diff --git a/.gitignore b/.gitignore index e7634f5..b82c2cf 100644 --- a/.gitignore +++ b/.gitignore @@ -1,7 +1,7 @@ *.db *.cache *.swp -headers +bs f out config.cflags diff --git a/headers/CoreText b/headers/CoreText new file mode 120000 index 0000000..79533c7 --- /dev/null +++ b/headers/CoreText @@ -0,0 +1 @@ +/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreText.framework/Versions/A/Headers/ \ No newline at end of file diff --git a/headers/IOKit b/headers/IOKit new file mode 120000 index 0000000..67c08c6 --- /dev/null +++ b/headers/IOKit @@ -0,0 +1 @@ +/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2.sdk/System/Library/Frameworks/IOKit.framework/Headers \ No newline at end of file diff --git a/headers/libtar.h b/headers/libtar.h new file mode 100644 index 0000000..0a26970 --- /dev/null +++ b/headers/libtar.h @@ -0,0 +1,298 @@ +/* +** Copyright 1998-2003 University of Illinois Board of Trustees +** Copyright 1998-2003 Mark D. Roth +** All rights reserved. +** +** libtar.h - header file for libtar library +** +** Mark D. Roth +** Campus Information Technologies and Educational Services +** University of Illinois at Urbana-Champaign +*/ + +#ifndef LIBTAR_H +#define LIBTAR_H + +#include +#include +#include + +#include "libtar_listhash.h" + +#ifdef __cplusplus +extern "C" +{ +#endif + + +/* useful constants */ +#define T_BLOCKSIZE 512 +#define T_NAMELEN 100 +#define T_PREFIXLEN 155 +#define T_MAXPATHLEN (T_NAMELEN + T_PREFIXLEN) + +/* GNU extensions for typeflag */ +#define GNU_LONGNAME_TYPE 'L' +#define GNU_LONGLINK_TYPE 'K' + +/* our version of the tar header structure */ +struct tar_header +{ + char name[100]; + char mode[8]; + char uid[8]; + char gid[8]; + char size[12]; + char mtime[12]; + char chksum[8]; + char typeflag; + char linkname[100]; + char magic[6]; + char version[2]; + char uname[32]; + char gname[32]; + char devmajor[8]; + char devminor[8]; + char prefix[155]; + char padding[12]; + char *gnu_longname; + char *gnu_longlink; +}; + + +/***** handle.c ************************************************************/ + +typedef int (*openfunc_t)(const char *, int, ...); +typedef int (*closefunc_t)(int); +typedef ssize_t (*readfunc_t)(int, void *, size_t); +typedef ssize_t (*writefunc_t)(int, const void *, size_t); + +typedef struct +{ + openfunc_t openfunc; + closefunc_t closefunc; + readfunc_t readfunc; + writefunc_t writefunc; +} +tartype_t; + +typedef struct +{ + tartype_t *type; + char *pathname; + long fd; + int oflags; + int options; + struct tar_header th_buf; + libtar_hash_t *h; + openfunc_t open; +} +TAR; + +/* constant values for the TAR options field */ +#define TAR_GNU 1 /* use GNU extensions */ +#define TAR_VERBOSE 2 /* output file info to stdout */ +#define TAR_NOOVERWRITE 4 /* don't overwrite existing files */ +#define TAR_IGNORE_EOT 8 /* ignore double zero blocks as EOF */ +#define TAR_CHECK_MAGIC 16 /* check magic in file header */ +#define TAR_CHECK_VERSION 32 /* check version in file header */ +#define TAR_IGNORE_CRC 64 /* ignore CRC in file header */ + +/* this is obsolete - it's here for backwards-compatibility only */ +#define TAR_IGNORE_MAGIC 0 + +extern const char libtar_version[]; + + +/* open a new tarfile handle */ +int tar_open(TAR **t, char *pathname, tartype_t *type, + int oflags, int mode, int options); + +/* make a tarfile handle out of a previously-opened descriptor */ +int tar_fdopen(TAR **t, int fd, char *pathname, tartype_t *type, + int oflags, int mode, int options); + +/* returns the descriptor associated with t */ +int tar_fd(TAR *t); + +/* close tarfile handle */ +int tar_close(TAR *t); + + +/***** append.c ************************************************************/ + +/* forward declaration to appease the compiler */ +struct tar_dev; + +/* cleanup function */ +void tar_dev_free(struct tar_dev *tdp); + +/* Appends a file to the tar archive. + * Arguments: + * t = TAR handle to append to + * realname = path of file to append + * savename = name to save the file under in the archive + */ +int tar_append_file(TAR *t, char *realname, char *savename); + +/* write EOF indicator */ +int tar_append_eof(TAR *t); + +/* add file contents to a tarchive */ +int tar_append_regfile(TAR *t, char *realname); + + +/***** block.c *************************************************************/ + +/* macros for reading/writing tarchive blocks */ +#define tar_block_read(t, buf) \ + (*((t)->type->readfunc))((t)->fd, (char *)(buf), T_BLOCKSIZE) +#define tar_block_write(t, buf) \ + (*((t)->type->writefunc))((t)->fd, (char *)(buf), T_BLOCKSIZE) + +/* read/write a header block */ +int th_read(TAR *t); +int th_write(TAR *t); + + +/***** decode.c ************************************************************/ + +/* determine file type */ +#define TH_ISREG(t) ((t)->th_buf.typeflag == REGTYPE \ + || (t)->th_buf.typeflag == AREGTYPE \ + || (t)->th_buf.typeflag == CONTTYPE \ + || (S_ISREG((mode_t)oct_to_int((t)->th_buf.mode)) \ + && (t)->th_buf.typeflag != LNKTYPE)) +#define TH_ISLNK(t) ((t)->th_buf.typeflag == LNKTYPE) +#define TH_ISSYM(t) ((t)->th_buf.typeflag == SYMTYPE \ + || S_ISLNK((mode_t)oct_to_int((t)->th_buf.mode))) +#define TH_ISCHR(t) ((t)->th_buf.typeflag == CHRTYPE \ + || S_ISCHR((mode_t)oct_to_int((t)->th_buf.mode))) +#define TH_ISBLK(t) ((t)->th_buf.typeflag == BLKTYPE \ + || S_ISBLK((mode_t)oct_to_int((t)->th_buf.mode))) +#define TH_ISDIR(t) ((t)->th_buf.typeflag == DIRTYPE \ + || S_ISDIR((mode_t)oct_to_int((t)->th_buf.mode)) \ + || ((t)->th_buf.typeflag == AREGTYPE \ + && ((t)->th_buf.name[strlen((t)->th_buf.name) - 1] == '/'))) +#define TH_ISFIFO(t) ((t)->th_buf.typeflag == FIFOTYPE \ + || S_ISFIFO((mode_t)oct_to_int((t)->th_buf.mode))) +#define TH_ISLONGNAME(t) ((t)->th_buf.typeflag == GNU_LONGNAME_TYPE) +#define TH_ISLONGLINK(t) ((t)->th_buf.typeflag == GNU_LONGLINK_TYPE) + +/* decode tar header info */ +#define th_get_crc(t) oct_to_int((t)->th_buf.chksum) +#define th_get_size(t) oct_to_int((t)->th_buf.size) +#define th_get_mtime(t) oct_to_int((t)->th_buf.mtime) +#define th_get_devmajor(t) oct_to_int((t)->th_buf.devmajor) +#define th_get_devminor(t) oct_to_int((t)->th_buf.devminor) +#define th_get_linkname(t) ((t)->th_buf.gnu_longlink \ + ? (t)->th_buf.gnu_longlink \ + : (t)->th_buf.linkname) +char *th_get_pathname(TAR *t); +mode_t th_get_mode(TAR *t); +uid_t th_get_uid(TAR *t); +gid_t th_get_gid(TAR *t); + + +/***** encode.c ************************************************************/ + +/* encode file info in th_header */ +void th_set_type(TAR *t, mode_t mode); +void th_set_path(TAR *t, char *pathname); +void th_set_link(TAR *t, char *linkname); +void th_set_device(TAR *t, dev_t device); +void th_set_user(TAR *t, uid_t uid); +void th_set_group(TAR *t, gid_t gid); +void th_set_mode(TAR *t, mode_t fmode); +#define th_set_mtime(t, fmtime) \ + int_to_oct_nonull((fmtime), (t)->th_buf.mtime, 12) +#define th_set_size(t, fsize) \ + int_to_oct_nonull((fsize), (t)->th_buf.size, 12) + +/* encode everything at once (except the pathname and linkname) */ +void th_set_from_stat(TAR *t, struct stat *s); + +/* encode magic, version, and crc - must be done after everything else is set */ +void th_finish(TAR *t); + + +/***** extract.c ***********************************************************/ + +int tar_set_openfunc(TAR *t, openfunc_t open); + +/* sequentially extract next file from t */ +int tar_extract_file(TAR *t, char *realname); + +/* extract different file types */ +int tar_extract_dir(TAR *t, char *realname); +int tar_extract_hardlink(TAR *t, char *realname); +int tar_extract_symlink(TAR *t, char *realname); +int tar_extract_chardev(TAR *t, char *realname); +int tar_extract_blockdev(TAR *t, char *realname); +int tar_extract_fifo(TAR *t, char *realname); + +/* for regfiles, we need to extract the content blocks as well */ +int tar_extract_regfile(TAR *t, char *realname); +int tar_skip_regfile(TAR *t); + + +/***** output.c ************************************************************/ + +/* print the tar header */ +void th_print(TAR *t); + +/* print "ls -l"-like output for the file described by th */ +void th_print_long_ls(TAR *t); + + +/***** util.c *************************************************************/ + +/* hashing function for pathnames */ +int path_hashfunc(char *key, int numbuckets); + +/* matching function for dev_t's */ +int dev_match(dev_t *dev1, dev_t *dev2); + +/* matching function for ino_t's */ +int ino_match(ino_t *ino1, ino_t *ino2); + +/* hashing function for dev_t's */ +int dev_hash(dev_t *dev); + +/* hashing function for ino_t's */ +int ino_hash(ino_t *inode); + +/* create any necessary dirs */ +int mkdirhier(char *path); + +/* calculate header checksum */ +int th_crc_calc(TAR *t); +#define th_crc_ok(t) (th_get_crc(t) == th_crc_calc(t)) + +/* string-octal to integer conversion */ +int oct_to_int(char *oct); + +/* integer to NULL-terminated string-octal conversion */ +#define int_to_oct(num, oct, octlen) \ + snprintf((oct), (octlen), "%*lo ", (octlen) - 2, (unsigned long)(num)) + +/* integer to string-octal conversion, no NULL */ +void int_to_oct_nonull(int num, char *oct, size_t octlen); + + +/***** wrapper.c **********************************************************/ + +/* extract groups of files */ +int tar_extract_glob(TAR *t, char *globname, char *prefix); +int tar_extract_all(TAR *t, char *prefix); + +/* add a whole tree of files */ +int tar_append_tree(TAR *t, char *realdir, char *savedir); + + +#ifdef __cplusplus +} +#endif + +#endif /* ! LIBTAR_H */ + diff --git a/headers/libtar_listhash.h b/headers/libtar_listhash.h new file mode 100644 index 0000000..fa33cfd --- /dev/null +++ b/headers/libtar_listhash.h @@ -0,0 +1,196 @@ +/* listhash/libtar_listhash.h. Generated from listhash.h.in by configure. */ + +/* +** Copyright 1998-2002 University of Illinois Board of Trustees +** Copyright 1998-2002 Mark D. Roth +** All rights reserved. +** +** libtar_listhash.h - header file for listhash module +** +** Mark D. Roth +** Campus Information Technologies and Educational Services +** University of Illinois at Urbana-Champaign +*/ + +#ifndef libtar_LISTHASH_H +#define libtar_LISTHASH_H + + +/***** list.c **********************************************************/ + +/* +** Comparison function (used to determine order of elements in a list) +** returns less than, equal to, or greater than 0 +** if data1 is less than, equal to, or greater than data2 +*/ +typedef int (*libtar_cmpfunc_t)(void *, void *); + +/* +** Free function (for freeing allocated memory in each element) +*/ +typedef void (*libtar_freefunc_t)(void *); + +/* +** Plugin function for libtar_list_iterate() +*/ +typedef int (*libtar_iterate_func_t)(void *, void *); + +/* +** Matching function (used to find elements in a list) +** first argument is the data to search for +** second argument is the list element it's being compared to +** returns 0 if no match is found, non-zero otherwise +*/ +typedef int (*libtar_matchfunc_t)(void *, void *); + + +struct libtar_node +{ + void *data; + struct libtar_node *next; + struct libtar_node *prev; +}; +typedef struct libtar_node *libtar_listptr_t; + +struct libtar_list +{ + libtar_listptr_t first; + libtar_listptr_t last; + libtar_cmpfunc_t cmpfunc; + int flags; + unsigned int nents; +}; +typedef struct libtar_list libtar_list_t; + + +/* values for flags */ +#define LIST_USERFUNC 0 /* use cmpfunc() to order */ +#define LIST_STACK 1 /* new elements go in front */ +#define LIST_QUEUE 2 /* new elements go at the end */ + + +/* reset a list pointer */ +void libtar_listptr_reset(libtar_listptr_t *); + +/* retrieve the data being pointed to */ +void *libtar_listptr_data(libtar_listptr_t *); + +/* creates a new, empty list */ +libtar_list_t *libtar_list_new(int, libtar_cmpfunc_t); + +/* call a function for every element in a list */ +int libtar_list_iterate(libtar_list_t *, + libtar_iterate_func_t, void *); + +/* empty the list */ +void libtar_list_empty(libtar_list_t *, + libtar_freefunc_t); + +/* remove and free() the entire list */ +void libtar_list_free(libtar_list_t *, + libtar_freefunc_t); + +/* add elements */ +int libtar_list_add(libtar_list_t *, void *); + +/* removes an element from the list - returns -1 on error */ +void libtar_list_del(libtar_list_t *, + libtar_listptr_t *); + +/* returns 1 when valid data is returned, or 0 at end of list */ +int libtar_list_next(libtar_list_t *, + libtar_listptr_t *); + +/* returns 1 when valid data is returned, or 0 at end of list */ +int libtar_list_prev(libtar_list_t *, + libtar_listptr_t *); + +/* return 1 if the data matches a list entry, 0 otherwise */ +int libtar_list_search(libtar_list_t *, + libtar_listptr_t *, void *, + libtar_matchfunc_t); + +/* return number of elements from list */ +unsigned int libtar_list_nents(libtar_list_t *); + +/* adds elements from a string delimited by delim */ +int libtar_list_add_str(libtar_list_t *, char *, char *); + +/* string matching function */ +int libtar_str_match(char *, char *); + + +/***** hash.c **********************************************************/ + +/* +** Hashing function (determines which bucket the given key hashes into) +** first argument is the key to hash +** second argument is the total number of buckets +** returns the bucket number +*/ +typedef unsigned int (*libtar_hashfunc_t)(void *, unsigned int); + + +struct libtar_hashptr +{ + int bucket; + libtar_listptr_t node; +}; +typedef struct libtar_hashptr libtar_hashptr_t; + +struct libtar_hash +{ + int numbuckets; + libtar_list_t **table; + libtar_hashfunc_t hashfunc; + unsigned int nents; +}; +typedef struct libtar_hash libtar_hash_t; + + +/* reset a hash pointer */ +void libtar_hashptr_reset(libtar_hashptr_t *); + +/* retrieve the data being pointed to */ +void *libtar_hashptr_data(libtar_hashptr_t *); + +/* default hash function, optimized for 7-bit strings */ +unsigned int libtar_str_hashfunc(char *, unsigned int); + +/* return number of elements from hash */ +unsigned int libtar_hash_nents(libtar_hash_t *); + +/* create a new hash */ +libtar_hash_t *libtar_hash_new(int, libtar_hashfunc_t); + +/* empty the hash */ +void libtar_hash_empty(libtar_hash_t *, + libtar_freefunc_t); + +/* delete all the libtar_nodes of the hash and clean up */ +void libtar_hash_free(libtar_hash_t *, + libtar_freefunc_t); + +/* returns 1 when valid data is returned, or 0 at end of list */ +int libtar_hash_next(libtar_hash_t *, + libtar_hashptr_t *); + +/* return 1 if the data matches a list entry, 0 otherwise */ +int libtar_hash_search(libtar_hash_t *, + libtar_hashptr_t *, void *, + libtar_matchfunc_t); + +/* return 1 if the key matches a list entry, 0 otherwise */ +int libtar_hash_getkey(libtar_hash_t *, + libtar_hashptr_t *, void *, + libtar_matchfunc_t); + +/* inserting data */ +int libtar_hash_add(libtar_hash_t *, void *); + +/* delete an entry */ +int libtar_hash_del(libtar_hash_t *, + libtar_hashptr_t *); + +#endif /* ! libtar_LISTHASH_H */ + diff --git a/headers/lzma.h b/headers/lzma.h new file mode 100644 index 0000000..44de60a --- /dev/null +++ b/headers/lzma.h @@ -0,0 +1,321 @@ +/** + * \file api/lzma.h + * \brief The public API of liblzma data compression library + * + * liblzma is a public domain general-purpose data compression library with + * a zlib-like API. The native file format is .xz, but also the old .lzma + * format and raw (no headers) streams are supported. Multiple compression + * algorithms (filters) are supported. Currently LZMA2 is the primary filter. + * + * liblzma is part of XZ Utils . XZ Utils includes + * a gzip-like command line tool named xz and some other tools. XZ Utils + * is developed and maintained by Lasse Collin. + * + * Major parts of liblzma are based on Igor Pavlov's public domain LZMA SDK + * . + * + * The SHA-256 implementation is based on the public domain code found from + * 7-Zip , which has a modified version of the public + * domain SHA-256 code found from Crypto++ . + * The SHA-256 code in Crypto++ was written by Kevin Springle and Wei Dai. + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + */ + +#ifndef LZMA_H +#define LZMA_H + +/***************************** + * Required standard headers * + *****************************/ + +/* + * liblzma API headers need some standard types and macros. To allow + * including lzma.h without requiring the application to include other + * headers first, lzma.h includes the required standard headers unless + * they already seem to be included already or if LZMA_MANUAL_HEADERS + * has been defined. + * + * Here's what types and macros are needed and from which headers: + * - stddef.h: size_t, NULL + * - stdint.h: uint8_t, uint32_t, uint64_t, UINT32_C(n), uint64_C(n), + * UINT32_MAX, UINT64_MAX + * + * However, inttypes.h is a little more portable than stdint.h, although + * inttypes.h declares some unneeded things compared to plain stdint.h. + * + * The hacks below aren't perfect, specifically they assume that inttypes.h + * exists and that it typedefs at least uint8_t, uint32_t, and uint64_t, + * and that, in case of incomplete inttypes.h, unsigned int is 32-bit. + * If the application already takes care of setting up all the types and + * macros properly (for example by using gnulib's stdint.h or inttypes.h), + * we try to detect that the macros are already defined and don't include + * inttypes.h here again. However, you may define LZMA_MANUAL_HEADERS to + * force this file to never include any system headers. + * + * Some could argue that liblzma API should provide all the required types, + * for example lzma_uint64, LZMA_UINT64_C(n), and LZMA_UINT64_MAX. This was + * seen unnecessary mess, since most systems already provide all the necessary + * types and macros in the standard headers. + * + * Note that liblzma API still has lzma_bool, because using stdbool.h would + * break C89 and C++ programs on many systems. sizeof(bool) in C99 isn't + * necessarily the same as sizeof(bool) in C++. + */ + +#ifndef LZMA_MANUAL_HEADERS + /* + * I suppose this works portably also in C++. Note that in C++, + * we need to get size_t into the global namespace. + */ +# include + + /* + * Skip inttypes.h if we already have all the required macros. If we + * have the macros, we assume that we have the matching typedefs too. + */ +# if !defined(UINT32_C) || !defined(UINT64_C) \ + || !defined(UINT32_MAX) || !defined(UINT64_MAX) + /* + * MSVC has no C99 support, and thus it cannot be used to + * compile liblzma. The liblzma API has to still be usable + * from MSVC, so we need to define the required standard + * integer types here. + */ +# if defined(_WIN32) && defined(_MSC_VER) + typedef unsigned __int8 uint8_t; + typedef unsigned __int32 uint32_t; + typedef unsigned __int64 uint64_t; +# else + /* Use the standard inttypes.h. */ +# ifdef __cplusplus + /* + * C99 sections 7.18.2 and 7.18.4 specify that + * in C++ implementations define the limit + * and constant macros only if specifically + * requested. Note that if you want the + * format macros (PRIu64 etc.) too, you need + * to define __STDC_FORMAT_MACROS before + * including