트 클래스 제거
-package com.umc.product;
-
-import org.springframework.boot.test.context.SpringBootTest;
-
-@SpringBootTest
-class UmcProductApplicationTests {
-
-// @Test
-// void contextLoads() {
-// }
-}또는 실제로 컨텍스트 로드 테스트가 필요하다면:
package com.umc.product;
+import org.junit.jupiter.api.Test;
import org.springframework.boot.test.context.SpringBootTest;
@SpringBootTest
class UmcProductApplicationTests {
-// @Test
-// void contextLoads() {
-// }
+ @Test
+ void contextLoads() {
+ // Spring 컨텍스트가 정상적으로 로드되는지 확인
+ }
}Committable suggestion skipped: line range outside the PR's diff.
🤖 Prompt for AI Agents
In @src/test/java/com/umc/product/UmcProductApplicationTests.java around lines 8
- 10, The UmcProductApplicationTests class contains commented-out test method
lines ("// @Test" and "// void contextLoads() { }") which should be
removed; either delete the entire UmcProductApplicationTests class if no
integration test is needed, or restore/implement the test by uncommenting and
providing a real assertion in contextLoads() (or annotate/disable appropriately)
to avoid leaving commented-out code and unnecessary @SpringBootTest-driven
context loading.
There was a problem hiding this comment.
Actionable comments posted: 8
🤖 Fix all issues with AI agents
In @.dockerignore:
- Around line 25-26: The .dockerignore currently excludes the parent "build"
directory which prevents negation patterns like "!build/libs" and
"!build/libs/*.jar" from working; fix it by re-including the parent before the
child negations—add a negation for the parent directory (e.g., "!build") so that
the existing "!build/libs" and "!build/libs/*.jar" entries will take effect and
JARs under build/libs will be included in the Docker context.
In @.github/workflows/ci.yml:
- Around line 183-190: The Build Summary step in the create-manifest job is
referencing steps.set-env.outputs.environment and
steps.set-env.outputs.image_tag which belong to the set-env step inside the
build-and-test job; change the references to use the producing job's outputs
(e.g., needs.build-and-test.outputs.environment and
needs.build-and-test.outputs.image_tag) or expose those values as job-level
outputs from build-and-test and consume them via needs.build-and-test.outputs in
the create-manifest job so the Build Summary step can access the environment and
image_tag correctly.
- Around line 55-62: Remove the unused commented-out matrix strategy block (the
lines containing "strategy:", "matrix:", and the platform/tag-suffix include
entries) from the GitHub Actions workflow to keep the CI file clean—delete the
entire commented block rather than leaving it in place since Git history
preserves the previous version.
- Around line 141-151: 현재 "Build and push Docker image" step(uses:
docker/build-push-action@v6)이 platforms 파라미터를 지정하지 않아 단일 아키텍처만 빌드되고, 이후의
create-manifest job에서 참조하는 -amd64/-arm64 태그와 불일치해 실패하게 됩니다; 수정 방법은 해당 step에
platforms: "linux/amd64,linux/arm64" 를 추가하여 멀티 아키텍처 이미지를 빌드·푸시하도록 하고(또는 멀티아키텍처가
필요 없다면 create-manifest job을 제거하고 태그에서 플랫폼 접미사를 제거) docker/build-push-action@v6의
사용을 유지하면서 멀티아키텍처 빌드를 활성화하세요.
In @docker/app/dockerfile:
- Around line 7-12: Pin the curl package version in the RUN apk add command
(e.g., apk add --no-cache curl=<VERSION>) to ensure reproducible builds and
remove the duplicate /app/logs creation by deleting the later mkdir -p /app/logs
(the second occurrence); keep a single mkdir -p /app/logs and its chown -R
spring:spring in the RUN block that also creates the spring user/group (the RUN
line containing apk add, addgroup -S spring, adduser -S spring -G spring, mkdir
-p /app/logs, chown -R spring:spring), and replace <VERSION> with the
appropriate Alpine curl package version found via apk search.
- Around line 40-41: Uncomment and enable the Docker HEALTHCHECK by activating
the existing HEALTHCHECK instruction that pings the Spring Boot Actuator
endpoint (e.g., "HEALTHCHECK --interval=30s --timeout=5s CMD curl -f
http://localhost:8080/actuator/health || exit 1") so the container reports
health status; ensure the Actuator endpoint is exposed and curl remains
installed in the image.
- Around line 14-16: The COPY in the Dockerfile uses a wildcard
(build/libs/*.jar) which can fail when multiple jars exist; either disable the
plain jar in Gradle by adding tasks.named('jar') { enabled = false } to
build.gradle so only the bootJar exists, or change the Dockerfile COPY to target
the boot jar explicitly (e.g., COPY --chown=spring:spring build/libs/*-boot.jar
app.jar or use the exact artifact name) and keep the existing RUN chmod line;
apply one of these fixes to prevent multi-match failures.
📜 Review details
Configuration used: Path: .coderabbit.yaml
Review profile: ASSERTIVE
Plan: Pro
📒 Files selected for processing (3)
.dockerignore.github/workflows/ci.ymldocker/app/dockerfile
🧰 Additional context used
🪛 actionlint (1.7.10)
.github/workflows/ci.yml
185-185: property "set-env" is not defined in object type {}
(expression)
🪛 Checkov (3.2.334)
docker/app/dockerfile
[low] 1-41: Ensure that HEALTHCHECK instructions have been added to container images
(CKV_DOCKER_2)
🪛 Hadolint (2.14.0)
docker/app/dockerfile
[warning] 8-8: Pin versions in apk add. Instead of apk add <package> use apk add <package>=<version>
(DL3018)
🪛 YAMLlint (1.37.1)
.github/workflows/ci.yml
[warning] 3-3: truthy value should be one of [false, true]
(truthy)
[error] 155-155: too many spaces inside brackets
(brackets)
[error] 155-155: too many spaces inside brackets
(brackets)
🔇 Additional comments (5)
.dockerignore (1)
23-23: 와일드카드 패턴으로의 정리는 좋으나 의도 확인 필요23번째 줄의
**/application-*.yml패턴은 18-22번째의 명시적 패턴들을 간결하게 정리합니다. 다만 이 패턴이application.yml(접미사 없음)도 제외하려는지 확인이 필요합니다.현재 코드:
- Line 18:
**/application.yml(명시적으로 제외)- Line 23:
**/application-*.yml(하이픈 포함한 파일만 매칭)
application.yml이 CI/CD 빌드 프로세스에서 필요하다면 현재 설정이 올바릅니다. 그렇지 않으면 line 18을 제거하고 23번 패턴만 사용해야 합니다.docker/app/dockerfile (2)
1-6: LGTM! 적절한 베이스 이미지 선택Amazon Corretto 21 Alpine을 사용한 것은 Spring Boot 애플리케이션에 적합한 선택입니다. 라벨도 명확하게 작성되었습니다.
