diff --git a/example-config/README.md b/example-config/README.md
index 3790815..2ea731d 100644
--- a/example-config/README.md
+++ b/example-config/README.md
@@ -1,15 +1,86 @@
-# Example Config Folder
+# Example Config
 
-The config folder should hold the following configuration information for Yoorbell:
+Yoorbell uses the *config.yaml* file to source the following configuration information.
 
 ## API Token
 
-The API token or key, provided by YO to identify your API account, found in the file *api_token.txt*.
+The API token or key, provided by YO to identify your API account.
 
-## Authorized Users
+```yaml
+api-token:  abcdefgh-ijkl-mnop-qrst-uvwxyz012345
+```
 
-The list of users authorized to use Yoorbell to enter.  It is found in *authorized_users.txt*, and consists of a list of one username per line.  YO usernames are in ALL CAPS.
+## Users
 
-## Notify Users
+There are two types of users Yoorbell needs to know about: *authorized users* and *notify users*.
 
-The list of users to notify (via YO) when a buzz is detected by Yoorbell.  It is found in *notify_users.txt*, and consists of a list of one username per line.  YO usernames are in ALL CAPS.
\ No newline at end of file
+```yaml
+users:
+  authorized:
+    - USER001
+    - USER002
+    - USER004
+  notify:
+    - USER001
+    - USER003
+    - USER004
+```
+
+**Note that all usernames are in ALL CAPS.**
+
+### Authorized Users
+
+These users are authorized to unlock the door via Yoorbell.
+
+### Notify Users
+
+ These users will be notified when someone buzzes/rings the Yoorbell.
+
+## Pins
+
+Two pins are necessary to run Yoorbell: the *buzz* pin and the *door* pin.
+
+```yaml
+pins:
+  buzz: 24
+  door: 23
+```
+
+### Buzz Pin
+
+The *buzz* pin is the pin which listens for a signal from the intercom buzzer.
+
+### Door Pin
+
+The *door* pin is the pin which will be signaled when the door must be unlocked.
+
+## Port
+
+Yoorbell runs an HTTP server to receive GET requests from the YO API servers, when a YO is sent to the API account.  *port* identifies the port on which the server should listen.
+
+```yaml
+port: 8979
+```
+
+## Calibration
+
+There are a few pieces of calibration information Yoorbell uses, relating to ensuring a buzz is properly detected.
+
+```yaml
+calibration:
+  bouncetime: 200
+  samples:  20
+  delay:  5
+```
+
+### Bouncetime
+
+The *bouncetime* parameter is the time, in ms, which should be used to debounce the signal on the buzz pin.
+
+### Samples
+
+The *samples* parameter is the number of samples which should be taken of the value on the buzz pin, to determine whether the edge detected is a false positive.
+
+### Delay
+
+The *delay* parameter is the delay between samples, in ms.
\ No newline at end of file