main.py

#!/bin/env python3
# The MIT License (MIT)

# Copyright 2021,2022 HalfMarble LLC

# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:

# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.

# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.


import os.path
import tempfile
import subprocess
import webbrowser
import sys

from os import listdir
from os.path import dirname

from kivy import Config
from kivy.uix.filechooser import FileChooserIconView

from PcbMouseBites import *
from PcbRail import *
from PcbExport import *

Config.set('kivy', 'keyboard_mode', 'system')

Config.set('graphics', 'width', '1600')
Config.set('graphics', 'height', '960')
Config.set('graphics', 'minimum_width', '1024')
Config.set('graphics', 'minimum_height', '670')


from kivy.app import App
from kivy.factory import Factory
from kivy.utils import platform
from kivy.uix.widget import Widget
from kivy.properties import ListProperty, ObservableList
from typing import Final
from kivy.clock import Clock
from kivy.uix.popup import Popup
from kivy.uix.label import Label
from kivy.uix.floatlayout import FloatLayout
from kivy.properties import ObjectProperty

from os.path import sep, expanduser, isdir, dirname

from AppSettings import *
from Utilities import *
from GridRenderer import *
from OffScreenImage import *
from OffScreenScatter import *
from Pcb import *
from PcbBoard import *
from PcbPanel import *
from UI import *
from PcbFile import *


class LoadDialog(FloatLayout):
    load = ObjectProperty(None)
    cancel = ObjectProperty(None)


class SaveDialog(FloatLayout):
    save = ObjectProperty(None)
    cancel = ObjectProperty(None)


Factory.register('LoadDialog', cls=LoadDialog)


class PanelizerApp(App):
    _zoom_values = [500, 300, 200, 175, 150, 125, 110, 100, 90, 80, 70, 60, 50, 40, 30, 20, 10]
    _zoom_values_index = _zoom_values.index(100)
    _zoom_str = '{}%'.format(_zoom_values[_zoom_values_index])
    _zoom_values_properties = ListProperty([])

    def __init__(self, **kwargs):
        super(PanelizerApp, self).__init__(**kwargs)

        self._demo = True
        self._demo_label = None

        self._settings = AppSettings

        self._tmp_folders_to_delete = []
        self._app_tmp_folder = None
        self._current_pcb_folder = None

        self._finish_load_selected = None
        self._finish_save_selected = None

        if platform == 'win':
            self._root_path = dirname(expanduser('~'))
        else:
            self._root_path = expanduser('~')
        self._load_file_path = self._root_path
        self._save_folder_path = self._root_path

        self._load_popup = None
        self._save_popup = None
        self._progress = None
        self._error_popup = None
        self._settings_popup = None
        self._about_popup = None

        self._screen = None
        self._surface = None

        self._grid = None
        self._grid_renderer = GridRenderer()

        self._pcb = None
        self._pcb_board = None
        self._pcb_panel = None

        self._board_scale_fit = 1.0
        self._panel_scale_fit = 1.0
        self._scale = 100.0
        self._angle = 0.0

        self._pixels_per_cm = 1.0
        self._size = (100, 100)

        self._show_panel = False
        self._panels_x = INITIAL_COLUMNS
        self._panels_y = INITIAL_ROWS
        self._panelization_str = '{}x{}'.format(self._panels_x, self._panels_y)

        self._bites_count = AppSettings.bites_count

    def build(self):
        self.title = Constants.APP_STR
        self._surface = self.root.ids._surface

        self._zoom_values_index = self._zoom_values.index(self._scale)
        for value in self._zoom_values:
            self._zoom_values_properties.append('{}%'.format(value))

        self._progress = Progress(title='Progress processing Pcb')
        self._error_popup = Error(title='Error')
        self._settings_popup = Settings(title='Panelizing settings')
        self._about_popup = About(title='{}'.format(self.title))

        self._grid = OffScreenImage(client=self._grid_renderer, shader=None)
        self._surface.add_widget(self._grid)

        # let the system layout the window
        redraw_window()

        self._demo_label = DemoLabel()

        self.load_pcb(join(dirname(__file__), DEMO_PCB_PATH_STR), None)
        Clock.schedule_once(self.load_underlying_demo_pcb_board, 2.0)