27-35: JVM OOM 처리 정책 확인 필요Line 31의
-XX:+ExitOnOutOfMemoryError와 Line 32의-XX:+HeapDumpOnOutOfMemoryError가 동시에 설정되어 있습니다.
ExitOnOutOfMemoryError는 OOM 발생 시 즉시 JVM을 종료시키므로, 힙 덤프가 완전히 생성되기 전에 프로세스가 종료될 수 있습니다. 또한 Kubernetes 등의 오케스트레이션 환경에서는 즉시 재시작되어 문제를 진단하기 어려울 수 있습니다.다음 중 하나를 고려해보세요:
- 프로덕션 환경에서 디버깅이 중요하다면
ExitOnOutOfMemoryError제거- 빠른 장애 복구가 중요하다면
HeapDumpOnOutOfMemoryError제거- 둘 다 필요하다면 현재 설정 유지
팀의 운영 정책과 모니터링 전략에 따라 결정하시기 바랍니다.
.github/workflows/ci.yml (2)
1-39: LGTM! 워크플로우 트리거 및 동시성 제어 적절워크플로우 트리거 설정과
workflow_call인터페이스가 잘 구성되어 있습니다. 동시성 제어로 리소스 낭비를 방지하는 것도 좋은 접근입니다.
68-96: 조건문 구문 오류 수정 필요Line 77-79의 조건문 구조에 문제가 있습니다. Line 79에서
elif문이 끝나고 다음 조건으로 넘어가는데, 구문이 올바르지 않습니다.🐛 제안하는 수정사항
if [[ "${{ github.event_name }}" == "pull_request" ]]; then echo "Running in PR mode - Setting test environment for build" ENVIRONMENT="test" elif [[ -n "$INPUT_ENV" ]]; then ENVIRONMENT="$INPUT_ENV" - - # CD에서 호출한 경우 branch에 따라서 환경 결정 + # CD에서 호출한 경우 branch에 따라서 환경 결정 elif [[ "${{ github.ref }}" == "refs/heads/main" ]]; then ENVIRONMENT="prod" elif [[ "${{ github.ref }}" == "refs/heads/develop" ]]; then ENVIRONMENT="dev" else ENVIRONMENT="test" fiLikely an incorrect or invalid review comment.
| # curl 설치 (헬스체크용) + non-root 유저 생성 | ||
| RUN apk add --no-cache curl && \ | ||
| addgroup -S spring && \ | ||
| adduser -S spring -G spring && \ | ||
| mkdir -p /app/logs && \ | ||
| chown -R spring:spring /app |
There was a problem hiding this comment.
curl 버전을 고정하고 중복 디렉토리 생성 제거 필요
이 섹션에는 두 가지 개선이 필요합니다:
- Line 8에서
curl패키지 버전을 고정하지 않았습니다. 재현 가능한 빌드를 위해 버전을 명시해야 합니다. - Line 11에서
/app/logs디렉토리를 생성했지만, Line 19에서 동일한 작업을 다시 수행합니다.
🔧 제안하는 수정사항
-RUN apk add --no-cache curl && \
+RUN apk add --no-cache curl=8.5.0-r0 && \
addgroup -S spring && \
adduser -S spring -G spring && \
mkdir -p /app/logs && \
chown -R spring:spring /app그리고 Line 18-19를 제거하세요 (중복):
-# 로그 디렉토리 생성 및 권한 설정
-RUN mkdir -p /app/logs && chown -R spring:spring /app/logs참고: curl 버전은 Alpine 버전에 따라 다를 수 있으므로, apk search curl로 사용 가능한 버전을 확인하세요.
📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| # curl 설치 (헬스체크용) + non-root 유저 생성 | |
| RUN apk add --no-cache curl && \ | |
| addgroup -S spring && \ | |
| adduser -S spring -G spring && \ | |
| mkdir -p /app/logs && \ | |
| chown -R spring:spring /app | |
| # curl 설치 (헬스체크용) + non-root 유저 생성 | |
| RUN apk add --no-cache curl=8.5.0-r0 && \ | |
| addgroup -S spring && \ | |
| adduser -S spring -G spring && \ | |
| mkdir -p /app/logs && \ | |
| chown -R spring:spring /app |
🧰 Tools
🪛 Hadolint (2.14.0)
[warning] 8-8: Pin versions in apk add. Instead of apk add <package> use apk add <package>=<version>
(DL3018)
🤖 Prompt for AI Agents
In @docker/app/dockerfile around lines 7 - 12, Pin the curl package version in
the RUN apk add command (e.g., apk add --no-cache curl=<VERSION>) to ensure
reproducible builds and remove the duplicate /app/logs creation by deleting the
later mkdir -p /app/logs (the second occurrence); keep a single mkdir -p
/app/logs and its chown -R spring:spring in the RUN block that also creates the
spring user/group (the RUN line containing apk add, addgroup -S spring, adduser
-S spring -G spring, mkdir -p /app/logs, chown -R spring:spring), and replace
<VERSION> with the appropriate Alpine curl package version found via apk search.
| # 이미 build된 jar 파일을 docker 안으로 복사 | ||
| COPY --chown=spring:spring build/libs/*.jar app.jar | ||
| RUN chmod 444 app.jar |
There was a problem hiding this comment.
