BoardConfig.mk

#
# Copyright 2017 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

# This contains the module build definitions for the hardware-specific
# components for this device.
#
# As much as possible, those components should be built unconditionally,
# with device-specific names to avoid collisions, to avoid device-specific
# bitrot and build breakages. Building a component unconditionally does
# *not* include it on all devices, so it is safe even with hardware-specific
# components.

DEVICE_PATH := device/lenovo/9707F

include $(DEVICE_PATH)/device-version.mk

# Architecture
TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-2a
TARGET_CPU_ABI := arm64-v8a
TARGET_CPU_ABI2 :=
#changing 3 lines as per stock BoardConfig
#TARGET_CPU_VARIANT := cortex-a75
TARGET_CPU_VARIANT := generic
TARGET_CPU_VARIANT_RUNTIME := generic

TARGET_2ND_ARCH := arm
#changing 2 lines as per stock BoardConfig
#TARGET_2ND_ARCH_VARIANT := armv8-2a
TARGET_2ND_ARCH_VARIANT := armv7-a-neon
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi
#changing 3 lines as per stock BoardConfig
#TARGET_2ND_CPU_VARIANT := cortex-a75
TARGET_2ND_CPU_VARIANT := generic
TARGET_2ND_CPU_VARIANT_RUNTIME := cortex-a9

# MY ADD
# APEX
OVERRIDE_TARGET_FLATTEN_APEX := true

TARGET_USES_64_BIT_BINDER := true
TARGET_SUPPORTS_64_BIT_APPS := true

ENABLE_CPUSETS := true
ENABLE_SCHEDBOOST := true

# Bootloader
TARGET_BOOTLOADER_BOARD_NAME := kona
TARGET_NO_BOOTLOADER := true
TARGET_USES_UEFI := true

# MY ADD
# Display
TARGET_SCREEN_DENSITY := 400

# Kernel
BOARD_BOOT_HEADER_VERSION := 2
BOARD_KERNEL_BASE          := 0x00000000
# Changing the cmdline to the stock cmdline
#BOARD_KERNEL_CMDLINE := \
#    androidboot.console=ttyMSM0 \
#    androidboot.hardware=qcom \
#    androidboot.memcg=1 \
#    androidboot.usbcontroller=a600000.dwc3 \
#    lpm_levels.sleep_disabled=1 \
#    msm_rtb.filter=0x237 \
#    firmware_class.path=/vendor/firmware_mnt/image \
#    service_locator.enable=1 \
#    swiotlb=2048 \
#    video=vfb:640x400,bpp=32,memsize=3072000
BOARD_KERNEL_CMDLINE := console=ttyMSM0,115200n8 \
			earlycon=msm_geni_serial,0xa90000 \
			androidboot.hardware=qcom \
			androidboot.console=ttyMSM0 \
			androidboot.memcg=1 \
			lpm_levels.sleep_disabled=1 \
			video=vfb:640x400,bpp=32,memsize=3072000 \
			msm_rtb.filter=0x237 \
			service_locator.enable=1 \
			androidboot.usbcontroller=a600000.dwc3 \
			swiotlb=2048 \
			loop.max_part=7 \
			cgroup.memory=nokmem,nosocket \
			reboot=panic_warm \
			buildvariant=user

