From 8f14ba965f9a5da445bd420b6474773fb6f0b6c5 Mon Sep 17 00:00:00 2001 From: Dmitry Dodzin Date: Tue, 23 Jul 2024 15:14:13 +0300 Subject: [PATCH] Update docs once again --- mirrord-schema.json | 2 +- mirrord/config/src/feature/fs/advanced.rs | 9 ++++++--- 2 files changed, 7 insertions(+), 4 deletions(-) diff --git a/mirrord-schema.json b/mirrord-schema.json index 83c14811114..d184fcb7925 100644 --- a/mirrord-schema.json +++ b/mirrord-schema.json @@ -151,7 +151,7 @@ "additionalProperties": false, "definitions": { "AdvancedFsUserConfig": { - "description": "Allows the user to specify the default behavior for file operations:\n\n1. `\"read\"` - Read from the remote file system (default) 2. `\"write\"` - Read/Write from the remote file system. 3. `\"local\"` - Read from the local file system. 4. `\"localwithoverrides\"` - perform fs operation locally, unless the path matches a pre-defined or user-specified exception.\n\n> Note: by default, some paths are read locally or remotely, regardless of the selected FS mode. > This is described in further detail below.\n\nBesides the default behavior, the user can specify behavior for specific regex patterns. Case insensitive.\n\n1. `\"read_write\"` - List of patterns that should be read/write remotely. 2. `\"read_only\"` - List of patterns that should be read only remotely. 3. `\"local\"` - List of patterns that should be read locally. 4. `\"not_found\"` - List of patters that should never be read nor written. These files should be treated as non-existent.\n\nThe logic for choosing the behavior is as follows:\n\n1. Check if one of the patterns match the file path, do the corresponding action. There's no specified order if two lists match the same path, we will use the first one (and we do not guarantee what is first).\n\n**Warning**: Specifying the same path in two lists is unsupported and can lead to undefined behaviour.\n\n2. There are pre-defined exceptions to the set FS mode. 1. Paths that match [the patterns defined here](https://github.com/metalbear-co/mirrord/tree/latest/mirrord/layer/src/file/filter/read_local_by_default.rs) are read locally by default. 2. Paths that match [the patterns defined here](https://github.com/metalbear-co/mirrord/tree/latest/mirrord/layer/src/file/filter/read_remote_by_default.rs) are read remotely by default when the mode is `localwithoverrides`. 3. Paths that match [the patterns defined here](https://github.com/metalbear-co/mirrord/tree/latest/mirrord/layer/src/file/filter/not_found_by_default.rs) under the running user's home directory will not be found by the application when the mode is not `local`.\n\nIn order to override that default setting for a path, or a pattern, include it the appropriate pattern set from above. E.g. in order to read files under `/etc/` remotely even though it is covered by [the set of patterns that are read locally by default](https://github.com/metalbear-co/mirrord/tree/latest/mirrord/layer/src/file/filter/read_local_by_default.rs), add `\"^/etc/.\"` to the `read_only` set.\n\n3. If none of the above match, use the default behavior (mode).\n\nFor more information, check the file operations [technical reference](https://mirrord.dev/docs/reference/fileops/).\n\n```json { \"feature\": { \"fs\": { \"mode\": \"write\", \"read_write\": \".+\\\\.json\" , \"read_only\": [ \".+\\\\.yaml\", \".+important-file\\\\.txt\" ], \"local\": [ \".+\\\\.js\", \".+\\\\.mjs\" ], \"not_found\": [ \"\\\\.config/gcloud\" ] } } } ```", + "description": "Allows the user to specify the default behavior for file operations:\n\n1. `\"read\"` - Read from the remote file system (default) 2. `\"write\"` - Read/Write from the remote file system. 3. `\"local\"` - Read from the local file system. 4. `\"localwithoverrides\"` - perform fs operation locally, unless the path matches a pre-defined or user-specified exception.\n\n> Note: by default, some paths are read locally or remotely, regardless of the selected FS mode. > This is described in further detail below.\n\nBesides the default behavior, the user can specify behavior for specific regex patterns. Case insensitive.\n\n1. `\"read_write\"` - List of patterns that should be read/write remotely. 2. `\"read_only\"` - List of patterns that should be read only remotely. 3. `\"local\"` - List of patterns that should be read locally. 4. `\"not_found\"` - List of patters that should never be read nor written. These files should be treated as non-existent. 