Release RX MCUs FreeRTOS IoT Reference 1.1.0 comes from original 202210.01-LTS

Summary for package v202210.01-LTS-1.1.0

Supported Boards

RX MCU and Board	Compiler	Endian	Connectivity	Import project	Project generation (PG)
CK-RX65N	CCRX	Little	Ethernet	Yes	No
CK-RX65N	CCRX	Little	Cellular(CAT M1) RYZ014A	Yes	No

Note:

• PG creates a new project in e2studio using the New Project Wizard to workspace
• Import project means using e2studio to import existing project in package to workspace

FIT Modules and RX Driver Package

The following table indicates name and version of FIT modules are using under reference and version of RX Driver Package.

FIT module	Revision of FIT module	Version of RX Driver Package
r_bsp	7.20	1.36
r_s12ad_rx	5.00	1.36 - 1.37
r_byteq	2.00	1.33 - 1.36
r_cellular	1.11	1.40
r_ether_rx	1.23	1.36 - 1.40
r_flash_rx	5.00	1.39
r_sci_rx	4.40	1.36
r_tsip_rx	1.17.l	--
r_fwup	2.0.1	--
r_irq_rx	4.00	1.34

Demos

• PubSub
  • Simple MQTT communication with AWS Management Console
• Fleet Provisioning
  • Generating and securely delivering device certificates and private keys to your devices by AWS when they connect to AWS IoT for the first time
• OTA Update
  • Update new firmware via MQTT

The preceding demos use the following technical elements of the AWS IoT:

• AWS IoT Jobs
• MQTT File Delivery

Limitation

• CLI task cannot run after starting the demo to avoid the SCI conflict.

• OTA demo will not work properly unless otaconfigMAX_NUM_BLOCKS_REQUEST is set to "1".
  If otaconfigMAX_NUM_BLOCKS_REQUEST is set to anything other than 1, a build error will occur.

• The following macros are not supported by this source code.
  If you build the above macros, a build error will occur.
  LFS_NO_MALLOC
LFS_THREADSAFE

• Limitations on the xGetMQTTAgentState() function
  In the following case, the xGetMQTTAgentState() function for monitoring the communication status returns the state of established MQTT connection with AWS (MQTT_AGENT_STATE_CONNECTED) without detecting the disconnection:
  The hook function *1 is called by occuring an error of a TCP_Sockets API *2 (disconnection with AWS) inner the xGetMQTTAgentState(), then this hook restores the connection to established state.
  *1 The hook function defined in USER_TCP_HOOK_FUNCTION macro in src/frtos_config/user_tcp_hook_config.h
  *2 TCP_Sockets API is a function defined in TCP_Sockets_xxxx

• Notes on bootloader to application transition.
  When transitioning from the bootloader sample program to the application, the settings of the bootloader's peripheral functions are taken over by the application.
  For more information, check chapter 7 of the following document.
  RX Family Firmware Update module Using Firmware Integration Technology Application Notes

Release RX MCUs FreeRTOS IoT Reference 1.0.1 comes from original 202210.01-LTS

Summary for package v202210.01-LTS-1.0.1

Supported Boards

RX MCU and Board	Compiler	Endian	Connectivity	Import project	Project generation (PG)
CK-RX65N	CCRX	Little	Ethernet	Yes	Yes
CK-RX65N	CCRX	Little	Cellular(CAT M1) RYZ014A	Yes	Yes

Note:

• PG creates a new project in e2studio using the New Project Wizard to workspace
• Import project means using e2studio to import existing project in package to workspace
• The change from previous version is that the "Configuration" folder for PG has been added. This change won't affect the demo behavior when importing project.

FIT Modules and RX Driver Package

The following table indicates name and version of FIT modules are using under reference and version of RX Driver Package.

FIT module	Revision of FIT module	Version of RX Driver Package
r_bsp	7.20	1.36
r_s12ad_rx	5.00	1.36 - 1.37
r_byteq	2.00	1.33 - 1.36
r_cellular	1.11	1.40
r_ether_rx	1.23	1.36 - 1.40
r_flash_rx	5.00	1.39
r_sci_rx	4.40	1.36
r_tsip_rx	1.17.l	--
r_irq_rx	4.00	1.34

Demos

• PubSub
  • Simple MQTT communication with AWS Management Console
• Fleet Provisioning
  • Generating and securely delivering device certificates and private keys to your devices by AWS when they connect to AWS IoT for the first time

The preceding demos use the following technical elements of the AWS IoT:

• AWS IoT Jobs
• MQTT File Delivery

Limitation

• OTA update is not supported.
• ROM/RAM size is not optimized.
• CLI task cannot run after starting the demo to avoid the SCI conflict.
• The LittleFS starting block address (RM_LITTLEFS_FLASH_DATA_START) cannot be changed.

Release RX MCUs FreeRTOS IoT Reference 1.0.0 comes from original 202210.01-LTS

Summary for package v202210.01-LTS-1.0.0

Supported Boards

RX MCU and Board	Compiler	Endian	Connectivity	Import project	Project generation (PG)
CK-RX65N	CCRX	Little	Ethernet	Yes	No
CK-RX65N	CCRX	Little	Cellular(CAT M1) RYZ014A	Yes	No

Note:

• PG creates a new project in e2studio using the New Project Wizard to workspace
• Import project means using e2studio to import existing project in package to workspace

FIT Modules and RX Driver Package

The following table indicates name and version of FIT modules are using under reference and version of RX Driver Package.

FIT module	Revision of FIT module	Version of RX Driver Package
r_bsp	7.20	1.36
r_s12ad_rx	5.00	1.36 - 1.37
r_byteq	2.00	1.33 - 1.36
r_cellular	1.11	1.40
r_ether_rx	1.23	1.36 - 1.40
r_flash_rx	5.00	1.39
r_sci_rx	4.40	1.36
r_tsip_rx	1.17.l	--
r_irq_rx	4.00	1.34

Demos

• PubSub
  • Simple MQTT communication with AWS Management Console
• Fleet Provisioning
  • Generating and securely delivering device certificates and private keys to your devices by AWS when they connect to AWS IoT for the first time

The preceding demos use the following technical elements of the AWS IoT:

• AWS IoT Jobs
• MQTT File Delivery

Limitation

• OTA update is not supported.
• ROM/RAM size is not optimized.
• CLI task cannot run after starting the demo to avoid the SCI conflict.
• The project generation feature on e2 studio can not be supported.