와일드카드 사용으로 인한 빌드 실패 가능성
Line 15의 build/libs/*.jar 와일드카드는 여러 JAR 파일이 존재할 경우 Docker 빌드가 실패합니다. Spring Boot Gradle 프로젝트는 bootJar 태스크 외에도 일반 jar 태스크가 실행될 수 있어 app-plain.jar와 app.jar가 동시에 생성될 수 있습니다.
🔧 제안하는 수정사항
옵션 1: Gradle에서 plain JAR 생성 비활성화 (권장)
build.gradle에 추가:
tasks.named('jar') {
enabled = false
}옵션 2: Dockerfile에서 명시적으로 bootJar 파일만 복사
-COPY --chown=spring:spring build/libs/*.jar app.jar
+COPY --chown=spring:spring build/libs/*[!plain].jar app.jar또는 프로젝트명을 사용:
-COPY --chown=spring:spring build/libs/*.jar app.jar
+COPY --chown=spring:spring build/libs/umc-product-server-*.jar app.jarCommittable suggestion skipped: line range outside the PR's diff.
🤖 Prompt for AI Agents
In @docker/app/dockerfile around lines 14 - 16, The COPY in the Dockerfile uses
a wildcard (build/libs/*.jar) which can fail when multiple jars exist; either
disable the plain jar in Gradle by adding tasks.named('jar') { enabled = false }
to build.gradle so only the bootJar exists, or change the Dockerfile COPY to
target the boot jar explicitly (e.g., COPY --chown=spring:spring
build/libs/*-boot.jar app.jar or use the exact artifact name) and keep the
existing RUN chmod line; apply one of these fixes to prevent multi-match
failures.
| # Optional healthcheck (uncomment if actuator/health endpoint exists) | ||
| # HEALTHCHECK --interval=30s --timeout=5s CMD curl -f http://localhost:8080/actuator/health || exit 1 |
There was a problem hiding this comment.
🧩 Analysis chain
🏁 Script executed:
find . -type f -name "dockerfile" -o -name "Dockerfile" | head -20Repository: UMC-PRODUCT/umc-product-server
Length of output: 121
🏁 Script executed:
find . -type f \( -name "pom.xml" -o -name "build.gradle" -o -name "build.gradle.kts" \) | head -10Repository: UMC-PRODUCT/umc-product-server
Length of output: 92
🏁 Script executed:
git ls-files | grep -E "(docker|Dockerfile)" | head -20Repository: UMC-PRODUCT/umc-product-server
Length of output: 150
🏁 Script executed:
cat build.gradle.ktsRepository: UMC-PRODUCT/umc-product-server
Length of output: 4848
🏁 Script executed:
cat docker/app/dockerfileRepository: UMC-PRODUCT/umc-product-server
Length of output: 1383
헬스체크 활성화 필요
Spring Boot Actuator가 프로젝트에 포함되어 있고, curl도 이미 설치되어 있으므로 헬스체크를 활성화하세요.
-# Optional healthcheck (uncomment if actuator/health endpoint exists)
-# HEALTHCHECK --interval=30s --timeout=5s CMD curl -f http://localhost:8080/actuator/health || exit 1
+HEALTHCHECK --interval=30s --timeout=5s CMD curl -f http://localhost:8080/actuator/health || exit 1📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| # Optional healthcheck (uncomment if actuator/health endpoint exists) | |
| # HEALTHCHECK --interval=30s --timeout=5s CMD curl -f http://localhost:8080/actuator/health || exit 1 | |
| HEALTHCHECK --interval=30s --timeout=5s CMD curl -f http://localhost:8080/actuator/health || exit 1 |
🧰 Tools
🪛 Checkov (3.2.334)
[low] 1-41: Ensure that HEALTHCHECK instructions have been added to container images
(CKV_DOCKER_2)
🤖 Prompt for AI Agents
In @docker/app/dockerfile around lines 40 - 41, Uncomment and enable the Docker
HEALTHCHECK by activating the existing HEALTHCHECK instruction that pings the
Spring Boot Actuator endpoint (e.g., "HEALTHCHECK --interval=30s --timeout=5s
CMD curl -f http://localhost:8080/actuator/health || exit 1") so the container
reports health status; ensure the Actuator endpoint is exposed and curl remains
installed in the image.
There was a problem hiding this comment.
Actionable comments posted: 4
🤖 Fix all issues with AI agents
In @.github/workflows/ci.yml:
- Line 156: The YAML has unnecessary spaces inside the flow sequence for the
needs key; update the needs declaration (the needs: [ build-and-test ] entry) to
remove the spaces inside the brackets so it follows YAML style (e.g., needs:
[build-and-test]) or switch to a block sequence (needs: - build-and-test) to
satisfy the linter and static analysis tools.
- Around line 184-191: The Build Summary step is referencing nonexistent step
outputs (steps.set-env.outputs.environment and steps.set-env.outputs.image_tag);
update the echo lines in the Build Summary step to use the outputs from the
build-and-test job instead (needs.build-and-test.outputs.environment and
needs.build-and-test.outputs.image_tag), and ensure the create-manifest job
declares needs: build-and-test so those job outputs are available.
- Around line 55-62: Remove the commented-out matrix strategy block in
.github/workflows/ci.yml (the commented lines containing "strategy:", "matrix:",
"platform:", and "tag-suffix:") so the file no longer contains dead/commented
multi-platform matrix configuration; simply delete those commented lines to
avoid confusion and keep the workflow focused on the current multi-platform
build approach.
