Wechselrichter bleibt im StandBy (gelb) #645

chrisli01 · 2024-02-08T08:14:47Z

chrisli01
Feb 8, 2024

Guten Morgen,

habe DTU mit neuestem OnBattery, was auch recht gut funktioniert.
ABER leider bleibt der geregelte Wechselrichter oft im Standby/gelb obwohl Leistung benötigt würde.

Fotos sind im Anhang, hoffe ihr könnt mir helfen.

sag schon einmal DANKESCHÖN

schlimmchen · 2024-02-08T08:24:11Z

schlimmchen
Feb 8, 2024
Maintainer

Danke für die aussagekränftigen Screenshots. Allerdings würde ich hier auch Auszüge aus der Konsole erbitten, denn bisher ist mir nur klar, dass etwas merkwürdig ist, aber nicht, was es sein könnte. Zum Zeitpunkt wenn der Inverter gelb ist, obwohl du dir sicher bist, dass der DPL ihn produzieren lassen sollte.

Ist der Inverter oft rot, also nicht erreichbar? (Könnte darauf hindeuten, dass Kommandos verloren gehen weil die Funkstrecke schlecht ist)

0 replies

chrisli01 · 2024-02-08T09:01:27Z

chrisli01
Feb 8, 2024
Author

Vielen Dank für die schnelle Antwort!
Habe es jetzt 10x mit Warmwasserboiler getestet und hat natürich immer funktioniert! :-(

ich beobachte recht viel, WR war noch nie rot.
DTU steht 5m vom WR entfernt, nur ein Fenster „dazwischen“.

0 replies

schlimmchen · 2024-02-08T09:47:25Z

schlimmchen
Feb 8, 2024
Maintainer

Also es gibt sehr viele Gründe, warum der DPL den WR ausschaltet. Der Log in der Konsole wird sagen, welcher Grund es war.

Dennoch sollte natürlich der DPL den WR auch wieder einschalten, wenn das "Problem" beseitigt ist. Wenn das bei dir nicht zuverlässig funktioniert, ist das doof. Aber wie gesagt: Hier ist die Ausgabe der Konsole echt wichtig um weiterzukommen.

0 replies

chrisli01 · 2024-02-08T10:13:25Z

chrisli01
Feb 8, 2024
Author

Jetzt aber….

