main.c

/*
 * main.c
 *
 *  Created on: Apr 1, 2022
 *      Author: sfdd
 */


#include "cy_pdl.h"
#include "cyhal.h"
#include "cybsp.h"

#include "wifi_config.h"
#include "i2c_utils.h"
#include "secure_http_server.h"
#include "mqtt_task.h"
//#include "tft_task.h"

#include "cy_retarget_io.h"
#include <FreeRTOS.h>
#include <task.h>
#include "stdlib.h"

/* RTOS related macros. */
#define HTTPS_SERVER_TASK_STACK_SIZE        (5 * 1024)
#define HTTPS_SERVER_TASK_PRIORITY          (1)

/* This enables RTOS aware debugging */
volatile int uxTopUsedPriority;

/* HTTPS server task handle. */
TaskHandle_t https_server_task_handle;

/* Define extern variables. */
struct bmp2_dev bmp_sensor;
struct bmp2_config bmp_sensor_conf;
//mtb_light_sensor_t light_sensor;
cy_wcm_ip_address_t ip_addr;

int main(void)
{
	cy_rslt_t result;

	/* This enables RTOS aware debugging in OpenOCD */
	uxTopUsedPriority = configMAX_PRIORITIES - 1;

	/* Initialize the device and board peripherals */
	result = cybsp_init() ;
	CY_ASSERT(result == CY_RSLT_SUCCESS);

	__enable_irq();
	result = cy_retarget_io_init(CYBSP_DEBUG_UART_TX, CYBSP_DEBUG_UART_RX, CY_RETARGET_IO_BAUDRATE);
	CY_ASSERT(result == CY_RSLT_SUCCESS);

	/* Initialize the User LED. */
	result = cyhal_gpio_init(CYBSP_USER_LED, CYHAL_GPIO_DIR_BIDIRECTIONAL, CYHAL_GPIO_DRIVE_STRONG, CYBSP_LED_STATE_OFF);
	CY_ASSERT(result == CY_RSLT_SUCCESS);

	/* Initialize I2C interfaces. */
	result = i2c_master_init();
	CY_ASSERT(result == CY_RSLT_SUCCESS);

	/* Initialize the CY8CKIT_028_TFT board */
	result = mtft_sensor_init();
	CY_ASSERT(result == CY_RSLT_SUCCESS);

	/* Initialize the light sensor board */
	result = light_sensor_init();
	CY_ASSERT(result == CY_RSLT_SUCCESS);

	/* Initialize BME280 sensor */
	bmp2_sensor_init();

	while ( wifi_connect() != CY_RSLT_SUCCESS ) {
		Cy_SysLib_Delay(500);
	}

	/* Create the MQTT Client task. */
	xTaskCreate(mqtt_client_task, "MQTT Client task", MQTT_CLIENT_TASK_STACK_SIZE,
			NULL, MQTT_CLIENT_TASK_PRIORITY, NULL);

	/* Starts the HTTPS server in secure mode. */
	xTaskCreate(https_server_task, "HTTPS Server", HTTPS_SERVER_TASK_STACK_SIZE, NULL,
			HTTPS_SERVER_TASK_PRIORITY, &https_server_task_handle);

	/* Create the TFT task. */
	xTaskCreate(tft_display_task, "TFT Display task", 1024,
			NULL, 3, NULL);

	/* Start the FreeRTOS scheduler */
	vTaskStartScheduler();
}

/* [] END OF FILE */