    # for debugging: allows me to supply the underlying Pcb gerber files
    # so that I can test export panel of the "demo" board quickly
    def load_underlying_demo_pcb_board(self, time):
        demo_real_pcb = '/Users/gerard/pcbs/neatoboardG'
        if os.path.isdir(demo_real_pcb):
            self._demo = False
            self._current_pcb_folder = demo_real_pcb
            #self.load(demo_real_pcb, [])

    def load_pcb(self, path, name):
        self.root.ids._panelization_button.state = 'normal'
        self.rotate(True)

        if self._pcb_board is not None:
            self._pcb_board.deactivate()
            self._pcb_board = None
        if self._pcb_panel is not None:
            self._pcb_panel.deactivate()
            self._pcb_panel = None

        self._pcb = Pcb(self.root.ids, path, name)
        if self._pcb.valid:
            self._pixels_per_cm = self._pcb.pixels_per_cm
            self._pcb_board = PcbBoard(root=self._surface, pcb=self._pcb)
            self._pcb_board.activate()
            self._pcb_panel = PcbPanel(parent=self, root=self._surface, pcb=self._pcb)
            self._panels_x = INITIAL_COLUMNS
            self._panels_y = INITIAL_ROWS
            self._pcb_panel.panelize(self._panels_x, self._panels_y, self._angle, self._bites_count)
            self._demo = True if name is None else False

        else:
            self._pixels_per_cm = self._pcb.pixels_per_cm
            self._pcb_board = PcbBoard(root=self._surface, pcb=self._pcb)
            self._pcb_board.activate()

        self.update_status()
        self.panelize()
        # Clock.schedule_interval(self.timer_callback, 0.1)

        return self._pcb.invalid_reason

    def show_panel(self):
        if self._pcb_panel is not None:
            self._show_panel = self.root.ids._panelization_button.state == 'down'
            if not self._show_panel:
                self.root.ids._panelization_button.state = 'down'
                self._pcb_board.deactivate()
                self._pcb_panel.activate()

    def panelize(self):
        self._surface.remove_widget(self._demo_label)
        if self._pcb is not None:
            self._show_panel = self.root.ids._panelization_button.state == 'down'
            if self._show_panel:
                self._pcb_board.deactivate()
                if self._pcb_panel is not None:
                    self._pcb_panel.deactivate()
                self.update_scale()
                self.calculate_pcb_fit_scale()
                if self._pcb_panel is not None:
                    self._pcb_panel.panelize(self._panels_x, self._panels_y, self._angle, self._bites_count)
                self.center()
                if self._pcb_panel is not None:
                    self._pcb_panel.activate()
            else:
                if self._pcb_panel is not None:
                    self._pcb_panel.deactivate()
                self.update_scale()
                self.center()
                self._pcb_board.activate()
            self.update_status()
            self.calculate_pcb_fit_scale()
        if self._demo:
            self._surface.add_widget(self._demo_label)

    def panelize_column(self, add):
        if self._pcb is not None:
            if add:
                self._panels_x += 1
                if self._panels_x > MAX_COLUMNS:
                    self._panels_x = MAX_COLUMNS
                    beep()
                    print('WARNING: clamping self.panels_x: {}'.format(self._panels_x))
            else:
                self._panels_x -= 1
                if self._panels_x < 1:
                    self._panels_x = 1
                    beep()
            self.root.ids._panelization_button.state = 'down'
            self.panelize()

    def panelize_row(self, add):
        if self._pcb is not None:
            if add:
                self._panels_y += 1
                if self._panels_y > MAX_ROWS:
                    self._panels_y = MAX_ROWS
                    beep()
                    print('WARNING: clamping self.panels_y: {}'.format(self._panels_y))
            else:
                self._panels_y -= 1
                if self._panels_y < 1:
                    self._panels_y = 1
                    beep()
            self.root.ids._panelization_button.state = 'down'
            self.panelize()

    def calculate_pcb_fit_scale(self):
        if self._pcb is not None:
            self._board_scale_fit = calculate_fit_scale(FIT_SCALE, self._size, self._pcb.size_pixels)
            if self._pcb_panel is not None:
                self._panel_scale_fit = calculate_fit_scale(FIT_SCALE, self._size, self._pcb_panel.size_pixels)
            self.update_scale()

    def update_scale(self):
        if self._pcb is not None:
            self._scale = self._zoom_values[self._zoom_values_index]