4. `\"mapping\"` - Map of patterns and their corresponding replacers. The replacement happens before any specific behavior as defined above or mode (uses [`Regex::replace`](https://docs.rs/regex/latest/regex/struct.Regex.html#method.replace))\n\nThe logic for choosing the behavior is as follows:\n\n1. Check agains \"mapping\" if path needs to be replaced, if matched then continue to next step with new path after replacements otherwise continue as usual. 2. Check if one of the patterns match the file path, do the corresponding action. There's no specified order if two lists match the same path, we will use the first one (and we do not guarantee what is first).\n\n**Warning**: Specifying the same path in two lists is unsupported and can lead to undefined behaviour.\n\n3. There are pre-defined exceptions to the set FS mode. 1. Paths that match [the patterns defined here](https://github.com/metalbear-co/mirrord/tree/latest/mirrord/layer/src/file/filter/read_local_by_default.rs) are read locally by default. 2. Paths that match [the patterns defined here](https://github.com/metalbear-co/mirrord/tree/latest/mirrord/layer/src/file/filter/read_remote_by_default.rs) are read remotely by default when the mode is `localwithoverrides`. 3. Paths that match [the patterns defined here](https://github.com/metalbear-co/mirrord/tree/latest/mirrord/layer/src/file/filter/not_found_by_default.rs) under the running user's home directory will not be found by the application when the mode is not `local`.\n\nIn order to override that default setting for a path, or a pattern, include it the appropriate pattern set from above. E.g. in order to read files under `/etc/` remotely even though it is covered by [the set of patterns that are read locally by default](https://github.com/metalbear-co/mirrord/tree/latest/mirrord/layer/src/file/filter/read_local_by_default.rs), add `\"^/etc/.\"` to the `read_only` set.\n\n4. If none of the above match, use the default behavior (mode).\n\nFor more information, check the file operations [technical reference](https://mirrord.dev/docs/reference/fileops/).\n\n```json { \"feature\": { \"fs\": { \"mode\": \"write\", \"read_write\": \".+\\\\.json\" , \"read_only\": [ \".+\\\\.yaml\", \".+important-file\\\\.txt\" ], \"local\": [ \".+\\\\.js\", \".+\\\\.mjs\" ], \"not_found\": [ \"\\\\.config/gcloud\" ] } } } ```", "type": "object", "properties": { "local": { diff --git a/mirrord/config/src/feature/fs/advanced.rs b/mirrord/config/src/feature/fs/advanced.rs index feb15c6804d..9364e960758 100644 --- a/mirrord/config/src/feature/fs/advanced.rs +++ b/mirrord/config/src/feature/fs/advanced.rs @@ -33,17 +33,20 @@ use crate::{ /// 3. `"local"` - List of patterns that should be read locally. /// 4. `"not_found"` - List of patters that should never be read nor written. These files should be /// treated as non-existent. +/// 4. `"mapping"` - Map of patterns and their corresponding replacers. The replacement happens before any specific behavior as defined above or mode (uses [`Regex::replace`](https://docs.rs/regex/latest/regex/struct.Regex.html#method.replace)) /// /// The logic for choosing the behavior is as follows: /// -/// 1. Check if one of the patterns match the file path, do the corresponding action. There's +/// +/// 1. Check agains "mapping" if path needs to be replaced, if matched then continue to next step with new path after replacements otherwise continue as usual. +/// 2. Check if one of the patterns match the file path, do the corresponding action. There's /// no specified order if two lists match the same path, we will use the first one (and we /// do not guarantee what is first). /// /// **Warning**: Specifying the same path in two lists is unsupported and can lead to undefined /// behaviour. /// -/// 2. There are pre-defined exceptions to the set FS mode. +/// 3. There are pre-defined exceptions to the set FS mode. /// 1. Paths that match [the patterns defined here](https://github.com/metalbear-co/mirrord/tree/latest/mirrord/layer/src/file/filter/read_local_by_default.rs) /// are read locally by default. /// 2. Paths that match [the patterns defined here](https://github.com/metalbear-co/mirrord/tree/latest/mirrord/layer/src/file/filter/read_remote_by_default.rs) @@ -57,7 +60,7 @@ use crate::{ /// though it is covered by [the set of patterns that are read locally by default](https://github.com/metalbear-co/mirrord/tree/latest/mirrord/layer/src/file/filter/read_local_by_default.rs), /// add `"^/etc/."` to the `read_only` set. /// -/// 3. If none of the above match, use the default behavior (mode). +/// 4. If none of the above match, use the default behavior (mode). /// /// For more information, check the file operations /// [technical reference](https://mirrord.dev/docs/reference/fileops/).