diff --git a/src/components/Canvas/hooks/useKonvaTransformer.ts b/src/components/Canvas/hooks/useKonvaTransformer.ts
index 0007fc30..2f565157 100644
--- a/src/components/Canvas/hooks/useKonvaTransformer.ts
+++ b/src/components/Canvas/hooks/useKonvaTransformer.ts
@@ -190,7 +190,17 @@ export function useKonvaTransformer({
       : ObjectRegistry[singleType]?.heightLocked
         ? []
         : BARCODE_1D_TYPES.has(singleType)
-          ? ["top-center", "bottom-center"]
+          ? [
+              "top-center",
+              "bottom-center",
+              // middle-left / middle-right drag the module-width axis.
+              // The bar count is fixed by content, so the resulting width
+              // is rounded to a valid ZPL ^BY moduleWidth (1..10) in
+              // commitBarcodeWidthHeightTransform on release; during the
+              // drag the bitmap stretches free-form for visual feedback.
+              "middle-left",
+              "middle-right",
+            ]
           : isUniformScale
             ? ["top-left", "top-right", "bottom-left", "bottom-right"]
             : undefined;
@@ -307,9 +317,23 @@ export function useKonvaTransformer({
     );
     const renderedXDots = pxToDots(topLeft.x - objectsOffsetX, scale, dpmm);
     const renderedYDots = pxToDots(topLeft.y - labelOffsetY, scale, dpmm);
+    // For FT-anchored 1D barcodes, model.y is the bar baseline — needs the
+    // post-resize bar height to convert from the bbox top back. Pipe the
+    // scaled height through the same snap() commitBarcodeWidthHeight-
+    // Transform uses so the baseline math sees the *committed* value and
+    // there's no 1-dot drift between the two pathways.
+    const newBarHeightDots =
+      obj.positionType === "FT" && BARCODE_1D_TYPES.has(obj.type)
+        ? Math.max(1, snap(Math.round((obj.props as { height: number }).height * sy)))
+        : undefined;
     // Invert per-type render offsets (e.g. QR's hardcoded +10 dot Y) so the
     // stored model position matches what BarcodeObject.handleDragEnd produces.
-    const modelPos = modelPositionFromRenderedTopLeft(obj, renderedXDots, renderedYDots);
+    const modelPos = modelPositionFromRenderedTopLeft(
+      obj,
+      renderedXDots,
+      renderedYDots,
+      newBarHeightDots,
+    );
     // Only apply snap when the resize actually moved the position
     // (e.g. dragging the top-left handle). Anchored-corner drags must keep
     // the original position so off-grid shapes don't snap as a side-effect.
diff --git a/src/components/Canvas/transformPosition.ts b/src/components/Canvas/transformPosition.ts
index 5855faba..08b30ffd 100644
--- a/src/components/Canvas/transformPosition.ts
+++ b/src/components/Canvas/transformPosition.ts
@@ -1,4 +1,4 @@
-import type { LabelObject } from "../../registry";
+import { BARCODE_1D_TYPES, type LabelObject } from "../../registry";
 import { QR_FO_Y_OFFSET_DOTS } from "./bwipConstants";
 