            if self._pcb_board is not None:
                self._pcb_board.set_scale(self._board_scale_fit * self._scale)
            if self._pcb_panel is not None:
                self._pcb_panel.set_scale(self._panel_scale_fit * self._scale)

            if self._show_panel:
                pixels_per_cm_scaled = (self._pixels_per_cm * self._panel_scale_fit * self._scale) / 100.0
            else:
                pixels_per_cm_scaled = (self._pixels_per_cm * self._board_scale_fit * self._scale) / 100.0
            self._grid_renderer.set_pixels_per_cm(pixels_per_cm_scaled)

            self.center()

    def update_status(self):
        self._panelization_str = '{}x{}'.format(self._panels_x, self._panels_y)
        self.root.ids._panelization_label.text = self._panelization_str
        status = self.root.ids._status_label
        status.text = ''
        units = ''
        if self._pcb.valid:
            units = 'mm'
        if self._pcb is not None:
            #self.root.ids._save_button.disabled = False
            status.text += '  Pcb: {},'.format(self._pcb.board_name)
            if self._angle == 0.0:
                status.text += '  size: {}{} x {}{},'.format(round(self._pcb.size_mm[0], 2), units,
                                                             round(self._pcb.size_mm[1], 2), units)
            else:
                status.text += '  size: {}{} x {}{},'.format(round(self._pcb.size_mm[1], 2), units,
                                                             round(self._pcb.size_mm[0], 2), units)
            status.text += '  {}valid Pcb, '.format('in' if not self._pcb.valid else '')
            if self._pcb_panel is not None:
                # self.root.ids._save_button.disabled = True
                status.text += '  panel Pcb count: {},'.format(self._panels_x * self._panels_y)
                status.text += '  panel size: {}{} x {}{},'.format(round(self._pcb_panel.size_mm[0], 2), units,
                                                                   round(self._pcb_panel.size_mm[1], 2), units)
                status.text += '  {}valid layout.'.format('in' if not self._pcb_panel.valid_layout else '')
            else:
                status.text += '  invalid layout.'
            if self._demo:
                status.text += ' DEMO mode.'
        else:
            status.text = '  Invalid Pcb.'

    def update_zoom_title(self):
        if self._pcb is not None:
            self._zoom_str = self._zoom_values_properties[self._zoom_values_index]
            self.root.ids._zoom_button.text = self._zoom_str
            self.update_scale()
            self.update_status()

    def select_zoom_index(self, index):
        if self._pcb is not None:
            self._zoom_values_index = index
            self.update_zoom_title()

    def select_zoom(self, in_out):
        if self._pcb is not None:
            if in_out:
                self._zoom_values_index += 1
                if self._zoom_values_index >= len(self._zoom_values):
                    self._zoom_values_index = (len(self._zoom_values) - 1)
                    beep()
            else:
                self._zoom_values_index -= 1
                if self._zoom_values_index < 0:
                    self._zoom_values_index = 0
                    beep()
            self.update_zoom_title()

    def layer_toggle(self, layer, state):
        if self._pcb is not None:
            self._pcb.set_layer(self.root.ids, layer, state)
            if self._pcb_board is not None:
                self._pcb_board.paint()
            if self._pcb_panel is not None:
                self._pcb_panel.paint()
            self.update_status()

    def resize(self, size):
        if self._pcb is not None:
            self._size = size
            self.calculate_pcb_fit_scale()

    def rotate(self, vertical):
        if self._pcb is not None:
            if vertical:
                self._angle = 0.0
                self.root.ids._vertical_button.state = 'down'
                self.root.ids._horizontal_button.state = 'normal'
            else:
                self._angle = 90.0
                self.root.ids._vertical_button.state = 'normal'
                self.root.ids._horizontal_button.state = 'down'
            self.panelize()

    def center(self):
        self._grid.paint(self._size)
        if self._pcb is not None:
            if self._pcb_board is not None:
                self._pcb_board.center(self._size, self._angle)
            if self._pcb_panel is not None:
                self._pcb_panel.center(self._size, self._angle)
            self.update_status()

    def dismiss_load_popup(self):
        if self._load_popup is not None:
            self._load_popup.dismiss()