Websocket: [/livedata][21] disconnect
11:12:11.515 > PowerMeterClass: TotalPower: -111.70
11:12:11.867 > [DPL::loop] ******************* ENTER **********************
11:12:12.042 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15131 s
11:12:12.086 > [DPL::loop] dcVoltage: 36.40 V, loadCorrectedVoltage: 36.40 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:12.138 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:12.189 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:12.233 > [DPL::loop] battery discharging allowed, PowerMeter: -112 W, target consumption: -100 W
11:12:12.275 > [DPL::loop] ******************* Leaving PL, calculated limit: -12 W, requested limit: 124 W (kept last requested)
11:12:12.311 > Fetch inverter: 114483761097
11:12:12.353 > TX RealTimeRunData 865.00 MHz --> 15 83 76 10 97 80 10 26 80 80 0B 00 65 C4 A8 FC 00 00 00 00 00 00 00 00 19 12 24
11:12:12.396 > Interrupt received
11:12:12.448 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 01 00 01 01 37 01 38 01 59 01 62 04 32 04 54 00 00 83 | -57 dBm
11:12:12.494 > Interrupt received
11:12:12.534 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 02 72 82 00 00 89 9A 02 2D 02 26 09 2B 13 87 08 13 96 | -57 dBm
11:12:12.574 > Interrupt received
11:12:12.616 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 83 00 01 00 58 03 E7 01 58 00 02 73 FD 3A | -57 dBm
11:12:12.802 > RX Period End
11:12:12.934 > Success
11:12:13.023 > [DPL::loop] ******************* ENTER **********************
11:12:13.066 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15132 s
11:12:13.114 > [DPL::loop] dcVoltage: 36.40 V, loadCorrectedVoltage: 36.40 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:13.154 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:13.202 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:13.250 > [DPL::loop] battery discharging allowed, PowerMeter: -117 W, target consumption: -100 W
11:12:13.306 > [ 15132.428] DPL: the system is stable, the last power limit is still valid
11:12:13.354 > [DPL::loop] ******************* Leaving PL, calculated limit: -17 W, requested limit: 124 W (kept last requested)
11:12:14.211 > [DPL::loop] ******************* ENTER **********************
11:12:14.254 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15133 s
11:12:14.296 > [DPL::loop] dcVoltage: 36.40 V, loadCorrectedVoltage: 36.40 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:14.342 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:14.390 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:14.434 > [DPL::loop] battery discharging allowed, PowerMeter: -119 W, target consumption: -100 W
11:12:14.476 > [DPL::loop] ******************* Leaving PL, calculated limit: -19 W, requested limit: 124 W (kept last requested)
11:12:14.522 > Fetch inverter: 116491433252
11:12:14.568 > TX RealTimeRunData 865.00 MHz --> 15 91 43 32 52 80 10 26 80 80 0B 00 65 C4 A8 FE 00 00 00 00 00 00 00 00 79 0B 9F
11:12:14.717 > Interrupt received
11:12:14.754 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 01 00 01 01 6D 01 6D 00 02 00 01 00 08 00 06 00 00 1C | -35 dBm
11:12:14.796 > Interrupt received
11:12:14.844 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 02 8A 90 00 00 4D 29 00 08 00 07 01 6E 01 6A 00 06 60 | -36 dBm
11:12:14.884 > Interrupt received
11:12:14.926 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 03 00 00 00 16 00 03 00 00 45 C5 00 00 BC 4C 00 05 72 | -36 dBm
11:12:14.976 > Interrupt received
11:12:15.026 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 04 00 04 09 30 13 87 00 00 00 00 00 00 00 00 00 83 3F | -37 dBm
11:12:15.074 > Interrupt received
11:12:15.116 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 85 00 13 A8 E2 CD | -37 dBm
11:12:15.170 > RX Period End
11:12:15.214 > Success
11:12:15.382 > [DPL::loop] ******************* ENTER **********************
11:12:15.424 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15134 s
11:12:15.528 > [DPL::loop] dcVoltage: 36.50 V, loadCorrectedVoltage: 36.50 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:15.564 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:15.604 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:15.646 > [DPL::loop] battery discharging allowed, PowerMeter: -126 W, target consumption: -100 W
11:12:15.696 > [DPL::loop] ******************* Leaving PL, calculated limit: -26 W, requested limit: 124 W (kept last requested)
11:12:16.229 > Fetch inverter: 114483761097
11:12:16.288 > TX RealTimeRunData 865.00 MHz --> 15 83 76 10 97 80 10 26 80 80 0B 00 65 C4 A9 00 00 00 00 00 00 00 00 00 D8 12 18
11:12:16.338 > Interrupt received
11:12:16.378 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 01 00 01 01 37 01 39 01 75 01 7E 04 8A 04 AE 00 00 F0 | -56 dBm
11:12:16.422 > Interrupt received
11:12:16.552 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 02 72 82 00 00 89 9A 02 2D 02 26 09 1F 13 88 08 BB 05 | -57 dBm
11:12:16.592 > [DPL::loop] ******************* ENTER **********************
11:12:16.634 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15135 s
11:12:16.682 > [DPL::loop] dcVoltage: 36.50 V, loadCorrectedVoltage: 36.50 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:16.726 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:16.781 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:16.825 > [DPL::loop] battery discharging allowed, PowerMeter: -128 W, target consumption: -100 W
11:12:16.864 > [DPL::loop] ******************* Leaving PL, calculated limit: -28 W, requested limit: 124 W (kept last requested)
11:12:16.906 > Interrupt received
