diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_0_kt_1p2/param_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_0_kt_1p2/param_card.dat
new file mode 100644
index 00000000000..58fe372e1c4
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_0_kt_1p2/param_card.dat
@@ -0,0 +1,99 @@
+######################################################################
+## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL   ####
+######################################################################
+##                                                                  ##
+##  Width set on Auto will be computed following the information    ##
+##        present in the decay.py files of the model.               ##
+##        See  arXiv:1402.1178 for more details.                    ##
+##                                                                  ##
+######################################################################
+
+###################################
+## INFORMATION FOR MASS
+###################################
+Block mass 
+    5 4.700000e+00 # MB 
+    6 1.730000e+02 # MT 
+   15 1.777000e+00 # MTA 
+   23 9.118800e+01 # MZ 
+   25 1.250000e+02 # MH 
+## Dependent parameters, given by model restrictions.
+## Those values should be edited following the 
+## analytical expression. MG5 ignores those values 
+## but they are important for interfacing the output of MG5
+## to external program such as Pythia.
+  1 0.000000e+00 # d : 0.0 
+  2 0.000000e+00 # u : 0.0 
+  3 0.000000e+00 # s : 0.0 
+  4 0.000000e+00 # c : 0.0 
+  11 0.000000e+00 # e- : 0.0 
+  12 0.000000e+00 # ve : 0.0 
+  13 0.000000e+00 # mu- : 0.0 
+  14 0.000000e+00 # vm : 0.0 
+  16 0.000000e+00 # vt : 0.0 
+  21 0.000000e+00 # g : 0.0 
+  22 0.000000e+00 # a : 0.0 
+  24 8.041900e+01 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4. - (aEW*cmath.pi*MZ__exp__2)/(Gf*sqrt__2))) 
+
+###################################
+## INFORMATION FOR QUARTCOUP
+###################################
+Block quartcoup 
+    6 0.000000e+00 # d4 
+
+###################################
+## INFORMATION FOR SMINPUTS
+###################################
+Block sminputs 
+    1 1.325070e+02 # aEWM1 
+    2 1.166390e-05 # Gf 
+    3 1.180000e-01 # aS (Note that Parameter not used if you use a PDF set) 
+
+###################################
+## INFORMATION FOR TRIPCOUP
+###################################
+Block tripcoup 
+    4 0.000000e+00 # c3 
+
+###################################
+## INFORMATION FOR YUKAWA
+###################################
+Block yukawa 
+    5 4.700000e+00 # ymb 
+    6 2.076000e+02 # ymt 
+   15 1.777000e+00 # ymtau 
+
+###################################
+## INFORMATION FOR DECAY
+###################################
+DECAY   6 1.491500e+00 # WT 
+DECAY  23 2.441404e+00 # WZ 
+DECAY  24 2.047600e+00 # WW 
+DECAY  25 6.382339e-03 # WH 
+## Dependent parameters, given by model restrictions.
+## Those values should be edited following the 
+## analytical expression. MG5 ignores those values 
+## but they are important for interfacing the output of MG5
+## to external program such as Pythia.
+DECAY  1 0.000000e+00 # d : 0.0 
+DECAY  2 0.000000e+00 # u : 0.0 
+DECAY  3 0.000000e+00 # s : 0.0 
+DECAY  4 0.000000e+00 # c : 0.0 
+DECAY  5 0.000000e+00 # b : 0.0 
+DECAY  11 0.000000e+00 # e- : 0.0 
+DECAY  12 0.000000e+00 # ve : 0.0 
+DECAY  13 0.000000e+00 # mu- : 0.0 
+DECAY  14 0.000000e+00 # vm : 0.0 
+DECAY  15 0.000000e+00 # ta- : 0.0 
+DECAY  16 0.000000e+00 # vt : 0.0 
+DECAY  21 0.000000e+00 # g : 0.0 
+DECAY  22 0.000000e+00 # a : 0.0 
+#===========================================================
+# QUANTUM NUMBERS OF NEW STATE(S) (NON SM PDG CODE)
+#===========================================================
+
+Block QNUMBERS 82  # gh 
+        1 0  # 3 times electric charge
+        2 1  # number of spin states (2S+1)
+        3 8  # colour rep (1: singlet, 3: triplet, 8: octet)
+        4 1  # Particle/Antiparticle distinction (0=own anti)
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_0_kt_1p2/proc_card_mg5.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_0_kt_1p2/proc_card_mg5.dat
new file mode 100644
index 00000000000..db7d2dc28a4
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_0_kt_1p2/proc_card_mg5.dat
@@ -0,0 +1,42 @@
+#************************************************************
+#*                     MadGraph5_aMC@NLO                    *
+#*                                                          *
+#*                *                       *                 *
+#*                  *        * *        *                   *
+#*                    * * * * 5 * * * *                     *
+#*                  *        * *        *                   *
+#*                *                       *                 *
+#*                                                          *
+#*                                                          *
+#*         VERSION 2.9.18                2023-12-08         *
+#*                                                          *
+#*    The MadGraph5_aMC@NLO Development Team - Find us at   *
+#*    https://server06.fynu.ucl.ac.be/projects/madgraph     *
+#*                                                          *
+#************************************************************
+#*                                                          *
+#*               Command File for MadGraph5_aMC@NLO         *
+#*                                                          *
+#*     run as ./bin/mg5_aMC  filename                       *
+#*                                                          *
+#************************************************************
+set low_mem_multicore_nlo_generation False
+set gauge unitary
+set loop_color_flows False
+set max_npoint_for_channel 0
+set default_unset_couplings 99
+set max_t_for_channel 99
+set zerowidth_tchannel True
+set group_subprocesses Auto
+set ignore_six_quark_processes False
+set loop_optimized_output True
+set complex_mass_scheme False
+import model loop_sm_c3d4
+define p = g u c d s u~ c~ d~ s~
+define j = g u c d s u~ c~ d~ s~
+define l+ = e+ mu+
+define l- = e- mu-
+define vl = ve vm vt
+define vl~ = ve~ vm~ vt~
+generate p p > h h h [QCD]
+output GF_HHH_c3_0_d4_0 -nojpeg
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_0_kt_1p2/reweight_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_0_kt_1p2/reweight_card.dat
new file mode 100644
index 00000000000..c0529342fbc
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_0_kt_1p2/reweight_card.dat
@@ -0,0 +1,2 @@
+#*************************************************************************
+change rwgt_dir rwgt
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_0_kt_1p2/run_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_0_kt_1p2/run_card.dat
new file mode 100644
index 00000000000..869f39f5de7
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_0_kt_1p2/run_card.dat
@@ -0,0 +1,267 @@
+#*********************************************************************
+#                       MadGraph5_aMC@NLO                            *
+#                                                                    *
+#                     run_card.dat MadEvent                          *
+#                                                                    *
+#  This file is used to set the parameters of the run.               *
+#                                                                    *
+#  Some notation/conventions:                                        *
+#                                                                    *
+#   Lines starting with a '# ' are info or comments                  *
+#                                                                    *
+#   mind the format:   value    = variable     ! comment             *
+#                                                                    *
+#   To display more options, you can type the command:               *
+#      update to_full                                                *
+#*********************************************************************
+#                                                                    
+#*********************************************************************
+# Tag name for the run (one word)                                    *
+#*********************************************************************
+  tag_1	= run_tag ! name of the run 
+#*********************************************************************
+# Number of events and rnd seed                                      *
+# Warning: Do not generate more than 1M events in a single run       *
+#*********************************************************************
+  100000	= nevents ! Number of unweighted events requested 
+  0	= iseed ! rnd seed (0=assigned automatically=default))
+#*********************************************************************
+# Collider type and energy                                           *
+# lpp: 0=No PDF, 1=proton, -1=antiproton, 2=photon from proton,      *
+#                3=photon from electron, 4=photon from muon          *
+#*********************************************************************
+  1	= lpp1 ! beam 1 type 
+  1	= lpp2 ! beam 2 type
+  6800.0	= ebeam1 ! beam 1 total energy in GeV
+  6800.0	= ebeam2 ! beam 2 total energy in GeV
+
+#*********************************************************************
+# Beam polarization from -100 (left-handed) to 100 (right-handed)    *
+#*********************************************************************
+     0.0     = polbeam1 ! beam polarization for beam 1
+     0.0     = polbeam2 ! beam polarization for beam 2
+
+
+#*********************************************************************
+# PDF CHOICE: this automatically fixes also alpha_s and its evol.    *
+#*********************************************************************
+  lhapdf	= pdlabel ! PDF set                                     
+  325500	= lhaid ! if pdlabel=lhapdf, this is the lhapdf number
+# To see heavy ion options: type "update ion_pdf"
+#*********************************************************************
+# Renormalization and factorization scales                           *
+#*********************************************************************
+  False	= fixed_ren_scale ! if .true. use fixed ren scale
+  False	= fixed_fac_scale ! if .true. use fixed fac scale
+  91.188	= scale ! fixed ren scale
+  91.188	= dsqrt_q2fact1 ! fixed fact scale for pdf1
+  91.188	= dsqrt_q2fact2 ! fixed fact scale for pdf2
+  -1	= dynamical_scale_choice ! Choose one of the preselected dynamical choices
+  1.0	= scalefact ! scale factor for event-by-event scales
+#*********************************************************************
+# Type and output format
+#*********************************************************************
+  True	= gridpack !True = setting up the grid pack
+  -1.0	= time_of_flight ! threshold (in mm) below which the invariant livetime is not written (-1 means not written)
+  sum	= event_norm ! average/sum. Normalization of the weight in the LHEF
+
+#*********************************************************************
+# Matching parameter (MLM only)
+#*********************************************************************
+ 0 = ickkw            ! 0 no matching, 1 MLM
+ 1.0 = alpsfact         ! scale factor for QCD emission vx
+ False = chcluster        ! cluster only according to channel diag
+ 4 = asrwgtflavor     ! highest quark flavor for a_s reweight
+ True  = auto_ptj_mjj  ! Automatic setting of ptj and mjj if xqcut >0
+                                   ! (turn off for VBF and single top processes)
+ 0.0   = xqcut   ! minimum kt jet measure between partons
+
+
+#*********************************************************************
+#
+#*********************************************************************
+# Phase-Space Optimization strategy (basic options)
+#*********************************************************************
+  0	= nhel ! using helicities importance sampling or not.
+                             ! 0: sum over helicity, 1: importance sampling
+  2	= sde_strategy ! default integration strategy (hep-ph/2021.00773)
+                             ! 1 is old strategy (using amp square)
+			     ! 2 is new strategy (using only the denominator)
+# To see advanced option for Phase-Space optimization: type "update psoptim"			     
+#*********************************************************************
+# Generation bias, check the wiki page below for more information:   *
+#  'cp3.irmp.ucl.ac.be/projects/madgraph/wiki/LOEventGenerationBias' *
+#*********************************************************************
+  None	= bias_module ! Bias type of bias, [None, ptj_bias, -custom_folder-]
+  {}	= bias_parameters ! Specifies the parameters of the module.
+#
+#*******************************                                                 
+# Parton level cuts definition *
+#*******************************                                     
+#                                                                    
+#
+#*********************************************************************
+# BW cutoff (M+/-bwcutoff*Gamma) ! Define on/off-shell for "$" and decay  
+#*********************************************************************
+  15.0	= bwcutoff ! (M+/-bwcutoff*Gamma)
+#*********************************************************************
+# Standard Cuts                                                      *
+#*********************************************************************
+# Minimum and maximum pt's (for max, -1 means no cut)                *
+#*********************************************************************
+  {}	= pt_min_pdg ! pt cut for other particles (use pdg code). Applied on particle and anti-particle
+  {}	= pt_max_pdg ! pt cut for other particles (syntax e.g. {6: 100, 25: 50}) 
+
+#*********************************************************************
+# Minimum and maximum E's (in the center of mass frame)              *
+#*********************************************************************
+  0.0  = ej     ! minimum E for the jets
+  0.0  = eb     ! minimum E for the b
+  0.0  = ea     ! minimum E for the photons
+  0.0  = el     ! minimum E for the charged leptons
+  -1.0   = ejmax ! maximum E for the jets
+ -1.0   = ebmax ! maximum E for the b
+ -1.0   = eamax ! maximum E for the photons
+ -1.0   = elmax ! maximum E for the charged leptons
+ {} = e_min_pdg ! E cut for other particles (use pdg code). Applied on particle and anti-particle
+ {} = e_max_pdg ! E cut for other particles (syntax e.g. {6: 100, 25: 50})
+
+#*********************************************************************
+# Maximum and minimum absolute rapidity (for max, -1 means no cut)   *
+#*********************************************************************
+  {}	= eta_min_pdg ! rap cut for other particles (use pdg code). Applied on particle and anti-particle
+  {}	= eta_max_pdg ! rap cut for other particles (syntax e.g. {6: 2.5, 23: 5})
+#*********************************************************************
+# Minimum and maximum DeltaR distance                                *
+#*********************************************************************
+#*********************************************************************
+# Minimum and maximum invariant mass for pairs                       *
+#*********************************************************************
+  {}	= mxx_min_pdg ! min invariant mass of a pair of particles X/X~ (e.g. {6:250})
+  {'default': False}	= mxx_only_part_antipart ! if True the invariant mass is applied only 
+                       ! to pairs of particle/antiparticle and not to pairs of the same pdg codes.  