    def load_finish(self, time):
        path = self._finish_load_selected

        temp_zip_dir = None
        filename_only = os.path.basename(os.path.splitext(path)[0])
        filename_ext = os.path.splitext(path)[1].lower()
        if filename_ext == '.zip':
            temp_zip_dir = tempfile.TemporaryDirectory().name
            #print('creating temporary zip directory', temp_zip_dir)
            try:
                os.mkdir(temp_zip_dir)
            except FileExistsError:
                pass
            unzip_file(temp_zip_dir, path)
            path = temp_zip_dir
        else:
            if not os.path.isdir(path):
                path = self._load_file_path

        if os.path.isdir(path):
            temp_dir = tempfile.TemporaryDirectory().name
            #print('creating temporary directory', temp_dir)
            try:
                os.mkdir(temp_dir)
            except FileExistsError:
                pass
            self._current_pcb_folder = path
            generate_pcb_data_layers(path, '.', temp_dir, self._progress, filename_only)
            error_msg = self.load_pcb(temp_dir, filename_only)
            #print('marking temporary directory for deletion {}', temp_dir)
            self._tmp_folders_to_delete.append(temp_dir)

        if temp_zip_dir is not None:
            #print('marking temporary zip directory for deletion {}', temp_zip_dir)
            self._tmp_folders_to_delete.append(temp_zip_dir)

        self._progress.dismiss()

        if error_msg is not None:
            self.error_open(error_msg)

    def load(self, path, selection):
        # print('load')
        # print(' path {}'.format(path))
        # print(' selection {}'.format(selection))
        # print(' self._root_path {}'.format(self._root_path))

        if self._root_path in path:
            self._load_file_path = path
            self._finish_load_selected = path
            if len(selection) > 0:
                self._load_file_path = os.path.dirname(os.path.abspath(selection[0]))
        self._finish_load_selected = self._load_file_path

        if len(selection) > 0:
            if self._root_path in selection[0]:
                self._finish_load_selected = os.path.abspath(selection[0])
        if os.path.isfile(self._finish_load_selected):
            selection_ext = os.path.splitext(self._finish_load_selected)[1].lower()
            if selection_ext != '.zip':
                self._finish_load_selected = os.path.dirname(self._finish_load_selected)

        self.dismiss_load_popup()
        Clock.schedule_once(self.load_finish, 1.0)

        self._progress.open()
        update_progressbar(self._progress, 'Loading Pcb ...', 0.0)

    def load_pcb_from_disk(self):
        content = LoadDialog(load=self.load, cancel=self.dismiss_load_popup)
        file_chooser = content.ids._load_file_chooser
        file_chooser.rootpath = self._root_path
        file_chooser.path = self._load_file_path
        file_chooser.dirselect = True

        self._load_popup = Popup(title="Select folder with Pcb gerber files or .zip archive file to load",
                                 content=content, size_hint=(0.9, 0.9))
        self._load_popup.open()

    def save_finish(self, time):
        path = self._finish_save_selected

        try:
            if not os.path.exists(path):
                os.makedirs(path)
        except:
            self._progress.dismiss()
            self.error_open("Unable to export to {}!".format(path))
            return

        update_progressbar(self._progress, 'exporting mouse bites Pcb...', 0.1)
        mouse_bite_path = PcbMouseBites.generate_pcb_files()
        print('generated mouse bite files in {}'.format(mouse_bite_path))

        update_progressbar(self._progress, 'exporting rails Pcb...', 0.2)
        rail_path = PcbRail.generate_pcb_files()
        print('generated rails files in {}'.format(rail_path))

        pcb_size = self._pcb.size_mm
        pcb_width_mm = pcb_size[0]
        pcb_height_mm = pcb_size[1]
        rail_origins = self._pcb_panel.get_rails_origins(pcb_width_mm, pcb_height_mm)
        pcb_origins = self._pcb_panel.get_pcbs_origins(pcb_width_mm, pcb_height_mm)
        mouse_bite_origins = self._pcb_panel.get_mouse_bites_origins(pcb_width_mm, pcb_height_mm)
        # print('rail_origins {}'.format(rail_origins))
        # print('pcb_origins {}'.format(pcb_origins))
        # print('mouse_bite_origins {}'.format(mouse_bite_origins))