📜 Review details
Configuration used: Path: .coderabbit.yaml
Review profile: ASSERTIVE
Plan: Pro
📒 Files selected for processing (1)
.github/workflows/ci.yml
🧰 Additional context used
🪛 actionlint (1.7.10)
.github/workflows/ci.yml
186-186: property "set-env" is not defined in object type {}
(expression)
🪛 YAMLlint (1.37.1)
.github/workflows/ci.yml
[warning] 3-3: truthy value should be one of [false, true]
(truthy)
[error] 156-156: too many spaces inside brackets
(brackets)
[error] 156-156: too many spaces inside brackets
(brackets)
⏰ Context from checks skipped due to timeout of 90000ms. You can increase the timeout in your CodeRabbit configuration to a maximum of 15 minutes (900000ms). (1)
- GitHub Check: build-and-test
🔇 Additional comments (3)
.github/workflows/ci.yml (3)
1-38: 워크플로우 구조가 잘 설계되었습니다.재사용 가능한 워크플로우(
workflow_call)로 설계되어 CD 파이프라인에서 활용할 수 있도록 outputs를 제공하고, concurrency 제어로 중복 실행을 방지하는 등 전반적인 구조가 적절합니다.
68-96: 환경 결정 로직이 적절하게 구현되었습니다.PR, 수동 입력, 브랜치별로 환경을 올바르게 결정하고, Docker Hub를 위해 repository owner를 소문자로 변환하며, 커밋 해시를 포함한 이미지 태그를 생성하는 로직이 잘 구현되어 있습니다.
98-153: 빌드 및 테스트 프로세스가 잘 구성되었습니다.JDK 설정, Gradle 빌드, 테스트 실행 및 결과 게시, 멀티 플랫폼 Docker 이미지 빌드까지 전체 파이프라인이 적절하게 구현되어 있습니다.
docker/build-push-action의platforms파라미터를 사용하여 멀티 아키텍처 이미지를 효율적으로 빌드하는 방식이 현대적인 모범 사례를 따르고 있습니다.
| # strategy: | ||
| # matrix: | ||
| # platform: [ linux/amd64, linux/arm64 ] | ||
| # include: | ||
| # - platform: linux/amd64 | ||
| # tag-suffix: amd64 | ||
| # - platform: linux/arm64 | ||
| # tag-suffix: arm64 |
There was a problem hiding this comment.
🧹 Nitpick | 🔵 Trivial
주석 처리된 matrix 전략 코드를 제거하세요.
더 이상 사용하지 않는 matrix 전략 코드가 주석으로 남아있습니다. 혼란을 방지하기 위해 제거하는 것이 좋습니다. 현재의 멀티 플랫폼 빌드 방식이 더 효율적이고 적절합니다.
♻️ 제거 권장
- # strategy:
- # matrix:
- # platform: [ linux/amd64, linux/arm64 ]
- # include:
- # - platform: linux/amd64
- # tag-suffix: amd64
- # - platform: linux/arm64
- # tag-suffix: arm64
-
steps:📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| # strategy: | |
| # matrix: | |
| # platform: [ linux/amd64, linux/arm64 ] | |
| # include: | |
| # - platform: linux/amd64 | |
| # tag-suffix: amd64 | |
| # - platform: linux/arm64 | |
| # tag-suffix: arm64 | |
| steps: |
🤖 Prompt for AI Agents
In @.github/workflows/ci.yml around lines 55 - 62, Remove the commented-out
matrix strategy block in .github/workflows/ci.yml (the commented lines
containing "strategy:", "matrix:", "platform:", and "tag-suffix:") so the file
no longer contains dead/commented multi-platform matrix configuration; simply
delete those commented lines to avoid confusion and keep the workflow focused on
the current multi-platform build approach.
| - name: Build Summary | ||
| if: always() | ||
| run: | | ||
| echo "### Build Summary :package:" >> $GITHUB_STEP_SUMMARY | ||
| echo "" >> $GITHUB_STEP_SUMMARY | ||
| echo "- **Environment:** ${{ steps.set-env.outputs.environment }}" >> $GITHUB_STEP_SUMMARY | ||
| echo "- **Image Tag:** ${{ steps.set-env.outputs.image_tag }}" >> $GITHUB_STEP_SUMMARY | ||
| echo "- **Platforms:** linux/amd64, linux/arm64" >> $GITHUB_STEP_SUMMARY |
There was a problem hiding this comment.
Build Summary 단계에서 존재하지 않는 step 출력을 참조하고 있습니다.
steps.set-env.outputs를 참조하고 있지만, create-manifest 잡에는 set-env라는 id를 가진 step이 없습니다. build-and-test 잡의 출력을 참조해야 합니다.
🔧 수정 방법 (create-manifest 잡을 유지하는 경우)
- name: Build Summary
if: always()
run: |
echo "### Build Summary :package:" >> $GITHUB_STEP_SUMMARY
echo "" >> $GITHUB_STEP_SUMMARY
- echo "- **Environment:** ${{ steps.set-env.outputs.environment }}" >> $GITHUB_STEP_SUMMARY
- echo "- **Image Tag:** ${{ steps.set-env.outputs.image_tag }}" >> $GITHUB_STEP_SUMMARY
+ echo "- **Environment:** ${{ needs.build-and-test.outputs.environment }}" >> $GITHUB_STEP_SUMMARY
+ echo "- **Image Tag:** ${{ needs.build-and-test.outputs.image_tag }}" >> $GITHUB_STEP_SUMMARY
echo "- **Platforms:** linux/amd64, linux/arm64" >> $GITHUB_STEP_SUMMARYStatic analysis 도구의 지적사항을 기반으로 함.
📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| - name: Build Summary | |
| if: always() | |
| run: | | |
| echo "### Build Summary :package:" >> $GITHUB_STEP_SUMMARY | |
| echo "" >> $GITHUB_STEP_SUMMARY | |
| echo "- **Environment:** ${{ steps.set-env.outputs.environment }}" >> $GITHUB_STEP_SUMMARY | |
| echo "- **Image Tag:** ${{ steps.set-env.outputs.image_tag }}" >> $GITHUB_STEP_SUMMARY | |
| echo "- **Platforms:** linux/amd64, linux/arm64" >> $GITHUB_STEP_SUMMARY | |
| - name: Build Summary | |
| if: always() | |
| run: | | |
| echo "### Build Summary :package:" >> $GITHUB_STEP_SUMMARY | |
| echo "" >> $GITHUB_STEP_SUMMARY | |
| echo "- **Environment:** ${{ needs.build-and-test.outputs.environment }}" >> $GITHUB_STEP_SUMMARY | |
| echo "- **Image Tag:** ${{ needs.build-and-test.outputs.image_tag }}" >> $GITHUB_STEP_SUMMARY | |
| echo "- **Platforms:** linux/amd64, linux/arm64" >> $GITHUB_STEP_SUMMARY |
🧰 Tools
🪛 actionlint (1.7.10)
186-186: property "set-env" is not defined in object type {}
(expression)
🤖 Prompt for AI Agents
In @.github/workflows/ci.yml around lines 184 - 191, The Build Summary step is
referencing nonexistent step outputs (steps.set-env.outputs.environment and
steps.set-env.outputs.image_tag); update the echo lines in the Build Summary
step to use the outputs from the build-and-test job instead
(needs.build-and-test.outputs.environment and
needs.build-and-test.outputs.image_tag), and ensure the create-manifest job
declares needs: build-and-test so those job outputs are available.
There was a problem hiding this comment.
Actionable comments posted: 3
🤖 Fix all issues with AI agents
In @.github/workflows/cd.yml:
- Around line 187-216: Add an image-cleanup step after the successful `docker
compose up -d --remove-orphans` run: after verifying the compose up exit status
and success messages, invoke `docker image prune -f` (or `docker system prune
-f` if you want to clean unused volumes/networks as well) to remove
dangling/unreferenced images and reclaim disk space; ensure this runs only on
successful deploys and that its output is logged so any reclaiming errors are
visible.
- Around line 8-12: The workflow's paths filter lists 'cd.yml' but the 'paths:'
entry must match the workflow file location; update the 'paths:' section to
replace the 'cd.yml' entry with the correct relative path to this workflow file
so the filter matches the actual workflow filename and location (i.e., edit the
'paths:' block in the cd.yml workflow and change the 'cd.yml' entry to the
workflow's real path).
- Around line 174-179: Limit permissions on the generated Spring Boot secret
files by creating them with a restrictive umask or by explicitly setting their
mode to owner-read/write only; specifically, when writing application-secret.yml
and application-${ENVIRONMENT}.yml (the echo ... > lines), either set umask 077
before creation or run a chmod 600 on those two filenames immediately after
they're written so only the file owner can read/write the secrets.
📜 Review details
Configuration used: Path: .coderabbit.yaml
Review profile: ASSERTIVE
Plan: Pro
📒 Files selected for processing (9)
.github/workflows/cd.yml.github/workflows/ci.ymldocker/app/docker-compose.ymlscripts/application_start-dev.shscripts/application_stop-dev.shscripts/application_stop-prod.shscripts/before_block_traffic.shscripts/before_install.shscripts/validate_service.sh
💤 Files with no reviewable changes (6)
- scripts/application_stop-dev.sh
- scripts/application_start-dev.sh
- scripts/before_install.sh
- scripts/validate_service.sh
- scripts/before_block_traffic.sh
- scripts/application_stop-prod.sh
🧰 Additional context used
🪛 YAMLlint (1.37.1)
docker/app/docker-compose.yml
[error] 19-19: too many spaces inside brackets
(brackets)
[error] 19-19: too many spaces inside brackets
(brackets)
🔇 Additional comments (9)
docker/app/docker-compose.yml (3)
18-23: Healthcheck에서 curl 사용 시 컨테이너 이미지 확인 필요Healthcheck가
curl을 사용하고 있습니다. Alpine 기반 JRE 이미지에는 기본적으로 curl이 포함되어 있지 않을 수 있습니다. Dockerfile에서 curl이 설치되어 있는지 확인하거나,wget사용을 고려해 주세요.또한 정적 분석 도구에서 Line 19의 bracket 내부 공백 문제를 지적하고 있습니다.
🔧 YAML 포맷팅 수정 제안
healthcheck: - test: [ "CMD", "curl", "-sf", "http://localhost:${MANAGEMENT_PORT:-9090}/actuator/health" ] + test: ["CMD", "curl", "-sf", "http://localhost:${MANAGEMENT_PORT:-9090}/actuator/health"] interval: 30s timeout: 10s retries: 3 start_period: 60s
14-17: Volume 경로의 환경 변수 의존성 확인 필요Line 16에서
${SPRING_PROFILES_ACTIVE}를 volume 경로에 사용하고 있습니다. Docker Compose는.env파일에서 이 변수를 읽어오는데, 만약 해당 변수가 설정되지 않으면 빈 문자열로 대체되어application-.yml파일을 마운트하려고 시도할 수 있습니다.
.env파일에 반드시SPRING_PROFILES_ACTIVE가 포함되어야 함을 문서화하거나, fallback 값을 고려해 주세요.
1-11: 서비스 설정 LGTM환경 변수를 통한 유연한 설정, 적절한 재시작 정책(
unless-stopped), 그리고 기본 포트값이 잘 구성되어 있습니다..github/workflows/cd.yml (2)
45-89: 환경 변수 검증 로직 LGTM필수 환경 변수와 시크릿을 체계적으로 검증하고, 누락된 항목을 명확하게 리포트하는 좋은 패턴입니다.
254-281: Test 환경 스킵 처리 LGTMTest 환경에서 배포를 건너뛰면서 명확한 알림과 요약을 제공하는 좋은 패턴입니다.
.github/workflows/ci.yml (4)
111-122: 테스트 실패 시 빌드/푸시 방지 확인현재 워크플로우에서 테스트가 실패하면 후속 단계(Build JAR, Docker push)가 실행되지 않습니다. 이는 올바른 동작이지만, 명시적으로
if: success()조건을 추가하면 의도가 더 명확해집니다.
141-152: PR(Test 환경)에서도 이미지가 푸시됨 - 의도된 동작인지 확인현재 PR 빌드(test 환경)에서도 Docker 이미지가 Docker Hub에 푸시됩니다. 이것이 의도된 동작이라면 괜찮지만, test 이미지가 불필요하게 레지스트리 공간을 차지할 수 있습니다.
