[Bug]: USB tethering does not work on Clone Type 3 Panel 1

[ramithu2024-blip]

Pre-submission checklist

• I am using the latest version of the project
• I have searched existing issues to make sure this is not a duplicate
• I have provided a screenshot from the DTB detection tool at https://lcdyk0517.github.io/dtbTools.html
• I have described which DTB I selected in the issue

Firmware Type

arkos4clone

Version

07112026

DTB File

R36S Clone -> Type 3 Panel 1

DTB Detection Screenshot

The DTB detection screenshot is unavailable. The device was previously identified as R36S Clone -> Type 3 Panel 1 using the DTB detection tool.

Console Output / Error

USB tethering diagnostic results:

• Android phone detects the USB connection.
• USB tethering can be enabled on the phone.
• No working network connection appears on ArkOS4Clone.

Original factory firmware supported USB tethering on this same device.

Bug Description

USB tethering does not work on my Clone Type 3 Panel 1 device with ArkOS4Clone.

The phone detects the R36S connection and allows USB tethering to be enabled, but the R36S does not get an internet connection.

The same phone and cable work correctly for USB tethering with Ubuntu Linux, and the original factory firmware for this device also supported USB tethering.

Steps to Reproduce

1. Flash ArkOS4Clone-07112026.img to an SD card.
2. Boot the R36S clone (Clone Type 3 Panel 1).
3. Connect an Android phone to the OTG USB-C port using a USB-C data cable.
4. Enable USB tethering on the phone.
5. Check network status on the R36S.
6. No internet connection is available.

Expected Behavior (Optional)

USB tethering should create a network connection and provide internet access from the Android phone.

Screenshots / Video / Logs (Optional)

No response

Additional Context (Optional)

No response

[igorek99909]

Exact same thing happens on my R36s (Clone Type 2 Without Amplifier). I'm using the same cable i used on original firmware and it was working correctly but on both v07062026 and v08152026 it doesn't even allow tethering to be enabled wifi adapters that worked previously also don't work and it might an OTG port issue.