        pcb_rect_mm = (self._pcb.origin_mm, self._pcb.size_mm)
        error_msg = export_pcb_panel(self._progress, path,
                                     self._current_pcb_folder, pcb_origins, pcb_rect_mm,
                                     rail_path, rail_origins,
                                     mouse_bite_path, mouse_bite_origins, AppSettings.bite, AppSettings.gap,
                                     self._angle)
        if error_msg is not None:
            self.error_open(error_msg)

        self._progress.dismiss()

    def dismiss_save_popup(self):
        self._save_popup.dismiss()

    def save(self, path, selection, foldername):
        # print('save')
        # print(' path {}'.format(path))
        # print(' selection {}'.format(selection))
        # print(' foldername {}'.format(foldername))
        # print(' self._root_path {}'.format(self._root_path))

        if len(selection) > 0:
            if self._root_path in selection[0]:
                self._save_folder_path = selection[0]
                if not os.path.isdir(self._save_folder_path) and os.path.isfile(self._save_folder_path):
                    self._save_folder_path = os.path.dirname(selection[0])
        if foldername is not None and len(foldername) > 0:
            self._finish_save_selected = os.path.join(self._save_folder_path, foldername)
        else:
            self._finish_save_selected = os.path.join(self._save_folder_path, self._pcb.board_name+"_panelized")

        self.dismiss_save_popup()

        if False:
        #if os.path.isdir(self._finish_save_selected):
            string = truncate_str_middle(self._finish_save_selected, 60)
            self.error_open("Folder {} already exists!".format(string))
        else:
            update_progressbar(self._progress, 'exporting Pcb panel...', 0.0)
            Clock.schedule_once(self.save_finish, 1.0)
            self._progress.open()

    def save_panel_to_disk(self):
        if self._demo:
            self.error_open("Can not export DEMO Pcb board (no src gerber files available)")
            return

        if self._pcb_panel is not None:
            self.show_panel()
            if self._pcb_panel.valid_layout:
                content = SaveDialog(save=self.save, cancel=self.dismiss_save_popup)
                file_chooser = content.ids._save_file_chooser
                file_chooser.rootpath = self._root_path
                file_chooser.path = self._save_folder_path
                file_chooser.dirselect = True
                content.ids._save_file_name.text = self._pcb.board_name+'_panelized'

                self._save_popup = Popup(title="Select folder where to export the Pcb panel",
                                         content=content, size_hint=(0.9, 0.9))
                self._save_popup.open()
            else:
                self.error_open("Invalid Pcb panel layout")
        else:
            self.error_open("Invalid Pcb board")

    def error_open(self, text):
        label = self._error_popup.ids._error_label
        label.text = text
        self._error_popup.open()

    def error_close(self):
        self._error_popup.dismiss()

    def settings_apply(self):
        self._settings_popup.ids._gap_setting.text = '{:0.3f}'.format(AppSettings.gap)
        self._settings_popup.ids._rail_setting.text = '{:0.3f}'.format(AppSettings.rail)
        self._settings_popup.ids._bites_count_setting.text = '{:d}'.format(int(self._bites_count))
        self._settings_popup.ids._bite_setting.text = '{:0.3f}'.format(AppSettings.bite)
        self._settings_popup.ids._bite_hole_radius_setting.text = '{:0.3f}'.format(AppSettings.bite_hole_radius)
        self._settings_popup.ids._bite_hole_space_setting.text = '{:0.3f}'.format(AppSettings.bite_hole_space)
        self._settings_popup.ids._use_vcut_setting.state = 'down' if AppSettings.use_vcut else 'normal'
        self._settings_popup.ids._use_jlc_setting.state = 'down' if AppSettings.use_jlc else 'normal'
        self._settings_popup.ids._merge_error_setting.text = '{:0.3f}'.format(AppSettings.merge_error)

    def settings_open(self):
        self.show_panel()
        self.settings_apply()
        self._settings_popup.open()

    def settings_default(self):
        self._settings.default()
        self.settings_apply()