11:12:16.954 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 83 00 01 00 5F 03 E7 01 58 00 02 B7 F3 F7 | -57 dBm
11:12:16.996 > RX Period End
11:12:17.044 > Success
11:12:17.702 > [DPL::loop] ******************* ENTER **********************
11:12:17.746 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15136 s
11:12:17.795 > [DPL::loop] dcVoltage: 36.50 V, loadCorrectedVoltage: 36.50 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:17.842 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:17.884 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:17.938 > [DPL::loop] battery discharging allowed, PowerMeter: -128 W, target consumption: -100 W
11:12:17.985 > [DPL::loop] ******************* Leaving PL, calculated limit: -28 W, requested limit: 124 W (kept last requested)
11:12:18.232 > Fetch inverter: 116491433252
11:12:18.295 > TX RealTimeRunData 865.00 MHz --> 15 91 43 32 52 80 10 26 80 80 0B 00 65 C4 A9 02 00 00 00 00 00 00 00 00 B8 0B A3
11:12:18.346 > Interrupt received
11:12:18.394 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 01 00 01 01 6D 01 6E 00 02 00 01 00 08 00 06 00 00 1F | -36 dBm
11:12:18.434 > Interrupt received
11:12:18.473 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 02 8A 90 00 00 4D 29 00 08 00 07 01 6E 01 6B 00 06 61 | -37 dBm
11:12:18.512 > Interrupt received
11:12:18.555 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 03 00 00 00 16 00 03 00 00 45 C5 00 00 BC 4C 00 05 72 | -37 dBm
11:12:18.596 > Interrupt received
11:12:18.649 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 04 00 04 09 25 13 88 00 00 00 00 00 00 00 00 00 83 25 | -37 dBm
11:12:18.694 > Interrupt received
11:12:18.734 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 85 00 13 39 3B 85 | -37 dBm
11:12:18.863 > [DPL::loop] ******************* ENTER **********************
11:12:18.913 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15138 s
11:12:18.953 > [DPL::loop] dcVoltage: 36.50 V, loadCorrectedVoltage: 36.50 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:19.001 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:19.051 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:19.101 > [DPL::loop] battery discharging allowed, PowerMeter: -131 W, target consumption: -100 W
11:12:19.185 > [DPL::loop] ******************* Leaving PL, calculated limit: -31 W, requested limit: 124 W (kept last requested)
11:12:19.227 > RX Period End
11:12:19.281 > Success
11:12:20.332 > [DPL::loop] ******************* ENTER **********************
11:12:20.433 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15139 s
11:12:20.473 > [DPL::loop] dcVoltage: 36.50 V, loadCorrectedVoltage: 36.50 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:20.509 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:20.557 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:20.607 > [DPL::loop] battery discharging allowed, PowerMeter: -131 W, target consumption: -100 W
11:12:20.655 > [DPL::loop] ******************* Leaving PL, calculated limit: -31 W, requested limit: 124 W (kept last requested)
11:12:20.699 > Fetch inverter: 114483761097
11:12:20.745 > TX RealTimeRunData 865.00 MHz --> 15 83 76 10 97 80 10 26 80 80 0B 00 65 C4 A9 04 00 00 00 00 00 00 00 00 18 20 EE
11:12:20.783 > Interrupt received
11:12:20.823 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 01 00 01 01 37 01 39 01 80 01 8A 04 AF 04 D7 00 00 AD | -59 dBm
11:12:20.867 > Interrupt received
11:12:20.913 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 02 72 82 00 00 89 9A 02 2D 02 26 09 1E 13 88 09 05 BB | -58 dBm
11:12:20.963 > Interrupt received
11:12:21.003 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 83 00 01 00 62 03 E7 01 58 00 02 EB 88 ED | -59 dBm
11:12:21.049 > RX Period End
11:12:21.103 > Success
11:12:21.211 > [DPL::loop] ******************* ENTER **********************
11:12:21.259 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15140 s
11:12:21.303 > [DPL::loop] dcVoltage: 36.50 V, loadCorrectedVoltage: 36.50 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:21.357 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:21.463 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:21.506 > [DPL::loop] battery discharging allowed, PowerMeter: -132 W, target consumption: -100 W
11:12:21.547 > [DPL::loop] ******************* Leaving PL, calculated limit: -32 W, requested limit: 124 W (kept last requested)
11:12:21.595 > PowerMeterClass: TotalPower: -135.02
11:12:22.296 > [DPL::loop] ******************* ENTER **********************
11:12:22.333 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15141 s
11:12:22.377 > [DPL::loop] dcVoltage: 36.50 V, loadCorrectedVoltage: 36.50 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:22.425 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:22.462 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:22.503 > [DPL::loop] battery discharging allowed, PowerMeter: -135 W, target consumption: -100 W
11:12:22.546 > [DPL::loop] ******************* Leaving PL, calculated limit: -35 W, requested limit: 124 W (kept last requested)
11:12:22.593 > Fetch inverter: 116491433252
11:12:22.636 > TX RealTimeRunData 865.00 MHz --> 15 91 43 32 52 80 10 26 80 80 0B 00 65 C4 A9 06 00 00 00 00 00 00 00 00 78 39 55
11:12:22.683 > Interrupt received
11:12:22.731 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 01 00 01 01 6E 01 6E 00 02 00 01 00 09 00 06 00 00 1D | -36 dBm
11:12:22.773 > Interrupt received
11:12:22.813 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 02 8A 90 00 00 4D 29 00 08 00 07 01 6E 01 6B 00 06 61 | -36 dBm
11:12:22.857 > Interrupt received
