replace EMS with AvailabilityManagerOptimumStart

lib/openstudio-standards/standards/Standards.AirLoopHVAC.rb

@@ -270,103 +270,16 @@ def air_loop_hvac_optimum_start_required?(air_loop_hvac)
   # @param air_loop_hvac [OpenStudio::Model::AirLoopHVAC] air loop
   # @return [Boolean] returns true if successful, false if not
   def air_loop_hvac_enable_optimum_start(air_loop_hvac)
-    # Get the heating and cooling setpoint schedules
-    # for all zones on this airloop.
-    htg_clg_schs = []
-    air_loop_hvac.thermalZones.each do |zone|
-      # Skip zones with no thermostat
-      next if zone.thermostatSetpointDualSetpoint.empty?
-
-      # Get the heating and cooling setpoint schedules
-      tstat = zone.thermostatSetpointDualSetpoint.get
-      htg_sch = nil
-      if tstat.heatingSetpointTemperatureSchedule.is_initialized
-        htg_sch = tstat.heatingSetpointTemperatureSchedule.get
-      else
-        OpenStudio.logFree(OpenStudio::Warn, 'openstudio.standards.AirLoopHVAC', "For #{zone.name}: Cannot find a heating setpoint schedule for this zone, cannot apply optimum start control.")
-        next
-      end
-      clg_sch = nil
-      if tstat.coolingSetpointTemperatureSchedule.is_initialized
-        clg_sch = tstat.coolingSetpointTemperatureSchedule.get
-      else
-        OpenStudio.logFree(OpenStudio::Warn, 'openstudio.standards.AirLoopHVAC', "For #{zone.name}: Cannot find a cooling setpoint schedule for this zone, cannot apply optimum start control.")
-        next
-      end
-      htg_clg_schs << [htg_sch, clg_sch]
-    end
-
-    # Clean name of airloop
-    loop_name_clean = air_loop_hvac.name.get.to_s.gsub(/\W/, '').delete('_')
-    # If the name starts with a number, prepend with a letter
-    if loop_name_clean[0] =~ /[0-9]/
-      loop_name_clean = "SYS#{loop_name_clean}"
-    end
 
-    # Sensors
-    oat_db_c_sen = OpenStudio::Model::EnergyManagementSystemSensor.new(air_loop_hvac.model, 'Site Outdoor Air Drybulb Temperature')
-    oat_db_c_sen.setName('OAT')
-    oat_db_c_sen.setKeyName('Environment')
-
-    # Make a program for each unique set of schedules.
-    # For most air loops, all zones will have the same
-    # pair of schedules.
-    htg_clg_schs.uniq.each_with_index do |htg_clg_sch, i|
-      htg_sch = htg_clg_sch[0]
-      clg_sch = htg_clg_sch[1]
-
-      if htg_sch.to_ScheduleConstant.is_initialized
-        htg_sch_type = 'Schedule:Constant'
-      elsif htg_sch.to_ScheduleCompact.is_initialized
-        htg_sch_type = 'Schedule:Compact'
-      else
-        htg_sch_type = 'Schedule:Year'
-      end
-
-      if clg_sch.to_ScheduleCompact.is_initialized
-        clg_sch_type = 'Schedule:Constant'
-      elsif clg_sch.to_ScheduleCompact.is_initialized
-        clg_sch_type = 'Schedule:Compact'
-      else
-        clg_sch_type = 'Schedule:Year'
-      end
-
-      # Actuators
-      htg_sch_act = OpenStudio::Model::EnergyManagementSystemActuator.new(htg_sch, htg_sch_type, 'Schedule Value')
-      htg_sch_act.setName("#{loop_name_clean}HtgSch#{i}")
-
-      clg_sch_act = OpenStudio::Model::EnergyManagementSystemActuator.new(clg_sch, clg_sch_type, 'Schedule Value')
-      clg_sch_act.setName("#{loop_name_clean}ClgSch#{i}")
-
-      # Programs
-      optstart_prg = OpenStudio::Model::EnergyManagementSystemProgram.new(air_loop_hvac.model)
-      optstart_prg.setName("#{loop_name_clean}OptimumStartProg#{i}")
-      optstart_prg_body = <<-EMS
-      IF DaylightSavings==0 && DayOfWeek>1 && Hour==5 && #{oat_db_c_sen.handle}<23.9 && #{oat_db_c_sen.handle}>1.7
-        SET #{clg_sch_act.handle} = 29.4
-        SET #{htg_sch_act.handle} = 15.6
-      ELSEIF DaylightSavings==0 && DayOfWeek==1 && Hour==7 && #{oat_db_c_sen.handle}<23.9 && #{oat_db_c_sen.handle}>1.7
-        SET #{clg_sch_act.handle} = 29.4
-        SET #{htg_sch_act.handle} = 15.6
-      ELSEIF DaylightSavings==1 && DayOfWeek>1 && Hour==4 && #{oat_db_c_sen.handle}<23.9 && #{oat_db_c_sen.handle}>1.7
-        SET #{clg_sch_act.handle} = 29.4
-        SET #{htg_sch_act.handle} = 15.6
-      ELSEIF DaylightSavings==1 && DayOfWeek==1 && Hour==6 && #{oat_db_c_sen.handle}<23.9 && #{oat_db_c_sen.handle}>1.7
-        SET #{clg_sch_act.handle} = 29.4
-        SET #{htg_sch_act.handle} = 15.6
-      ELSE
-        SET #{clg_sch_act.handle} = NULL
-        SET #{htg_sch_act.handle} = NULL
-      ENDIF
-      EMS
-      optstart_prg.setBody(optstart_prg_body)
-
-      # Program Calling Managers
-      setup_mgr = OpenStudio::Model::EnergyManagementSystemProgramCallingManager.new(air_loop_hvac.model)
-      setup_mgr.setName("#{loop_name_clean}OptimumStartCallingManager#{i}")
-      setup_mgr.setCallingPoint('BeginTimestepBeforePredictor')
-      setup_mgr.addProgram(optstart_prg)
-    end
+    avm_os = OpenStudio::Model::AvailabilityManagerOptimumStart.new(air_loop_hvac.model)
+    avm_os.setName("#{air_loop_hvac.name.get} Optimum Start Availability Manager")
+    avm_os.setControlAlgorithm('AdaptiveTemperatureGradient')
+    # these are defaults, but set here for visibility
+    avm_os.setInitialTemperatureGradientduringCooling(2)
+    avm_os.setInitialTemperatureGradientduringHeating(2)
+    avm_os.setNumberofPreviousDays(3)
+    # add availability manager
+    air_loop_hvac.addAvailabilityManager(avm_os)
 
     OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.AirLoopHVAC', "For #{air_loop_hvac.name}: Optimum start control enabled.")