Adding Community Work on Post Processors to Official Makera Github. Consider this a stable version of the Community profiles work and the Community profiles page to be where bleeding edge features are added.
https://github.com/Carvera-Community/Carvera_Community_Profiles
Fixes:
Fusion:
4th axis simultaneous machining bugfix. Going below 0 in Z no longer breaks arc moves
Fusion tool library expanded for the entirety of the makera toolbit library
When exporting split files include tool number in the header of each file
allow ext control of air
Fixes bug with high feedrate moves
Improves toolpath dump information
Added machine simulation capable machine files and updated their kinematics to match the machine properly
Added HSMlib and cvs tool files for the entire tool library
added passthrough and other manual NC commands. See the cps file for more information or https://www.youtube.com/watch?v=1xPcono_qTk&t=250s
added the ability to select several manual tool change types from a dropdown that defaults to stock behavior. The manual tool changes include a manual tool change that works with the stock C1 and a manual tool change that requires the community firmware. Feel free to contact me for more information about this feature
Freecad:
Tool libraries added
Vectric (Vcarve and Aspire)
added manual tool changes for the stock firmware with the C1 machine.
If you plan to never mix tool shank sizes in a job, then you can set the flag colletChange to false (see the current post processor). If you set colletChange to 'false' then the post processor does not check for shank size and does generate a functionally correct gcode file presuming all the bits you are using have the same shank size. WARNING!!! If you do not pass shank size (or do so incorrectly) and colletChange is set to 'true' then the post processor will issue a warning and generate a functionally incomplete gcode file.
Other machines: files added to github repo for future pull requests
Contributors:
@faecorrigan
@SergeBakharev
@mcowger
EDSWall on Discord