lzma.h, since re-including + * inttypes.h with __STDC_FORMAT_MACROS + * defined doesn't necessarily work. + */ +# ifndef __STDC_LIMIT_MACROS +# define __STDC_LIMIT_MACROS 1 +# endif +# ifndef __STDC_CONSTANT_MACROS +# define __STDC_CONSTANT_MACROS 1 +# endif +# endif + +# include +# endif + + /* + * Some old systems have only the typedefs in inttypes.h, and + * lack all the macros. For those systems, we need a few more + * hacks. We assume that unsigned int is 32-bit and unsigned + * long is either 32-bit or 64-bit. If these hacks aren't + * enough, the application has to setup the types manually + * before including lzma.h. + */ +# ifndef UINT32_C +# if defined(_WIN32) && defined(_MSC_VER) +# define UINT32_C(n) n ## UI32 +# else +# define UINT32_C(n) n ## U +# endif +# endif + +# ifndef UINT64_C +# if defined(_WIN32) && defined(_MSC_VER) +# define UINT64_C(n) n ## UI64 +# else + /* Get ULONG_MAX. */ +# include +# if ULONG_MAX == 4294967295UL +# define UINT64_C(n) n ## ULL +# else +# define UINT64_C(n) n ## UL +# endif +# endif +# endif + +# ifndef UINT32_MAX +# define UINT32_MAX (UINT32_C(4294967295)) +# endif + +# ifndef UINT64_MAX +# define UINT64_MAX (UINT64_C(18446744073709551615)) +# endif +# endif +#endif /* ifdef LZMA_MANUAL_HEADERS */ + + +/****************** + * LZMA_API macro * + ******************/ + +/* + * Some systems require (or at least recommend) that the functions and + * function pointers are declared specially in the headers. LZMA_API_IMPORT + * is for importing symbols and LZMA_API_CALL is to specify calling + * convention. + * + * By default it is assumed that the application will link dynamically + * against liblzma. #define LZMA_API_STATIC in your application if you + * want to link against static liblzma. If you don't care about portability + * to operating systems like Windows, or at least don't care about linking + * against static liblzma on them, don't worry about LZMA_API_STATIC. That + * is, most developers will never need to use LZMA_API_STATIC. + * + * Cygwin is a special case on Windows. We rely on GCC doing the right thing + * and thus don't use dllimport and don't specify the calling convention. + */ +#ifndef LZMA_API_IMPORT +# if !defined(LZMA_API_STATIC) && defined(_WIN32) && !defined(__CYGWIN__) +# define LZMA_API_IMPORT __declspec(dllimport) +# else +# define LZMA_API_IMPORT +# endif +#endif + +#ifndef LZMA_API_CALL +# if defined(_WIN32) && !defined(__CYGWIN__) +# define LZMA_API_CALL __cdecl +# else +# define LZMA_API_CALL +# endif +#endif + +#ifndef LZMA_API +# define LZMA_API(type) LZMA_API_IMPORT type LZMA_API_CALL +#endif + + +/*********** + * nothrow * + ***********/ + +/* + * None of the functions in liblzma may throw an exception. Even + * the functions that use callback functions won't throw exceptions, + * because liblzma would break if a callback function threw an exception. + */ +#ifndef lzma_nothrow +# if defined(__cplusplus) +# define lzma_nothrow throw() +# elif __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4) +# define lzma_nothrow __attribute__((__nothrow__)) +# else +# define lzma_nothrow +# endif +#endif + + +/******************** + * GNU C extensions * + ********************/ + +/* + * GNU C extensions are used conditionally in the public API. It doesn't + * break anything if these are sometimes enabled and sometimes not, only + * affects warnings and optimizations. + */ +#if __GNUC__ >= 3 +# ifndef lzma_attribute +# define lzma_attribute(attr) __attribute__(attr) +# endif + +# ifndef lzma_restrict +# define lzma_restrict __restrict__ +# endif + + /* warn_unused_result was added in GCC 3.4. */ +# ifndef lzma_attr_warn_unused_result +# if __GNUC__ == 3 && __GNUC_MINOR__ < 4 +# define lzma_attr_warn_unused_result +# endif +# endif + +#else +# ifndef lzma_attribute +# define lzma_attribute(attr) +# endif + +# ifndef lzma_restrict +# if __STDC_VERSION__ >= 199901L +# define lzma_restrict restrict +# else +# define lzma_restrict +# endif +# endif +#endif + + +#ifndef lzma_attr_pure +# define lzma_attr_pure lzma_attribute((__pure__)) +#endif + +#ifndef lzma_attr_const +# define lzma_attr_const lzma_attribute((__const__)) +#endif + +#ifndef lzma_attr_warn_unused_result +# define lzma_attr_warn_unused_result \ + lzma_attribute((__warn_unused_result__)) +#endif + + +/************** + * Subheaders * + **************/ + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * Subheaders check that this is defined. It is to prevent including + * them directly from applications. + */ +#define LZMA_H_INTERNAL 1 + +/* Basic features */ +#include "lzma/version.h" +#include "lzma/base.h" +#include "lzma/vli.h" +#include "lzma/check.h" + +/* Filters */ +#include "lzma/filter.h" +#include "lzma/subblock.h" +#include "lzma/bcj.h" +#include "lzma/delta.h" +#include "lzma/lzma.h" + +/* Container formats */ +#include "lzma/container.h" + +/* Advanced features */ +#include "lzma/stream_flags.h" +#include "lzma/block.h" +#include "lzma/index.h" +#include "lzma/index_hash.h" + +/* + * All subheaders included. Undefine LZMA_H_INTERNAL to prevent applications + * re-including the subheaders. + */ +#undef LZMA_H_INTERNAL + +#ifdef __cplusplus +} +#endif + +#endif /* ifndef LZMA_H */ diff --git a/headers/lzma/base.h b/headers/lzma/base.h new file mode 100644 index 0000000..0155506 --- /dev/null +++ b/headers/lzma/base.h @@ -0,0 +1,596 @@ +/** + * \file lzma/base.h + * \brief Data types and functions used in many places in liblzma API + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/** + * \brief Boolean + * + * This is here because C89 doesn't have stdbool.h. To set a value for + * variables having type lzma_bool, you can use + * - C99's `true' and `false' from stdbool.h; + * - C++'s internal `true' and `false'; or + * - integers one (true) and zero (false). + */ +typedef unsigned char lzma_bool; + + +/** + * \brief Type of reserved enumeration variable in structures + * + * To avoid breaking library ABI when new features are added, several + * structures contain extra variables that may be used in future. Since + * sizeof(enum) can be different than sizeof(int), and sizeof(enum) may + * even vary depending on the range of enumeration constants, we specify + * a separate type to be used for reserved enumeration variables. All + * enumeration constants in liblzma API will be non-negative and less + * than 128, which should guarantee that the ABI won't break even when + * new constants are added to existing enumerations. + */ +typedef enum { + LZMA_RESERVED_ENUM = 0 +} lzma_reserved_enum; + + +/** + * \brief Return values used by several functions in liblzma + * + * Check the descriptions of specific functions to find out which return + * values they can return. With some functions the return values may have + * more specific meanings than described here; those differences are + * described per-function basis. + */ +typedef enum { + LZMA_OK = 0, + /**< + * \brief Operation completed successfully + */ + + LZMA_STREAM_END = 1, + /**< + * \brief End of stream was reached + * + * In encoder, LZMA_SYNC_FLUSH, LZMA_FULL_FLUSH, or + * LZMA_FINISH was finished. In decoder, this indicates + * that all the data was successfully decoded. + * + * In all cases, when LZMA_STREAM_END is returned, the last + * output bytes should be picked from strm->next_out. + */ + + LZMA_NO_CHECK = 2, + /**< + * \brief Input stream has no integrity check + * + * This return value can be returned only if the + * LZMA_TELL_NO_CHECK flag was used when initializing + * the decoder. LZMA_NO_CHECK is just a warning, and + * the decoding can be continued normally. + * + * It is possible to call lzma_get_check() immediatelly after + * lzma_code has returned LZMA_NO_CHECK. The result will + * naturally be LZMA_CHECK_NONE, but the possibility to call + * lzma_get_check() may be convenient in some applications. + */ + + LZMA_UNSUPPORTED_CHECK = 3, + /**< + * \brief Cannot calculate the integrity check + * + * The usage of this return value is different in encoders + * and decoders. + * + * Encoders can return this value only from the initialization + * function. If initialization fails with this value, the + * encoding cannot be done, because there's no way to produce + * output with the correct integrity check. + * + * Decoders can return this value only from lzma_code() and + * only if the LZMA_TELL_UNSUPPORTED_CHECK flag was used when + * initializing the decoder. The decoding can still be + * continued normally even if the check type is unsupported, + * but naturally the check will not be validated, and possible + * errors may go undetected. + * + * With decoder, it is possible to call lzma_get_check() + * immediatelly after lzma_code() has returned + * LZMA_UNSUPPORTED_CHECK. This way it is possible to find + * out what the unsupported Check ID was. + */ + + LZMA_GET_CHECK = 4, + /**< + * \brief Integrity check type is now available + * + * This value can be returned only by the lzma_code() function + * and only if the decoder was initialized with the + * LZMA_TELL_ANY_CHECK flag. LZMA_GET_CHECK tells the + * application that it may now call lzma_get_check() to find + * out the Check ID. This can be used, for example, to + * implement a decoder that accepts only files that have + * strong enough integrity check. + */ + + LZMA_MEM_ERROR = 5, + /**< + * \brief Cannot allocate memory + * + * Memory allocation failed, or the size of the allocation + * would be greater than SIZE_MAX. + * + * Due to internal implementation reasons, the coding cannot + * be continued even if more memory were made available after + * LZMA_MEM_ERROR. + */ + + LZMA_MEMLIMIT_ERROR = 6, + /** + * \brief Memory usage limit was reached + * + * Decoder would need more memory than allowed by the + * specified memory usage limit. To continue decoding, + * the memory usage limit has to be increased with + * lzma_memlimit_set(). + */ + + LZMA_FORMAT_ERROR = 7, + /**< + * \brief File format not recognized + * + * The decoder did not recognize the input as supported file + * format. This error can occur, for example, when trying to + * decode .lzma format file with lzma_stream_decoder, + * because lzma_stream_decoder accepts only the .xz format. + */ + + LZMA_OPTIONS_ERROR = 8, + /**< + * \brief Invalid or unsupported options + * + * Invalid or unsupported options, for example + * - unsupported filter(s) or filter options; or + * - reserved bits set in headers (decoder only). + * + * Rebuilding liblzma with more features enabled, or + * upgrading to a newer version of liblzma may help. + */ + + LZMA_DATA_ERROR = 9, + /**< + * \brief Data is corrupt + * + * The usage of this return value is different in encoders + * and decoders. In both encoder and decoder, the coding + * cannot continue after this error. + * + * Encoders return this if size limits of the target file + * format would be exceeded. These limits are huge, thus + * getting this error from an encoder is mostly theoretical. + * For example, the maximum compressed and uncompressed + * size of a .xz Stream is roughly 8 EiB (2^63 bytes). + * + * Decoders return this error if the input data is corrupt. + * This can mean, for example, invalid CRC32 in headers + * or invalid check of uncompressed data. + */ + + LZMA_BUF_ERROR = 10, + /**< + * \brief No progress is possible + * + * This error code is returned when the coder cannot consume + * any new input and produce any new output. The most common + * reason for this error is that the input stream being + * decoded is truncated or corrupt. + * + * This error is not fatal. Coding can be continued normally + * by providing more input and/or more output space, if + * possible. + * + * Typically the first call to lzma_code() that can do no + * progress returns LZMA_OK instead of LZMA_BUF_ERROR. Only + * the second consecutive call doing no progress will return + * LZMA_BUF_ERROR. This is intentional. + * + * With zlib, Z_BUF_ERROR may be returned even if the + * application is doing nothing wrong, so apps will need + * to handle Z_BUF_ERROR specially. The above hack + * guarantees that liblzma never returns LZMA_BUF_ERROR + * to properly written applications unless the input file + * is truncated or corrupt. This should simplify the + * applications a little. + */ + + LZMA_PROG_ERROR = 11, + /**< + * \brief Programming error + * + * This indicates that the arguments given to the function are + * invalid or the internal state of the decoder is corrupt. + * - Function arguments are invalid or the structures + * pointed by the argument pointers are invalid + * e.g. if strm->next_out has been set to NULL and + * strm->avail_out > 0 when calling lzma_code(). + * - lzma_* functions have been called in wrong order + * e.g. lzma_code() was called right after lzma_end(). + * - If errors occur randomly, the reason might be flaky + * hardware. + * + * If you think that your code is correct, this error code + * can be a sign of a bug in liblzma. See the documentation + * how to report bugs. + */ +} lzma_ret; + + +/** + * \brief The `action' argument for lzma_code() + * + * After the first use of LZMA_SYNC_FLUSH, LZMA_FULL_FLUSH, or LZMA_FINISH, + * the same `action' must is used until lzma_code() returns LZMA_STREAM_END. + * Also, the amount of input (that is, strm->avail_in) must not be modified + * by the application until lzma_code() returns LZMA_STREAM_END. Changing the + * `action' or modifying the amount of input will make lzma_code() return + * LZMA_PROG_ERROR. + */ +typedef enum { + LZMA_RUN = 0, + /**< + * \brief Continue coding + * + * Encoder: Encode as much input as possible. Some internal + * buffering will probably be done (depends on the filter + * chain in use), which causes latency: the input used won't + * usually be decodeable from the output of the same + * lzma_code() call. + * + * Decoder: Decode as much input as possible and produce as + * much output as possible. + */ + + LZMA_SYNC_FLUSH = 1, + /**< + * \brief Make all the input available at output + * + * Normally the encoder introduces some latency. + * LZMA_SYNC_FLUSH forces all the buffered data to be + * available at output without resetting the internal + * state of the encoder. This way it is possible to use + * compressed stream for example for communication over + * network. + * + * Only some filters support LZMA_SYNC_FLUSH. Trying to use + * LZMA_SYNC_FLUSH with filters that don't support it will + * make lzma_code() return LZMA_OPTIONS_ERROR. For example, + * LZMA1 doesn't support LZMA_SYNC_FLUSH but LZMA2 does. + * + * Using LZMA_SYNC_FLUSH very often can dramatically reduce + * the compression ratio. With some filters (for example, + * LZMA2), finetuning the compression options may help + * mitigate this problem significantly. + * + * Decoders don't support LZMA_SYNC_FLUSH. + */ + + LZMA_FULL_FLUSH = 2, + /**< + * \brief Make all the input available at output + * + * Finish encoding of the current Block. All the input + * data going to the current Block must have been given + * to the encoder (the last bytes can still be pending in + * next_in). Call lzma_code() with LZMA_FULL_FLUSH until + * it returns LZMA_STREAM_END. Then continue normally with + * LZMA_RUN or finish the Stream with LZMA_FINISH. + * + * This action is currently supported only by Stream encoder + * and easy encoder (which uses Stream encoder). If there is + * no unfinished Block, no empty Block is created. + */ + + LZMA_FINISH = 3 + /**< + * \brief Finish the coding operation + * + * Finishes the coding operation. All the input data must + * have been given to the encoder (the last bytes can still + * be pending in next_in). Call lzma_code() with LZMA_FINISH + * until it returns LZMA_STREAM_END. Once LZMA_FINISH has + * been used, the amount of input must no longer be changed + * by the application. + * + * When decoding, using LZMA_FINISH is optional unless the + * LZMA_CONCATENATED flag was used when the decoder was + * initialized. When LZMA_CONCATENATED was not used, the only + * effect of LZMA_FINISH is that the amount of input must not + * be changed just like in the encoder. + */ +} lzma_action; + + +/** + * \brief Custom functions for memory handling + * + * A pointer to lzma_allocator may be passed via lzma_stream structure + * to liblzma, and some advanced functions take a pointer to lzma_allocator + * as a separate function argument. The library will use the functions + * specified in lzma_allocator for memory handling instead of the default + * malloc() and free(). C++ users should note that the custom memory + * handling functions must not throw exceptions. + * + * liblzma doesn't make an internal copy of lzma_allocator. Thus, it is + * OK to change these function pointers in the middle of the coding + * process, but obviously it must be done carefully to make sure that the + * replacement `free' can deallocate memory allocated by the earlier + * `alloc' function(s). + */ +typedef struct { + /** + * \brief Pointer to a custom memory allocation function + * + * If you don't want a custom allocator, but still want + * custom free(), set this to NULL and liblzma will use + * the standard malloc(). + * + * \param opaque lzma_allocator.opaque (see below) + * \param nmemb Number of elements like in calloc(). liblzma + * will always set nmemb to 1, so it is safe to + * ignore nmemb in a custom allocator if you like. + * The nmemb argument exists only for + * compatibility with zlib and libbzip2. + * \param size Size of an element in bytes. + * liblzma never sets this to zero. + * + * \return Pointer to the beginning of a memory block of + * `size' bytes, or NULL if allocation fails + * for some reason. When allocation fails, functions + * of liblzma return LZMA_MEM_ERROR. + * + * The allocator should not waste time zeroing the allocated buffers. + * This is not only about speed, but also memory usage, since the + * operating system kernel doesn't necessarily allocate the requested + * memory in physical memory until it is actually used. With small + * input files, liblzma may actually need only a fraction of the + * memory that it requested for allocation. + * + * \note LZMA_MEM_ERROR is also used when the size of the + * allocation would be greater than SIZE_MAX. Thus, + * don't assume that the custom allocator must have + * returned NULL if some function from liblzma + * returns LZMA_MEM_ERROR. + */ + void *(LZMA_API_CALL *alloc)(void *opaque, size_t nmemb, size_t size); + + /** + * \brief Pointer to a custom memory freeing function + * + * If you don't want a custom freeing function, but still + * want a custom allocator, set this to NULL and liblzma + * will use the standard free(). + * + * \param opaque lzma_allocator.opaque (see below) + * \param ptr Pointer returned by lzma_allocator.alloc(), + * or when it is set to NULL, a pointer returned + * by the standard malloc(). + */ + void (LZMA_API_CALL *free)(void *opaque, void *ptr); + + /** + * \brief Pointer passed to .alloc() and .free() + * + * opaque is passed as the first argument to lzma_allocator.alloc() + * and