BOARD_KERNEL_PAGESIZE := 4096
BOARD_RAMDISK_OFFSET       := 0x01000000
BOARD_KERNEL_TAGS_OFFSET   := 0x00000100

# Following lines not in stock
TARGET_KERNEL_ARCH := arm64
TARGET_NO_KERNEL := false

# Original order & flags
#BOARD_KERNEL_OFFSET        := 0x00008000
#BOARD_KERNEL_SECOND_OFFSET := 0x00000000  # MY CHANGE from 0x00f00000 (from carliv kitchen unpack)
#BOARD_DTB_OFFSET           := 0x01f00000
#BOARD_MKBOOTIMG_ARGS += --base $(BOARD_KERNEL_BASE)
#BOARD_MKBOOTIMG_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE)
#BOARD_MKBOOTIMG_ARGS += --ramdisk_offset $(BOARD_RAMDISK_OFFSET)
#BOARD_MKBOOTIMG_ARGS += --tags_offset $(BOARD_KERNEL_TAGS_OFFSET)
#BOARD_MKBOOTIMG_ARGS += --kernel_offset $(BOARD_KERNEL_OFFSET)
#BOARD_MKBOOTIMG_ARGS += --second_offset $(BOARD_KERNEL_SECOND_OFFSET)
#BOARD_MKBOOTIMG_ARGS += --dtb_offset $(BOARD_DTB_OFFSET)
#BOARD_MKBOOTIMG_ARGS += --header_version $(BOARD_BOOT_HEADER_VERSION)
#BOARD_MKBOOTIMG_ARGS += --dtb $(TARGET_PREBUILT_DTB)
# New order & flags as in stock
BOARD_MKBOOTIMG_ARGS += --header_version $(BOARD_BOOT_HEADER_VERSION)
BOARD_MKBOOTIMG_ARGS += --ramdisk_offset $(BOARD_RAMDISK_OFFSET)
BOARD_MKBOOTIMG_ARGS += --tags_offset $(BOARD_KERNEL_TAGS_OFFSET)
BOARD_KERNEL_IMAGE_NAME := kernel
# Added following 2 lines from stock
TARGET_KERNEL_CONFIG := TB-9707F_defconfig
TARGET_KERNEL_SOURCE := kernel/lenovo/TB-9707F

# Kernel - prebuilt
TARGET_PREBUILT_KERNEL := $(DEVICE_PATH)/prebuilt/kernel
TARGET_PREBUILT_DTB := $(DEVICE_PATH)/prebuilt/dtb.img
BOARD_PREBUILT_DTBOIMAGE := $(DEVICE_PATH)/prebuilt/dtbo.img
BOARD_MKBOOTIMG_ARGS += --dtb $(TARGET_PREBUILT_DTB)
# Following line not in stock
BOARD_INCLUDE_RECOVERY_DTBO := true

# Partitions
BOARD_FLASH_BLOCK_SIZE := 262144 # (BOARD_KERNEL_PAGESIZE * 64)
BOARD_BOOTIMAGE_PARTITION_SIZE := 104857600
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 104857600
BOARD_HAS_LARGE_FILESYSTEM := true
BOARD_SYSTEMIMAGE_PARTITION_TYPE := ext4
BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE := ext4
# Workaround for error copying vendor files to recovery ramdisk
BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
TARGET_COPY_OUT_VENDOR := vendor
BOARD_SUPER_PARTITION_SIZE := 9126805504
BOARD_SUPER_PARTITION_GROUPS := lenovo_dynamic_partitions
BOARD_LENOVO_DYNAMIC_PARTITIONS_PARTITION_LIST := \
    system \
    system_ext \
    vendor \
    product \
    odm
BOARD_LENOVO_DYNAMIC_PARTITIONS_SIZE := 91226112200
# Following 3 lines not in stock
BOARD_SYSTEMIMAGE_JOURNAL_SIZE := 0
BOARD_SYSTEMIMAGE_EXTFS_INODE_COUNT := 4096
# Comment out 2023/11/8
#BOARD_USES_PRODUCTIMAGE := true

# Platform
TARGET_BOARD_PLATFORM := kona
# Following 3 lines not in stock
TARGET_BOARD_PLATFORM_GPU := qcom-adreno650
TARGET_USES_HARDWARE_QCOM_BOOTCTRL := true
QCOM_BOARD_PLATFORMS += kona

# fstab
TARGET_RECOVERY_FSTAB := $(DEVICE_PATH)/recovery.fstab

# Partition Info
# Not in stock
BOARD_BUILD_SYSTEM_ROOT_IMAGE := false


# Partitions (listed in the file) to be wiped under recovery.
TARGET_RECOVERY_WIPE := $(DEVICE_PATH)/recovery.wipe


# Recovery
TARGET_RECOVERY_PIXEL_FORMAT := "RGBX_8888"
TARGET_USERIMAGES_USE_EXT4 := true
TARGET_USERIMAGES_USE_F2FS := true
# Following lines not in stock
BOARD_HAS_NO_SELECT_BUTTON := true
BOARD_SUPPRESS_SECURE_ERASE := true
TARGET_NO_RECOVERY := false
TARGET_RECOVERY_DEVICE_MODULES += \
    android.hidl.base@1.0 \
    ashmemd \
    ashmemd_aidl_interface-cpp \
    bootctrl.$(TARGET_BOARD_PLATFORM).recovery \
    libashmemd_client \
    libcap \
    libion \
    libpcrecpp \
    libxml2

# Use mke2fs to create ext4 images
TARGET_USES_MKE2FS := true

# Following lines added from stock for now commenting out
## Verified Boot
#BOARD_AVB_ENABLE := true
#BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --flags 3