필요시 PR에서는 빌드만 하고 푸시하지 않도록 조건을 추가할 수 있습니다.
💡 조건부 푸시 옵션
- name: Build and push Docker image uses: docker/build-push-action@v6 with: context: . file: docker/app/dockerfile - push: true + push: ${{ github.event_name != 'pull_request' }} tags: | ${{ secrets.DOCKERHUB_REPOSITORY_NAME }}:${{ steps.set-env.outputs.image_tag }} ${{ secrets.DOCKERHUB_REPOSITORY_NAME }}:${{ steps.set-env.outputs.environment }}-latest
68-97: 환경 결정 로직 LGTMPR, 수동 입력, 브랜치 기반 환경 결정 로직이 명확하게 구현되어 있습니다. 모든 케이스를 적절히 처리하고 있습니다.
36-43: 동시성 제어 및 러너 설정 LGTM
cancel-in-progress: true를 통한 동시성 제어와 self-hosted 러너 사용이 적절합니다. 리소스를 효율적으로 관리할 수 있습니다.
| # SpringBoot Config 파일들 로딩 | ||
| echo "" | ||
| echo "📝 Spring Boot 설정 파일 생성 중..." | ||
| mkdir -p ${{ secrets.SERVER_APP_DIRECTORY }}/config | ||
| echo "${{ secrets.APPLICATION_SECRET }}" > ${{ secrets.SERVER_APP_DIRECTORY }}/config/application-secret.yml | ||
| echo "${{ secrets.APPLICATION_PROFILE_SECRET }}" > ${{ secrets.SERVER_APP_DIRECTORY }}/config/application-${ENVIRONMENT}.yml |
There was a problem hiding this comment.
🧹 Nitpick | 🔵 Trivial
설정 파일 권한 제한 권장
민감한 설정 파일(application-secret.yml, application-${ENVIRONMENT}.yml)을 생성할 때 파일 권한을 제한하는 것이 좋습니다. 현재는 기본 umask에 따라 권한이 설정됩니다.
🔒 파일 권한 제한 제안
# SpringBoot Config 파일들 로딩
echo ""
echo "📝 Spring Boot 설정 파일 생성 중..."
mkdir -p ${{ secrets.SERVER_APP_DIRECTORY }}/config
- echo "${{ secrets.APPLICATION_SECRET }}" > ${{ secrets.SERVER_APP_DIRECTORY }}/config/application-secret.yml
- echo "${{ secrets.APPLICATION_PROFILE_SECRET }}" > ${{ secrets.SERVER_APP_DIRECTORY }}/config/application-${ENVIRONMENT}.yml
+ umask 077
+ echo "${{ secrets.APPLICATION_SECRET }}" > ${{ secrets.SERVER_APP_DIRECTORY }}/config/application-secret.yml
+ echo "${{ secrets.APPLICATION_PROFILE_SECRET }}" > ${{ secrets.SERVER_APP_DIRECTORY }}/config/application-${ENVIRONMENT}.yml
+ chmod 600 ${{ secrets.SERVER_APP_DIRECTORY }}/config/application-secret.yml
+ chmod 600 ${{ secrets.SERVER_APP_DIRECTORY }}/config/application-${ENVIRONMENT}.yml🤖 Prompt for AI Agents
In @.github/workflows/cd.yml around lines 174 - 179, Limit permissions on the
generated Spring Boot secret files by creating them with a restrictive umask or
by explicitly setting their mode to owner-read/write only; specifically, when
writing application-secret.yml and application-${ENVIRONMENT}.yml (the echo ...
> lines), either set umask 077 before creation or run a chmod 600 on those two
filenames immediately after they're written so only the file owner can
read/write the secrets.
| echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━" | ||
| echo "📥 Docker 이미지 Pull" | ||
| echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━" | ||
| docker compose pull | ||
| echo "🛑 기존 컨테이너 중지 중..." | ||
| docker compose down | ||
| echo "🚀 새 컨테이너 시작 중..." | ||
| docker compose up -d --remove-orphans | ||
| if [ $? -ne 0 ]; then | ||
| echo "❌ 컨테이너 시작 실패" | ||
| echo "" | ||
| echo "📋 컨테이너 로그:" | ||
| docker compose logs --tail=50 | ||
| exit 1 | ||
| fi | ||
| echo "✅ 컨테이너가 성공적으로 시작되었습니다" | ||
| echo "" | ||
| # 컨테이너 상태 확인 | ||
| echo "📊 컨테이너 상태:" | ||
| docker compose ps | ||
| echo "" | ||
| echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━" | ||
| echo "🎉 배포 완료!" | ||
| echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━" |
There was a problem hiding this comment.
🧹 Nitpick | 🔵 Trivial
오래된 Docker 이미지 정리 고려
배포 시 이전 이미지가 누적되어 디스크 공간이 부족해질 수 있습니다. 배포 성공 후 사용하지 않는 이미지를 정리하는 단계를 추가하는 것을 고려해 주세요.
🧹 이미지 정리 추가 제안
docker compose up -d --remove-orphans 이후에 다음을 추가:
# 사용하지 않는 이미지 정리 (dangling images)
echo "🧹 미사용 Docker 이미지 정리 중..."
docker image prune -f🤖 Prompt for AI Agents
In @.github/workflows/cd.yml around lines 187 - 216, Add an image-cleanup step
after the successful `docker compose up -d --remove-orphans` run: after
verifying the compose up exit status and success messages, invoke `docker image
prune -f` (or `docker system prune -f` if you want to clean unused
volumes/networks as well) to remove dangling/unreferenced images and reclaim
disk space; ensure this runs only on successful deploys and that its output is
logged so any reclaiming errors are visible.
There was a problem hiding this comment.