    def settings_close(self):
        self._settings_popup.dismiss()
        try:
            gap = float(self._settings_popup.ids._gap_setting.text)
        except:
            gap = AppSettings.gap
        try:
            rail = float(self._settings_popup.ids._rail_setting.text)
        except:
            rail = AppSettings.rail
        try:
            self._bites_count = int(self._settings_popup.ids._bites_count_setting.text)
        except:
            self._bites_count = AppSettings.bites_count
        try:
            bite = float(self._settings_popup.ids._bite_setting.text)
        except:
            bite = AppSettings.bite
        try:
            bite_hole_radius = float(self._settings_popup.ids._bite_hole_radius_setting.text)
        except:
            bite_hole_radius = AppSettings.bite_hole_radius
        try:
            bite_hole_space = float(self._settings_popup.ids._bite_hole_space_setting.text)
        except:
            bite_hole_space = AppSettings.bite_hole_space
        use_vcut = True if self._settings_popup.ids._use_vcut_setting.state == 'down' else False
        use_jlc = True if self._settings_popup.ids._use_jlc_setting.state == 'down' else False
        try:
            merge_error = float(self._settings_popup.ids._merge_error_setting.text)
        except:
            merge_error = AppSettings.merge_error
        AppSettings.set(gap, rail, self._bites_count, bite, bite_hole_radius, bite_hole_space, use_vcut, use_jlc, merge_error)

        PcbRail.invalidate()
        PcbMouseBites.invalidate()
        self.panelize()

    def settings_cancel(self):
        self._settings_popup.dismiss()

    def settings_oshpark(self):
        gap = Constants.OSHPARK_PCB_PANEL_GAP_MM
        rail = Constants.OSHPARK_PCB_PANEL_RAIL_HEIGHT_MM
        bite = Constants.OSHPARK_PCB_PANEL_BITES_SIZE_MM
        bite_hole_radius = Constants.OSHPARK_PCB_BITES_HOLE_RADIUS_MM
        bite_hole_space = Constants.OSHPARK_PCB_BITES_HOLE_SPACE_MM
        use_vcut = Constants.OSHPARK_PCB_PANEL_VCUT
        use_jlc = False
        merge_error = AppSettings.merge_error
        AppSettings.set(gap, rail, self._bites_count, bite, bite_hole_radius, bite_hole_space, use_vcut, use_jlc, merge_error)
        self.settings_apply()

    def settings_jlcpcb(self):
        gap = Constants.JLC_PCB_PANEL_GAP_MM
        rail = Constants.JLC_PCB_PANEL_RAIL_HEIGHT_MM
        bite = Constants.JLC_PCB_PANEL_BITES_SIZE_MM
        bite_hole_radius = Constants.JLC_PCB_BITES_HOLE_RADIUS_MM
        bite_hole_space = Constants.JLC_PCB_BITES_HOLE_SPACE_MM
        use_vcut = Constants.JLC_PCB_PANEL_VCUT
        use_jlc = True
        merge_error = AppSettings.merge_error
        AppSettings.set(gap, rail, self._bites_count, bite, bite_hole_radius, bite_hole_space, use_vcut, use_jlc, merge_error)
        self.settings_apply()

    def settings_pcbway(self):
        gap = Constants.PCBWAY_PCB_PANEL_GAP_MM
        rail = Constants.PCBWAY_PCB_PANEL_RAIL_HEIGHT_MM
        bite = Constants.PCBWAY_PCB_PANEL_BITES_SIZE_MM
        bite_hole_radius = Constants.PCBWAY_PCB_BITES_HOLE_RADIUS_MM
        bite_hole_space = Constants.PCBWAY_PCB_BITES_HOLE_SPACE_MM
        use_vcut = Constants.PCBWAY_PCB_PANEL_VCUT
        use_jlc = False
        merge_error = AppSettings.merge_error
        AppSettings.set(gap, rail, self._bites_count, bite, bite_hole_radius, bite_hole_space, use_vcut, use_jlc, merge_error)
        self.settings_apply()

    def about(self):
        self._about_popup.open()

    def about_ok(self):
        url = 'https://ko-fi.com/halfmarble'
        if sys.platform == 'darwin':
            subprocess.Popen(['open', url])
        else:
            webbrowser.open_new_tab(url)
        self._about_popup.dismiss()

    def cleanup(self):
        if ALLOW_DIR_DELETIONS:
            PcbRail.cleanup()
            PcbMouseBites.cleanup()
            if len(self._tmp_folders_to_delete) > 0:
                for folder in self._tmp_folders_to_delete:
                    rmrf(folder)


if __name__ == '__main__':
    app = PanelizerApp()
    app.run()
    app.cleanup()