usb.c

/* This file is part of ukbdc.
 *
 * ukbdc is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * ukbdc is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with ukbdc; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */

#include "auxiliary.h"
#include "usb.h"
#include "usb_config.h"
#include "descriptors.h"
#include "platforms.h"
#include "system.h"

#include <stdint.h>
#include <avr/interrupt.h>

/* current USB configuration chosen by host (0 means no config chosen yet) */
static volatile uint8_t usb_current_conf = 0;
static volatile bool usb_sleeping = false;
static volatile uint16_t status = 0x0000;

/* [Public API section] ---------------------------------------------------- */

/* initialize USB */
void USB_init()
{
	USB_set_pads_regulator(true);
	USB_pll_config(CRYSTAL_16MHZ);
	/* wait for PLL to lock to the clock */
        while (!PLL_is_locked())
		;
        USB_enable();
	/* make sure DETACH is off, and low speed mode is not set */
#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega32U2__)
	UDCON &= ~(_BV(DETACH));
#else
	UDCON &= ~(_BV(DETACH) | _BV(LSM));
#endif
	usb_current_conf = 0;
        UDIEN = _BV(EORSTE) | _BV(EORSME) | _BV(SOFE);
	sei();
	while (USB_get_configuration() == 0)
		;
	/* enable USB suspend interrupt */
	UDIEN |= _BV(SUSPE);
}

/* deinitialize USB */
void USB_close()
{
        UDIEN &= ~(_BV(EORSTE) | _BV(SOFE));
	usb_current_conf = 0;
	UDCON |= _BV(DETACH);
        USB_disable();
	USB_set_pads_regulator(false);
}

/* return 0 if the USB is not configured, or the configuration number
 * selected by the HOST */
uint8_t USB_get_configuration()
{
	return usb_current_conf;
}

/* return true if the computer is in sleep mode */
bool USB_is_sleeping()
{
	return usb_sleeping;
}

/* send remote wakeup to the computer */
void USB_wakeup()
{
	if (USB_is_sleeping()) {
		UDCON |= _BV(RMWKUP);
		while (bit_is_set(UDCON, RMWKUP))
			;
		while (USB_is_sleeping())
			;
	}
}

/* [/Public API section] --------------------------------------------------- */

/* [Interrupt handlers section] -------------------------------------------- */

/* USB Device Interrupt
 * This currently handles USB End Of Reset and Start Of Frame */
ISR(USB_GEN_vect)
{
	uint8_t prev_endp = USB_get_endpoint();
        uint8_t device_int_flags = UDINT;
	/* clear all device interrupt flags */
	UDINT = 0x00;
        if (device_int_flags & _BV(EORSTI)) {
		/* on end of reset configure endpoint 0 */
		USB_configure_endpoint(0);
		usb_current_conf = 0;
		goto end;
        }
	if (device_int_flags & _BV(SOFI) && usb_current_conf) {
		SYSTEM_publish_message(USB_SOF, 0, NULL);
	}
	if (device_int_flags & _BV(SUSPI)) {
		usb_sleeping = true;
	}
	if (device_int_flags & _BV(EORSMI)) {
		usb_sleeping = false;
	}
end:
	USB_set_endpoint(prev_endp);
}

static void serve_get_descriptor(uint16_t wValue, uint16_t wIndex, uint16_t wLength)
{
	for (uint8_t i = 0; i < NUM_DESC_LIST; ++i) {
		uint16_t cur_wValue = get_pgm_struct_field(&desc_list[i], wValue);
		uint16_t cur_wIndex = get_pgm_struct_field(&desc_list[i], wIndex);
		if (cur_wValue == wValue && cur_wIndex == wIndex) {
			/* enable interrupts to handle reset in the middle of sending a
			 * descriptor during enumeration */
			uint8_t sreg = SREG;
			sei();
			bool status = USB_write_blob(
					get_pgm_struct_field(&desc_list[i], addr),
					wLength,
					ENDPOINT0_SIZE, true /* from progmem */
			);
			if (status)
				USB_control_read_complete_status_stage();
			SREG = sreg;
			return;
		}
	}
	USB_stall_endpoint();
}

/* Processes Standard Device Requests. Returns true on no error, false if the
 * request couldn't be processed or is not supported */
/* static inline just for size optimization */
static inline bool process_standard_device_requests(struct setup_packet *s)
{
	if (request(s, SET_ADDRESS)) {
		USB_set_addr((uint8_t)s->wValue);
		USB_control_write_complete_status_stage();
		/* make sure the status stage is over before enabling
		 * the new address */
		USB_wait_IN();
		USB_addr_enable();
	} else if (request(s, SET_CONFIGURATION)) {
		usb_current_conf = s->wValue;
		USB_control_write_complete_status_stage();
		for (uint8_t i = 1; i < NUM_ENDPOINTS; ++i) {
			if (!USB_configure_endpoint(i))
				return false;
			USB_reset_endpoint_fifo(KEYBOARD_ENDPOINT);
		}
	} else if (request(s, GET_CONFIGURATION)) {
		USB_wait_IN();
		USB_IN_write_byte(usb_current_conf);
		USB_flush_IN();
		USB_control_read_complete_status_stage();
	} else if (request(s, GET_STATUS)) {
		USB_wait_IN();
		/* bus powered, no remote wakeup */
		USB_IN_write_word(0x0000);
		USB_flush_IN();
		USB_control_read_complete_status_stage();
	} else if (request(s, GET_DESCRIPTOR)) {
		serve_get_descriptor(s->wValue, s->wIndex, s->wLength);
	} else if (request(s, SET_FEATURE) &&
			s->wValue == DEVICE_REMOTE_WAKEUP) {
		status |= 0x0002;
	} else if (request(s, CLEAR_FEATURE) &&
			s->wValue == DEVICE_REMOTE_WAKEUP) {
		status &= ~0x0002;
	} else {
		return false;
	}
	return true;
}