11:12:22.910 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 03 00 00 00 16 00 03 00 00 45 C5 00 00 BC 4C 00 05 72 | -36 dBm
11:12:22.957 > Interrupt received
11:12:23.007 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 04 00 04 09 29 13 88 00 00 00 00 00 00 00 00 00 83 29 | -36 dBm
11:12:23.052 > Interrupt received
11:12:23.095 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 85 00 13 87 5F 5F | -36 dBm
11:12:23.146 > RX Period End
11:12:23.197 > Success
11:12:23.243 > [ 15142.435] DPL: the system is stable, the last power limit is still valid
11:12:23.455 > [DPL::loop] ******************* ENTER **********************
11:12:23.493 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15142 s
11:12:23.535 > [DPL::loop] dcVoltage: 36.60 V, loadCorrectedVoltage: 36.60 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:23.573 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:23.626 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:23.813 > [DPL::loop] battery discharging allowed, PowerMeter: -123 W, target consumption: -100 W
11:12:23.853 > [DPL::loop] ******************* Leaving PL, calculated limit: -23 W, requested limit: 124 W (kept last requested)
11:12:24.309 > Fetch inverter: 114483761097
11:12:24.373 > TX RealTimeRunData 865.00 MHz --> 15 83 76 10 97 80 10 26 80 80 0B 00 65 C4 A9 08 00 00 00 00 00 00 00 00 18 75 B7
11:12:24.415 > Interrupt received
11:12:24.453 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 01 00 01 01 38 01 3A 01 91 01 9B 04 E4 05 0D 00 00 31 | -57 dBm
11:12:24.493 > Interrupt received
11:12:24.638 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 02 72 82 00 00 89 9B 02 2D 02 27 09 2B 13 88 09 6B E0 | -58 dBm
11:12:24.687 > [DPL::loop] ******************* ENTER **********************
11:12:24.733 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15143 s
11:12:24.772 > [DPL::loop] dcVoltage: 36.60 V, loadCorrectedVoltage: 36.60 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:24.813 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:24.856 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:24.903 > [DPL::loop] battery discharging allowed, PowerMeter: -134 W, target consumption: -100 W
11:12:24.949 > [DPL::loop] ******************* Leaving PL, calculated limit: -34 W, requested limit: 124 W (kept last requested)
11:12:24.994 > Interrupt received
11:12:25.034 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 83 00 02 00 66 03 E7 01 58 00 02 84 11 1C | -59 dBm
11:12:25.073 > RX Period End
11:12:25.113 > Success
11:12:25.781 > [DPL::loop] ******************* ENTER **********************
11:12:25.828 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15145 s
11:12:25.876 > [DPL::loop] dcVoltage: 36.60 V, loadCorrectedVoltage: 36.60 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:25.926 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:25.977 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:26.026 > [DPL::loop] battery discharging allowed, PowerMeter: -133 W, target consumption: -100 W
11:12:26.074 > [DPL::loop] ******************* Leaving PL, calculated limit: -33 W, requested limit: 124 W (kept last requested)
11:12:26.320 > Fetch inverter: 116491433252
11:12:26.374 > TX RealTimeRunData 865.00 MHz --> 15 91 43 32 52 80 10 26 80 80 0B 00 65 C4 A9 0A 00 00 00 00 00 00 00 00 78 6C 0C
11:12:26.422 > Interrupt received
11:12:26.464 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 01 00 01 01 6E 01 6E 00 02 00 01 00 09 00 06 00 00 1D | -37 dBm
11:12:26.506 > Interrupt received
11:12:26.558 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 02 8A 90 00 00 4D 29 00 08 00 07 01 6F 01 6B 00 05 63 | -37 dBm
11:12:26.603 > Interrupt received
11:12:26.644 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 03 00 00 00 15 00 03 00 00 45 C5 00 00 BC 4C 00 05 71 | -36 dBm
11:12:26.690 > Interrupt received
11:12:26.735 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 04 00 04 09 2D 13 88 00 00 00 00 00 00 00 00 00 83 2D | -36 dBm
11:12:26.788 > Interrupt received
11:12:26.832 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 85 00 13 29 94 3A | -35 dBm
11:12:26.936 > [DPL::loop] ******************* ENTER **********************
11:12:26.974 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15146 s
11:12:27.014 > [DPL::loop] dcVoltage: 36.60 V, loadCorrectedVoltage: 36.60 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:27.054 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:27.110 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:27.168 > [DPL::loop] battery discharging allowed, PowerMeter: -132 W, target consumption: -100 W
11:12:27.226 > [DPL::loop] ******************* Leaving PL, calculated limit: -32 W, requested limit: 124 W (kept last requested)
11:12:27.294 > RX Period End
11:12:27.346 > Success
11:12:28.091 > [DPL::loop] ******************* ENTER **********************
11:12:28.216 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15147 s
11:12:28.264 > [DPL::loop] dcVoltage: 36.60 V, loadCorrectedVoltage: 36.60 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:28.305 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:28.352 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:28.393 > [DPL::loop] battery discharging allowed, PowerMeter: -131 W, target consumption: -100 W
11:12:28.446 > [DPL::loop] ******************* Leaving PL, calculated limit: -31 W, requested limit: 124 W (kept last requested)
11:12:28.504 > Fetch inverter: 114483761097
11:12:28.560 > TX RealTimeRunData 865.00 MHz --> 15 83 76 10 97 80 10 26 80 80 0B 00 65 C4 A9 0C 00 00 00 00 00 00 00 00 D8 47 41