lzma_allocator.free(). This intended to ease implementing + * custom memory allocation functions for use with liblzma. + * + * If you don't need this, you should set this to NULL. + */ + void *opaque; + +} lzma_allocator; + + +/** + * \brief Internal data structure + * + * The contents of this structure is not visible outside the library. + */ +typedef struct lzma_internal_s lzma_internal; + + +/** + * \brief Passing data to and from liblzma + * + * The lzma_stream structure is used for + * - passing pointers to input and output buffers to liblzma; + * - defining custom memory hander functions; and + * - holding a pointer to coder-specific internal data structures. + * + * Typical usage: + * + * - After allocating lzma_stream (on stack or with malloc()), it must be + * initialized to LZMA_STREAM_INIT (see LZMA_STREAM_INIT for details). + * + * - Initialize a coder to the lzma_stream, for example by using + * lzma_easy_encoder() or lzma_auto_decoder(). Some notes: + * - In contrast to zlib, strm->next_in and strm->next_out are + * ignored by all initialization functions, thus it is safe + * to not initialize them yet. + * - The initialization functions always set strm->total_in and + * strm->total_out to zero. + * - If the initialization function fails, no memory is left allocated + * that would require freeing with lzma_end() even if some memory was + * associated with the lzma_stream structure when the initialization + * function was called. + * + * - Use lzma_code() to do the actual work. + * + * - Once the coding has been finished, the existing lzma_stream can be + * reused. It is OK to reuse lzma_stream with different initialization + * function without calling lzma_end() first. Old allocations are + * automatically freed. + * + * - Finally, use lzma_end() to free the allocated memory. lzma_end() never + * frees the lzma_stream structure itself. + * + * Application may modify the values of total_in and total_out as it wants. + * They are updated by liblzma to match the amount of data read and + * written, but aren't used for anything else. + */ +typedef struct { + const uint8_t *next_in; /**< Pointer to the next input byte. */ + size_t avail_in; /**< Number of available input bytes in next_in. */ + uint64_t total_in; /**< Total number of bytes read by liblzma. */ + + uint8_t *next_out; /**< Pointer to the next output position. */ + size_t avail_out; /**< Amount of free space in next_out. */ + uint64_t total_out; /**< Total number of bytes written by liblzma. */ + + /** + * \brief Custom memory allocation functions + * + * In most cases this is NULL which makes liblzma use + * the standard malloc() and free(). + */ + lzma_allocator *allocator; + + /** Internal state is not visible to applications. */ + lzma_internal *internal; + + /* + * Reserved space to allow possible future extensions without + * breaking the ABI. Excluding the initialization of this structure, + * you should not touch these, because the names of these variables + * may change. + */ + void *reserved_ptr1; + void *reserved_ptr2; + uint64_t reserved_int1; + uint64_t reserved_int2; + lzma_reserved_enum reserved_enum1; + lzma_reserved_enum reserved_enum2; + +} lzma_stream; + + +/** + * \brief Initialization for lzma_stream + * + * When you declare an instance of lzma_stream, you can immediatelly + * initialize it so that initialization functions know that no memory + * has been allocated yet: + * + * lzma_stream strm = LZMA_STREAM_INIT; + * + * If you need to initialize a dynamically allocated lzma_stream, you can use + * memset(strm_pointer, 0, sizeof(lzma_stream)). Strictly speaking, this + * violates the C standard since NULL may have different internal + * representation than zero, but it should be portable enough in practice. + * Anyway, for maximum portability, you can use something like this: + * + * lzma_stream tmp = LZMA_STREAM_INIT; + * *strm = tmp; + */ +#define LZMA_STREAM_INIT \ + { NULL, 0, 0, NULL, 0, 0, NULL, NULL, \ + NULL, NULL, 0, 0, LZMA_RESERVED_ENUM, LZMA_RESERVED_ENUM } + + +/** + * \brief Encode or decode data + * + * Once the lzma_stream has been successfully initialized (e.g. with + * lzma_stream_encoder()), the actual encoding or decoding is done + * using this function. The application has to update strm->next_in, + * strm->avail_in, strm->next_out, and strm->avail_out to pass input + * to and get output from liblzma. + * + * See the description of the coder-specific initialization function to find + * out what `action' values are supported by the coder. + */ +extern LZMA_API(lzma_ret) lzma_code(lzma_stream *strm, lzma_action action) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Free memory allocated for the coder data structures + * + * \param strm Pointer to lzma_stream that is at least initialized + * with LZMA_STREAM_INIT. + * + * After lzma_end(strm), strm->internal is guaranteed to be NULL. No other + * members of the lzma_stream structure are touched. + * + * \note zlib indicates an error if application end()s unfinished + * stream structure. liblzma doesn't do this, and assumes that + * application knows what it is doing. + */ +extern LZMA_API(void) lzma_end(lzma_stream *strm) lzma_nothrow; + + +/** + * \brief Get the memory usage of decoder filter chain + * + * This function is currently supported only when *strm has been initialized + * with a function that takes a memlimit argument. With other functions, you + * should use e.g. lzma_raw_encoder_memusage() or lzma_raw_decoder_memusage() + * to estimate the memory requirements. + * + * This function is useful e.g. after LZMA_MEMLIMIT_ERROR to find out how big + * the memory usage limit should have been to decode the input. Note that + * this may give misleading information if decoding .xz Streams that have + * multiple Blocks, because each Block can have different memory requirements. + * + * \return Rough estimate of how much memory is currently allocated + * for the filter decoders. If no filter chain is currently + * allocated, some non-zero value is still returned, which is + * less than or equal to what any filter chain would indicate + * as its memory requirement. + * + * If this function isn't supported by *strm or some other error + * occurs, zero is returned. + */ +extern LZMA_API(uint64_t) lzma_memusage(const lzma_stream *strm) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Get the current memory usage limit + * + * This function is supported only when *strm has been initialized with + * a function that takes a memlimit argument. + * + * \return On success, the current memory usage limit is returned + * (always non-zero). On error, zero is returned. + */ +extern LZMA_API(uint64_t) lzma_memlimit_get(const lzma_stream *strm) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Set the memory usage limit + * + * This function is supported only when *strm has been initialized with + * a function that takes a memlimit argument. + * + * \return - LZMA_OK: New memory usage limit successfully set. + * - LZMA_MEMLIMIT_ERROR: The new limit is too small. + * The limit was not changed. + * - LZMA_PROG_ERROR: Invalid arguments, e.g. *strm doesn't + * support memory usage limit or memlimit was zero. + */ +extern LZMA_API(lzma_ret) lzma_memlimit_set( + lzma_stream *strm, uint64_t memlimit) lzma_nothrow; diff --git a/headers/lzma/bcj.h b/headers/lzma/bcj.h new file mode 100644 index 0000000..274bf6c --- /dev/null +++ b/headers/lzma/bcj.h @@ -0,0 +1,90 @@ +/** + * \file lzma/bcj.h + * \brief Branch/Call/Jump conversion filters + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/* Filter IDs for lzma_filter.id */ + +#define LZMA_FILTER_X86 LZMA_VLI_C(0x04) + /**< + * Filter for x86 binaries + */ + +#define LZMA_FILTER_POWERPC LZMA_VLI_C(0x05) + /**< + * Filter for Big endian PowerPC binaries + */ + +#define LZMA_FILTER_IA64 LZMA_VLI_C(0x06) + /**< + * Filter for IA64 (Itanium) binaries. + */ + +#define LZMA_FILTER_ARM LZMA_VLI_C(0x07) + /**< + * Filter for ARM binaries. + */ + +#define LZMA_FILTER_ARMTHUMB LZMA_VLI_C(0x08) + /**< + * Filter for ARMThumb binaries. + */ + +#define LZMA_FILTER_SPARC LZMA_VLI_C(0x09) + /**< + * Filter for SPARC binaries. + */ + + +/** + * \brief Options for BCJ filters + * + * The BCJ filters never change the size of the data. Specifying options + * for them is optional: if pointer to options is NULL, default value is + * used. You probably never need to specify options to BCJ filters, so just + * set the options pointer to NULL and be happy. + * + * If options with non-default values have been specified when encoding, + * the same options must also be specified when decoding. + * + * \note At the moment, none of the BCJ filters support + * LZMA_SYNC_FLUSH. If LZMA_SYNC_FLUSH is specified, + * LZMA_OPTIONS_ERROR will be returned. If there is need, + * partial support for LZMA_SYNC_FLUSH can be added in future. + * Partial means that flushing would be possible only at + * offsets that are multiple of 2, 4, or 16 depending on + * the filter, except x86 which cannot be made to support + * LZMA_SYNC_FLUSH predictably. + */ +typedef struct { + /** + * \brief Start offset for conversions + * + * This setting is useful only when the same filter is used + * _separately_ for multiple sections of the same executable file, + * and the sections contain cross-section branch/call/jump + * instructions. In that case it is benefical to set the start + * offset of the non-first sections so that the relative addresses + * of the cross-section branch/call/jump instructions will use the + * same absolute addresses as in the first section. + * + * When the pointer to options is NULL, the default value (zero) + * is used. + */ + uint32_t start_offset; + +} lzma_options_bcj; diff --git a/headers/lzma/block.h b/headers/lzma/block.h new file mode 100644 index 0000000..10e9744 --- /dev/null +++ b/headers/lzma/block.h @@ -0,0 +1,534 @@ +/** + * \file lzma/block.h + * \brief .xz Block handling + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/** + * \brief Options for the Block and Block Header encoders and decoders + * + * Different Block handling functions use different parts of this structure. + * Some read some members, other functions write, and some do both. Only the + * members listed for reading need to be initialized when the specified + * functions are called. The members marked for writing will be assigned + * new values at some point either by calling the given function or by + * later calls to lzma_code(). + */ +typedef struct { + /** + * \brief Block format version + * + * To prevent API and ABI breakages if new features are needed in + * Block, a version number is used to indicate which fields in this + * structure are in use. For now, version must always be zero. + * With non-zero version, most Block related functions will return + * LZMA_OPTIONS_ERROR. + * + * The decoding functions will always set this to the lowest value + * that supports all the features indicated by the Block Header field. + * The application must check that the version number set by the + * decoding functions is supported by the application. Otherwise it + * is possible that the application will decode the Block incorrectly. + * + * Read by: + * - lzma_block_header_size() + * - lzma_block_header_encode() + * - lzma_block_compressed_size() + * - lzma_block_unpadded_size() + * - lzma_block_total_size() + * - lzma_block_encoder() + * - lzma_block_decoder() + * - lzma_block_buffer_encode() + * - lzma_block_buffer_decode() + * + * Written by: + * - lzma_block_header_decode() + */ + uint32_t version; + + /** + * \brief Size of the Block Header field + * + * This is always a multiple of four. + * + * Read by: + * - lzma_block_header_encode() + * - lzma_block_header_decode() + * - lzma_block_compressed_size() + * - lzma_block_unpadded_size() + * - lzma_block_total_size() + * - lzma_block_decoder() + * - lzma_block_buffer_decode() + * + * Written by: + * - lzma_block_header_size() + * - lzma_block_buffer_encode() + */ + uint32_t header_size; +# define LZMA_BLOCK_HEADER_SIZE_MIN 8 +# define LZMA_BLOCK_HEADER_SIZE_MAX 1024 + + /** + * \brief Type of integrity Check + * + * The Check ID is not stored into the Block Header, thus its value + * must be provided also when decoding. + * + * Read by: + * - lzma_block_header_encode() + * - lzma_block_header_decode() + * - lzma_block_compressed_size() + * - lzma_block_unpadded_size() + * - lzma_block_total_size() + * - lzma_block_encoder() + * - lzma_block_decoder() + * - lzma_block_buffer_encode() + * - lzma_block_buffer_decode() + */ + lzma_check check; + + /** + * \brief Size of the Compressed Data in bytes + * + * Encoding: If this is not LZMA_VLI_UNKNOWN, Block Header encoder + * will store this value to the Block Header. Block encoder doesn't + * care about this value, but will set it once the encoding has been + * finished. + * + * Decoding: If this is not LZMA_VLI_UNKNOWN, Block decoder will + * verify that the size of the Compressed Data field matches + * compressed_size. + * + * Usually you don't know this value when encoding in streamed mode, + * and thus cannot write this field into the Block Header. + * + * In non-streamed mode you can reserve space for this field before + * encoding the actual Block. After encoding the data, finish the + * Block by encoding the Block Header. Steps in detail: + * + * - Set compressed_size to some big enough value. If you don't know + * better, use LZMA_VLI_MAX, but remember that bigger values take + * more space in Block Header. + * + * - Call lzma_block_header_size() to see how much space you need to + * reserve for the Block Header. + * + * - Encode the Block using lzma_block_encoder() and lzma_code(). + * It sets compressed_size to the correct value. + * + * - Use lzma_block_header_encode() to encode the Block Header. + * Because space was reserved in the first step, you don't need + * to call lzma_block_header_size() anymore, because due to + * reserving, header_size has to be big enough. If it is "too big", + * lzma_block_header_encode() will add enough Header Padding to + * make Block Header to match the size specified by header_size. + * + * Read by: + * - lzma_block_header_size() + * - lzma_block_header_encode() + * - lzma_block_compressed_size() + * - lzma_block_unpadded_size() + * - lzma_block_total_size() + * - lzma_block_decoder() + * - lzma_block_buffer_decode() + * + * Written by: + * - lzma_block_header_decode() + * - lzma_block_compressed_size() + * - lzma_block_encoder() + * - lzma_block_decoder() + * - lzma_block_buffer_encode() + * - lzma_block_buffer_decode() + */ + lzma_vli compressed_size; + + /** + * \brief Uncompressed Size in bytes + * + * This is handled very similarly to compressed_size above. + * + * uncompressed_size is needed by fewer functions than + * compressed_size. This is because uncompressed_size isn't + * needed to validate that Block stays within proper limits. + * + * Read by: + * - lzma_block_header_size() + * - lzma_block_header_encode() + * - lzma_block_decoder() + * - lzma_block_buffer_decode() + * + * Written by: + * - lzma_block_header_decode() + * - lzma_block_encoder() + * - lzma_block_decoder() + * - lzma_block_buffer_encode() + * - lzma_block_buffer_decode() + */ + lzma_vli uncompressed_size; + + /** + * \brief Array of filters + * + * There can be 1-4 filters. The end of the array is marked with + * .id = LZMA_VLI_UNKNOWN. + * + * Read by: + * - lzma_block_header_size() + * - lzma_block_header_encode() + * - lzma_block_encoder() + * - lzma_block_decoder() + * - lzma_block_buffer_encode() + * - lzma_block_buffer_decode() + * + * Written by: + * - lzma_block_header_decode(): Note that this does NOT free() + * the old filter options structures. All unused filters[] will + * have .id == LZMA_VLI_UNKNOWN and .options == NULL. If + * decoding fails, all filters[] are guaranteed to be + * LZMA_VLI_UNKNOWN and NULL. + * + * \note Because of the array is terminated with + * .id = LZMA_VLI_UNKNOWN, the actual array must + * have LZMA_FILTERS_MAX + 1 members or the Block + * Header decoder will overflow the buffer. + */ + lzma_filter *filters; + + /** + * \brief Raw value stored in the Check field + * + * After successful coding, the first lzma_check_size(check) bytes + * of this array contain the raw value stored in the Check field. + * + * Note that CRC32 and CRC64 are stored in little endian byte order. + * Take it into account if you display the Check values to the user. + * + * Written by: + * - lzma_block_encoder() + * - lzma_block_decoder() + * - lzma_block_buffer_encode() + * - lzma_block_buffer_decode() + */ + uint8_t raw_check[LZMA_CHECK_SIZE_MAX]; + + /* + * Reserved space to allow possible future extensions without + * breaking the ABI. You should not touch these, because the names + * of these variables may change. These are and will never be used + * with the currently supported options, so it is safe to leave these + * uninitialized. + */ + void *reserved_ptr1; + void *reserved_ptr2; + void *reserved_ptr3; + uint32_t reserved_int1; + uint32_t reserved_int2; + lzma_vli reserved_int3; + lzma_vli reserved_int4; + lzma_vli reserved_int5; + lzma_vli reserved_int6; + lzma_vli reserved_int7; + lzma_vli reserved_int8; + lzma_reserved_enum reserved_enum1; + lzma_reserved_enum reserved_enum2; + lzma_reserved_enum reserved_enum3; + lzma_reserved_enum reserved_enum4; + lzma_bool reserved_bool1; + lzma_bool reserved_bool2; + lzma_bool reserved_bool3; + lzma_bool reserved_bool4; + lzma_bool reserved_bool5; + lzma_bool reserved_bool6; + lzma_bool reserved_bool7; + lzma_bool reserved_bool8; + +} lzma_block; + + +/** + * \brief Decode the Block Header Size field + * + * To decode Block Header using lzma_block_header_decode(), the size of the + * Block Header has to be known and stored into lzma_block.header_size. + * The size can be calculated from the first byte of a Block using this macro. + * Note that if the first byte is 0x00, it indicates beginning of Index; use + * this macro only when the byte is not 0x00. + * + * There is no encoding macro, because Block Header encoder is enough for that. + */ +#define lzma_block_header_size_decode(b) (((uint32_t)(b) + 1) * 4) + + +/** + * \brief Calculate Block Header Size + * + * Calculate the minimum size needed for the Block Header field using the + * settings specified in the lzma_block structure. Note that it is OK to + * increase the calculated header_size value as long as it is a multiple of + * four and doesn't exceed LZMA_BLOCK_HEADER_SIZE_MAX. Increasing header_size + * just means that lzma_block_header_encode() will add Header Padding. + * + * \return - LZMA_OK: Size calculated successfully and stored to + * block->header_size. + * - LZMA_OPTIONS_ERROR: Unsupported version, filters or + * filter options. + * - LZMA_PROG_ERROR: Invalid values like compressed_size == 0. + * + * \note This doesn't check that all the options are valid i.e. this + * may return LZMA_OK even if lzma_block_header_encode() or + * lzma_block_encoder() would fail. If you want to validate the + * filter