Actionable comments posted: 7
🤖 Fix all issues with AI agents
In @.github/workflows/cd.yml:
- Around line 241-253: Current failure-notification step ("❌ 배포 실패 알림") is fine;
to add external alerts, extend or add a step that runs only on failure (if:
failure()) and posts a concise payload to your external webhook(s) using secrets
like SLACK_WEBHOOK or DISCORD_WEBHOOK and the existing env vars (ENVIRONMENT,
IMAGE_TAG, SERVER_SSH_HOST); ensure the step references the same failure
condition, uses curl or an action to POST the message, and reads webhook URLs
from secrets to avoid leaking credentials while including the deployment context
in the payload.
- Around line 198-204: When the container start check fails (the if block that
currently runs docker compose logs --tail=50), broaden and deepen diagnostics:
include full or larger recent logs (e.g., remove or increase the --tail limit),
add docker compose ps and docker compose ps --services --filter
"status=running"/docker ps to show container states, and capture docker inspect
or docker compose inspect output and recent system logs (e.g., journalctl -u
docker or containerd) so the exit path prints richer context alongside the logs.
- Around line 3-23: The workflow's push paths include 'cd.yml' which references
a root-level file and won't match the actual workflow file; update the paths
list in the on.push.paths block to use the actual workflow location
'.github/workflows/cd.yml' so changes to the workflow file itself trigger the CD
pipeline (edit the on.push.paths entry that currently contains 'cd.yml').
- Around line 147-156: The Docker Hub login step in the "Docker Hub 로그인" block
exposes the token via a shell echo-and-pipe (echo "${{ secrets.DOCKERHUB_TOKEN
}}" | docker login ...) which can leak to process listings; replace this pattern
with a secure method such as switching to the official GitHub Action
(actions/docker/login@v2) and supply the credentials via its with: username: ${{
secrets.DOCKERHUB_USERNAME }} and password: ${{ secrets.DOCKERHUB_TOKEN }}, or
if you must use the docker CLI keep the secret only in an environment variable
(e.g., DOCKERHUB_TOKEN) and pass it to stdin (printf '%s' "$DOCKERHUB_TOKEN" |
docker login -u "$DOCKERHUB_USERNAME" --password-stdin) to avoid echoing the
token.
- Around line 168-180: The workflow writes secrets directly to files insecurely;
fix by setting a restrictive umask (umask 077) before creating files so they are
owner-only, ensure you reference the environment variable with braces
(${ENVIRONMENT}), create the config directory first (mkdir -p
${secrets.SERVER_APP_DIRECTORY}/config), write each secret
(secrets.DOCKER_COMPOSE_ENV, secrets.APPLICATION_SECRET,
secrets.APPLICATION_PROFILE_SECRET) to their target files under
${secrets.SERVER_APP_DIRECTORY} with owner-only perms (chmod 600) and use a
trap/cleanup to remove partial files on failure; ensure error handling verifies
writes succeeded and cleans up if not.
- Around line 39-43: The workflow sets an unused environment variable REPO_OWNER
under the env block; remove the REPO_OWNER entry (the REPO_OWNER environment
variable) from the env mapping so it’s no longer injected into the job context,
leaving ENVIRONMENT and IMAGE_TAG intact and verify no steps reference
REPO_OWNER elsewhere (search for REPO_OWNER usage) before committing.
📜 Review details
Configuration used: Path: .coderabbit.yaml
Review profile: ASSERTIVE
Plan: Pro
📒 Files selected for processing (1)
.github/workflows/cd.yml
🔇 Additional comments (6)
.github/workflows/cd.yml (6)
44-90: 환경 변수 검증 로직이 훌륭합니다!배포 전 필수 시크릿과 환경 변수를 검증하여 조기 실패(fail-fast)를 구현한 것은 매우 좋은 사례입니다. 명확한 에러 메시지와 함께 누락된 변수를 리스트업하여 디버깅을 용이하게 합니다.
91-106: 코드 체크아웃 및 배포 정보 출력이 적절합니다.최신 버전의
actions/checkout@v4를 사용하고 있으며, 배포 정보를 명확하게 출력하여 가시성을 높이고 있습니다.
218-240: 배포 요약 생성이 잘 구현되어 있습니다.
if: always()조건을 사용하여 성공/실패 여부와 관계없이 배포 요약을 생성하는 것은 좋은 사례입니다. GitHub Step Summary를 활용하여 배포 정보를 명확하게 표시합니다.
24-30: 재사용 가능한 워크플로우 패턴이 올바르게 구현되어 있습니다
ci.yml이 존재하며,workflow_call에서environment입력을required: false로 선택적으로 정의하고 있습니다.push이벤트에서inputs.environment가 전달되지 않더라도,ci.yml의set-env단계에서 이를 안전하게 처리합니다:
- PR 트리거 → "test"
inputs.environment제공됨 → 해당 값 사용- main 브랜치 → "prod"
- develop 브랜치 → "dev"
출력값(environment, repo_owner, image_tag)도 모두 올바르게 정의되어 있습니다.
254-281: Review comment is likely incorrect - DOCKERHUB_REPOSITORY_NAME은 저장소 수준 시크릿입니다.이 우려는 타당하지 않습니다.
ci.yml워크플로우의build-and-test작업이environment컨텍스트 없이 동일한secrets.DOCKERHUB_REPOSITORY_NAME,secrets.DOCKERHUB_TOKEN,secrets.DOCKERHUB_USERNAME을 성공적으로 사용하고 있습니다(ci.yml의 "Log in to Docker Hub" 및 "Build and push Docker image" 단계 참조). 이 시크릿들이 환경별 시크릿이었다면ci.yml작업이 이미 실패했을 것입니다. 따라서 이 시크릿들은 저장소 수준에 정의되어 있으며,skip-test-deployment작업에서environment컨텍스트 없이도 정상적으로 접근 가능합니다.Likely an incorrect or invalid review comment.
108-119: Docker Compose 파일 전송이 적절합니다.
appleboy/scp-action@v1을 사용하여 파일을 안전하게 전송하고 있으며,strip_components설정으로 경로를 올바르게 조정하고 있습니다. 메이저 버전 태그(@v1)는 자동으로 최신 v1.x 릴리스(현재 v1.0.0)로 업데이트되므로 보안 패치와 버그 수정을 지속적으로 받을 수 있습니다.
| on: | ||
| push: | ||
| branches: | ||
| - develop | ||
| - main | ||
| paths: | ||
| - 'src/**' | ||
| - 'build.gradle.kts' | ||
| - 'docker/**' | ||
| - 'cd.yml' | ||
|
|
||
| workflow_dispatch: | ||
| inputs: | ||
| environment: | ||
| description: 'Deploy environment' | ||
| required: true | ||
| type: choice | ||
| options: | ||
| - dev | ||
| - prod | ||
|
|
There was a problem hiding this comment.
cd.yml 경로 필터가 잘못되었습니다.
Line 12의 경로 필터 'cd.yml'는 저장소 루트의 파일을 의미하지만, 실제 워크플로우 파일은 .github/workflows/cd.yml에 위치합니다. 이로 인해 워크플로우 파일 자체를 수정해도 CD가 트리거되지 않습니다.
🔧 경로 수정 제안
paths:
- 'src/**'
- 'build.gradle.kts'
- 'docker/**'
- - 'cd.yml'
+ - '.github/workflows/cd.yml'📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| on: | |
| push: | |
| branches: | |
| - develop | |
| - main | |
| paths: | |
| - 'src/**' | |
| - 'build.gradle.kts' | |
| - 'docker/**' | |
| - 'cd.yml' | |
| workflow_dispatch: | |
| inputs: | |
| environment: | |
| description: 'Deploy environment' | |
| required: true | |
| type: choice | |
| options: | |
| - dev | |
| - prod | |
| on: | |
| push: | |
| branches: | |
| - develop | |
| - main | |
| paths: | |
| - 'src/**' | |
| - 'build.gradle.kts' | |
| - 'docker/**' | |
| - '.github/workflows/cd.yml' | |
| workflow_dispatch: | |
| inputs: | |
| environment: | |
| description: 'Deploy environment' | |
| required: true | |
| type: choice | |
| options: | |
| - dev | |
| - prod |
🤖 Prompt for AI Agents
In @.github/workflows/cd.yml around lines 3 - 23, The workflow's push paths
include 'cd.yml' which references a root-level file and won't match the actual
workflow file; update the paths list in the on.push.paths block to use the
actual workflow location '.github/workflows/cd.yml' so changes to the workflow
file itself trigger the CD pipeline (edit the on.push.paths entry that currently
contains 'cd.yml').
| docker compose pull | ||
| echo "🛑 기존 컨테이너 중지 중..." | ||
| docker compose down | ||
| echo "🚀 새 컨테이너 시작 중..." | ||
| docker compose up -d --remove-orphans | ||
| if [ $? -ne 0 ]; then | ||
| echo "❌ 컨테이너 시작 실패" | ||
| echo "" | ||
| echo "📋 컨테이너 로그:" | ||
| docker compose logs --tail=50 | ||
| exit 1 | ||
| fi | ||
| echo "✅ 컨테이너가 성공적으로 시작되었습니다" | ||
| echo "" | ||
| # 컨테이너 상태 확인 | ||
| echo "📊 컨테이너 상태:" | ||
| docker compose ps | ||
| echo "" | ||
| echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━" | ||
| echo "🎉 배포 완료!" | ||
| echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━" | ||
There was a problem hiding this comment.
배포 후 헬스 체크 및 롤백 메커니즘이 누락되었습니다.
컨테이너가 시작된 후(Line 196) 애플리케이션이 실제로 정상 작동하는지 확인하는 헬스 체크가 없습니다. 이로 인해:
- 컨테이너는 실행 중이지만 앱이 크래시하거나 응답하지 않는 경우를 감지하지 못함
- 배포 실패 시 이전 버전으로 롤백하는 메커니즘이 없음
🏥 헬스 체크 및 롤백 로직 추가 제안
echo "🚀 새 컨테이너 시작 중..."
docker compose up -d --remove-orphans
if [ $? -ne 0 ]; then
echo "❌ 컨테이너 시작 실패"
echo ""
echo "📋 컨테이너 로그:"
docker compose logs --tail=50
exit 1
fi
echo "✅ 컨테이너가 성공적으로 시작되었습니다"
echo ""
+
+ # 헬스 체크 (애플리케이션이 실제로 응답하는지 확인)
+ echo "🏥 애플리케이션 헬스 체크 중..."
+ max_attempts=30
+ attempt=0
+ while [ $attempt -lt $max_attempts ]; do
+ if docker compose exec -T app wget --spider --tries=1 --timeout=2 http://localhost:8080/actuator/health 2>/dev/null; then
+ echo "✅ 애플리케이션이 정상적으로 응답합니다"
+ break
+ fi
+ attempt=$((attempt + 1))
+ echo "⏳ 헬스 체크 대기 중... ($attempt/$max_attempts)"
+ sleep 2
+ done
+
+ if [ $attempt -eq $max_attempts ]; then
+ echo "❌ 애플리케이션 헬스 체크 실패"
+ echo ""
+ echo "📋 최근 컨테이너 로그:"
+ docker compose logs --tail=100
+ echo ""
+ echo "🔄 이전 버전으로 롤백 시도..."
+ docker compose down
+ # 이전 이미지로 롤백하는 로직 추가 가능
+ exit 1
+ fi
# 컨테이너 상태 확인
echo "📊 컨테이너 상태:"Note: Spring Boot Actuator의 /actuator/health 엔드포인트를 사용한다고 가정했습니다. 실제 헬스 체크 엔드포인트에 맞게 조정하세요.
✅ 체크리스트
🔥 연관 이슈
🚀 작업 내용
dev와prod환경을 나누어 CI/CD를 적용했습니다.CI는 테스트 완료,CD는 본 PR merge를 기점으로 확인 및 오류 발생 시 수정 예정입니다.💬 리뷰 중점사항
📃 관련 문서
Summary by CodeRabbit
릴리스 노트
새로운 기능
변경 사항
✏️ Tip: You can customize this high-level summary in your review settings.