Solaredge.md

Using a Solaredge electrical meter input source

To use a Solaredge electrical meter as an input source, set up the uni-meter.conf file as follows:

• The address is the IP of your solaredge inverter, which is connected to the Modbus counter
• To retrieve the data, the Modbus TCP interface must be activated on the inverter. To do this, you can either use the SetApp or connect directly to the inverter's WiFi from another PC / notebook / tablet and open the configuration page.
• Default port is 1502

uni-meter {
  output = "uni-meter.output-devices.shelly-pro3em"

  input = "uni-meter.input-devices.solaredge"
  
  input-devices {   
    solaredge {
      address = "192.168.178.125"
      port = 1502
      unit-id = 1
    }
  }  
}