chain, consider using lzma_memlimit_encoder() which as + * a side-effect validates the filter chain. + */ +extern LZMA_API(lzma_ret) lzma_block_header_size(lzma_block *block) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Encode Block Header + * + * The caller must have calculated the size of the Block Header already with + * lzma_block_header_size(). If a value larger than the one calculated by + * lzma_block_header_size() is used, the Block Header will be padded to the + * specified size. + * + * \param out Beginning of the output buffer. This must be + * at least block->header_size bytes. + * \param block Block options to be encoded. + * + * \return - LZMA_OK: Encoding was successful. block->header_size + * bytes were written to output buffer. + * - LZMA_OPTIONS_ERROR: Invalid or unsupported options. + * - LZMA_PROG_ERROR: Invalid arguments, for example + * block->header_size is invalid or block->filters is NULL. + */ +extern LZMA_API(lzma_ret) lzma_block_header_encode( + const lzma_block *block, uint8_t *out) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Decode Block Header + * + * The size of the Block Header must have already been decoded with + * lzma_block_header_size_decode() macro and stored to block->header_size. + * block->filters must have been allocated, but not necessarily initialized. + * Possible existing filter options are _not_ freed. + * + * \param block Destination for block options with header_size + * properly initialized. + * \param allocator lzma_allocator for custom allocator functions. + * Set to NULL to use malloc() (and also free() + * if an error occurs). + * \param in Beginning of the input buffer. This must be + * at least block->header_size bytes. + * + * \return - LZMA_OK: Decoding was successful. block->header_size + * bytes were read from the input buffer. + * - LZMA_OPTIONS_ERROR: The Block Header specifies some + * unsupported options such as unsupported filters. + * - LZMA_DATA_ERROR: Block Header is corrupt, for example, + * the CRC32 doesn't match. + * - LZMA_PROG_ERROR: Invalid arguments, for example + * block->header_size is invalid or block->filters is NULL. + */ +extern LZMA_API(lzma_ret) lzma_block_header_decode(lzma_block *block, + lzma_allocator *allocator, const uint8_t *in) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Validate and set Compressed Size according to Unpadded Size + * + * Block Header stores Compressed Size, but Index has Unpadded Size. If the + * application has already parsed the Index and is now decoding Blocks, + * it can calculate Compressed Size from Unpadded Size. This function does + * exactly that with error checking: + * + * - Compressed Size calculated from Unpadded Size must be positive integer, + * that is, Unpadded Size must be big enough that after Block Header and + * Check fields there's still at least one byte for Compressed Size. + * + * - If Compressed Size was present in Block Header, the new value + * calculated from Unpadded Size is compared against the value + * from Block Header. + * + * \note This function must be called _after_ decoding the Block Header + * field so that it can properly validate Compressed Size if it + * was present in Block Header. + * + * \return - LZMA_OK: block->compressed_size was set successfully. + * - LZMA_DATA_ERROR: unpadded_size is too small compared to + * block->header_size and lzma_check_size(block->check). + * - LZMA_PROG_ERROR: Some values are invalid. For example, + * block->header_size must be a multiple of four and + * between 8 and 1024 inclusive. + */ +extern LZMA_API(lzma_ret) lzma_block_compressed_size( + lzma_block *block, lzma_vli unpadded_size) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Calculate Unpadded Size + * + * The Index field stores Unpadded Size and Uncompressed Size. The latter + * can be taken directly from the lzma_block structure after coding a Block, + * but Unpadded Size needs to be calculated from Block Header Size, + * Compressed Size, and size of the Check field. This is where this function + * is needed. + * + * \return Unpadded Size on success, or zero on error. + */ +extern LZMA_API(lzma_vli) lzma_block_unpadded_size(const lzma_block *block) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Calculate the total encoded size of a Block + * + * This is equivalent to lzma_block_unpadded_size() except that the returned + * value includes the size of the Block Padding field. + * + * \return On success, total encoded size of the Block. On error, + * zero is returned. + */ +extern LZMA_API(lzma_vli) lzma_block_total_size(const lzma_block *block) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Initialize .xz Block encoder + * + * Valid actions for lzma_code() are LZMA_RUN, LZMA_SYNC_FLUSH (only if the + * filter chain supports it), and LZMA_FINISH. + * + * \return - LZMA_OK: All good, continue with lzma_code(). + * - LZMA_MEM_ERROR + * - LZMA_OPTIONS_ERROR + * - LZMA_UNSUPPORTED_CHECK: block->check specfies a Check ID + * that is not supported by this buid of liblzma. Initializing + * the encoder failed. + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_block_encoder( + lzma_stream *strm, lzma_block *block) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Initialize .xz Block decoder + * + * Valid actions for lzma_code() are LZMA_RUN and LZMA_FINISH. Using + * LZMA_FINISH is not required. It is supported only for convenience. + * + * \return - LZMA_OK: All good, continue with lzma_code(). + * - LZMA_UNSUPPORTED_CHECK: Initialization was successful, but + * the given Check ID is not supported, thus Check will be + * ignored. + * - LZMA_PROG_ERROR + * - LZMA_MEM_ERROR + */ +extern LZMA_API(lzma_ret) lzma_block_decoder( + lzma_stream *strm, lzma_block *block) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Calculate maximum output size for single-call Block encoding + * + * This is equivalent to lzma_stream_buffer_bound() but for .xz Blocks. + * See the documentation of lzma_stream_buffer_bound(). + */ +extern LZMA_API(size_t) lzma_block_buffer_bound(size_t uncompressed_size) + lzma_nothrow; + + +/** + * \brief Single-call .xz Block encoder + * + * In contrast to the multi-call encoder initialized with + * lzma_block_encoder(), this function encodes also the Block Header. This + * is required to make it possible to write appropriate Block Header also + * in case the data isn't compressible, and different filter chain has to be + * used to encode the data in uncompressed form using uncompressed chunks + * of the LZMA2 filter. + * + * When the data isn't compressible, header_size, compressed_size, and + * uncompressed_size are set just like when the data was compressible, but + * it is possible that header_size is too small to hold the filter chain + * specified in block->filters, because that isn't necessarily the filter + * chain that was actually used to encode the data. lzma_block_unpadded_size() + * still works normally, because it doesn't read the filters array. + * + * \param block Block options: block->version, block->check, + * and block->filters must have been initialized. + * \param allocator lzma_allocator for custom allocator functions. + * Set to NULL to use malloc() and free(). + * \param in Beginning of the input buffer + * \param in_size Size of the input buffer + * \param out Beginning of the output buffer + * \param out_pos The next byte will be written to out[*out_pos]. + * *out_pos is updated only if encoding succeeds. + * \param out_size Size of the out buffer; the first byte into + * which no data is written to is out[out_size]. + * + * \return - LZMA_OK: Encoding was successful. + * - LZMA_BUF_ERROR: Not enough output buffer space. + * - LZMA_OPTIONS_ERROR + * - LZMA_MEM_ERROR + * - LZMA_DATA_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_block_buffer_encode( + lzma_block *block, lzma_allocator *allocator, + const uint8_t *in, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Single-call .xz Block decoder + * + * This is single-call equivalent of lzma_block_decoder(), and requires that + * the caller has already decoded Block Header and checked its memory usage. + * + * \param block Block options just like with lzma_block_decoder(). + * \param allocator lzma_allocator for custom allocator functions. + * Set to NULL to use malloc() and free(). + * \param in Beginning of the input buffer + * \param in_pos The next byte will be read from in[*in_pos]. + * *in_pos is updated only if decoding succeeds. + * \param in_size Size of the input buffer; the first byte that + * won't be read is in[in_size]. + * \param out Beginning of the output buffer + * \param out_pos The next byte will be written to out[*out_pos]. + * *out_pos is updated only if encoding succeeds. + * \param out_size Size of the out buffer; the first byte into + * which no data is written to is out[out_size]. + * + * \return - LZMA_OK: Decoding was successful. + * - LZMA_OPTIONS_ERROR + * - LZMA_DATA_ERROR + * - LZMA_MEM_ERROR + * - LZMA_BUF_ERROR: Output buffer was too small. + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_block_buffer_decode( + lzma_block *block, lzma_allocator *allocator, + const uint8_t *in, size_t *in_pos, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) + lzma_nothrow; diff --git a/headers/lzma/check.h b/headers/lzma/check.h new file mode 100644 index 0000000..5661bbe --- /dev/null +++ b/headers/lzma/check.h @@ -0,0 +1,150 @@ +/** + * \file lzma/check.h + * \brief Integrity checks + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/** + * \brief Type of the integrity check (Check ID) + * + * The .xz format supports multiple types of checks that are calculated + * from the uncompressed data. They vary in both speed and ability to + * detect errors. + */ +typedef enum { + LZMA_CHECK_NONE = 0, + /**< + * No Check is calculated. + * + * Size of the Check field: 0 bytes + */ + + LZMA_CHECK_CRC32 = 1, + /**< + * CRC32 using the polynomial from the IEEE 802.3 standard + * + * Size of the Check field: 4 bytes + */ + + LZMA_CHECK_CRC64 = 4, + /**< + * CRC64 using the polynomial from the ECMA-182 standard + * + * Size of the Check field: 8 bytes + */ + + LZMA_CHECK_SHA256 = 10 + /**< + * SHA-256 + * + * Size of the Check field: 32 bytes + */ +} lzma_check; + + +/** + * \brief Maximum valid Check ID + * + * The .xz file format specification specifies 16 Check IDs (0-15). Some + * of them are only reserved, that is, no actual Check algorithm has been + * assigned. When decoding, liblzma still accepts unknown Check IDs for + * future compatibility. If a valid but unsupported Check ID is detected, + * liblzma can indicate a warning; see the flags LZMA_TELL_NO_CHECK, + * LZMA_TELL_UNSUPPORTED_CHECK, and LZMA_TELL_ANY_CHECK in container.h. + */ +#define LZMA_CHECK_ID_MAX 15 + + +/** + * \brief Test if the given Check ID is supported + * + * Return true if the given Check ID is supported by this liblzma build. + * Otherwise false is returned. It is safe to call this with a value that + * is not in the range [0, 15]; in that case the return value is always false. + * + * You can assume that LZMA_CHECK_NONE and LZMA_CHECK_CRC32 are always + * supported (even if liblzma is built with limited features). + */ +extern LZMA_API(lzma_bool) lzma_check_is_supported(lzma_check check) + lzma_nothrow lzma_attr_const; + + +/** + * \brief Get the size of the Check field with the given Check ID + * + * Although not all Check IDs have a check algorithm associated, the size of + * every Check is already frozen. This function returns the size (in bytes) of + * the Check field with the specified Check ID. The values are: + * { 0, 4, 4, 4, 8, 8, 8, 16, 16, 16, 32, 32, 32, 64, 64, 64 } + * + * If the argument is not in the range [0, 15], UINT32_MAX is returned. + */ +extern LZMA_API(uint32_t) lzma_check_size(lzma_check check) + lzma_nothrow lzma_attr_const; + + +/** + * \brief Maximum size of a Check field + */ +#define LZMA_CHECK_SIZE_MAX 64 + + +/** + * \brief Calculate CRC32 + * + * Calculate CRC32 using the polynomial from the IEEE 802.3 standard. + * + * \param buf Pointer to the input buffer + * \param size Size of the input buffer + * \param crc Previously returned CRC value. This is used to + * calculate the CRC of a big buffer in smaller chunks. + * Set to zero when starting a new calculation. + * + * \return Updated CRC value, which can be passed to this function + * again to continue CRC calculation. + */ +extern LZMA_API(uint32_t) lzma_crc32( + const uint8_t *buf, size_t size, uint32_t crc) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Calculate CRC64 + * + * Calculate CRC64 using the polynomial from the ECMA-182 standard. + * + * This function is used similarly to lzma_crc32(). See its documentation. + */ +extern LZMA_API(uint64_t) lzma_crc64( + const uint8_t *buf, size_t size, uint64_t crc) + lzma_nothrow lzma_attr_pure; + + +/* + * SHA-256 functions are currently not exported to public API. + * Contact Lasse Collin if you think it should be. + */ + + +/** + * \brief Get the type of the integrity check + * + * This function can be called only immediatelly after lzma_code() has + * returned LZMA_NO_CHECK, LZMA_UNSUPPORTED_CHECK, or LZMA_GET_CHECK. + * Calling this function in any other situation has undefined behavior. + */ +extern LZMA_API(lzma_check) lzma_get_check(const lzma_stream *strm) + lzma_nothrow; diff --git a/headers/lzma/container.h b/headers/lzma/container.h new file mode 100644 index 0000000..0d90765 --- /dev/null +++ b/headers/lzma/container.h @@ -0,0 +1,404 @@ +/** + * \file lzma/container.h + * \brief File formats + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/************ + * Encoding * + ************/ + +/** + * \brief Default compression preset + * + * It's not straightforward to recommend a default preset, because in some + * cases keeping the resource usage relatively low is more important that + * getting the maximum compression ratio. + */ +#define LZMA_PRESET_DEFAULT UINT32_C(6) + + +/** + * \brief Mask for preset level + * + * This is useful only if you need to extract the level from the preset + * variable. That should be rare. + */ +#define LZMA_PRESET_LEVEL_MASK UINT32_C(0x1F) + + +/* + * Preset flags + * + * Currently only one flag is defined. + */ + +/** + * \brief Extreme compression preset + * + * This flag modifies the preset to make the encoding significantly slower + * while improving the compression ratio only marginally. This is useful + * when you don't mind wasting time to get as small result as possible. + * + * This flag doesn't affect the memory usage requirements of the decoder (at + * least not significantly). The memory usage of the encoder may be increased + * a little but only at the lowest preset levels (0-2). + */ +#define LZMA_PRESET_EXTREME (UINT32_C(1) << 31) + + +/** + * \brief Calculate rough memory usage of easy encoder + * + * This function is a wrapper for lzma_raw_encoder_memusage(). + * + * \param preset Compression preset (level and possible flags) + */ +extern LZMA_API(uint64_t) lzma_easy_encoder_memusage(uint32_t preset) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Calculate rough decoder memory usage of a preset + * + * This function is a wrapper for lzma_raw_decoder_memusage(). + * + * \param preset Compression preset (level and possible flags) + */ +extern LZMA_API(uint64_t) lzma_easy_decoder_memusage(uint32_t preset) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Initialize .xz Stream encoder using a preset number + * + * This function is intended for those who just want to use the basic features + * if liblzma (that is, most developers out there). + * + * \param strm Pointer to lzma_stream that is at least initialized + * with LZMA_STREAM_INIT. + * \param preset Compression preset to use. A preset consist of level + * number and zero or more flags. Usually flags aren't + * used, so preset is simply a number [0, 9] which match + * the options -0 .. -9 of the xz command line tool. + * Additional flags can be be set using bitwise-or with + * the preset level number, e.g. 6 | LZMA_PRESET_EXTREME. + * \param check Integrity check type to use. See check.h for available + * checks. If you are unsure, use LZMA_CHECK_CRC32. + * + * \return - LZMA_OK: Initialization succeeded. Use lzma_code() to + * encode your data. + * - LZMA_MEM_ERROR: Memory allocation failed. + * - LZMA_OPTIONS_ERROR: The given compression level is not + * supported by this build of liblzma. + * - LZMA_UNSUPPORTED_CHECK: The given check type is not + * supported by this liblzma build. + * - LZMA_PROG_ERROR: One or more of the parameters have values + * that will never be valid. For example, strm == NULL. + * + * If initialization fails (return value is not LZMA_OK), all the memory + * allocated for *strm by liblzma is always freed. Thus, there is no need + * to call lzma_end() after failed initialization. + * + * If initialization succeeds, use lzma_code() to do the actual encoding. + * Valid values for `action' (the second argument of lzma_code()) are + * LZMA_RUN, LZMA_SYNC_FLUSH, LZMA_FULL_FLUSH, and LZMA_FINISH. In future, + * there may be compression levels or flags that don't support LZMA_SYNC_FLUSH. + */ +extern LZMA_API(lzma_ret) lzma_easy_encoder( + lzma_stream *strm, uint32_t preset, lzma_check check) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Single-call .xz Stream encoding using a preset number + * + * The maximum required output buffer size can be calculated with + * lzma_stream_buffer_bound(). + * + * \param preset Compression preset to use. See the description + * in lzma_easy_encoder(). + * \param check Type of the integrity check to calculate from + * uncompressed data. + * \param allocator lzma_allocator for custom allocator functions. + * Set to NULL to use malloc() and free(). + * \param in Beginning of the input buffer + * \param in_size Size of the input buffer + * \param out Beginning of the output buffer + * \param out_pos The next byte will be written to out[*out_pos]. + * *out_pos is updated only if encoding succeeds. + * \param out_size Size of the out buffer; the first byte into + * which no data is written to is out[out_size]. + * + * \return - LZMA_OK: Encoding was successful. + * - LZMA_BUF_ERROR: Not enough output buffer space. + * - LZMA_OPTIONS_ERROR + * - LZMA_MEM_ERROR + * - LZMA_DATA_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_easy_buffer_encode( + uint32_t preset, lzma_check check, + lzma_allocator *allocator, const uint8_t *in, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) lzma_nothrow; + + +/** + * \brief Initialize .xz Stream encoder using a custom filter chain + * + * \param strm Pointer to properly prepared lzma_stream + * \param filters Array of filters. This must be terminated with + * filters[n].id = LZMA_VLI_UNKNOWN. See filter.h for + * more information. + * \param check Type of the integrity check to calculate from + * uncompressed data. + * + * \return - LZMA_OK: Initialization was successful. + * - LZMA_MEM_ERROR + * - LZMA_OPTIONS_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_stream_encoder(lzma_stream *strm, + const lzma_filter *filters, lzma_check check) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Initialize .lzma encoder (legacy file format) + * + * The .lzma format is sometimes called the LZMA_Alone format, which is the + * reason for the name of this function. The .lzma format supports only the + * LZMA1 filter. There is no support for integrity checks like CRC32. + * + * Use this function if and only if you need to create files readable by + * legacy LZMA tools such as LZMA Utils 4.32.x. Moving to the .xz format + * is strongly recommended. + * + * The valid action values for lzma_code() are LZMA_RUN and LZMA_FINISH. + * No kind of flushing is supported, because the file format doesn't make + * it possible. + * + * \return - LZMA_OK + * - LZMA_MEM_ERROR + * - LZMA_OPTIONS_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_alone_encoder( + lzma_stream *strm, const lzma_options_lzma *options) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Calculate output buffer size for single-call Stream encoder + * + * When trying to compress uncompressible data, the encoded size will be + * slightly bigger than the input data. This function calculates how much + * output buffer space is required to be sure that lzma_stream_buffer_encode() + * doesn't return LZMA_BUF_ERROR. + * + * The calculated value is not exact, but it is guaranteed to be big enough. + * The actual maximum output space required may be slightly smaller (up to + * about 100 bytes). This should not be a problem in practice. + * + * If the calculated maximum size doesn't fit into size_t or would make the + * Stream grow past LZMA_VLI_MAX (which should never happen in practice), + * zero is returned to indicate the error. + * + * \note The limit calculated by this function applies only to + * single-call encoding. Multi-call encoding may (and probably + * will) have larger maximum expansion when encoding + * uncompressible data. Currently there is no function to + * calculate the maximum expansion of multi-call encoding. + */ +extern LZMA_API(size_t) lzma_stream_buffer_bound(size_t uncompressed_size) + lzma_nothrow; + + +/** + * \brief Single-call .xz Stream encoder + * + * \param filters Array of filters. This must be terminated with + * filters[n].id = LZMA_VLI_UNKNOWN. See filter.h + * for more information. + * \param check Type of the integrity check to calculate from + * uncompressed data. + * \param allocator lzma_allocator for custom allocator functions. + * Set to NULL to use malloc() and free(). + * \param in Beginning of the input buffer + * \param in_size Size of the input buffer + * \param out Beginning of the output buffer + * \param out_pos The next byte will be written to out[*out_pos]. + * *out_pos is updated only if encoding succeeds. + * \param out_size Size of the out buffer; the first byte into + * which no data is written to is out[out_size]. + * + * \return - LZMA_OK: Encoding was successful. + * - LZMA_BUF_ERROR: Not enough output buffer space. + * - LZMA_OPTIONS_ERROR + * - LZMA_MEM_ERROR + * - LZMA_DATA_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_stream_buffer_encode( + lzma_filter *filters, lzma_check check, + lzma_allocator *allocator, const uint8_t *in, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) + lzma_nothrow lzma_attr_warn_unused_result; + + +/************ + * Decoding * + ************/ + +/** + * This flag makes lzma_code() return LZMA_NO_CHECK if the input stream + * being decoded has no integrity check. Note that when used with + * lzma_auto_decoder(), all .lzma files will trigger LZMA_NO_CHECK + * if LZMA_TELL_NO_CHECK is used. + */ +#define LZMA_TELL_NO_CHECK UINT32_C(0x01) + + +/** + * This flag makes lzma_code() return LZMA_UNSUPPORTED_CHECK if the input + * stream has an integrity check, but the type of the integrity check is not + * supported by this liblzma version or build. Such files can still be + * decoded, but the integrity check cannot be verified. + */ +#define LZMA_TELL_UNSUPPORTED_CHECK UINT32_C(0x02) + + +/** + * This flag makes lzma_code() return LZMA_GET_CHECK as soon as the type + * of the integrity check is known. The type can then be got with + * lzma_get_check(). + */ +#define LZMA_TELL_ANY_CHECK UINT32_C(0x04) + + +/** + * This flag enables decoding of concatenated files with file formats that + * allow concatenating compressed files as is. From the formats currently + * supported by liblzma, only the .xz format allows concatenated files. + * Concatenated files are not allowed with the legacy .lzma format. + * + * This flag also affects the usage of the `action' argument for lzma_code(). + * When LZMA_CONCATENATED is used, lzma_code() won't return LZMA_STREAM_END + * unless LZMA_FINISH is used as `action'. Thus, the application has to set + * LZMA_FINISH in the same way as it does when encoding. + * + * If LZMA_CONCATENATED is not used, the decoders still accept LZMA_FINISH + * as `action' for lzma_code(), but the usage of LZMA_FINISH isn't required. + */ +#define LZMA_CONCATENATED UINT32_C(0x08) + + +/** + * \brief Initialize .xz Stream decoder + * + * \param strm Pointer to properly prepared lzma_stream + * \param memlimit Rough memory usage limit as bytes + * \param flags Bitwise-or of zero or more of the decoder flags: + * LZMA_TELL_NO_CHECK, LZMA_TELL_UNSUPPORTED_CHECK, + * LZMA_TELL_ANY_CHECK, LZMA_CONCATENATED + * + * \return - LZMA_OK: Initialization was successful. + * - LZMA_MEM_ERROR: Cannot allocate memory. + * - LZMA_OPTIONS_ERROR: Unsupported flags + */ +extern LZMA_API(lzma_ret) lzma_stream_decoder( + lzma_stream *strm, uint64_t memlimit, uint32_t flags) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Decode .xz Streams and .lzma files with autodetection + * + * This decoder autodetects between the .xz and .lzma file formats, and + * calls lzma_stream_decoder() or lzma_alone_decoder() once the type + * of the input file has been detected. + * + * \param strm Pointer to properly prepared lzma_stream + * \param memlimit Rough memory usage limit as bytes + * \param flags Bitwise-or of flags, or zero for no flags. + * + * \return - LZMA_OK: Initialization was successful. + * - LZMA_MEM_ERROR: Cannot allocate memory. + * - LZMA_OPTIONS_ERROR: Unsupported flags + */ +extern LZMA_API(lzma_ret) lzma_auto_decoder( + lzma_stream *strm, uint64_t memlimit, uint32_t flags) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Initialize .lzma decoder (legacy file format) + * + * Valid `action' arguments to lzma_code() are LZMA_RUN and LZMA_FINISH. + * There is no need to use LZMA_FINISH, but allowing it may simplify + * certain types of applications. + * + * \return - LZMA_OK + * - LZMA_MEM_ERROR + */ +extern LZMA_API(lzma_ret) lzma_alone_decoder( + lzma_stream *strm, uint64_t memlimit) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Single-call .xz Stream decoder + * + * \param memlimit Pointer to how much memory the decoder is allowed + * to allocate. The value pointed by this pointer is + * modified if and only if LZMA_MEMLIMIT_ERROR is + * returned. + * \param flags Bitwise-or of zero or more of the decoder flags: + * LZMA_TELL_NO_CHECK, LZMA_TELL_UNSUPPORTED_CHECK, + * LZMA_CONCATENATED. Note that LZMA_TELL_ANY_CHECK + * is not allowed and will return LZMA_PROG_ERROR. + * \param allocator lzma_allocator for custom allocator functions. + * Set to NULL to use malloc() and free(). + * \param in Beginning of the input buffer + * \param in_pos The next byte will be read from in[*in_pos]. + * *in_pos is updated only if decoding succeeds. + * \param in_size Size of the input buffer; the first byte that + * won't be read is in[in_size]. + * \param out Beginning of the output buffer + * \param out_pos The next byte will be written to out[*out_pos]. + * *out_pos is updated only if encoding succeeds. + * \param out_size Size of the out buffer; the first byte into + * which no data is written to is out[out_size]. + * + * \return - LZMA_OK: Decoding was successful. + * - LZMA_FORMAT_ERROR + * - LZMA_OPTIONS_ERROR + * - LZMA_DATA_ERROR + * - LZMA_NO_CHECK: This can be returned only if using + * the LZMA_TELL_NO_CHECK flag. + * - LZMA_UNSUPPORTED_CHECK: This can be returned only if using + * the LZMA_TELL_UNSUPPORTED_CHECK flag. + * - LZMA_MEM_ERROR + * - LZMA_MEMLIMIT_ERROR: Memory usage limit was reached. + * The minimum required memlimit value was stored to *memlimit. + * - LZMA_BUF_ERROR: Output buffer was too small. + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_stream_buffer_decode( + uint64_t *memlimit, uint32_t flags, lzma_allocator *allocator, + const uint8_t *in, size_t *in_pos, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) + lzma_nothrow lzma_attr_warn_unused_result; diff --git a/headers/lzma/delta.h b/headers/lzma/delta.h new file mode 100644 index 0000000..592fc4f --- /dev/null +++ b/headers/lzma/delta.h @@ -0,0 +1,77 @@ +/** + * \file lzma/delta.h + * \brief Delta filter + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/** + * \brief Filter ID + * + * Filter ID of the Delta filter. This is used as lzma_filter.id. + */ +#define LZMA_FILTER_DELTA LZMA_VLI_C(0x03) + + +/** + * \brief Type of the delta calculation + * + * Currently only byte-wise delta is supported. Other possible types could + * be, for example, delta of 16/32/64-bit little/big endian integers, but + * these are not currently planned since byte-wise delta is almost as good. + */ +typedef enum { + LZMA_DELTA_TYPE_BYTE +} lzma_delta_type; + + +/** + * \brief Options for the Delta filter + * + * These options are needed by both encoder and decoder. + */ +typedef struct { + /** For now, this must always be LZMA_DELTA_TYPE_BYTE. */ + lzma_delta_type type; + + /** + * \brief Delta distance + * + * With the only currently supported type, LZMA_DELTA_TYPE_BYTE, + * the distance is as bytes. + * + * Examples: + * - 16-bit stereo audio: distance = 4 bytes + * - 24-bit RGB image data: distance = 3 bytes + */ + uint32_t dist; +# define LZMA_DELTA_DIST_MIN 1 +# define LZMA_DELTA_DIST_MAX 256 + + /* + * Reserved space to allow possible future extensions without + * breaking the ABI. You should not touch these, because the names + * of these variables may change. These are and will never be used + * when type is LZMA_DELTA_TYPE_BYTE, so it is safe to leave these + * uninitialized. + */ + uint32_t reserved_int1; + uint32_t reserved_int2; + uint32_t reserved_int3; + uint32_t reserved_int4; + void *reserved_ptr1; + void *reserved_ptr2; + +} lzma_options_delta; diff --git a/headers/lzma/filter.h b/headers/lzma/filter.h new file mode 100644 index 0000000..8d0db96 --- /dev/null +++ b/headers/lzma/filter.h @@ -0,0 +1,360 @@ +/** + * \file lzma/filter.h + * \brief Common filter related types + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/** + * \brief Maximum number of filters in a chain + * + * A filter chain can have 1-4 filters, of which three are allowed to change + * the size of the data. Usually only one or two filters are needed. + */ +#define LZMA_FILTERS_MAX 4 + + +/** + * \brief Filter options + * + * This structure is used to pass Filter ID and a pointer filter's + * options to liblzma. A few functions work with a single lzma_filter + * structure, while most functions expect a filter chain. + * + * A filter chain is indicated with an array of lzma_filter structures. + * The array is terminated with .id = LZMA_VLI_UNKNOWN. Thus, the filter + * array must have LZMA_FILTERS_MAX + 1 elements (that is, five) to + * be able to hold any arbitrary filter chain. This is important when + * using lzma_block_header_decode() from block.h, because too small + * array would make liblzma write past the end of the filters array. + */ +typedef struct { + /** + * \brief Filter ID + * + * Use constants whose name begin with `LZMA_FILTER_' to specify + * different filters. In an array of lzma_filter structures, use + * LZMA_VLI_UNKNOWN to indicate end of filters. + * + * \note This is not an enum, because on some systems enums + * cannot be 64-bit. + */ + lzma_vli id; + + /** + * \brief Pointer to filter-specific options structure + * + * If the filter doesn't need options, set this to NULL. If id is + * set to LZMA_VLI_UNKNOWN, options is ignored, and thus + * doesn't need be initialized. + * + * Some filters support changing the options in the middle of + * the encoding process. These filters store the pointer of the + * options structure and communicate with the application via + * modifications of the options structure. + */ + void *options; + +} lzma_filter; + + +/** + * \brief Test if the given Filter ID is supported for encoding + * + * Return true if the give Filter ID is supported for encoding by this + * liblzma build. Otherwise false is returned. + * + * There is no way to list which filters are available in this particular + * liblzma version and build. It would be useless, because the application + * couldn't know what kind of options the filter would need. + */ +extern LZMA_API(lzma_bool) lzma_filter_encoder_is_supported(lzma_vli id) + lzma_nothrow lzma_attr_const; + + +/** + * \brief Test if the given Filter ID is supported for decoding + * + * Return true if the give Filter ID is supported for decoding by this + * liblzma build. Otherwise false is returned. + */ +extern LZMA_API(lzma_bool) lzma_filter_decoder_is_supported(lzma_vli id) + lzma_nothrow lzma_attr_const; + + +/** + * \brief Calculate rough memory requirements for raw encoder + * + * Because the calculation is rough, this function can be used to calculate + * the memory requirements for Block and Stream encoders too. + * + * \param filters Array of filters terminated with + * .id == LZMA_VLI_UNKNOWN. + * + * \return Rough number of bytes of memory required for the given + * filter chain when encoding. + */ +extern LZMA_API(uint64_t) lzma_raw_encoder_memusage(const lzma_filter *filters) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Calculate rough memory requirements for raw decoder + * + * Because the calculation is rough, this function can be used to calculate + * the memory requirements for Block and Stream decoders too. + * + * \param filters Array of filters terminated with + * .id == LZMA_VLI_UNKNOWN. + * + * \return Rough number of bytes of memory required for the given + * filter chain when decoding. + */ +extern LZMA_API(uint64_t) lzma_raw_decoder_memusage(const lzma_filter *filters) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Initialize raw encoder + * + * This function may be useful when implementing custom file formats. + * + * \param strm Pointer to properly prepared lzma_stream + * \param filters Array of lzma_filter structures. The end of the + * array must be marked with .id = LZMA_VLI_UNKNOWN. + * + * The `action' with lzma_code() can be LZMA_RUN, LZMA_SYNC_FLUSH (if the + * filter chain supports it), or LZMA_FINISH. + * + * \return - LZMA_OK + * - LZMA_MEM_ERROR + * - LZMA_OPTIONS_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_raw_encoder( + lzma_stream *strm, const lzma_filter *filters) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Initialize raw decoder + * + * The initialization of raw decoder goes similarly to raw encoder. + * + * The `action' with lzma_code() can be LZMA_RUN or LZMA_FINISH. Using + * LZMA_FINISH is not required, it is supported just for convenience. + * + * \return - LZMA_OK + * - LZMA_MEM_ERROR + * - LZMA_OPTIONS_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_raw_decoder( + lzma_stream *strm, const lzma_filter *filters) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Single-call raw encoder + * + * \param filters Array of lzma_filter structures. The end of the + * array must be marked with .id = LZMA_VLI_UNKNOWN. + * \param allocator lzma_allocator for custom allocator functions. + * Set to NULL to use malloc() and free(). + * \param in Beginning of the input buffer + * \param in_size Size of the input buffer + * \param out Beginning of the output buffer + * \param out_pos The next byte will be written to out[*out_pos]. + * *out_pos is updated only if encoding succeeds. + * \param out_size Size of the out buffer; the first byte into + * which no data is written to is out[out_size]. + * + * \return - LZMA_OK: Encoding was successful. + * - LZMA_BUF_ERROR: Not enough output buffer space. + * - LZMA_OPTIONS_ERROR + * - LZMA_MEM_ERROR + * - LZMA_DATA_ERROR + * - LZMA_PROG_ERROR + * + * \note There is no function to calculate how big output buffer + * would surely be big enough. (lzma_stream_buffer_bound() + * works only for lzma_stream_buffer_encode().) + */ +extern LZMA_API(lzma_ret) lzma_raw_buffer_encode( + const lzma_filter *filters, lzma_allocator *allocator, + const uint8_t *in, size_t in_size, uint8_t *out, + size_t *out_pos, size_t out_size) lzma_nothrow; + + +/** + * \brief Single-call raw decoder + * + * \param filters Array of lzma_filter structures. The end of the + * array must be marked with .id = LZMA_VLI_UNKNOWN. + * \param allocator lzma_allocator for custom allocator functions. + * Set to NULL to use malloc() and free(). + * \param in Beginning of the input buffer + * \param in_pos The next byte will be read from in[*in_pos]. + * *in_pos is updated only if decoding succeeds. + * \param in_size Size of the input buffer; the first byte that + * won't be read is in[in_size]. + * \param out Beginning of the output buffer + * \param out_pos The next byte will be written to out[*out_pos]. + * *out_pos is updated only if encoding succeeds. + * \param out_size Size of the out buffer; the first byte into + * which no data is written to is out[out_size]. + */ +extern LZMA_API(lzma_ret) lzma_raw_buffer_decode( + const lzma_filter *filters, lzma_allocator *allocator, + const uint8_t *in, size_t *in_pos, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) lzma_nothrow; + + +/** + * \brief Get the size of the Filter Properties field + * + * This function may be useful when implementing custom file formats + * using the raw encoder and decoder. + * + * \param size Pointer to uint32_t to hold the size of the properties + * \param filter Filter ID and options (the size of the propeties may + * vary depending on the options) + * + * \return - LZMA_OK + * - LZMA_OPTIONS_ERROR + * - LZMA_PROG_ERROR + * + * \note This function validates the Filter ID, but does not + * necessarily validate the options. Thus, it is possible + * that this returns LZMA_OK while the following call to + * lzma_properties_encode() returns LZMA_OPTIONS_ERROR. + */ +extern LZMA_API(lzma_ret) lzma_properties_size( + uint32_t *size, const lzma_filter *filter) lzma_nothrow; + + +/** + * \brief Encode the Filter Properties field + * + * \param filter Filter ID and options + * \param props Buffer to hold the encoded options. The size of + * buffer must have been already determined with + * lzma_properties_size(). + * + * \return - LZMA_OK + * - LZMA_OPTIONS_ERROR + * - LZMA_PROG_ERROR + * + * \note Even this function won't validate more options than actually + * necessary. Thus, it is possible that encoding the properties + * succeeds