[Bug]: Can't connect to wifi using TP-Link T2U Nano (RTL8811AU)

[max20091]

Pre-submission checklist

• I am using the latest version of the project
• I have searched existing issues to make sure this is not a duplicate
• I have provided a screenshot from the DTB detection tool at https://lcdyk0517.github.io/dtbTools.html
• I have described which DTB I selected in the issue

Firmware Type

arkos4clone

Version

ArkOS4Clone-20260711

DTB File

HG36

DTB Detection Screenshot

Console Output / Error

No console output

Bug Description

Very unstable wifi connection.
Wifi usually fail with "No wifi networks found" when scanning wifi, failed connect to AP with "the device is unmanaged because the link is not initialized by udev", or no ip address when connected to AP.
The OTG also get overheated when connected to AP with no ip address.

Steps to Reproduce

1. Boot with wifi usb plugged in.
2. Tries to connect to wifi and failed because reasons above.

Expected Behavior (Optional)

Should grant ip address and connect to internet normally. I tried with an Android phone tethering, the HG36 gets ip and internet access properly.

Screenshots / Video / Logs (Optional)

No response

Additional Context (Optional)

No idea if this is because my R36S clone is much different than normal. I have a EmuElec "Sticker" Clone with the same looking board, except this one has 384MB RAM and doesn't come with SD card when purchased.

Also tried dArkOS4Clone and also not working.

eMMC dump from my board:
Output.zip

[lcdyk0517]

Under the ports directory, create a script that contains dmesg > /roms/dmesg.txt. Then, after inserting the WiFi card, wait about 1 minute, run the script, and shut down. Send me the dmesg.txt file so I can take a look.

[max20091]

dmesg.txt

[SpudsterZ]

FWIW, I can confirm this behavior with an R36 Max and an older version of the firmware. Having upgraded to the Max2, I no longer have that hardware.

[max20091]

dmesg.txt

The last dmesg I uploaded was from darkos4clone, this one is from ArkOS4Clone-20260805.

I read the dmesg and seems like it load wrong driver. Checked the /lib/firmware/ and no RTL8811AU driver either.