+#*********************************************************************
+# Inclusive cuts                                                     *
+#*********************************************************************
+  0.0	= ptheavy ! minimum pt for at least one heavy final state
+#*********************************************************************
+# maximal pdg code for quark to be considered as a light jet         *
+# (otherwise b cuts are applied)                                     *
+#*********************************************************************
+  4	= maxjetflavor ! Maximum jet pdg code
+#*********************************************************************
+#
+#*********************************************************************
+# Store info for systematics studies                                 *
+# WARNING: Do not use for interference type of computation           *
+#*********************************************************************
+  True	= use_syst ! Enable systematics studies
+#
+  None	= systematics_program ! none, systematics [python], SysCalc [depreceted, C++]
+  ['--mur=0.5,1,2', '--muf=0.5,1,2', '--pdf=errorset']	= systematics_arguments ! see: https://cp3.irmp.ucl.ac.be/projects/madgraph/wiki/Systematics#Systematicspythonmodule
+# Syscalc is deprecated but to see the associate options type'update syscalc'
+#***********************************************************************
+# Turn on either the ktdurham or ptlund cut to activate                *
+# CKKW(L) merging with Pythia8 [arXiv:1410.3012, arXiv:1109.4829]      *
+#***********************************************************************
+ -1.0  =  ktdurham
+ 0.4   =  dparameter
+ -1.0  =  ptlund
+ 21, 1, 2, 3, 4, 5, 6  =  pdgs_for_merging_cut ! PDGs for two cuts above
+#********************************************************************* 
+#  Additional hidden parameters
+#*********************************************************************
+  1	= ktscheme # hidden_parameter
+  0.4	= draa # hidden_parameter
+  -1.0	= ptamax # hidden_parameter
+  2.5	= etal # hidden_parameter
+  0.0	= ht4min # hidden_parameter
+  0.0	= ptl4min # hidden_parameter
+  True	= isoem # hidden_parameter
+  -1.0	= mmbbmax # hidden_parameter
+  0.0	= ptj4min # hidden_parameter
+  0.4	= dral # hidden_parameter
+  -1.0	= drajmax # hidden_parameter
+  -1.0	= drabmax # hidden_parameter
+  0.0	= misset # hidden_parameter
+  0.4	= draj # hidden_parameter
+  -1.0	= ptj3max # hidden_parameter
+  -1.0	= ptl4max # hidden_parameter
+  -1.0	= drblmax # hidden_parameter
+  -1.0	= drjlmax # hidden_parameter
+  0.0	= xptb # hidden_parameter
+  -1.0	= drllmax # hidden_parameter
+  0.0	= drab # hidden_parameter
+  0.0	= ht2min # hidden_parameter
+  0.0	= ptj1min # hidden_parameter
+  0.0	= etalmin # hidden_parameter
+  0.0	= mmbb # hidden_parameter
+  -1.0	= ptj4max # hidden_parameter
+  -1.0	= ptllmax # hidden_parameter
+  1.0	= ptl # hidden_parameter
+  0.0	= ptl1min # hidden_parameter
+  2.0	= ptj # hidden_parameter
+  -1.0	= mmllmax # hidden_parameter
+  0	= cutuse # hidden_parameter
+  0.0	= xptj # hidden_parameter
+  0.0	= drbl # hidden_parameter
+  1.0	= pta # hidden_parameter
+  0.0	= ptj3min # hidden_parameter
+  10.0	= etaj # hidden_parameter
+  0.0	= ptllmin # hidden_parameter
+  -1.0	= ptl2max # hidden_parameter
+  -1.0	= etab # hidden_parameter
+  0.4	= drjl # hidden_parameter
+  -1.0	= ptbmax # hidden_parameter
+  0.0	= ptj2min # hidden_parameter
+  -1.0	= ptl3max # hidden_parameter
+  -1.0	= ptj1max # hidden_parameter
+  -1.0	= dralmax # hidden_parameter
+  -1.0	= mmaamax # hidden_parameter
+  -1.0	= ptlmax # hidden_parameter
+  -1.0	= missetmax # hidden_parameter
+  0.0	= xptl # hidden_parameter
+  -1.0	= ptl1max # hidden_parameter
+  0.4	= r0gamma # hidden_parameter
+  0.0	= drbj # hidden_parameter
+  True	= clusinfo # hidden_parameter
+  1.0	= xn # hidden_parameter
+  -1.0	= drbjmax # hidden_parameter
+  True	= pdfwgt # hidden_parameter
+  2.5	= etaa # hidden_parameter
+  -1.0	= ptjmax # hidden_parameter
+  0.4	= drll # hidden_parameter
+  -1.0	= mmnlmax # hidden_parameter
+  -1.0	= ihtmax # hidden_parameter
+  -1.0	= htjmax # hidden_parameter
+  -1.0	= ptj2max # hidden_parameter
+  0.0	= ptb # hidden_parameter
+  0.0	= ptl2min # hidden_parameter
+  0.0	= ptl3min # hidden_parameter
+  -1.0	= ht3max # hidden_parameter
+  1	= highestmult # hidden_parameter
+  -1.0	= mmjjmax # hidden_parameter
+  -1.0	= ht2max # hidden_parameter
+  3.0	= lhe_version # hidden_parameter
+  0.0	= drbb # hidden_parameter
+  0.0	= htjmin # hidden_parameter
+  -1.0	= draamax # hidden_parameter
+  0.0	= etaamin # hidden_parameter
+  0.0	= xetamin # hidden_parameter
+  0.4	= drjj # hidden_parameter
+  0.0	= deltaeta # hidden_parameter
+  -1.0	= ht4max # hidden_parameter
+  0.0	= mmjj # hidden_parameter
+  0.0	= ptgmin # hidden_parameter
+  0.0	= ihtmin # hidden_parameter
+  0.0	= etabmin # hidden_parameter
+  0.0	= mmnl # hidden_parameter
+  -1.0	= drjjmax # hidden_parameter
+  False	= cut_decays # hidden_parameter
+  0.0	= mmll # hidden_parameter
+  -1.0	= drbbmax # hidden_parameter
+  0.0	= mmaa # hidden_parameter
+  0.0	= etajmin # hidden_parameter
+  0.0	= ht3min # hidden_parameter
+  1.0	= epsgamma # hidden_parameter
+  0.0	= xpta # hidden_parameter
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_200/param_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_200/param_card.dat
new file mode 100644
index 00000000000..6c5a45edf71
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_200/param_card.dat
@@ -0,0 +1,99 @@
+######################################################################
+## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL   ####
+######################################################################
+##                                                                  ##
+##  Width set on Auto will be computed following the information    ##
+##        present in the decay.py files of the model.               ##
+##        See  arXiv:1402.1178 for more details.                    ##
+##                                                                  ##
+######################################################################
+
+###################################
+## INFORMATION FOR MASS
+###################################
+Block mass 
+    5 4.700000e+00 # MB 
+    6 1.730000e+02 # MT 
+   15 1.777000e+00 # MTA 
+   23 9.118800e+01 # MZ 
+   25 1.250000e+02 # MH 
+## Dependent parameters, given by model restrictions.