but using the same options to initialize the encoder + * will fail. + * + * \note It is OK to skip calling this function if + * lzma_properties_size() indicated that the size + * of the Filter Properties field is zero. + */ +extern LZMA_API(lzma_ret) lzma_properties_encode( + const lzma_filter *filter, uint8_t *props) lzma_nothrow; + + +/** + * \brief Decode the Filter Properties field + * + * \param filter filter->id must have been set to the correct + * Filter ID. filter->options doesn't need to be + * initialized (it's not freed by this function). The + * decoded options will be stored to filter->options. + * filter->options is set to NULL if there are no + * properties or if an error occurs. + * \param allocator Custom memory allocator used to allocate the + * options. Set to NULL to use the default malloc(), + * and in case of an error, also free(). + * \param props Input buffer containing the properties. + * \param props_size Size of the properties. This must be the exact + * size; giving too much or too little input will + * return LZMA_OPTIONS_ERROR. + * + * \return - LZMA_OK + * - LZMA_OPTIONS_ERROR + * - LZMA_MEM_ERROR + */ +extern LZMA_API(lzma_ret) lzma_properties_decode( + lzma_filter *filter, lzma_allocator *allocator, + const uint8_t *props, size_t props_size) lzma_nothrow; + + +/** + * \brief Calculate encoded size of a Filter Flags field + * + * Knowing the size of Filter Flags is useful to know when allocating + * memory to hold the encoded Filter Flags. + * + * \param size Pointer to integer to hold the calculated size + * \param filters Filter ID and associated options whose encoded + * size is to be calculted + * + * \return - LZMA_OK: *size set successfully. Note that this doesn't + * guarantee that filters->options is valid, thus + * lzma_filter_flags_encode() may still fail. + * - LZMA_OPTIONS_ERROR: Unknown Filter ID or unsupported options. + * - LZMA_PROG_ERROR: Invalid options + * + * \note If you need to calculate size of List of Filter Flags, + * you need to loop over every lzma_filter entry. + */ +extern LZMA_API(lzma_ret) lzma_filter_flags_size( + uint32_t *size, const lzma_filter *filters) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Encode Filter Flags into given buffer + * + * In contrast to some functions, this doesn't allocate the needed buffer. + * This is due to how this function is used internally by liblzma. + * + * \param filters Filter ID and options to be encoded + * \param out Beginning of the output buffer + * \param out_pos out[*out_pos] is the next write position. This + * is updated by the encoder. + * \param out_size out[out_size] is the first byte to not write. + * + * \return - LZMA_OK: Encoding was successful. + * - LZMA_OPTIONS_ERROR: Invalid or unsupported options. + * - LZMA_PROG_ERROR: Invalid options or not enough output + * buffer space (you should have checked it with + * lzma_filter_flags_size()). + */ +extern LZMA_API(lzma_ret) lzma_filter_flags_encode(const lzma_filter *filters, + uint8_t *out, size_t *out_pos, size_t out_size) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Decode Filter Flags from given buffer + * + * The decoded result is stored into *filters. filters->options is + * initialized but the old value is NOT free()d. + * + * \return - LZMA_OK + * - LZMA_OPTIONS_ERROR + * - LZMA_MEM_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_filter_flags_decode( + lzma_filter *filters, lzma_allocator *allocator, + const uint8_t *in, size_t *in_pos, size_t in_size) + lzma_nothrow lzma_attr_warn_unused_result; diff --git a/headers/lzma/index.h b/headers/lzma/index.h new file mode 100644 index 0000000..da9a622 --- /dev/null +++ b/headers/lzma/index.h @@ -0,0 +1,403 @@ +/** + * \file lzma/index.h + * \brief Handling of .xz Index lists + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/** + * \brief Opaque data type to hold the Index + */ +typedef struct lzma_index_s lzma_index; + + +/** + * \brief Index Record and its location + */ +typedef struct { + /** + * \brief Total encoded size of a Block including Block Padding + * + * This value is useful if you need to know the actual size of the + * Block that the Block decoder will read. + */ + lzma_vli total_size; + + /** + * \brief Encoded size of a Block excluding Block Padding + * + * This value is stored in the Index. When doing random-access + * reading, you should give this value to the Block decoder along + * with uncompressed_size. + */ + lzma_vli unpadded_size; + + /** + * \brief Uncompressed Size of a Block + */ + lzma_vli uncompressed_size; + + /** + * \brief Compressed offset in the Stream(s) + * + * This is the offset of the first byte of the Block, that is, + * where you need to seek to decode the Block. The offset + * is relative to the beginning of the Stream, or if there are + * multiple Indexes combined, relative to the beginning of the + * first Stream. + */ + lzma_vli stream_offset; + + /** + * \brief Uncompressed offset + * + * When doing random-access reading, it is possible that the target + * offset is not exactly at Block boundary. One will need to compare + * the target offset against uncompressed_offset, and possibly decode + * and throw away some amount of data before reaching the target + * offset. + */ + lzma_vli uncompressed_offset; + +} lzma_index_record; + + +/** + * \brief Calculate memory usage for Index with given number of Records + * + * On disk, the size of the Index field depends on both the number of Records + * stored and how big values the Records store (due to variable-length integer + * encoding). When the Index is kept in lzma_index structure, the memory usage + * depends only on the number of Records stored in the Index. The size in RAM + * is almost always a lot bigger than in encoded form on disk. + * + * This function calculates an approximate amount of memory needed hold the + * given number of Records in lzma_index structure. This value may vary + * between liblzma versions if the internal implementation is modified. + * + * If you want to know how much memory an existing lzma_index structure is + * using, use lzma_index_memusage(lzma_index_count(i)). + */ +extern LZMA_API(uint64_t) lzma_index_memusage(lzma_vli record_count) + lzma_nothrow; + + +/** + * \brief Allocate and initialize a new lzma_index structure + * + * If i is NULL, a new lzma_index structure is allocated, initialized, + * and a pointer to it returned. If allocation fails, NULL is returned. + * + * If i is non-NULL, it is reinitialized and the same pointer returned. + * In this case, return value cannot be NULL or a different pointer than + * the i that was given as an argument. + */ +extern LZMA_API(lzma_index *) lzma_index_init( + lzma_index *i, lzma_allocator *allocator) lzma_nothrow; + + +/** + * \brief Deallocate the Index + * + * If i is NULL, this does nothing. + */ +extern LZMA_API(void) lzma_index_end(lzma_index *i, lzma_allocator *allocator) + lzma_nothrow; + + +/** + * \brief Add a new Record to an Index + * + * \param i Pointer to a lzma_index structure + * \param allocator Pointer to lzma_allocator, or NULL to + * use malloc() + * \param unpadded_size Unpadded Size of a Block. This can be + * calculated with lzma_block_unpadded_size() + * after encoding or decoding the Block. + * \param uncompressed_size Uncompressed Size of a Block. This can be + * taken directly from lzma_block structure + * after encoding or decoding the Block. + * + * Appending a new Record does not affect the read position. + * + * \return - LZMA_OK + * - LZMA_MEM_ERROR + * - LZMA_DATA_ERROR: Compressed or uncompressed size of the + * Stream or size of the Index field would grow too big. + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_index_append( + lzma_index *i, lzma_allocator *allocator, + lzma_vli unpadded_size, lzma_vli uncompressed_size) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Get the number of Records + */ +extern LZMA_API(lzma_vli) lzma_index_count(const lzma_index *i) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Get the size of the Index field as bytes + * + * This is needed to verify the Backward Size field in the Stream Footer. + */ +extern LZMA_API(lzma_vli) lzma_index_size(const lzma_index *i) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Get the total size of the Blocks + * + * This doesn't include the Stream Header, Stream Footer, Stream Padding, + * or Index fields. + */ +extern LZMA_API(lzma_vli) lzma_index_total_size(const lzma_index *i) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Get the total size of the Stream + * + * If multiple Indexes have been combined, this works as if the Blocks + * were in a single Stream. + */ +extern LZMA_API(lzma_vli) lzma_index_stream_size(const lzma_index *i) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Get the total size of the file + * + * When no Indexes have been combined with lzma_index_cat(), this function is + * identical to lzma_index_stream_size(). If multiple Indexes have been + * combined, this includes also the headers of each separate Stream and the + * possible Stream Padding fields. + */ +extern LZMA_API(lzma_vli) lzma_index_file_size(const lzma_index *i) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Get the uncompressed size of the Stream + */ +extern LZMA_API(lzma_vli) lzma_index_uncompressed_size(const lzma_index *i) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Get the next Record from the Index + */ +extern LZMA_API(lzma_bool) lzma_index_read( + lzma_index *i, lzma_index_record *record) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Rewind the Index + * + * Rewind the Index so that next call to lzma_index_read() will return the + * first Record. + */ +extern LZMA_API(void) lzma_index_rewind(lzma_index *i) lzma_nothrow; + + +/** + * \brief Locate a Record + * + * When the Index is available, it is possible to do random-access reading + * with granularity of Block size. + * + * \param i Pointer to lzma_index structure + * \param record Pointer to a structure to hold the search results + * \param target Uncompressed target offset which the caller would + * like to locate from the Stream + * + * If the target is smaller than the uncompressed size of the Stream (can be + * checked with lzma_index_uncompressed_size()): + * - Information about the Record containing the requested uncompressed + * offset is stored into *record. + * - Read offset will be adjusted so that calling lzma_index_read() can be + * used to read subsequent Records. + * - This function returns false. + * + * If target is greater than the uncompressed size of the Stream, *record + * and the read position are not modified, and this function returns true. + */ +extern LZMA_API(lzma_bool) lzma_index_locate( + lzma_index *i, lzma_index_record *record, lzma_vli target) + lzma_nothrow; + + +/** + * \brief Concatenate Indexes of two Streams + * + * Concatenating Indexes is useful when doing random-access reading in + * multi-Stream .xz file, or when combining multiple Streams into single + * Stream. + * + * \param dest Destination Index after which src is appended + * \param src Source Index. If this function succeeds, the + * memory allocated for src is freed or moved to + * be part of dest. + * \param allocator Custom memory allocator; can be NULL to use + * malloc() and free(). + * \param padding Size of the Stream Padding field between Streams. + * This must be a multiple of four. + * + * \return - LZMA_OK: Indexes concatenated successfully. src is now + * a dangling pointer. + * - LZMA_DATA_ERROR: *dest would grow too big. + * - LZMA_MEM_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_index_cat(lzma_index *lzma_restrict dest, + lzma_index *lzma_restrict src, + lzma_allocator *allocator, lzma_vli padding) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Duplicate an Index list + * + * Makes an identical copy of the Index. Also the read position is copied. + * + * \return A copy of the Index, or NULL if memory allocation failed. + */ +extern LZMA_API(lzma_index *) lzma_index_dup( + const lzma_index *i, lzma_allocator *allocator) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Compare if two Index lists are identical + * + * Read positions are not compared. + * + * \return True if *a and *b are equal, false otherwise. + */ +extern LZMA_API(lzma_bool) lzma_index_equal( + const lzma_index *a, const lzma_index *b) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Initialize .xz Index encoder + * + * \param strm Pointer to properly prepared lzma_stream + * \param i Pointer to lzma_index which should be encoded. + * The read position will be at the end of the Index + * after lzma_code() has returned LZMA_STREAM_END. + * + * The only valid action value for lzma_code() is LZMA_RUN. + * + * \return - LZMA_OK: Initialization succeeded, continue with lzma_code(). + * - LZMA_MEM_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_index_encoder(lzma_stream *strm, lzma_index *i) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Initialize .xz Index decoder + * + * \param strm Pointer to properly prepared lzma_stream + * \param i Pointer to a pointer that will be made to point + * to the final decoded Index once lzma_code() has + * returned LZMA_STREAM_END. That is, + * lzma_index_decoder() always takes care of + * allocating a new lzma_index structure, and *i + * doesn't need to be initialized by the caller. + * \param memlimit How much memory the resulting Index is allowed + * to require. + * + * The only valid action value for lzma_code() is LZMA_RUN. + * + * \return - LZMA_OK: Initialization succeeded, continue with lzma_code(). + * - LZMA_MEM_ERROR + * - LZMA_MEMLIMIT_ERROR + * - LZMA_PROG_ERROR + * + * \note The memory usage limit is checked early in the decoding + * (within the first dozen input bytes or so). The actual memory + * is allocated later in smaller pieces. If the memory usage + * limit is modified with lzma_memlimit_set() after a part + * of the Index has already been decoded, the new limit may + * get ignored. + */ +extern LZMA_API(lzma_ret) lzma_index_decoder( + lzma_stream *strm, lzma_index **i, uint64_t memlimit) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Single-call .xz Index encoder + * + * \param i Index to be encoded. The read position will be at + * the end of the Index if encoding succeeds, or at + * unspecified position in case an error occurs. + * \param out Beginning of the output buffer + * \param out_pos The next byte will be written to out[*out_pos]. + * *out_pos is updated only if encoding succeeds. + * \param out_size Size of the out buffer; the first byte into + * which no data is written to is out[out_size]. + * + * \return - LZMA_OK: Encoding was successful. + * - LZMA_BUF_ERROR: Output buffer is too small. Use + * lzma_index_size() to find out how much output + * space is needed. + * - LZMA_PROG_ERROR + * + * \note This function doesn't take allocator argument since all + * the internal data is allocated on stack. + */ +extern LZMA_API(lzma_ret) lzma_index_buffer_encode(lzma_index *i, + uint8_t *out, size_t *out_pos, size_t out_size) lzma_nothrow; + + +/** + * \brief Single-call .xz Index decoder + * + * \param i Pointer to a pointer that will be made to point + * to the final decoded Index if decoding is + * successful. That is, lzma_index_buffer_decode() + * always takes care of allocating a new + * lzma_index structure, and *i doesn't need to be + * initialized by the caller. + * \param memlimit Pointer to how much memory the resulting Index + * is allowed to require. The value pointed by + * this pointer is modified if and only if + * LZMA_MEMLIMIT_ERROR is returned. + * \param allocator Pointer to lzma_allocator, or NULL to use malloc() + * \param in Beginning of the input buffer + * \param in_pos The next byte will be read from in[*in_pos]. + * *in_pos is updated only if decoding succeeds. + * \param in_size Size of the input buffer; the first byte that + * won't be read is in[in_size]. + * + * \return - LZMA_OK: Decoding was successful. + * - LZMA_MEM_ERROR + * - LZMA_MEMLIMIT_ERROR: Memory usage limit was reached. + * The minimum required memlimit value was stored to *memlimit. + * - LZMA_DATA_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_index_buffer_decode(lzma_index **i, + uint64_t *memlimit, lzma_allocator *allocator, + const uint8_t *in, size_t *in_pos, size_t in_size) + lzma_nothrow; diff --git a/headers/lzma/index_hash.h b/headers/lzma/index_hash.h new file mode 100644 index 0000000..94726e7 --- /dev/null +++ b/headers/lzma/index_hash.h @@ -0,0 +1,107 @@ +/** + * \file lzma/index_hash.h + * \brief Validates Index by using a hash function + * + * Hashing makes it possible to use constant amount of memory to validate + * Index of arbitrary size. + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + +/** + * \brief Opaque data type to hold the Index hash + */ +typedef struct lzma_index_hash_s lzma_index_hash; + + +/** + * \brief Allocate and initialize a new lzma_index_hash structure + * + * If index_hash is NULL, a new lzma_index_hash structure is allocated, + * initialized, and a pointer to it returned. If allocation fails, NULL + * is returned. + * + * If index_hash is non-NULL, it is reinitialized and the same pointer + * returned. In this case, return value cannot be NULL or a different + * pointer than the index_hash that was given as an argument. + */ +extern LZMA_API(lzma_index_hash *) lzma_index_hash_init( + lzma_index_hash *index_hash, lzma_allocator *allocator) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Deallocate lzma_index_hash structure + */ +extern LZMA_API(void) lzma_index_hash_end( + lzma_index_hash *index_hash, lzma_allocator *allocator) + lzma_nothrow; + + +/** + * \brief Add a new Record to an Index hash + * + * \param index Pointer to a lzma_index_hash structure + * \param unpadded_size Unpadded Size of a Block + * \param uncompressed_size Uncompressed Size of a Block + * + * \return - LZMA_OK + * - LZMA_DATA_ERROR: Compressed or uncompressed size of the + * Stream or size of the Index field would grow too big. + * - LZMA_PROG_ERROR: Invalid arguments or this function is being + * used when lzma_index_hash_decode() has already been used. + */ +extern LZMA_API(lzma_ret) lzma_index_hash_append(lzma_index_hash *index_hash, + lzma_vli unpadded_size, lzma_vli uncompressed_size) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Decode and validate the Index field + * + * After telling the sizes of all Blocks with lzma_index_hash_append(), + * the actual Index field is decoded with this function. Specifically, + * once decoding of the Index field has been started, no more Records + * can be added using lzma_index_hash_append(). + * + * This function doesn't use lzma_stream structure to pass the input data. + * Instead, the input buffer is specified using three arguments. This is + * because it matches better the internal APIs of liblzma. + * + * \param index_hash Pointer to a lzma_index_hash structure + * \param in Pointer to the beginning of the input buffer + * \param in_pos