/* Processes Standard Endpoint Requests. Returns true on no error, false if the
 * request couldn't be processed or is not supported */
/* static inline just for size optimization */
static inline bool process_standard_endpoint_requests(struct setup_packet *s)
{
	if (request(s, GET_STATUS)) {
		USB_wait_IN();
		USB_set_endpoint(s->wIndex);
		uint8_t status = USB_endpoint_stalled() ? 0x01 : 0x00;
		USB_set_endpoint(0);
		USB_IN_write_word((uint16_t)status);
		USB_flush_IN();
		USB_control_read_complete_status_stage();
	} else if ((request(s, CLEAR_FEATURE) || request(s, SET_FEATURE))
			&& s->wValue == ENDPOINT_HALT) {
		uint16_t i = s->wIndex & 0x7F;
		if (i >= 1 && i < NUM_ENDPOINTS) {
			USB_control_write_complete_status_stage();
			USB_set_endpoint(i);
			if (request(s, SET_FEATURE)) {
				USB_stall_endpoint();
			} else {
				USB_unstall_endpoint();
				USB_reset_endpoint_fifo(i);
			}
			USB_set_endpoint(0);
		} else {
			return false;
		}
	} else {
		return false;
	}
	return true;
}

/* Processes Standard Interface Requests. Returns true on no error, false if the
 * request couldn't be processed or is not supported */
/* static inline just for size optimization */
static inline bool process_standard_interface_requests(struct setup_packet *s)
{
	if (request(s, GET_DESCRIPTOR)) {
		serve_get_descriptor(s->wValue, s->wIndex, s->wLength);
	} else {
		return false;
	}
	return true;
}

/* Processes Class Interface Requests. Returns true on no error, false if the
 * request couldn't be processed or is not supported. Actual processing is
 * performed using interface request handlers */
/* static inline just for size optimization */
static inline bool process_class_interface_requests(struct setup_packet *s)
{
	bool found = false;
	for (uint8_t i = 0; i < NUM_INTERFACE_REQUEST_HANDLERS; ++i) {
		if (get_pgm_struct_field(&iface_req_handlers[i], iface_num) ==
				(s->wIndex & 0xFF)) {
			interface_request_handler_fun handler = (void*)(uint16_t)
				get_pgm_struct_field(&iface_req_handlers[i], f);
			found = (*handler)(s);
			break;
		}
	}
	if (!found)
		return false;
	if (request_type(s, DIRECTION, DEVICE_TO_HOST))
		USB_control_read_complete_status_stage();
	else
		USB_control_write_complete_status_stage();
	return true;
}

static inline void handle_setup_packet()
{
	bool all_ok = false;
	struct setup_packet s;
	USB_OUT_read_buffer(&s, 8);
	/* acknowledge setup *after* reading, because it clears the bank */
	USB_ack_SETUP();
	/* process all Standard Device Requests */
	if        (request_type(&s, TYPE | RECIPIENT, STANDARD | DEVICE)) {
		all_ok = process_standard_device_requests(&s);
	} else if (request_type(&s, TYPE | RECIPIENT, STANDARD | INTERFACE)) {
		all_ok = process_standard_interface_requests(&s);
	} else if (request_type(&s, TYPE | RECIPIENT, STANDARD | ENDPOINT)) {
		all_ok = process_standard_endpoint_requests(&s);
	} else if (request_type(&s, TYPE | RECIPIENT, CLASS    | INTERFACE)) {
		all_ok = process_class_interface_requests(&s);
	}
	if (!all_ok)
		USB_stall_endpoint();
}

/* Handle USB events */
#define ENDPOINT_EVENTS (_BV(RXOUTI) | _BV(TXINI) | _BV(STALLEDI) | _BV(NAKOUTI) | _BV(NAKINI))
ISR(USB_COM_vect)
{
	uint8_t prev_endp = USB_get_endpoint();
        USB_set_endpoint(0);
        if (bit_is_set(UEINTX, RXSTPI)) {
		handle_setup_packet();
		goto end;
	}
	for (int i = 0; i < NUM_ENDPOINT_INTERRUPT_HANDLERS; ++i) {
		uint8_t endpoint_number = get_pgm_struct_field(
				&endpoint_int_handlers[i], endpoint_num);
		USB_set_endpoint(endpoint_number);
		if (UEINTX & ENDPOINT_EVENTS) {
			void (*fun)(uint8_t flags) = (void*)(uint16_t)
				get_pgm_struct_field(&endpoint_int_handlers[i], f);
			(*fun)(UEINTX);
		}
	}
end:
	USB_set_endpoint(prev_endp);
}

/* [/Interrupt handlers section] ------------------------------------------- */