 /**
@@ -9,20 +9,33 @@ import { QR_FO_Y_OFFSET_DOTS } from "./bwipConstants";
  * Currently handles:
  * - QR (FO): subtracts the hardcoded +10 dot Y-offset that BarcodeObject adds
  *   to compensate for Zebra firmware artifact.
+ * - 1D barcodes (FT): adds the new bar height back so obj.y stays on the
+ *   bar baseline that ^FT anchors at. Without the correction every resize
+ *   commits the bar TOP as the new obj.y and the next render shifts the
+ *   barcode up by another bar-height.
  *
  * Used by onTransformEnd to mirror the rendered→model conversion that
  * BarcodeObject.handleDragEnd performs for drag.
  *
- * Note: Field-Typeset (FT) corrections for barcode resize are not yet
- * implemented here; FT-mode barcode resize still has known position drift.
+ * Note: QR-FT correction is not yet implemented (the additional firmware
+ * 3-module offset would need a separate code path); FT resize on QR still
+ * drifts.
  */
 export function modelPositionFromRenderedTopLeft(
   obj: LabelObject,
   renderedXDots: number,
   renderedYDots: number,
+  newBarHeightDots?: number,
 ): { x: number; y: number } {
   if (obj.type === "qrcode" && obj.positionType !== "FT") {
     return { x: renderedXDots, y: renderedYDots - QR_FO_Y_OFFSET_DOTS };
   }
+  if (
+    obj.positionType === "FT" &&
+    BARCODE_1D_TYPES.has(obj.type) &&
+    newBarHeightDots !== undefined
+  ) {
+    return { x: renderedXDots, y: renderedYDots + newBarHeightDots };
+  }
   return { x: renderedXDots, y: renderedYDots };
 }
diff --git a/src/registry/barcode1d.tsx b/src/registry/barcode1d.tsx
index 1f9fcdd1..a04f960c 100644
--- a/src/registry/barcode1d.tsx
+++ b/src/registry/barcode1d.tsx
@@ -3,7 +3,7 @@ import { useT } from '../lib/useT';
 import type { Translations } from '../locales';
 import { inputCls, labelCls } from '../components/Properties/styles';
 import { fieldPos, fdField } from './zplHelpers';
-import { commitHeightTransform } from './transformHelpers';
+import { commitBarcodeWidthHeightTransform } from './transformHelpers';
 import { filterContent, type ContentSpec } from './contentSpec';
 import { type ZplRotation } from './rotation';
 import { RotationSelect } from '../components/Properties/RotationSelect';
@@ -71,7 +71,13 @@ export function createBarcode1D(config: Barcode1DConfig): ObjectTypeDefinition<B
     heightLocked: config.heightLocked,
     interpretationLocked: config.interpretationLocked,
 
-    commitTransform: config.heightLocked ? undefined : commitHeightTransform,
+    // Width-locked symbologies (currently just heightLocked = true ones like
+    // GS1 DataBar) keep undefined so the transformer is disabled entirely.
+    // Otherwise the bar height scales with sy and the module width scales
+    // with sx (clamped to [1, 10] in commitBarcodeWidthHeightTransform).
+    commitTransform: config.heightLocked
+      ? undefined
+      : commitBarcodeWidthHeightTransform,
 
     toZPL: (obj: LabelObjectBase & { props: Barcode1DProps }) => {
       // Normalize printInterpretation for symbologies that have no HRI in ZPL
diff --git a/src/registry/transformHelpers.ts b/src/registry/transformHelpers.ts
index f35a3527..1702e156 100644
--- a/src/registry/transformHelpers.ts
+++ b/src/registry/transformHelpers.ts
@@ -38,15 +38,23 @@ export function commitWidthHeightTransform<P extends WidthHeightProps>(
   } as Partial<P>;
 }
 
-/** Shared commitTransform for 1D barcodes — only the bar height scales (width
- *  is determined by content + module width, not by the resize anchor). */
-export function commitHeightTransform<P extends { height: number }>(
+/**
+ * commitTransform for 1D barcodes. Vertical drag scales bar height (sy),
+ * horizontal drag scales the module width (sx) — the latter is clamped
+ * to the ZPL `^BY` range [1, 10]. During the drag the bitmap stretches
+ * free-form for visual feedback; this commit rounds the result to a
+ * valid integer moduleWidth on release.
+ */
+export function commitBarcodeWidthHeightTransform<
+  P extends { height: number; moduleWidth: number },
+>(
   obj: LabelObjectBase & { props: P },
   ctx: TransformContext,
 ): Partial<P> {
-  const { sy, snap } = ctx;
+  const { sx, sy, snap } = ctx;
   return {
     height: Math.max(1, snap(Math.round(obj.props.height * sy))),
+    moduleWidth: clamp(1, 10, Math.round(obj.props.moduleWidth * sx)),
   } as Partial<P>;
 }