+## Those values should be edited following the 
+## analytical expression. MG5 ignores those values 
+## but they are important for interfacing the output of MG5
+## to external program such as Pythia.
+  1 0.000000e+00 # d : 0.0 
+  2 0.000000e+00 # u : 0.0 
+  3 0.000000e+00 # s : 0.0 
+  4 0.000000e+00 # c : 0.0 
+  11 0.000000e+00 # e- : 0.0 
+  12 0.000000e+00 # ve : 0.0 
+  13 0.000000e+00 # mu- : 0.0 
+  14 0.000000e+00 # vm : 0.0 
+  16 0.000000e+00 # vt : 0.0 
+  21 0.000000e+00 # g : 0.0 
+  22 0.000000e+00 # a : 0.0 
+  24 8.041900e+01 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4. - (aEW*cmath.pi*MZ__exp__2)/(Gf*sqrt__2))) 
+
+###################################
+## INFORMATION FOR QUARTCOUP
+###################################
+Block quartcoup 
+    6 200.000000e+00 # d4 
+
+###################################
+## INFORMATION FOR SMINPUTS
+###################################
+Block sminputs 
+    1 1.325070e+02 # aEWM1 
+    2 1.166390e-05 # Gf 
+    3 1.180000e-01 # aS (Note that Parameter not used if you use a PDF set) 
+
+###################################
+## INFORMATION FOR TRIPCOUP
+###################################
+Block tripcoup 
+    4 0.000000e+00 # c3 
+
+###################################
+## INFORMATION FOR YUKAWA
+###################################
+Block yukawa 
+    5 4.700000e+00 # ymb 
+    6 1.730000e+02 # ymt 
+   15 1.777000e+00 # ymtau 
+
+###################################
+## INFORMATION FOR DECAY
+###################################
+DECAY   6 1.491500e+00 # WT 
+DECAY  23 2.441404e+00 # WZ 
+DECAY  24 2.047600e+00 # WW 
+DECAY  25 6.382339e-03 # WH 
+## Dependent parameters, given by model restrictions.
+## Those values should be edited following the 
+## analytical expression. MG5 ignores those values 
+## but they are important for interfacing the output of MG5
+## to external program such as Pythia.
+DECAY  1 0.000000e+00 # d : 0.0 
+DECAY  2 0.000000e+00 # u : 0.0 
+DECAY  3 0.000000e+00 # s : 0.0 
+DECAY  4 0.000000e+00 # c : 0.0 
+DECAY  5 0.000000e+00 # b : 0.0 
+DECAY  11 0.000000e+00 # e- : 0.0 
+DECAY  12 0.000000e+00 # ve : 0.0 
+DECAY  13 0.000000e+00 # mu- : 0.0 
+DECAY  14 0.000000e+00 # vm : 0.0 
+DECAY  15 0.000000e+00 # ta- : 0.0 
+DECAY  16 0.000000e+00 # vt : 0.0 
+DECAY  21 0.000000e+00 # g : 0.0 
+DECAY  22 0.000000e+00 # a : 0.0 
+#===========================================================
+# QUANTUM NUMBERS OF NEW STATE(S) (NON SM PDG CODE)
+#===========================================================
+
+Block QNUMBERS 82  # gh 
+        1 0  # 3 times electric charge
+        2 1  # number of spin states (2S+1)
+        3 8  # colour rep (1: singlet, 3: triplet, 8: octet)
+        4 1  # Particle/Antiparticle distinction (0=own anti)
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_200/proc_card_mg5.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_200/proc_card_mg5.dat
new file mode 100644
index 00000000000..db7d2dc28a4
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_200/proc_card_mg5.dat
@@ -0,0 +1,42 @@
+#************************************************************
+#*                     MadGraph5_aMC@NLO                    *
+#*                                                          *
+#*                *                       *                 *
+#*                  *        * *        *                   *
+#*                    * * * * 5 * * * *                     *
+#*                  *        * *        *                   *
+#*                *                       *                 *
+#*                                                          *
+#*                                                          *
+#*         VERSION 2.9.18                2023-12-08         *
+#*                                                          *
+#*    The MadGraph5_aMC@NLO Development Team - Find us at   *
+#*    https://server06.fynu.ucl.ac.be/projects/madgraph     *
+#*                                                          *
+#************************************************************
+#*                                                          *
+#*               Command File for MadGraph5_aMC@NLO         *
+#*                                                          *
+#*     run as ./bin/mg5_aMC  filename                       *
+#*                                                          *
+#************************************************************
+set low_mem_multicore_nlo_generation False
+set gauge unitary
+set loop_color_flows False
+set max_npoint_for_channel 0
+set default_unset_couplings 99
+set max_t_for_channel 99
+set zerowidth_tchannel True
+set group_subprocesses Auto
+set ignore_six_quark_processes False
+set loop_optimized_output True
+set complex_mass_scheme False
+import model loop_sm_c3d4
+define p = g u c d s u~ c~ d~ s~
+define j = g u c d s u~ c~ d~ s~
+define l+ = e+ mu+
+define l- = e- mu-
+define vl = ve vm vt
+define vl~ = ve~ vm~ vt~
+generate p p > h h h [QCD]
+output GF_HHH_c3_0_d4_0 -nojpeg
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_200/reweight_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_200/reweight_card.dat
new file mode 100644
index 00000000000..c0529342fbc
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_200/reweight_card.dat
@@ -0,0 +1,2 @@
+#*************************************************************************
+change rwgt_dir rwgt
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_200/run_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_200/run_card.dat
new file mode 100644
index 00000000000..869f39f5de7
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_200/run_card.dat
@@ -0,0 +1,267 @@
+#*********************************************************************
+#                       MadGraph5_aMC@NLO                            *
+#                                                                    *
+#                     run_card.dat MadEvent                          *
+#                                                                    *
+#  This file is used to set the parameters of the run.               *
+#                                                                    *
+#  Some notation/conventions:                                        *
+#                                                                    *
+#   Lines starting with a '# ' are info or comments                  *
+#                                                                    *
+#   mind the format:   value    = variable     ! comment             *
+#                                                                    *
+#   To display more options, you can type the command:               *
+#      update to_full                                                *
+#*********************************************************************
+#                                                                    
+#*********************************************************************
+# Tag name for the run (one word)                                    *
+#*********************************************************************
+  tag_1	= run_tag ! name of the run 
+#*********************************************************************
+# Number of events and rnd seed                                      *
+# Warning: Do not generate more than 1M events in a single run       *
+#*********************************************************************
+  100000	= nevents ! Number of unweighted events requested 
+  0	= iseed ! rnd seed (0=assigned automatically=default))
+#*********************************************************************
+# Collider type and energy                                           *
+# lpp: 0=No PDF, 1=proton, -1=antiproton, 2=photon from proton,      *
+#                3=photon from electron, 4=photon from muon          *
+#*********************************************************************
+  1	= lpp1 ! beam 1 type 
+  1	= lpp2 ! beam 2 type
+  6800.0	= ebeam1 ! beam 1 total energy in GeV
+  6800.0	= ebeam2 ! beam 2 total energy in GeV
+
+#*********************************************************************
+# Beam polarization from -100 (left-handed) to 100 (right-handed)    *
+#*********************************************************************
+     0.0     = polbeam1 ! beam polarization for beam 1
+     0.0     = polbeam2 ! beam polarization for beam 2
+
+
+#*********************************************************************
+# PDF CHOICE: this automatically fixes also alpha_s and its evol.    *
+#*********************************************************************
+  lhapdf	= pdlabel ! PDF set                                     
+  325500	= lhaid ! if pdlabel=lhapdf, this is the lhapdf number
+# To see heavy ion options: type "update ion_pdf"
+#*********************************************************************
+# Renormalization and factorization scales                           *
+#*********************************************************************
+  False	= fixed_ren_scale ! if .true. use fixed ren scale
+  False	= fixed_fac_scale ! if .true. use fixed fac scale
+  91.188	= scale ! fixed ren scale
+  91.188	= dsqrt_q2fact1 ! fixed fact scale for pdf1
+  91.188	= dsqrt_q2fact2 ! fixed fact scale for pdf2
+  -1	= dynamical_scale_choice ! Choose one of the preselected dynamical choices
+  1.0	= scalefact ! scale factor for event-by-event scales
+#*********************************************************************
+# Type and output format
+#*********************************************************************
+  True	= gridpack !True = setting up the grid pack
+  -1.0	= time_of_flight ! threshold (in mm) below which the invariant livetime is not written (-1 means not written)
+  sum	= event_norm ! average/sum. Normalization of the weight in the LHEF
+
+#*********************************************************************
+# Matching parameter (MLM only)
+#*********************************************************************
+ 0 = ickkw            ! 0 no matching, 1 MLM
+ 1.0 = alpsfact         ! scale factor for QCD emission vx
+ False = chcluster        ! cluster only according to channel diag
+ 4 = asrwgtflavor     ! highest quark flavor for a_s reweight
+ True  = auto_ptj_mjj  ! Automatic setting of ptj and mjj if xqcut >0
+                                   ! (turn off for VBF and single top processes)
+ 0.0   = xqcut   ! minimum kt jet measure between partons
+
+
+#*********************************************************************
+#
+#*********************************************************************
+# Phase-Space Optimization strategy (basic options)
+#*********************************************************************
+  0	= nhel ! using helicities importance sampling or not.
+                             ! 0: sum over helicity, 1: importance sampling
+  2	= sde_strategy ! default integration strategy (hep-ph/2021.00773)
+                             ! 1 is old strategy (using amp square)
+			     ! 2 is new strategy (using only the denominator)
+# To see advanced option for Phase-Space optimization: type "update psoptim"			     
+#*********************************************************************
+# Generation bias, check the wiki page below for more information:   *
+#  'cp3.irmp.ucl.ac.be/projects/madgraph/wiki/LOEventGenerationBias' *
+#*********************************************************************
+  None	= bias_module ! Bias type of bias, [None, ptj_bias, -custom_folder-]
+  {}	= bias_parameters ! Specifies the parameters of the module.
+#
+#*******************************                                                 
+# Parton level cuts definition *
+#*******************************                                     
+#                                                                    
+#
+#*********************************************************************
+# BW cutoff (M+/-bwcutoff*Gamma) ! Define on/off-shell for "$" and decay  
+#*********************************************************************
+  15.0	= bwcutoff ! (M+/-bwcutoff*Gamma)
+#*********************************************************************
+# Standard Cuts                                                      *
+#*********************************************************************
+# Minimum and maximum pt's (for max, -1 means no cut)                *
+#*********************************************************************
+  {}	= pt_min_pdg ! pt cut for other particles (use pdg code). Applied on particle and anti-particle
+  {}	= pt_max_pdg ! pt cut for other particles (syntax e.g. {6: 100, 25: 50}) 
+
+#*********************************************************************
+# Minimum and maximum E's (in the center of mass frame)              *
+#*********************************************************************
+  0.0  = ej     ! minimum E for the jets
+  0.0  = eb     ! minimum E for the b
+  0.0  = ea     ! minimum E for the photons
+  0.0  = el     ! minimum E for the charged leptons
+  -1.0   = ejmax ! maximum E for the jets
+ -1.0   = ebmax ! maximum E for the b
+ -1.0   = eamax ! maximum E for the photons
+ -1.0   = elmax ! maximum E for the charged leptons
+ {} = e_min_pdg ! E cut for other particles (use pdg code). Applied on particle and anti-particle
+ {} = e_max_pdg ! E cut for other particles (syntax e.g. {6: 100, 25: 50})
+
+#*********************************************************************
+# Maximum and minimum absolute rapidity (for max, -1 means no cut)   *
+#*********************************************************************
+  {}	= eta_min_pdg ! rap cut for other particles (use pdg code). Applied on particle and anti-particle
+  {}	= eta_max_pdg ! rap cut for other particles (syntax e.g. {6: 2.5, 23: 5})
+#*********************************************************************
+# Minimum and maximum DeltaR distance                                *
+#*********************************************************************
+#*********************************************************************
+# Minimum and maximum invariant mass for pairs                       *
+#*********************************************************************
+  {}	= mxx_min_pdg ! min invariant mass of a pair of particles X/X~ (e.g. {6:250})
+  {'default': False}	= mxx_only_part_antipart ! if True the invariant mass is applied only 
+                       ! to pairs of particle/antiparticle and not to pairs of the same pdg codes.  
+#*********************************************************************
+# Inclusive cuts                                                     *
+#*********************************************************************
+  0.0	= ptheavy ! minimum pt for at least one heavy final state
+#*********************************************************************
+# maximal pdg code for quark to be considered as a light jet         *
+# (otherwise b cuts are applied)                                     *
+#*********************************************************************
+  4	= maxjetflavor ! Maximum jet pdg code
+#*********************************************************************
+#
+#*********************************************************************
+# Store info for systematics studies                                 *
+# WARNING: Do not use for interference type of computation           *
+#*********************************************************************
+  True	= use_syst ! Enable systematics studies
+#
+  None	= systematics_program ! none, systematics [python], SysCalc [depreceted, C++]
+  ['--mur=0.5,1,2', '--muf=0.5,1,2', '--pdf=errorset']	= systematics_arguments ! see: https://cp3.irmp.ucl.ac.be/projects/madgraph/wiki/Systematics#Systematicspythonmodule
+# Syscalc is deprecated but to see the associate options type'update syscalc'
+#***********************************************************************
+# Turn on either the ktdurham or ptlund cut to activate                *
+# CKKW(L) merging with Pythia8 [arXiv:1410.3012, arXiv:1109.4829]      *
+#***********************************************************************
+ -1.0  =  ktdurham
+ 0.4   =  dparameter
+ -1.0  =  ptlund
+ 21, 1, 2, 3, 4, 5, 6  =  pdgs_for_merging_cut ! PDGs for two cuts above
+#********************************************************************* 
+#  Additional hidden parameters
+#*********************************************************************
+  1	= ktscheme # hidden_parameter
+  0.4	= draa # hidden_parameter
+  -1.0	= ptamax # hidden_parameter
+  2.5	= etal # hidden_parameter
+  0.0	= ht4min # hidden_parameter
+  0.0	= ptl4min # hidden_parameter
+  True	= isoem # hidden_parameter
+  -1.0	= mmbbmax # hidden_parameter
+  0.0	= ptj4min # hidden_parameter
+  0.4	= dral # hidden_parameter
+  -1.0	= drajmax # hidden_parameter
+  -1.0	= drabmax # hidden_parameter
+  0.0	= misset # hidden_parameter
+  0.4	= draj # hidden_parameter
+  -1.0	= ptj3max # hidden_parameter
+  -1.0	= ptl4max # hidden_parameter
+  -1.0	= drblmax # hidden_parameter
+  -1.0	= drjlmax # hidden_parameter
+  0.0	= xptb # hidden_parameter
+  -1.0	= drllmax # hidden_parameter
+  0.0	= drab # hidden_parameter
+  0.0	= ht2min # hidden_parameter
+  0.0	= ptj1min # hidden_parameter
+  0.0	= etalmin # hidden_parameter
+  0.0	= mmbb # hidden_parameter
+  -1.0	= ptj4max # hidden_parameter
+  -1.0	= ptllmax # hidden_parameter
+  1.0	= ptl # hidden_parameter
+  0.0	= ptl1min # hidden_parameter
+  2.0	= ptj # hidden_parameter
+  -1.0	= mmllmax # hidden_parameter
+  0	= cutuse # hidden_parameter
+  0.0	= xptj # hidden_parameter
+  0.0	= drbl # hidden_parameter
+  1.0	= pta # hidden_parameter
+  0.0	= ptj3min # hidden_parameter
+  10.0	= etaj # hidden_parameter
+  0.0	= ptllmin # hidden_parameter
+  -1.0	= ptl2max # hidden_parameter
+  -1.0	= etab # hidden_parameter
+  0.4	= drjl # hidden_parameter
+  -1.0	= ptbmax # hidden_parameter
+  0.0	= ptj2min # hidden_parameter
+  -1.0	= ptl3max # hidden_parameter
+  -1.0	= ptj1max # hidden_parameter
+  -1.0	= dralmax # hidden_parameter
+  -1.0	= mmaamax # hidden_parameter
+  -1.0	= ptlmax # hidden_parameter
+  -1.0	= missetmax # hidden_parameter
+  0.0	= xptl # hidden_parameter
+  -1.0	= ptl1max # hidden_parameter
+  0.4	= r0gamma # hidden_parameter
+  0.0	= drbj # hidden_parameter
+  True	= clusinfo # hidden_parameter
+  1.0	= xn # hidden_parameter
+  -1.0	= drbjmax # hidden_parameter
+  True	= pdfwgt # hidden_parameter
+  2.5	= etaa # hidden_parameter
+  -1.0	= ptjmax # hidden_parameter
+  0.4	= drll # hidden_parameter
+  -1.0	= mmnlmax # hidden_parameter
+  -1.0	= ihtmax # hidden_parameter
+  -1.0	= htjmax # hidden_parameter
+  -1.0	= ptj2max # hidden_parameter
+  0.0	= ptb # hidden_parameter
+  0.0	= ptl2min # hidden_parameter
+  0.0	= ptl3min # hidden_parameter
+  -1.0	= ht3max # hidden_parameter
+  1	= highestmult # hidden_parameter
+  -1.0	= mmjjmax # hidden_parameter
+  -1.0	= ht2max # hidden_parameter
+  3.0	= lhe_version # hidden_parameter
+  0.0	= drbb # hidden_parameter
+  0.0	= htjmin # hidden_parameter
+  -1.0	= draamax # hidden_parameter
+  0.0	= etaamin # hidden_parameter
+  0.0	= xetamin # hidden_parameter
+  0.4	= drjj # hidden_parameter
+  0.0	= deltaeta # hidden_parameter
+  -1.0	= ht4max # hidden_parameter
+  0.0	= mmjj # hidden_parameter
+  0.0	= ptgmin # hidden_parameter
+  0.0	= ihtmin # hidden_parameter
+  0.0	= etabmin # hidden_parameter
+  0.0	= mmnl # hidden_parameter
+  -1.0	= drjjmax # hidden_parameter
+  False	= cut_decays # hidden_parameter
+  0.0	= mmll # hidden_parameter
+  -1.0	= drbbmax # hidden_parameter
+  0.0	= mmaa # hidden_parameter
+  0.0	= etajmin # hidden_parameter
+  0.0	= ht3min # hidden_parameter
+  1.0	= epsgamma # hidden_parameter
+  0.0	= xpta # hidden_parameter
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_m200/param_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_m200/param_card.dat
new file mode 100644
index 00000000000..ad106f07815
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_m200/param_card.dat
@@ -0,0 +1,99 @@
+######################################################################
+## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL   ####
+######################################################################
+##                                                                  ##
+##  Width set on Auto will be computed following the information    ##
+##        present in the decay.py files of the model.               ##
+##        See  arXiv:1402.1178 for more details.                    ##
+##                                                                  ##
+######################################################################
+
+###################################
+## INFORMATION FOR MASS
+###################################
+Block mass 
+    5 4.700000e+00 # MB 
+    6 1.730000e+02 # MT 
+   15 1.777000e+00 # MTA 
+   23 9.118800e+01 # MZ 
+   25 1.250000e+02 # MH 
+## Dependent parameters, given by model restrictions.
+## Those values should be edited following the 
+## analytical expression. MG5 ignores those values 
+## but they are important for interfacing the output of MG5
+## to external program such as Pythia.