11:12:28.732 > Interrupt received
11:12:28.776 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 01 00 01 01 38 01 3A 01 84 01 8E 04 BB 04 E4 00 00 86 | -59 dBm
11:12:28.826 > Interrupt received
11:12:28.880 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 02 72 83 00 00 89 9B 02 2E 02 27 09 28 13 88 09 1D 97 | -59 dBm
11:12:28.932 > Interrupt received
11:12:28.984 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 83 00 01 00 63 03 E7 01 58 00 02 59 53 85 | -56 dBm
11:12:29.026 > RX Period End
11:12:29.078 > Success
11:12:29.278 > [DPL::loop] ******************* ENTER **********************
11:12:29.316 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15148 s
11:12:29.366 > [DPL::loop] dcVoltage: 36.60 V, loadCorrectedVoltage: 36.60 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:29.414 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:29.456 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:29.504 > [DPL::loop] battery discharging allowed, PowerMeter: -131 W, target consumption: -100 W
11:12:29.548 > [DPL::loop] ******************* Leaving PL, calculated limit: -31 W, requested limit: 124 W (kept last requested)
11:12:30.429 > [DPL::loop] ******************* ENTER **********************
11:12:30.464 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15149 s
11:12:30.504 > [DPL::loop] dcVoltage: 36.60 V, loadCorrectedVoltage: 36.60 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:30.541 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:30.582 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:30.630 > [DPL::loop] battery discharging allowed, PowerMeter: -132 W, target consumption: -100 W
11:12:30.673 > [DPL::loop] ******************* Leaving PL, calculated limit: -32 W, requested limit: 124 W (kept last requested)
11:12:30.714 > Fetch inverter: 116491433252
11:12:30.764 > TX RealTimeRunData 865.00 MHz --> 15 91 43 32 52 80 10 26 80 80 0B 00 65 C4 A9 0E 00 00 00 00 00 00 00 00 B8 5E FA
11:12:30.807 > Interrupt received
11:12:30.854 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 01 00 01 01 6E 01 6E 00 02 00 01 00 09 00 06 00 00 1D | -36 dBm
11:12:30.896 > Interrupt received
11:12:30.946 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 02 8A 90 00 00 4D 29 00 08 00 07 01 6E 01 6B 00 05 62 | -35 dBm
11:12:30.996 > Interrupt received
11:12:31.046 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 03 00 00 00 15 00 03 00 00 45 C5 00 00 BC 4C 00 05 71 | -34 dBm
11:12:31.092 > Interrupt received
11:12:31.132 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 04 00 04 09 30 13 88 00 00 00 00 00 00 00 00 00 83 30 | -35 dBm
11:12:31.176 > Interrupt received
11:12:31.224 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 85 00 13 8C 41 4A | -35 dBm
11:12:31.272 > RX Period End
11:12:31.322 > Success
11:12:31.586 > [DPL::loop] ******************* ENTER **********************
11:12:31.621 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15150 s
11:12:31.666 > [DPL::loop] dcVoltage: 36.60 V, loadCorrectedVoltage: 36.60 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:31.716 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:31.764 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:31.803 > [DPL::loop] battery discharging allowed, PowerMeter: -131 W, target consumption: -100 W
11:12:31.843 > [DPL::loop] ******************* Leaving PL, calculated limit: -31 W, requested limit: 124 W (kept last requested)
11:12:31.882 > PowerMeterClass: TotalPower: -131.07
11:12:32.450 > Fetch inverter: 114483761097
11:12:32.501 > TX RealTimeRunData 865.00 MHz --> 15 83 76 10 97 80 10 26 80 80 0B 00 65 C4 A9 10 00 00 00 00 00 00 00 00 18 DF 05
11:12:32.551 > Interrupt received
11:12:32.595 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 01 00 01 01 38 01 3A 01 87 01 92 04 C7 04 EF 00 00 EE | -58 dBm
11:12:32.659 > Interrupt received
11:12:32.703 > [DPL::loop] ******************* ENTER **********************
11:12:32.746 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15152 s
11:12:32.795 > [DPL::loop] dcVoltage: 36.60 V, loadCorrectedVoltage: 36.60 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:32.837 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:32.883 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:32.925 > [DPL::loop] battery discharging allowed, PowerMeter: -131 W, target consumption: -100 W
11:12:32.965 > [DPL::loop] ******************* Leaving PL, calculated limit: -31 W, requested limit: 124 W (kept last requested)
11:12:33.003 > Interrupt received
11:12:33.042 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 83 00 02 00 64 03 E7 01 58 00 02 71 CB 31 | -57 dBm
11:12:33.084 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 83 00 02 00 64 03 E7 01 58 00 02 71 CB 31 | -57 dBm
11:12:33.123 > RX Period End
11:12:33.166 > Middle missing
11:12:33.234 > Request retransmit: 2
11:12:33.272 > TX RequestFrame 865.00 MHz --> 15 83 76 10 97 80 10 26 80 82 D3
11:12:33.313 > [ 15152.471] DPL: the system is stable, the last power limit is still valid
11:12:33.356 > Interrupt received
11:12:33.406 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 02 72 83 00 00 89 9B 02 2E 02 27 09 2A 13 88 09 33 BB | -58 dBm
11:12:33.463 > RX Period End
11:12:33.505 > Success
11:12:33.823 > [DPL::loop] ******************* ENTER **********************
11:12:33.863 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15153 s
11:12:33.915 > [DPL::loop] dcVoltage: 36.60 V, loadCorrectedVoltage: 36.60 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:33.952 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:33.994 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:34.043 > [DPL::loop] battery discharging allowed, PowerMeter: -135 W, target consumption: -100 W
