We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
In the settings, hardware, LED Mode: Idle When On is selected, led is Off When Off is selected, led is On
The On/Off are inverted
1.13.1
{"firmware":"milight-hub","version":"1.13.1-beta2","ip_address":"172.19.3.37","reset_reason":"7","variant":"esp32","free_heap":215768,"arduino_version":"v4.4.6-dirty","free_stack":5548,"flash_used":2259,"flash_total":113201,"flash_pct_free":98,"mqtt":{"configured":true,"connected":true,"status":"Connected"},"queue_stats":{"length":0,"dropped_packets":0}}
{"admin_username":"","admin_password":"","ce_pin":4,"csn_pin":5,"reset_pin":0,"led_pin":-2,"radio_interface_type":"nRF24","packet_repeats":50,"http_repeat_factor":1,"auto_restart_period":0,"mqtt_server":"172.19.3.140","mqtt_username":"","mqtt_password":"","mqtt_topic_pattern":"milight/commands/:device_id/:device_type/:group_id","mqtt_update_topic_pattern":"","mqtt_state_topic_pattern":"milight/state/:device_id/:device_type/:group_id","mqtt_client_status_topic":"milight/client_status","simple_mqtt_client_status":true,"discovery_port":48899,"listen_repeats":3,"state_flush_interval":10000,"mqtt_state_rate_limit":500,"mqtt_debounce_delay":500,"mqtt_retain":true,"packet_repeat_throttle_sensitivity":0,"packet_repeat_throttle_threshold":200,"packet_repeat_minimum":3,"enable_automatic_mode_switching":false,"led_mode_wifi_config":"Fast toggle","led_mode_wifi_failed":"On","led_mode_operating":"Slow blip","led_mode_packet":"Flicker","led_mode_packet_count":3,"hostname":"milight-hub","rf24_power_level":"MAX","rf24_listen_channel":"LOW","wifi_static_ip":"","wifi_static_ip_gateway":"","wifi_static_ip_netmask":"","packet_repeats_per_loop":10,"home_assistant_discovery_prefix":"homeassistant/","wifi_mode":"g","default_transition_period":500,"rf24_channels":["LOW","MID","HIGH"],"device_ids":[],"gateway_configs":[],"group_state_fields":["state","brightness","computed_color","mode","color_temp","color_mode"],"ignored_listen_protocols":[]}
Board: esp32dev Build with pio run --target upload -e esp32
pio run --target upload -e esp32
The text was updated successfully, but these errors were encountered:
No branches or pull requests
Describe the bug
In the settings, hardware, LED Mode: Idle
When On is selected, led is Off
When Off is selected, led is On
The On/Off are inverted
Setup information
Firmware version
1.13.1
Output of http://milight-hub.local/about
Output of http://milight-hub.local/settings
Additional context
Board: esp32dev
Build with
pio run --target upload -e esp32
The text was updated successfully, but these errors were encountered: