Someone can explain me some functions. Thanks

[GoogleCodeExporter]

Hi guys.
Can you explain me some functions?

The function movemeForceRGB : min value 0, and max 1, step 0.005?

The function movemeRumble : minimal value 70, max 310, step 10?

The function movemeTrackHues,movemeCameraSetNumSlices what is the function 
purpose?

The function movemePrepareCamera : min,max value, step?

How to receive the move navigation controller battery state?

Thanks.

Original issue reported on code.google.com by abituri...@gmail.com on 23 Oct 2011 at 3:13

[GoogleCodeExporter]

Hi,

forceRGB - Force the colour of the sphere to be an RGB triplet expressed as 
floats. This disables sphere tracking but allows you to make the sphere a 
particular colour.

Rumble - Set the vibration of the Move controller. It ranges from 0 to 255. 
Anything below a certain threshold (say, 70) may result in no rumble.

TrackHues - Enable tracking on 1-4 Move controllers. Parameters are the desired 
hue of each controller. If the hue can't be used due to lighting conditions, 
etc- a different, but similar, hue will be chosen for you.

CameraSetNumSlices - Set the number of slices the camera image being sent over 
is divided in to. Each slice must be compressed into 60k, so the more slices 
the better image quality. 

PrepareCamera - Setup the camera. I forget what the parameters are for this 
one, I'll have to look it up at the office.

AFAIK, you can't get the battery state of the controllers. You can always press 
the PS button and look on the XMB.

Original comment by j...@johnmccutchan.com on 23 Oct 2011 at 3:19

[GoogleCodeExporter]

More details on TrackHues: There are 360 (0..359) hues available. There is also 
special values (can be found in existing sample code) that says "I don't care 
what hue, just pick one for me" and "Don't track this controller"

Original comment by j...@johnmccutchan.com on 23 Oct 2011 at 3:20

[GoogleCodeExporter]

Thank you very much for your quick response.

Original comment by abituri...@gmail.com on 24 Oct 2011 at 7:56

[GoogleCodeExporter]

Hello John.
I can`t find the buttons status, can you help me.
Thanks

Original comment by abituri...@gmail.com on 26 Oct 2011 at 3:25

[GoogleCodeExporter]

Hi,

Please be more specific.

John

Original comment by j...@johnmccutchan.com on 26 Oct 2011 at 8:03

[GoogleCodeExporter]

Hi, i am looking for PS button(power button) status(like pad.digital_buttons)
Thanks.

Original comment by abituri...@gmail.com on 27 Oct 2011 at 10:33

[GoogleCodeExporter]

You can't get the state of the PS button, only the OS can. Are you having 
issues tracking the other buttons?

Original comment by j...@johnmccutchan.com on 27 Oct 2011 at 12:57

[GoogleCodeExporter]

Thanks for your answer to my last question.

Yes, How i can change the color and the track without the camera?
1.Connect
2.Force(gem_num,r,g,b)
3.movemeTrackHues(PICK_FOR_ME,PICK_FOR_ME,PICK_FOR_ME,PICK_FOR_ME)

PICK_FOR_ME will change my color and i can`t track without the camera?

or

1.Connect
2.movemeTrackHues(red, blue, green, yellow)

Can you help me with "BigButton" define at the pad_digital( 0x4 or 0x40 or 
0x004)?

Original comment by abituri...@gmail.com on 27 Oct 2011 at 3:24

[GoogleCodeExporter]

Hi,

As I already explained above, there are 360 hues available (0-359). Call 
trackHues and pass your desired hue instead of PICK_FOR_ME. In a clear 
environment, you should be able to request any of the 360 hues.

BigButton define? I'm not sure what you're talking about? The button bit masks 
should be simple for you to figure out on your own. Digital buttons are given 1 
bit, analog buttons usually have a range (typically 0-255). It should be easy 
to visualize the bitmask and experiment.

John

Original comment by j...@johnmccutchan.com on 27 Oct 2011 at 3:31

[GoogleCodeExporter]

Hi, John.
I sent the 0(orange hue) parameter and I received nothing.
Thanks.

Original comment by abituri...@gmail.com on 27 Oct 2011 at 6:03

[GoogleCodeExporter]

You connect. 
You send the calibrate controller command while pointing it at the PS Eye.
You send the TrackHues command with (0, PICK_FOR_ME, PICK_FOR_ME, PICK_FOR_ME).

and then what happens? Does the Move.Me server application acknowledge the 
commands? What is the status of the GEM controllers?

In the future, please provide detailed, concrete explanations of what commands 
you send to the server and how the server responds (including all status 
messages). Otherwise I won't be able to help you.

Original comment by j...@johnmccutchan.com on 27 Oct 2011 at 6:09

[GoogleCodeExporter]

I don't understand something, why i need to use the calibration command if I am 
going to use the TrackHues command with the hues?
I thought that the calibration command only for the best automatical choise of 
the colour?
Thank you very much, I will send you all information on Sunday. 

Original comment by abituri...@gmail.com on 27 Oct 2011 at 7:16