11:12:34.085 > [DPL::loop] ******************* Leaving PL, calculated limit: -35 W, requested limit: 124 W (kept last requested)
11:12:34.451 > Fetch inverter: 116491433252
11:12:34.507 > TX RealTimeRunData 865.00 MHz --> 15 91 43 32 52 80 10 26 80 80 0B 00 65 C4 A9 12 00 00 00 00 00 00 00 00 78 C6 BE
11:12:34.559 > Interrupt received
11:12:34.609 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 01 00 01 01 6E 01 6E 00 02 00 01 00 09 00 06 00 00 1D | -35 dBm
11:12:34.653 > Interrupt received
11:12:34.695 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 02 8A 90 00 00 4D 29 00 08 00 07 01 6F 01 6B 00 05 63 | -35 dBm
11:12:34.732 > Interrupt received
11:12:34.773 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 03 00 00 00 15 00 03 00 00 45 C5 00 00 BC 4C 00 05 71 | -35 dBm
11:12:34.817 > Interrupt received
11:12:34.863 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 04 00 04 09 32 13 88 00 00 00 00 00 00 00 00 00 83 32 | -35 dBm
11:12:34.908 > Interrupt received
11:12:34.955 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 85 00 13 21 CB 6D | -102 dBm
11:12:34.995 > [DPL::loop] ******************* ENTER **********************
11:12:35.035 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15154 s
11:12:35.087 > [DPL::loop] dcVoltage: 36.60 V, loadCorrectedVoltage: 36.60 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:35.135 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:35.179 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:35.222 > [DPL::loop] battery discharging allowed, PowerMeter: -136 W, target consumption: -100 W
11:12:35.266 > [DPL::loop] ******************* Leaving PL, calculated limit: -36 W, requested limit: 124 W (kept last requested)
11:12:35.312 > RX Period End
11:12:35.359 > Success
11:12:36.144 > [DPL::loop] ******************* ENTER **********************
11:12:36.183 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15155 s
11:12:36.225 > [DPL::loop] dcVoltage: 36.60 V, loadCorrectedVoltage: 36.60 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:36.277 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:36.323 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:36.363 > [DPL::loop] battery discharging allowed, PowerMeter: -140 W, target consumption: -100 W
11:12:36.443 > [DPL::loop] ******************* Leaving PL, calculated limit: -40 W, requested limit: 124 W (kept last requested)
11:12:36.493 > Fetch inverter: 114483761097
11:12:36.535 > TX RealTimeRunData 865.00 MHz --> 15 83 76 10 97 80 10 26 80 80 0B 00 65 C4 A9 14 00 00 00 00 00 00 00 00 D8 ED F3
11:12:36.579 > Interrupt received
11:12:36.623 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 01 00 01 01 38 01 3A 01 8E 01 99 04 DE 05 06 00 00 1D | -57 dBm
11:12:36.663 > Interrupt received
11:12:36.705 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 02 72 83 00 00 89 9B 02 2E 02 27 09 2E 13 88 09 5F D3 | -57 dBm
11:12:36.743 > Interrupt received
11:12:36.782 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 83 00 01 00 66 03 E7 01 58 00 02 EB 79 18 | -57 dBm
11:12:37.017 > RX Period End
11:12:37.060 > Success
11:12:37.479 > [DPL::loop] ******************* ENTER **********************
11:12:37.530 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15156 s
11:12:37.576 > [DPL::loop] dcVoltage: 36.60 V, loadCorrectedVoltage: 36.60 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:37.626 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:37.673 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:37.713 > [DPL::loop] battery discharging allowed, PowerMeter: -146 W, target consumption: -100 W
11:12:37.757 > [DPL::loop] ******************* Leaving PL, calculated limit: -46 W, requested limit: 124 W (kept last requested)
11:12:38.461 > Fetch inverter: 116491433252
11:12:38.662 > TX RealTimeRunData 865.00 MHz --> 15 91 43 32 52 80 10 26 80 80 0B 00 65 C4 A9 16 00 00 00 00 00 00 00 00 B8 F4 48
11:12:38.706 > [DPL::loop] ******************* ENTER **********************
11:12:38.753 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15157 s
11:12:38.794 > [DPL::loop] dcVoltage: 36.60 V, loadCorrectedVoltage: 36.60 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:38.835 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:38.884 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:38.925 > [DPL::loop] battery discharging allowed, PowerMeter: -162 W, target consumption: -100 W
11:12:38.974 > [DPL::loop] ******************* Leaving PL, calculated limit: -62 W, requested limit: 124 W (kept last requested)
11:12:39.017 > Interrupt received
11:12:39.063 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 01 00 01 01 6F 01 6F 00 02 00 01 00 09 00 06 00 00 1D | -34 dBm
11:12:39.106 > Interrupt received
11:12:39.284 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 04 00 04 09 37 13 89 00 00 00 00 00 00 00 00 00 83 36 | -34 dBm
11:12:39.323 > Interrupt received
11:12:39.366 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 85 00 13 63 DC 38 | -35 dBm
11:12:39.416 > RX Period End
11:12:39.495 > Middle missing
11:12:39.536 > Request retransmit: 2
11:12:39.584 > TX RequestFrame 865.00 MHz --> 15 91 43 32 52 80 10 26 80 82 13
11:12:39.626 > Interrupt received
11:12:39.676 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 02 8A 90 00 00 4D 29 00 08 00 07 01 6F 01 6B 00 05 63 | -37 dBm
11:12:39.739 > RX Period End
11:12:39.783 > Middle missing
11:12:39.824 > Request retransmit: 3
11:12:39.864 > TX RequestFrame 865.00 MHz --> 15 91 43 32 52 80 10 26 80 83 12
11:12:39.904 > Interrupt received
11:12:39.956 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 03 00 01 00 15 00 03 00 00 45 C5 00 00 BC 4C 00 05 70 | -36 dBm
11:12:40.012 > RX Period End
11:12:40.056 > Success
11:12:40.106 > [DPL::loop] ******************* ENTER **********************
11:12:40.152 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15159 s
11:12:40.195 > [DPL::loop] dcVoltage: 36.70 V, loadCorrectedVoltage: 36.70 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:40.254 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:40.295 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:40.344 > [DPL::loop] battery discharging allowed, PowerMeter: -182 W, target consumption: -100 W
11:12:40.384 > [DPL::loop] ******************* Leaving PL, calculated limit: -82 W, requested limit: 124 W (kept last requested)
11:12:40.468 > Fetch inverter: 114483761097
11:12:40.520 > TX RealTimeRunData 865.00 MHz --> 15 83 76 10 97 80 10 26 80 80 0B 00 65 C4 A9 18 00 00 00 00 00 00 00 00 D8 B8 AA
11:12:40.566 > Interrupt received
11:12:40.619 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 01 00 01 01 39 01 3B 01 F1 01 F8 06 15 06 3A 00 00 F5 | -55 dBm
11:12:40.670 > Interrupt received
11:12:40.713 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 02 72 83 00 00 89 9B 02 2E 02 27 09 3F 13 89 0B A9 37 | -55 dBm
11:12:40.762 > Interrupt received
11:12:40.806 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 83 00 00 00 7E 03 E8 01 58 00 02 F1 DF B2 | -56 dBm
11:12:40.983 > [DPL::loop] ******************* ENTER **********************
11:12:41.026 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15160 s
11:12:41.074 > [DPL::loop] dcVoltage: 36.70 V, loadCorrectedVoltage: 36.70 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:41.116 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:41.162 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:41.204 > [DPL::loop] battery discharging allowed, PowerMeter: -196 W, target consumption: -100 W
11:12:41.260 > [DPL::loop] ******************* Leaving PL, calculated limit: -96 W, requested limit: 124 W (kept last requested)
11:12:41.314 > RX Period End
11:12:41.354 > Success
11:12:41.752 > PowerMeterClass: TotalPower: -213.55
11:12:42.071 > [DPL::loop] ******************* ENTER **********************
11:12:42.114 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15161 s
11:12:42.156 > [DPL::loop] dcVoltage: 36.70 V, loadCorrectedVoltage: 36.70 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:42.203 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:42.244 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:42.290 > [DPL::loop] battery discharging allowed, PowerMeter: -214 W, target consumption: -100 W
11:12:42.334 > [DPL::loop] ******************* Leaving PL, calculated limit: -114 W, requested limit: 124 W (kept last requested)
11:12:42.470 > Fetch inverter: 116491433252
11:12:42.526 > TX RealTimeRunData 865.00 MHz --> 15 91 43 32 52 80 10 26 80 80 0B 00 65 C4 A9 1A 00 00 00 00 00 00 00 00 B8 A1 11
11:12:42.575 > Interrupt received
11:12:42.621 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 01 00 01 01 71 01 71 00 02 00 01 00 0A 00 06 00 00 1E | -35 dBm
11:12:42.666 > Interrupt received
11:12:42.716 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 02 8A 90 00 00 4D 29 00 08 00 07 01 71 01 6D 00 05 7B | -35 dBm
11:12:42.766 > Interrupt received
11:12:42.816 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 03 00 01 00 15 00 03 00 00 45 C5 00 00 BC 4C 00 05 70 | -36 dBm
11:12:42.866 > Interrupt received
11:12:42.916 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 04 00 04 09 44 13 89 00 00 00 00 00 00 00 00 00 83 45 | -36 dBm
11:12:42.968 > Interrupt received
11:12:43.014 > RX 865.00 MHz --> 95 91 43 32 52 80 10 26 80 85 00 13 EF 0B 63 | -36 dBm
11:12:43.068 > RX Period End
11:12:43.158 > Success
11:12:43.196 > [ 15162.481] DPL: the system is stable, the last power limit is still valid
11:12:43.276 > [DPL::loop] ******************* ENTER **********************
11:12:43.313 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15162 s
11:12:43.366 > [DPL::loop] dcVoltage: 36.90 V, loadCorrectedVoltage: 36.90 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:43.414 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:43.456 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:43.505 > [DPL::loop] battery discharging allowed, PowerMeter: -238 W, target consumption: -100 W
11:12:43.545 > [DPL::loop] ******************* Leaving PL, calculated limit: -138 W, requested limit: 124 W (kept last requested)
11:12:44.451 > [DPL::loop] ******************* ENTER **********************
11:12:44.498 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15163 s
11:12:44.543 > [DPL::loop] dcVoltage: 36.90 V, loadCorrectedVoltage: 36.90 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:44.582 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:44.626 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:44.677 > [DPL::loop] battery discharging allowed, PowerMeter: -238 W, target consumption: -100 W
11:12:44.725 > [DPL::loop] ******************* Leaving PL, calculated limit: -138 W, requested limit: 124 W (kept last requested)
11:12:44.779 > Fetch inverter: 114483761097
11:12:44.837 > TX RealTimeRunData 865.00 MHz --> 15 83 76 10 97 80 10 26 80 80 0B 00 65 C4 A9 1C 00 00 00 00 00 00 00 00 18 8A 5C
11:12:44.880 > Interrupt received
11:12:44.927 > RX 865.00 MHz --> 95 83 76 10 97 80 10 26 80 01 00 01 01 39 01 3D 02 47 02 4E 07 23 07 4F 00 00 B0 | -56 dBm
11:12:44.976 > Interrupt received