in[*in_pos] is the next byte to process + * \param in_size in[in_size] is the first byte not to process + * + * \return - LZMA_OK: So far good, but more input is needed. + * - LZMA_STREAM_END: Index decoded successfully and it matches + * the Records given with lzma_index_hash_append(). + * - LZMA_DATA_ERROR: Index is corrupt or doesn't match the + * information given with lzma_index_hash_append(). + * - LZMA_BUF_ERROR: Cannot progress because *in_pos >= in_size. + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_index_hash_decode(lzma_index_hash *index_hash, + const uint8_t *in, size_t *in_pos, size_t in_size) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Get the size of the Index field as bytes + * + * This is needed to verify the Backward Size field in the Stream Footer. + */ +extern LZMA_API(lzma_vli) lzma_index_hash_size( + const lzma_index_hash *index_hash) + lzma_nothrow lzma_attr_pure; diff --git a/headers/lzma/lzma.h b/headers/lzma/lzma.h new file mode 100644 index 0000000..28ebbb1 --- /dev/null +++ b/headers/lzma/lzma.h @@ -0,0 +1,410 @@ +/** + * \file lzma/lzma.h + * \brief LZMA1 and LZMA2 filters + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/** + * \brief LZMA1 Filter ID + * + * LZMA1 is the very same thing as what was called just LZMA in LZMA Utils, + * 7-Zip, and LZMA SDK. It's called LZMA1 here to prevent developers from + * accidentally using LZMA when they actually want LZMA2. + * + * LZMA1 shouldn't be used for new applications unless you _really_ know + * what you are doing. LZMA2 is almost always a better choice. + */ +#define LZMA_FILTER_LZMA1 LZMA_VLI_C(0x4000000000000001) + +/** + * \brief LZMA2 Filter ID + * + * Usually you want this instead of LZMA1. Compared to LZMA1, LZMA2 adds + * support for LZMA_SYNC_FLUSH, uncompressed chunks (smaller expansion + * when trying to compress uncompressible data), possibility to change + * lc/lp/pb in the middle of encoding, and some other internal improvements. + */ +#define LZMA_FILTER_LZMA2 LZMA_VLI_C(0x21) + + +/** + * \brief Match finders + * + * Match finder has major effect on both speed and compression ratio. + * Usually hash chains are faster than binary trees. + * + * The memory usage formulas are only rough estimates, which are closest to + * reality when dict_size is a power of two. The formulas are more complex + * in reality, and can also change a little between liblzma versions. Use + * lzma_memusage_encoder() to get more accurate estimate of memory usage. + */ +typedef enum { + LZMA_MF_HC3 = 0x03, + /**< + * \brief Hash Chain with 2- and 3-byte hashing + * + * Minimum nice_len: 3 + * + * Memory usage: + * - dict_size <= 16 MiB: dict_size * 7.5 + * - dict_size > 16 MiB: dict_size * 5.5 + 64 MiB + */ + + LZMA_MF_HC4 = 0x04, + /**< + * \brief Hash Chain with 2-, 3-, and 4-byte hashing + * + * Minimum nice_len: 4 + * + * Memory usage: dict_size * 7.5 + */ + + LZMA_MF_BT2 = 0x12, + /**< + * \brief Binary Tree with 2-byte hashing + * + * Minimum nice_len: 2 + * + * Memory usage: dict_size * 9.5 + */ + + LZMA_MF_BT3 = 0x13, + /**< + * \brief Binary Tree with 2- and 3-byte hashing + * + * Minimum nice_len: 3 + * + * Memory usage: + * - dict_size <= 16 MiB: dict_size * 11.5 + * - dict_size > 16 MiB: dict_size * 9.5 + 64 MiB + */ + + LZMA_MF_BT4 = 0x14 + /**< + * \brief Binary Tree with 2-, 3-, and 4-byte hashing + * + * Minimum nice_len: 4 + * + * Memory usage: dict_size * 11.5 + */ +} lzma_match_finder; + + +/** + * \brief Test if given match finder is supported + * + * Return true if the given match finder is supported by this liblzma build. + * Otherwise false is returned. It is safe to call this with a value that + * isn't listed in lzma_match_finder enumeration; the return value will be + * false. + * + * There is no way to list which match finders are available in this + * particular liblzma version and build. It would be useless, because + * a new match finder, which the application developer wasn't aware, + * could require giving additional options to the encoder that the older + * match finders don't need. + */ +extern LZMA_API(lzma_bool) lzma_mf_is_supported(lzma_match_finder match_finder) + lzma_nothrow lzma_attr_const; + + +/** + * \brief Compression modes + * + * This selects the function used to analyze the data produced by the match + * finder. + */ +typedef enum { + LZMA_MODE_FAST = 1, + /**< + * \brief Fast compression + * + * Fast mode is usually at its best when combined with + * a hash chain match finder. + */ + + LZMA_MODE_NORMAL = 2 + /**< + * \brief Normal compression + * + * This is usually notably slower than fast mode. Use this + * together with binary tree match finders to expose the + * full potential of the LZMA1 or LZMA2 encoder. + */ +} lzma_mode; + + +/** + * \brief Test if given compression mode is supported + * + * Return true if the given compression mode is supported by this liblzma + * build. Otherwise false is returned. It is safe to call this with a value + * that isn't listed in lzma_mode enumeration; the return value will be false. + * + * There is no way to list which modes are available in this particular + * liblzma version and build. It would be useless, because a new compression + * mode, which the application developer wasn't aware, could require giving + * additional options to the encoder that the older modes don't need. + */ +extern LZMA_API(lzma_bool) lzma_mode_is_supported(lzma_mode mode) + lzma_nothrow lzma_attr_const; + + +/** + * \brief Options specific to the LZMA1 and LZMA2 filters + * + * Since LZMA1 and LZMA2 share most of the code, it's simplest to share + * the options structure too. For encoding, all but the reserved variables + * need to be initialized unless specifically mentioned otherwise. + * + * For raw decoding, both LZMA1 and LZMA2 need dict_size, preset_dict, and + * preset_dict_size (if preset_dict != NULL). LZMA1 needs also lc, lp, and pb. + */ +typedef struct { + /** + * \brief Dictionary size in bytes + * + * Dictionary size indicates how many bytes of the recently processed + * uncompressed data is kept in memory. One method to reduce size of + * the uncompressed data is to store distance-length pairs, which + * indicate what data to repeat from the dictionary buffer. Thus, + * the bigger the dictionary, the better the compression ratio + * usually is. + * + * Maximum size of the dictionary depends on multiple things: + * - Memory usage limit + * - Available address space (not a problem on 64-bit systems) + * - Selected match finder (encoder only) + * + * Currently the maximum dictionary size for encoding is 1.5 GiB + * (i.e. (UINT32_C(1) << 30) + (UINT32_C(1) << 29)) even on 64-bit + * systems for certain match finder implementation reasons. In the + * future, there may be match finders that support bigger + * dictionaries. + * + * Decoder already supports dictionaries up to 4 GiB - 1 B (i.e. + * UINT32_MAX), so increasing the maximum dictionary size of the + * encoder won't cause problems for old decoders. + * + * Because extremely small dictionaries sizes would have unneeded + * overhead in the decoder, the minimum dictionary size is 4096 bytes. + * + * \note When decoding, too big dictionary does no other harm + * than wasting memory. + */ + uint32_t dict_size; +# define LZMA_DICT_SIZE_MIN UINT32_C(4096) +# define LZMA_DICT_SIZE_DEFAULT (UINT32_C(1) << 23) + + /** + * \brief Pointer to an initial dictionary + * + * It is possible to initialize the LZ77 history window using + * a preset dictionary. It is useful when compressing many + * similar, relatively small chunks of data independently from + * each other. The preset dictionary should contain typical + * strings that occur in the files being compressed. The most + * probable strings should be near the end of the preset dictionary. + * + * This feature should be used only in special situations. For + * now, it works correctly only with raw encoding and decoding. + * Currently none of the container formats supported by + * liblzma allow preset dictionary when decoding, thus if + * you create a .xz or .lzma file with preset dictionary, it + * cannot be decoded with the regular decoder functions. In the + * future, the .xz format will likely get support for preset + * dictionary though. + */ + const uint8_t *preset_dict; + + /** + * \brief Size of the preset dictionary + * + * Specifies the size of the preset dictionary. If the size is + * bigger than dict_size, only the last dict_size bytes are + * processed. + * + * This variable is read only when preset_dict is not NULL. + * If preset_dict is not NULL but preset_dict_size is zero, + * no preset dictionary is used (identical to only setting + * preset_dict to NULL). + */ + uint32_t preset_dict_size; + + /** + * \brief Number of literal context bits + * + * How many of the highest bits of the previous uncompressed + * eight-bit byte (also known as `literal') are taken into + * account when predicting the bits of the next literal. + * + * \todo Example + * + * There is a limit that applies to literal context bits and literal + * position bits together: lc + lp <= 4. Without this limit the + * decoding could become very slow, which could have security related + * results in some cases like email servers doing virus scanning. + * This limit also simplifies the internal implementation in liblzma. + * + * There may be LZMA1 streams that have lc + lp > 4 (maximum possible + * lc would be 8). It is not possible to decode such streams with + * liblzma. + */ + uint32_t lc; +# define LZMA_LCLP_MIN 0 +# define LZMA_LCLP_MAX 4 +# define LZMA_LC_DEFAULT 3 + + /** + * \brief Number of literal position bits + * + * How many of the lowest bits of the current position (number + * of bytes from the beginning of the uncompressed data) in the + * uncompressed data is taken into account when predicting the + * bits of the next literal (a single eight-bit byte). + * + * \todo Example + */ + uint32_t lp; +# define LZMA_LP_DEFAULT 0 + + /** + * \brief Number of position bits + * + * How many of the lowest bits of the current position in the + * uncompressed data is taken into account when estimating + * probabilities of matches. A match is a sequence of bytes for + * which a matching sequence is found from the dictionary and + * thus can be stored as distance-length pair. + * + * Example: If most of the matches occur at byte positions of + * 8 * n + 3, that is, 3, 11, 19, ... set pb to 3, because 2**3 == 8. + */ + uint32_t pb; +# define LZMA_PB_MIN 0 +# define LZMA_PB_MAX 4 +# define LZMA_PB_DEFAULT 2 + + /** + * \brief Indicate if the options structure is persistent + * + * If this is true, the application must keep this options structure + * available after the LZMA2 encoder has been initialized. With + * persistent structure it is possible to change some encoder options + * in the middle of the encoding process without resetting the encoder. + * + * This option is used only by LZMA2. LZMA1 ignores this and it is + * safe to not initialize this when encoding with LZMA1. + */ + lzma_bool persistent; + + /** Compression mode */ + lzma_mode mode; + + /** + * \brief Nice length of a match + * + * This determines how many bytes the encoder compares from the match + * candidates when looking for the best match. Once a match of at + * least nice_len bytes long is found, the encoder stops looking for + * better condidates and encodes the match. (Naturally, if the found + * match is actually longer than nice_len, the actual length is + * encoded; it's not truncated to nice_len.) + * + * Bigger values usually increase the compression ratio and + * compression time. For most files, 32 to 128 is a good value, + * which gives very good compression ratio at good speed. + * + * The exact minimum value depends on the match finder. The maximum + * is 273, which is the maximum length of a match that LZMA1 and + * LZMA2 can encode. + */ + uint32_t nice_len; + + /** Match finder ID */ + lzma_match_finder mf; + + /** + * \brief Maximum search depth in the match finder + * + * For every input byte, match finder searches through the hash chain + * or binary tree in a loop, each iteration going one step deeper in + * the chain or tree. The searching stops if + * - a match of at least nice_len bytes long is found; + * - all match candidates from the hash chain or binary tree have + * been checked; or + * - maximum search depth is reached. + * + * Maximum search depth is needed to prevent the match finder from + * wasting too much time in case there are lots of short match + * candidates. On the other hand, stopping the search before all + * candidates have been checked can reduce compression ratio. + * + * Setting depth to zero tells liblzma to use an automatic default + * value, that depends on the selected match finder and nice_len. + * The default is in the range [10, 200] or so (it may vary between + * liblzma versions). + * + * Using a bigger depth value than the default can increase + * compression ratio in some cases. There is no strict maximum value, + * but high values (thousands or millions) should be used with care: + * the encoder could remain fast enough with typical input, but + * malicious input could cause the match finder to slow down + * dramatically, possibly creating a denial of service attack. + */ + uint32_t depth; + + /* + * Reserved space to allow possible future extensions without + * breaking the ABI. You should not touch these, because the names + * of these variables may change. These are and will never be used + * with the currently supported options, so it is safe to leave these + * uninitialized. + */ + void *reserved_ptr1; + void *reserved_ptr2; + uint32_t reserved_int1; + uint32_t reserved_int2; + uint32_t reserved_int3; + uint32_t reserved_int4; + uint32_t reserved_int5; + uint32_t reserved_int6; + uint32_t reserved_int7; + uint32_t reserved_int8; + lzma_reserved_enum reserved_enum1; + lzma_reserved_enum reserved_enum2; + lzma_reserved_enum reserved_enum3; + lzma_reserved_enum reserved_enum4; + +} lzma_options_lzma; + + +/** + * \brief Set a compression preset to lzma_options_lzma structure + * + * 0 is the fastest and 9 is the slowest. These match the switches -0 .. -9 + * of the xz command line tool. In addition, it is possible to bitwise-or + * flags to the preset. Currently only LZMA_PRESET_EXTREME is supported. + * The flags are defined in container.h, because the flags are used also + * with lzma_easy_encoder(). + * + * The preset values are subject to changes between liblzma versions. + * + * This function is available only if LZMA1 or LZMA2 encoder has been enabled + * when building liblzma. + */ +extern LZMA_API(lzma_bool) lzma_lzma_preset( + lzma_options_lzma *options, uint32_t preset) lzma_nothrow; diff --git a/headers/lzma/stream_flags.h b/headers/lzma/stream_flags.h new file mode 100644 index 0000000..d255bdd --- /dev/null +++ b/headers/lzma/stream_flags.h @@ -0,0 +1,227 @@ +/** + * \file lzma/stream_flags.h + * \brief .xz Stream Header and Stream Footer encoder and decoder + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/** + * \brief Size of Stream Header and Stream Footer + * + * Stream Header and Stream Footer have the same size and they are not + * going to change even if a newer version of the .xz file format is + * developed in future. + */ +#define LZMA_STREAM_HEADER_SIZE 12 + + +/** + * \brief Options for encoding/decoding Stream Header and Stream Footer + */ +typedef struct { + /** + * \brief Stream Flags format version + * + * To prevent API and ABI breakages if new features are needed in + * Stream Header or Stream Footer, a version number is used to + * indicate which fields in this structure are in use. For now, + * version must always be zero. With non-zero version, the + * lzma_stream_header_encode() and lzma_stream_footer_encode() + * will return LZMA_OPTIONS_ERROR. + * + * lzma_stream_header_decode() and lzma_stream_footer_decode() + * will always set this to the lowest value that supports all the + * features indicated by the Stream Flags field. The application + * must check that the version number set by the decoding functions + * is supported by the application. Otherwise it is possible that + * the application will decode the Stream incorrectly. + */ + uint32_t version; + + /** + * \brief Backward Size + * + * Backward Size must be a multiple of four bytes. In this Stream + * format version, Backward Size is the size of the Index field. + * + * Backward Size isn't actually part of the Stream Flags field, but + * it is convenient to include in this structure anyway. Backward + * Size is present only in the Stream Footer. There is no need to + * initialize backward_size when encoding Stream Header. + * + * lzma_stream_header_decode() always sets backward_size to + * LZMA_VLI_UNKNOWN so that it is convenient to use + * lzma_stream_flags_compare() when both Stream Header and Stream + * Footer have been decoded. + */ + lzma_vli backward_size; +# define LZMA_BACKWARD_SIZE_MIN 4 +# define LZMA_BACKWARD_SIZE_MAX (LZMA_VLI_C(1) << 34) + + /** + * \brief Check ID + * + * This indicates the type of the integrity check calculated from + * uncompressed data. + */ + lzma_check check; + + /* + * Reserved space to allow possible future extensions without + * breaking the ABI. You should not touch these, because the + * names of these variables may change. + * + * (We will never be able to use all of these since Stream Flags + * is just two bytes plus Backward Size of four bytes. But it's + * nice to have the proper types when they are needed.) + */ + lzma_reserved_enum reserved_enum1; + lzma_reserved_enum reserved_enum2; + lzma_reserved_enum reserved_enum3; + lzma_reserved_enum reserved_enum4; + lzma_reserved_enum reserved_enum5; + lzma_reserved_enum reserved_enum6; + lzma_bool reserved_bool1; + lzma_bool reserved_bool2; + lzma_bool reserved_bool3; + lzma_bool reserved_bool4; + lzma_bool reserved_bool5; + lzma_bool reserved_bool6; + lzma_bool reserved_bool7; + lzma_bool reserved_bool8; + uint32_t reserved_int1; + uint32_t reserved_int2; + uint32_t reserved_int3; + uint32_t reserved_int4; + +} lzma_stream_flags; + + +/** + * \brief Encode Stream Header + * + * \param options Stream Header options to be encoded. + * options->backward_size is ignored and doesn't + * need to be initialized. + * \param out Beginning of the output buffer of + * LZMA_STREAM_HEADER_SIZE bytes. + * + * \return - LZMA_OK: Encoding was successful. + * - LZMA_OPTIONS_ERROR: options->version is not supported by + * this liblzma version. + * - LZMA_PROG_ERROR: Invalid options. + */ +extern LZMA_API(lzma_ret) lzma_stream_header_encode( + const lzma_stream_flags *options, uint8_t *out) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Encode Stream Footer + * + * \param options Stream Footer options to be encoded. + * \param out Beginning of the output buffer of + * LZMA_STREAM_HEADER_SIZE bytes. + * + * \return - LZMA_OK: Encoding was successful. + * - LZMA_OPTIONS_ERROR: options->version is not supported by + * this liblzma version. + * - LZMA_PROG_ERROR: Invalid options. + */ +extern LZMA_API(lzma_ret) lzma_stream_footer_encode( + const lzma_stream_flags *options, uint8_t *out) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Decode Stream Header + * + * \param options Stream Header options to be encoded. + * \param in Beginning of the input buffer of + * LZMA_STREAM_HEADER_SIZE bytes. + * + * options->backward_size is always set to LZMA_VLI_UNKNOWN. This is to + * help comparing Stream Flags from Stream Header and Stream Footer with + * lzma_stream_flags_compare(). + * + * \return - LZMA_OK: Decoding was successful. + * - LZMA_FORMAT_ERROR: Magic bytes don't match, thus the given + * buffer cannot be Stream Header. + * - LZMA_DATA_ERROR: CRC32 doesn't match, thus the header + * is corrupt. + * - LZMA_OPTIONS_ERROR: Unsupported options are present + * in the header. + * + * \note When decoding .xz files that contain multiple Streams, it may + * make sense to print "file format not recognized" only if + * decoding of the Stream Header of the _first_ Stream gives + * LZMA_FORMAT_ERROR. If non-first Stream Header gives + * LZMA_FORMAT_ERROR, the message used for LZMA_DATA_ERROR is + * probably more appropriate. + * + * For example, Stream decoder in liblzma uses LZMA_DATA_ERROR if + * LZMA_FORMAT_ERROR is returned by lzma_stream_header_decode() + * when decoding non-first Stream. + */ +extern LZMA_API(lzma_ret) lzma_stream_header_decode( + lzma_stream_flags *options, const uint8_t *in) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Decode Stream Footer + * + * \param options Stream Header options to be encoded. + * \param in Beginning of the input buffer of + * LZMA_STREAM_HEADER_SIZE bytes. + * + * \return - LZMA_OK: Decoding was successful. + * - LZMA_FORMAT_ERROR: Magic bytes don't match, thus the given + * buffer cannot be Stream Footer. + * - LZMA_DATA_ERROR: CRC32 doesn't match, thus the Stream Footer + * is corrupt. + * - LZMA_OPTIONS_ERROR: Unsupported options are present + * in Stream Footer. + * + * \note If Stream Header was already decoded successfully, but + * decoding Stream Footer returns LZMA_FORMAT_ERROR, the + * application should probably report some other error message + * than "file format not recognized", since the file more likely + * is corrupt (possibly truncated). Stream decoder in liblzma + * uses LZMA_DATA_ERROR in this situation. + */ +extern LZMA_API(lzma_ret) lzma_stream_footer_decode( + lzma_stream_flags *options, const uint8_t *in) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Compare two lzma_stream_flags structures + * + * backward_size values are compared only if both are not + * LZMA_VLI_UNKNOWN. + * + * \return - LZMA_OK: Both are equal. If either had backward_size set + * to LZMA_VLI_UNKNOWN, backward_size values were not + * compared or validated. + * - LZMA_DATA_ERROR: The structures differ. + * - LZMA_OPTIONS_ERROR: version in either structure is greater + * than the maximum supported version (currently zero). + * - LZMA_PROG_ERROR: Invalid value, e.g. invalid check or + * backward_size. + */ +extern LZMA_API(lzma_ret) lzma_stream_flags_compare( + const lzma_stream_flags *a, const lzma_stream_flags *b) + lzma_nothrow lzma_attr_pure; diff --git a/headers/lzma/subblock.h b/headers/lzma/subblock.h new file mode 100644 index 0000000..4ffb049 --- /dev/null +++ b/headers/lzma/subblock.h @@ -0,0 +1,200 @@ +/** + * \file lzma/subblock.h + * \brief Subblock filter + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/** + * \brief Filter ID + * + * Filter ID of the Subblock filter. This is used as lzma_filter.id. + */ +#define LZMA_FILTER_SUBBLOCK LZMA_VLI_C(0x01) + + +/** + * \brief Subfilter mode + * + * See lzma_options_subblock.subfilter_mode for details. + */ +typedef enum { + LZMA_SUBFILTER_NONE, + /**< + * No Subfilter is in use. + */ + + LZMA_SUBFILTER_SET, + /**< + * New Subfilter has been requested to be initialized. + */ + + LZMA_SUBFILTER_RUN, + /**< + * Subfilter is active. + */ + + LZMA_SUBFILTER_FINISH + /**< + * Subfilter has been requested to be finished. + */ +} lzma_subfilter_mode; + + +/** + * \brief Options for the Subblock filter + * + * Specifying options for the Subblock filter is optional: if the pointer + * options is NULL, no subfilters are allowed and the default value is used + * for subblock_data_size. + */ +typedef struct { + /* Options for encoder and decoder */ + + /** + * \brief Allowing subfilters + * + * If this true, subfilters are allowed. + * + * In the encoder, if this is set to false, subfilter_mode and + * subfilter_options are completely ignored. + */ + lzma_bool allow_subfilters; + + /* Options for encoder only */ + + /** + * \brief Alignment + * + * The Subblock filter encapsulates the input data into Subblocks. + * Each Subblock has a header which takes a few bytes of space. + * When the output of the Subblock encoder is fed to another filter + * that takes advantage of the alignment of the input data (e.g. LZMA), + * the Subblock filter can add padding to keep the actual data parts + * in the Subblocks aligned correctly. + * + * The alignment should be a positive integer. Subblock filter will + * add enough padding between Subblocks so that this is true for + * every payload byte: + * input_offset % alignment == output_offset % alignment + * + * The Subblock filter assumes that the first output byte will be + * written to a position in the output stream that is properly + * aligned. This requirement is automatically met when the start + * offset of the Stream or Block is correctly told to Block or + * Stream encoder. + */ + uint32_t alignment; +# define LZMA_SUBBLOCK_ALIGNMENT_MIN 1 +# define LZMA_SUBBLOCK_ALIGNMENT_MAX 32 +# define LZMA_SUBBLOCK_ALIGNMENT_DEFAULT 4 + + /** + * \brief Size of the Subblock Data part of each Subblock + * + * This value is re-read every time a new Subblock is started. + * + * Bigger values + * - save a few bytes of space; + * - increase latency in the encoder (but no effect for decoding); + * - decrease memory locality (increased cache pollution) in the + * encoder (no effect in decoding). + */ + uint32_t subblock_data_size; +# define LZMA_SUBBLOCK_DATA_SIZE_MIN 1 +# define LZMA_SUBBLOCK_DATA_SIZE_MAX (UINT32_C(1) << 28) +# define LZMA_SUBBLOCK_DATA_SIZE_DEFAULT 4096 + + /** + * \brief Run-length encoder remote control + * + * The Subblock filter has an internal run-length encoder (RLE). It + * can be useful when the data includes byte sequences that repeat + * very many times. The RLE can be used also when a Subfilter is + * in use; the RLE will be applied to the output of the Subfilter. + * + * Note that in contrast to traditional RLE, this RLE is intended to + * be used only when there's a lot of data to be repeated. If the + * input data has e.g. 500 bytes of NULs now and then, this RLE + * is probably useless, because plain LZMA should provide better + * results. + * + * Due to above reasons, it was decided to keep the implementation + * of the RLE very simple. When the rle variable is non-zero, it + * subblock_data_size must be a multiple of rle. Once the Subblock + * encoder has got subblock_data_size bytes of input, it will check + * if the whole buffer of the last subblock_data_size can be + * represented with repeats of chunks having size of rle bytes. + * + * If there are consecutive identical buffers of subblock_data_size + * bytes, they will be encoded using a single repeat entry if + * possible. + * + * If need arises, more advanced RLE can be implemented later + * without breaking API or ABI. + */ + uint32_t rle; +# define LZMA_SUBBLOCK_RLE_OFF 0 +# define LZMA_SUBBLOCK_RLE_MIN 1 +# define LZMA_SUBBLOCK_RLE_MAX 256 + + /** + * \brief Subfilter remote control + * + * When the Subblock filter is initialized, this variable must be + * LZMA_SUBFILTER_NONE or LZMA_SUBFILTER_SET. + * + * When subfilter_mode is LZMA_SUBFILTER_NONE, the application may + * put Subfilter options to subfilter_options structure, and then + * set subfilter_mode to LZMA_SUBFILTER_SET. No new input data will + * be read until the Subfilter has been enabled. Once the Subfilter + * has been enabled, liblzma will set subfilter_mode to + * LZMA_SUBFILTER_RUN. + * + * When subfilter_mode is LZMA_SUBFILTER_RUN, the application may + * set subfilter_mode to LZMA_SUBFILTER_FINISH. All the input + * currently available will be encoded before unsetting the + * Subfilter. Application must not change the amount of available + * input until the Subfilter has finished. Once the Subfilter has + * finished, liblzma will set subfilter_mode to LZMA_SUBFILTER_NONE. + * + * If the intent is to have Subfilter enabled to the very end of + * the data, it is not needed to separately disable Subfilter with + * LZMA_SUBFILTER_FINISH. Using LZMA_FINISH as the second argument + * of lzma_code() will make the Subblock encoder to disable the + * Subfilter once all the data has been ran through the Subfilter. + * + * After the first call with LZMA_SYNC_FLUSH or LZMA_FINISH, the + * application must not change subfilter_mode until LZMA_STREAM_END. + * Setting LZMA_SUBFILTER_SET/LZMA_SUBFILTER_FINISH and + * LZMA_SYNC_FLUSH/LZMA_FINISH _at the same time_ is fine. + * + * \note This variable is ignored if allow_subfilters is false. + */ + lzma_subfilter_mode subfilter_mode; + + /** + * \brief Subfilter and its options + * + * When no Subfilter is used, the data is copied as is into Subblocks. + * Setting a Subfilter allows encoding some parts of the data with + * an additional filter. It is possible to many different Subfilters + * in the same Block, although only one can be used at once. + * + * \note This variable is ignored if allow_subfilters is false. + */ + lzma_filter subfilter_options; + +} lzma_options_subblock; diff --git a/headers/lzma/version.h b/headers/lzma/version.h new file mode 100644 index 0000000..36b7952 --- /dev/null +++ b/headers/lzma/version.h @@ -0,0 +1,121 @@ +/** + * \file lzma/version.h + * \brief Version number + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/* + * Version number splitted in components + */ +#define LZMA_VERSION_MAJOR 4 +#define LZMA_VERSION_MINOR 999 +#define LZMA_VERSION_PATCH 9 +#define LZMA_VERSION_STABILITY LZMA_VERSION_STABILITY_BETA + +#ifndef LZMA_VERSION_COMMIT +# define LZMA_VERSION_COMMIT "" +#endif + + +/* + * Map symbolic stability levels to integers. + */ +#define LZMA_VERSION_STABILITY_ALPHA 0 +#define LZMA_VERSION_STABILITY_BETA 1 +#define LZMA_VERSION_STABILITY_STABLE 2 + + +/** + * \brief Compile-time version number + * + * The version number is of format xyyyzzzs where + * - x = major + * - yyy = minor + * - zzz = revision + * - s indicates stability: 0 = alpha, 1 = beta, 2 = stable + * + * The same xyyyzzz triplet is never reused with different stability levels. + * For example, if 5.1.0alpha has been released, there will never be 5.1.0beta + * or 5.1.0 stable. + * + * \note The version number of liblzma has nothing to with + * the version number of Igor Pavlov's LZMA SDK. + */ +#define LZMA_VERSION (LZMA_VERSION_MAJOR * UINT32_C(10000000) \ + + LZMA_VERSION_MINOR * UINT32_C(10000) \ + + LZMA_VERSION_PATCH * UINT32_C(10) \ + + LZMA_VERSION_STABILITY) + + +/* + * Macros to construct the compile-time version string + */ +#if LZMA_VERSION_STABILITY == LZMA_VERSION_STABILITY_ALPHA +# define LZMA_VERSION_STABILITY_STRING "alpha" +#elif LZMA_VERSION_STABILITY == LZMA_VERSION_STABILITY_BETA +# define LZMA_VERSION_STABILITY_STRING "beta" +#elif LZMA_VERSION_STABILITY == LZMA_VERSION_STABILITY_STABLE +# define LZMA_VERSION_STABILITY_STRING "" +#else +# error Incorrect LZMA_VERSION_STABILITY +#endif + +#define LZMA_VERSION_STRING_C_(major, minor, patch, stability, commit) \ + #major "." #minor "." #patch stability commit + +#define LZMA_VERSION_STRING_C(major, minor, patch, stability, commit) \ + LZMA_VERSION_STRING_C_(major, minor, patch, stability, commit) + + +/** + * \brief Compile-time version as a string + * + * This can be for example "4.999.5alpha", "4.999.8beta", or "5.0.0" (stable + * versions don't have any "stable" suffix). In future, a snapshot built + * from source code repository may include an additional suffix, for example + * "4.999.8beta-21-g1d92". The commit ID won't be available in numeric form + * in LZMA_VERSION macro. + */ +#define LZMA_VERSION_STRING LZMA_VERSION_STRING_C( \ + LZMA_VERSION_MAJOR, LZMA_VERSION_MINOR, \ + LZMA_VERSION_PATCH, LZMA_VERSION_STABILITY_STRING, \ + LZMA_VERSION_COMMIT) + + +/* #ifndef is needed for use with windres (MinGW or Cygwin). */ +#ifndef LZMA_H_INTERNAL_RC + +/** + * \brief Run-time version number as an integer + * + * Return the value of LZMA_VERSION macro at the compile time of liblzma. + * This allows the application to compare if it was built against the same, + * older, or newer version of liblzma that is currently running. + */ +extern LZMA_API(uint32_t) lzma_version_number(void) + lzma_nothrow lzma_attr_const; + + +/** + * \brief Run-time version as a string + * + * This function may be useful if you want to display which version of + * liblzma your application is currently using. + */ +extern LZMA_API(const char *) lzma_version_string(void) + lzma_nothrow lzma_attr_const; + +#endif diff --git a/headers/lzma/vli.h b/headers/lzma/vli.h new file mode 100644 index 0000000..f002c77 --- /dev/null +++ b/headers/lzma/vli.h @@ -0,0 +1,168 @@ +/** + * \file lzma/vli.h + * \brief Variable-length integer handling + * + * In the .xz format, most integers are encoded in a variable-length + * representation, which is sometimes called little endian base-128 encoding. + * This saves space when smaller values are more likely than bigger values. + * + * The encoding scheme encodes seven bits to every byte, using minimum + * number of bytes required to represent the given value. Encodings that use + * non-minimum number of bytes are invalid, thus every integer has exactly + * one encoded representation. The maximum number of bits in a VLI is 63, + * thus the vli argument must be at maximum of UINT64_MAX / 2. You should + * use LZMA_VLI_MAX for clarity. + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/** + * \brief Maximum supported value of variable-length integer + */ +#define LZMA_VLI_MAX (UINT64_MAX / 2) + +/** + * \brief VLI value to denote that the value is unknown + */ +#define LZMA_VLI_UNKNOWN UINT64_MAX + +/** + * \brief Maximum supported length of variable length integers + */ +#define LZMA_VLI_BYTES_MAX 9 + + +/** + * \brief VLI constant suffix + */ +#define LZMA_VLI_C(n) UINT64_C(n) + + +/** + * \brief Variable-length integer type + * + * This will always be unsigned integer. Valid VLI values are in the range + * [0, LZMA_VLI_MAX]. Unknown value is indicated with LZMA_VLI_UNKNOWN, + * which is the maximum value of the underlaying integer type. + * + * In future, even if lzma_vli is typdefined to something else than uint64_t, + * it is guaranteed that 2 * LZMA_VLI_MAX will not overflow lzma_vli. + * This simplifies integer overflow detection. + */ +typedef uint64_t lzma_vli; + + +/** + * \brief Simple macro to validate variable-length integer + * + * This is useful to test that application has given acceptable values + * for example in the uncompressed_size and compressed_size variables. + * + * \return True if the integer is representable as VLI or if it + * indicates unknown value. + */ +#define lzma_vli_is_valid(vli) \ + ((vli) <= LZMA_VLI_MAX || (vli) == LZMA_VLI_UNKNOWN) + + +/** + * \brief Encode a variable-length integer + * + * This function has two modes: single-call and multi-call. Single-call mode + * encodes the whole integer at once; it is an error if the output buffer is + * too small. Multi-call mode saves the position in *vli_pos, and thus it is + * possible to continue encoding if the buffer becomes full before the whole + * integer has been encoded. + * + * \param vli Integer to be encoded + * \param vli_pos How many VLI-encoded bytes have already been written + * out. When starting to encode a new integer, *vli_pos + * must be set to zero. To use single-call encoding, + * set vli_pos to NULL. + * \param out Beginning of the output buffer + * \param out_pos The next byte will be written to out[*out_pos]. + * \param out_size Size of the out buffer; the first byte into + * which no data is written to is out[out_size]. + * + * \return Slightly different return values are used in multi-call and + * single-call modes. + * + * Single-call (vli_pos == NULL): + * - LZMA_OK: Integer successfully encoded. + * - LZMA_PROG_ERROR: Arguments are not sane. This can be due + * to too little output space; single-call mode doesn't use + * LZMA_BUF_ERROR, since the application should have checked + * the encoded size with lzma_vli_size(). + * + * Multi-call (vli_pos != NULL): + * - LZMA_OK: So far all OK, but the integer is not + * completely written out yet. + * - LZMA_STREAM_END: Integer successfully encoded. + * - LZMA_BUF_ERROR: No output space was provided. + * - LZMA_PROG_ERROR: Arguments are not sane. + */ +extern LZMA_API(lzma_ret) lzma_vli_encode(lzma_vli vli, + size_t *lzma_restrict vli_pos, uint8_t *lzma_restrict out, + size_t *lzma_restrict out_pos, size_t out_size) lzma_nothrow; + + +/** + * \brief Decode a variable-length integer + * + * Like lzma_vli_encode(), this function has single-call and multi-call modes. + * + * \param vli Pointer to decoded integer. The decoder will + * initialize it to zero when *vli_pos == 0, so + * application isn't required to initialize *vli. + * \param vli_pos How many bytes have already been decoded. When + * starting to decode a new integer, *vli_pos must + * be initialized to zero. To use single-call decoding, + * set this to NULL. + * \param in Beginning of the input buffer + * \param in_pos The next byte will be read from in[*in_pos]. + * \param in_size Size of the input buffer; the first byte that + * won't be read is in[in_size]. + * + * \return Slightly different return values are used in multi-call and + * single-call modes. + * + * Single-call (vli_pos == NULL): + * - LZMA_OK: Integer successfully decoded. + * - LZMA_DATA_ERROR: Integer is corrupt. This includes hitting + * the end of the input buffer before the whole integer was + * decoded; providing no input at all will use LZMA_DATA_ERROR. + * - LZMA_PROG_ERROR: Arguments are not sane. + * + * Multi-call (vli_pos != NULL): + * - LZMA_OK: So far all OK, but the integer is not + * completely decoded yet. + * - LZMA_STREAM_END: Integer successfully decoded. + * - LZMA_DATA_ERROR: Integer is corrupt. + * - LZMA_BUF_ERROR: No input was provided. + * - LZMA_PROG_ERROR: Arguments are not sane. + */ +extern LZMA_API(lzma_ret) lzma_vli_decode(lzma_vli *lzma_restrict vli, + size_t *lzma_restrict vli_pos, const uint8_t *lzma_restrict in, + size_t *lzma_restrict in_pos, size_t in_size) lzma_nothrow; + + +/** + * \brief Get the number of bytes required to encode a VLI + * + * \return Number of bytes on success (1-9). If vli isn't valid, + * zero is returned. + */ +extern LZMA_API(uint32_t) lzma_vli_size(lzma_vli vli) + lzma_nothrow lzma_attr_pure;