+  1 0.000000e+00 # d : 0.0 
+  2 0.000000e+00 # u : 0.0 
+  3 0.000000e+00 # s : 0.0 
+  4 0.000000e+00 # c : 0.0 
+  11 0.000000e+00 # e- : 0.0 
+  12 0.000000e+00 # ve : 0.0 
+  13 0.000000e+00 # mu- : 0.0 
+  14 0.000000e+00 # vm : 0.0 
+  16 0.000000e+00 # vt : 0.0 
+  21 0.000000e+00 # g : 0.0 
+  22 0.000000e+00 # a : 0.0 
+  24 8.041900e+01 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4. - (aEW*cmath.pi*MZ__exp__2)/(Gf*sqrt__2))) 
+
+###################################
+## INFORMATION FOR QUARTCOUP
+###################################
+Block quartcoup 
+    6 -200.000000e+00 # d4 
+
+###################################
+## INFORMATION FOR SMINPUTS
+###################################
+Block sminputs 
+    1 1.325070e+02 # aEWM1 
+    2 1.166390e-05 # Gf 
+    3 1.180000e-01 # aS (Note that Parameter not used if you use a PDF set) 
+
+###################################
+## INFORMATION FOR TRIPCOUP
+###################################
+Block tripcoup 
+    4 0.000000e+00 # c3 
+
+###################################
+## INFORMATION FOR YUKAWA
+###################################
+Block yukawa 
+    5 4.700000e+00 # ymb 
+    6 1.730000e+02 # ymt 
+   15 1.777000e+00 # ymtau 
+
+###################################
+## INFORMATION FOR DECAY
+###################################
+DECAY   6 1.491500e+00 # WT 
+DECAY  23 2.441404e+00 # WZ 
+DECAY  24 2.047600e+00 # WW 
+DECAY  25 6.382339e-03 # WH 
+## Dependent parameters, given by model restrictions.
+## Those values should be edited following the 
+## analytical expression. MG5 ignores those values 
+## but they are important for interfacing the output of MG5
+## to external program such as Pythia.
+DECAY  1 0.000000e+00 # d : 0.0 
+DECAY  2 0.000000e+00 # u : 0.0 
+DECAY  3 0.000000e+00 # s : 0.0 
+DECAY  4 0.000000e+00 # c : 0.0 
+DECAY  5 0.000000e+00 # b : 0.0 
+DECAY  11 0.000000e+00 # e- : 0.0 
+DECAY  12 0.000000e+00 # ve : 0.0 
+DECAY  13 0.000000e+00 # mu- : 0.0 
+DECAY  14 0.000000e+00 # vm : 0.0 
+DECAY  15 0.000000e+00 # ta- : 0.0 
+DECAY  16 0.000000e+00 # vt : 0.0 
+DECAY  21 0.000000e+00 # g : 0.0 
+DECAY  22 0.000000e+00 # a : 0.0 
+#===========================================================
+# QUANTUM NUMBERS OF NEW STATE(S) (NON SM PDG CODE)
+#===========================================================
+
+Block QNUMBERS 82  # gh 
+        1 0  # 3 times electric charge
+        2 1  # number of spin states (2S+1)
+        3 8  # colour rep (1: singlet, 3: triplet, 8: octet)
+        4 1  # Particle/Antiparticle distinction (0=own anti)
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_m200/proc_card_mg5.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_m200/proc_card_mg5.dat
new file mode 100644
index 00000000000..db7d2dc28a4
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_m200/proc_card_mg5.dat
@@ -0,0 +1,42 @@
+#************************************************************
+#*                     MadGraph5_aMC@NLO                    *
+#*                                                          *
+#*                *                       *                 *
+#*                  *        * *        *                   *
+#*                    * * * * 5 * * * *                     *
+#*                  *        * *        *                   *
+#*                *                       *                 *
+#*                                                          *
+#*                                                          *
+#*         VERSION 2.9.18                2023-12-08         *
+#*                                                          *
+#*    The MadGraph5_aMC@NLO Development Team - Find us at   *
+#*    https://server06.fynu.ucl.ac.be/projects/madgraph     *
+#*                                                          *
+#************************************************************
+#*                                                          *
+#*               Command File for MadGraph5_aMC@NLO         *
+#*                                                          *
+#*     run as ./bin/mg5_aMC  filename                       *
+#*                                                          *
+#************************************************************
+set low_mem_multicore_nlo_generation False
+set gauge unitary
+set loop_color_flows False
+set max_npoint_for_channel 0
+set default_unset_couplings 99
+set max_t_for_channel 99
+set zerowidth_tchannel True
+set group_subprocesses Auto
+set ignore_six_quark_processes False
+set loop_optimized_output True
+set complex_mass_scheme False
+import model loop_sm_c3d4
+define p = g u c d s u~ c~ d~ s~
+define j = g u c d s u~ c~ d~ s~
+define l+ = e+ mu+
+define l- = e- mu-
+define vl = ve vm vt
+define vl~ = ve~ vm~ vt~
+generate p p > h h h [QCD]
+output GF_HHH_c3_0_d4_0 -nojpeg
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_m200/reweight_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_m200/reweight_card.dat
new file mode 100644
index 00000000000..c0529342fbc
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_m200/reweight_card.dat
@@ -0,0 +1,2 @@
+#*************************************************************************
+change rwgt_dir rwgt
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_m200/run_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_m200/run_card.dat
new file mode 100644
index 00000000000..869f39f5de7
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_0_d4_m200/run_card.dat
@@ -0,0 +1,267 @@
+#*********************************************************************
+#                       MadGraph5_aMC@NLO                            *
+#                                                                    *
+#                     run_card.dat MadEvent                          *
+#                                                                    *
+#  This file is used to set the parameters of the run.               *
+#                                                                    *
+#  Some notation/conventions:                                        *
+#                                                                    *
+#   Lines starting with a '# ' are info or comments                  *
+#                                                                    *
+#   mind the format:   value    = variable     ! comment             *
+#                                                                    *
+#   To display more options, you can type the command:               *
+#      update to_full                                                *
+#*********************************************************************
+#                                                                    
+#*********************************************************************
+# Tag name for the run (one word)                                    *
+#*********************************************************************
+  tag_1	= run_tag ! name of the run 
+#*********************************************************************
+# Number of events and rnd seed                                      *
+# Warning: Do not generate more than 1M events in a single run       *
+#*********************************************************************
+  100000	= nevents ! Number of unweighted events requested 
+  0	= iseed ! rnd seed (0=assigned automatically=default))
+#*********************************************************************
+# Collider type and energy                                           *
+# lpp: 0=No PDF, 1=proton, -1=antiproton, 2=photon from proton,      *
+#                3=photon from electron, 4=photon from muon          *
+#*********************************************************************
+  1	= lpp1 ! beam 1 type 
+  1	= lpp2 ! beam 2 type
+  6800.0	= ebeam1 ! beam 1 total energy in GeV
+  6800.0	= ebeam2 ! beam 2 total energy in GeV
+
+#*********************************************************************