0 replies

chrisli01 · 2024-02-08T10:14:41Z

chrisli01
Feb 8, 2024
Author

Sollte einschalten, bleibt aber gelb…

0 replies

schlimmchen · 2024-02-08T10:51:16Z

schlimmchen
Feb 8, 2024
Maintainer

11:12:44.451 > [DPL::loop] ******************* ENTER **********************
11:12:44.498 > [DPL::loop] battery interface disabled, SoC: 0 %, StartTH: 80 %, StopTH: 20 %, SoC age: 15163 s
11:12:44.543 > [DPL::loop] dcVoltage: 36.90 V, loadCorrectedVoltage: 36.90 V, StartTH: 1.00 V, StopTH: 0.00 V
11:12:44.582 > [DPL::loop] StartTH reached: yes, StopTH reached: no, inverter is NOT producing
11:12:44.626 > [DPL::loop] SolarPT disabled, Drain Strategy: 0, canUseDirectSolarPower: no
11:12:44.677 > [DPL::loop] battery discharging allowed, PowerMeter: -238 W, target consumption: -100 W
11:12:44.725 > [DPL::loop] ******************* Leaving PL, calculated limit: -138 W, requested limit: 124 W (kept last requested)

Naja, moment. Ist dem PowerMeter zu trauen? Du speist bereits 238W ins Netz ein obwohl der vom DPL geregelte WR im Standby ist? Ist das korrekt?

Basierend darauf (und deinem Target von -100W) entscheidet der DPL, dass der WR Leistung verbrauchen müsste, was natürlich nicht geht. Er schickt kein neues Limit und der WR bleibt aus. Wann und warum er ausgeschaltet wurde, hast du leider nicht erfasst.

Ich seh hier leider das Problem nicht. Aus meiner Sicht macht der DPL hier alles richtig. Hast du einen weiteren Auszug, wo dein PowerMeter einen Wert größer -100 meldet? Erst dann muss der DPL den WR ja wieder einschalten.

1 reply

spcqike Feb 8, 2024

er hat noch einen HMS-800, der wahrscheinlich einspeist, was er kann.

@chrisli01

Sollte einschalten, bleibt aber gelb…

davon bräuchte man einen Konsolen Output. dein Auszug zeigt aber immer nur Powermeter Werte < -100W. damit gibt es für den DPL keinen Grund, den HMS-2000 noch zu starten.

chrisli01 · 2024-02-08T12:01:58Z

chrisli01
Feb 8, 2024
Author

Aaaaahhhh, glaub jetzt versteh ichs bzw hatte wohl einen Denkfehler!🤦🏼‍♂️
Sorry!!!

Es werden zwar 464W Soll angezeigt, aber weil ich e schon 77,8W einspeise, schaltet der WR nicht ein.

Habe ich das richtig verstanden?

Ja genau, 800W WR wird nicht geregelt, steht immer auf 100%. Der 2000er regelt dazu.

3 replies

spcqike Feb 8, 2024

prinzipiell, ja.

Bei dir kommt wohl noch dazu, dass du mit 77.8W Einspeisung über der Hysterese (15W) bist, du bräuchtest ja 22.2W um auf dein Ziel von -100W zu kommen, du aber unterhalb deiner Mindesteinspeisung (30W) bist. Das sollte auch so im Log ersichtlich werden, denke ich.

Wenn du den DPL genauer testen willst, kannst du ja temporär den HM-800 drosseln, sodass du nicht auf <-70W Netzbezug kommst, oder dein Zielwert auf bspw. -200W erhöhen.

schlimmchen Feb 8, 2024
Maintainer

Sehr gut. Danke auch @spcqike. Dann markiere diese Diskussion doch als gelöst, @chrisli01, danke.

chrisli01 Feb 8, 2024
Author

Vielen Dank für die schnelle, freundliche Hilfe sowie Erklärung!!

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Wechselrichter bleibt im StandBy (gelb) #645

{{title}}

Replies: 7 comments 4 replies

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

Select a reply

Wechselrichter bleibt im StandBy (gelb) #645

chrisli01 Feb 8, 2024

Replies: 7 comments · 4 replies

schlimmchen Feb 8, 2024 Maintainer

chrisli01 Feb 8, 2024 Author

schlimmchen Feb 8, 2024 Maintainer

chrisli01 Feb 8, 2024 Author

chrisli01 Feb 8, 2024 Author

schlimmchen Feb 8, 2024 Maintainer

spcqike Feb 8, 2024

chrisli01 Feb 8, 2024 Author

spcqike Feb 8, 2024

schlimmchen Feb 8, 2024 Maintainer

chrisli01 Feb 8, 2024 Author

chrisli01
Feb 8, 2024

Replies: 7 comments 4 replies

schlimmchen
Feb 8, 2024
Maintainer

chrisli01
Feb 8, 2024
Author

schlimmchen
Feb 8, 2024
Maintainer

chrisli01
Feb 8, 2024
Author

chrisli01
Feb 8, 2024
Author

schlimmchen
Feb 8, 2024
Maintainer

chrisli01
Feb 8, 2024
Author

schlimmchen Feb 8, 2024
Maintainer

chrisli01 Feb 8, 2024
Author