# Encryption
# Changed following line to stock
#PLATFORM_VERSION := 127
PLATFORM_VERSION := 16.1.0
PLATFORM_VERSION_LAST_STABLE := $(PLATFORM_VERSION)
PLATFORM_SECURITY_PATCH := 2099-12-31
VENDOR_SECURITY_PATCH := 2099-12-31
# Following lines not in stock
TW_INCLUDE_CRYPTO := true
TW_INCLUDE_CRYPTO_FBE := true
TW_INCLUDE_FBE_METADATA_DECRYPT := true
BOARD_USES_METADATA_PARTITION := true
BOARD_USES_QCOM_FBE_DECRYPTION := true
PRODUCT_ENFORCE_VINTF_MANIFEST := true

# Extras
TARGET_SYSTEM_PROP += $(DEVICE_PATH)/system.prop
TW_INCLUDE_RESETPROP := true
TW_INCLUDE_REPACKTOOLS := false
# From stock it is set to true
#TW_INCLUDE_REPACKTOOLS := true

# TWRP specific build flags

#TW_THEME := portrait_hdpi
#RECOVERY_TOUCHSCREEN_SWAP_XY := true
#RECOVERY_TOUCHSCREEN_FLIP_Y := true
ifeq ($(USE_LANDSCAPE),true)
	RECOVERY_TOUCHSCREEN_FLIP_Y := true
	RECOVERY_TOUCHSCREEN_SWAP_XY := true
	TW_THEME := landscape_hdpi
#	TARGET_RECOVERY_DENSITY := xxhdpi
	TW_ROTATION := 90
#	DEVICE_RESOLUTION := 2560x1600
else
	RECOVERY_TOUCHSCREEN_FLIP_Y := false
	RECOVERY_TOUCHSCREEN_SWAP_XY := false
	TW_THEME := portrait_hdpi
#	TARGET_RECOVERY_DENSITY := xxhdpi
	TW_ROTATION := 0
#	DEVICE_RESOLUTION := 1600x2560
endif

TW_EXTRA_LANGUAGES := true
# Added following line from stock
TW_SCREEN_BLANK_ON_BOOT := true
TW_INPUT_BLACKLIST := "hbtp_vm"
TW_USE_TOOLBOX := true
# The rest of the lines are not in stock
TARGET_RECOVERY_QCOM_RTC_FIX := true
TARGET_USE_CUSTOM_LUN_FILE_PATH := /config/usb_gadget/g1/functions/mass_storage.0/lun.%d/file
TW_BRIGHTNESS_PATH := "/sys/class/backlight/panel0-backlight/brightness"
TW_DEFAULT_BRIGHTNESS :=  100
TW_EXCLUDE_DEFAULT_USB_INIT := true
TW_EXCLUDE_ENCRYPTED_BACKUPS := false
TW_EXCLUDE_TWRPAPP := true
TW_HAS_EDL_MODE := true
TW_INCLUDE_NTFS_3G := true
TW_NO_BIND_SYSTEM := true
TW_NO_EXFAT_FUSE := true
TW_RECOVERY_ADDITIONAL_RELINK_BINARY_FILES += \
    $(TARGET_OUT_EXECUTABLES)/ashmemd \
    $(TARGET_OUT_EXECUTABLES)/strace
TW_RECOVERY_ADDITIONAL_RELINK_LIBRARY_FILES += \
    $(TARGET_OUT_SHARED_LIBRARIES)/android.hidl.base@1.0.so \
    $(TARGET_OUT_SHARED_LIBRARIES)/ashmemd_aidl_interface-cpp.so \
    $(TARGET_OUT_SHARED_LIBRARIES)/libashmemd_client.so \
    $(TARGET_OUT_SHARED_LIBRARIES)/libcap.so \
    $(TARGET_OUT_SHARED_LIBRARIES)/libion.so \
    $(TARGET_OUT_SHARED_LIBRARIES)/libpcrecpp.so \
    $(TARGET_OUT_SHARED_LIBRARIES)/libxml2.so

# Added the following to see if it sets the backup path.
TW_STORAGE_PATH := /external_sd

# TWRP Debug Flags
TARGET_USES_LOGD := true
TWRP_EVENT_LOGGING := false
TWRP_INCLUDE_LOGCAT := true
TARGET_RECOVERY_DEVICE_MODULES += debuggerd
TW_RECOVERY_ADDITIONAL_RELINK_FILES += $(TARGET_OUT_EXECUTABLES)/debuggerd
BOARD_RAMDISK_USE_LZMA := true