+# Beam polarization from -100 (left-handed) to 100 (right-handed)    *
+#*********************************************************************
+     0.0     = polbeam1 ! beam polarization for beam 1
+     0.0     = polbeam2 ! beam polarization for beam 2
+
+
+#*********************************************************************
+# PDF CHOICE: this automatically fixes also alpha_s and its evol.    *
+#*********************************************************************
+  lhapdf	= pdlabel ! PDF set                                     
+  325500	= lhaid ! if pdlabel=lhapdf, this is the lhapdf number
+# To see heavy ion options: type "update ion_pdf"
+#*********************************************************************
+# Renormalization and factorization scales                           *
+#*********************************************************************
+  False	= fixed_ren_scale ! if .true. use fixed ren scale
+  False	= fixed_fac_scale ! if .true. use fixed fac scale
+  91.188	= scale ! fixed ren scale
+  91.188	= dsqrt_q2fact1 ! fixed fact scale for pdf1
+  91.188	= dsqrt_q2fact2 ! fixed fact scale for pdf2
+  -1	= dynamical_scale_choice ! Choose one of the preselected dynamical choices
+  1.0	= scalefact ! scale factor for event-by-event scales
+#*********************************************************************
+# Type and output format
+#*********************************************************************
+  True	= gridpack !True = setting up the grid pack
+  -1.0	= time_of_flight ! threshold (in mm) below which the invariant livetime is not written (-1 means not written)
+  sum	= event_norm ! average/sum. Normalization of the weight in the LHEF
+
+#*********************************************************************
+# Matching parameter (MLM only)
+#*********************************************************************
+ 0 = ickkw            ! 0 no matching, 1 MLM
+ 1.0 = alpsfact         ! scale factor for QCD emission vx
+ False = chcluster        ! cluster only according to channel diag
+ 4 = asrwgtflavor     ! highest quark flavor for a_s reweight
+ True  = auto_ptj_mjj  ! Automatic setting of ptj and mjj if xqcut >0
+                                   ! (turn off for VBF and single top processes)
+ 0.0   = xqcut   ! minimum kt jet measure between partons
+
+
+#*********************************************************************
+#
+#*********************************************************************
+# Phase-Space Optimization strategy (basic options)
+#*********************************************************************
+  0	= nhel ! using helicities importance sampling or not.
+                             ! 0: sum over helicity, 1: importance sampling
+  2	= sde_strategy ! default integration strategy (hep-ph/2021.00773)
+                             ! 1 is old strategy (using amp square)
+			     ! 2 is new strategy (using only the denominator)
+# To see advanced option for Phase-Space optimization: type "update psoptim"			     
+#*********************************************************************
+# Generation bias, check the wiki page below for more information:   *
+#  'cp3.irmp.ucl.ac.be/projects/madgraph/wiki/LOEventGenerationBias' *
+#*********************************************************************
+  None	= bias_module ! Bias type of bias, [None, ptj_bias, -custom_folder-]
+  {}	= bias_parameters ! Specifies the parameters of the module.
+#
+#*******************************                                                 
+# Parton level cuts definition *
+#*******************************                                     
+#                                                                    
+#
+#*********************************************************************
+# BW cutoff (M+/-bwcutoff*Gamma) ! Define on/off-shell for "$" and decay  
+#*********************************************************************
+  15.0	= bwcutoff ! (M+/-bwcutoff*Gamma)
+#*********************************************************************
+# Standard Cuts                                                      *
+#*********************************************************************
+# Minimum and maximum pt's (for max, -1 means no cut)                *
+#*********************************************************************
+  {}	= pt_min_pdg ! pt cut for other particles (use pdg code). Applied on particle and anti-particle
+  {}	= pt_max_pdg ! pt cut for other particles (syntax e.g. {6: 100, 25: 50}) 
+
+#*********************************************************************
+# Minimum and maximum E's (in the center of mass frame)              *
+#*********************************************************************
+  0.0  = ej     ! minimum E for the jets
+  0.0  = eb     ! minimum E for the b
+  0.0  = ea     ! minimum E for the photons
+  0.0  = el     ! minimum E for the charged leptons
+  -1.0   = ejmax ! maximum E for the jets
+ -1.0   = ebmax ! maximum E for the b
+ -1.0   = eamax ! maximum E for the photons
+ -1.0   = elmax ! maximum E for the charged leptons
+ {} = e_min_pdg ! E cut for other particles (use pdg code). Applied on particle and anti-particle
+ {} = e_max_pdg ! E cut for other particles (syntax e.g. {6: 100, 25: 50})
+
+#*********************************************************************
+# Maximum and minimum absolute rapidity (for max, -1 means no cut)   *
+#*********************************************************************
+  {}	= eta_min_pdg ! rap cut for other particles (use pdg code). Applied on particle and anti-particle
+  {}	= eta_max_pdg ! rap cut for other particles (syntax e.g. {6: 2.5, 23: 5})
+#*********************************************************************
+# Minimum and maximum DeltaR distance                                *
+#*********************************************************************
+#*********************************************************************
+# Minimum and maximum invariant mass for pairs                       *
+#*********************************************************************
+  {}	= mxx_min_pdg ! min invariant mass of a pair of particles X/X~ (e.g. {6:250})
+  {'default': False}	= mxx_only_part_antipart ! if True the invariant mass is applied only 
+                       ! to pairs of particle/antiparticle and not to pairs of the same pdg codes.  
+#*********************************************************************
+# Inclusive cuts                                                     *
+#*********************************************************************
+  0.0	= ptheavy ! minimum pt for at least one heavy final state
+#*********************************************************************
+# maximal pdg code for quark to be considered as a light jet         *
+# (otherwise b cuts are applied)                                     *
+#*********************************************************************
+  4	= maxjetflavor ! Maximum jet pdg code
+#*********************************************************************
+#
+#*********************************************************************
+# Store info for systematics studies                                 *
+# WARNING: Do not use for interference type of computation           *
+#*********************************************************************
+  True	= use_syst ! Enable systematics studies
+#
+  None	= systematics_program ! none, systematics [python], SysCalc [depreceted, C++]
+  ['--mur=0.5,1,2', '--muf=0.5,1,2', '--pdf=errorset']	= systematics_arguments ! see: https://cp3.irmp.ucl.ac.be/projects/madgraph/wiki/Systematics#Systematicspythonmodule
+# Syscalc is deprecated but to see the associate options type'update syscalc'
+#***********************************************************************
+# Turn on either the ktdurham or ptlund cut to activate                *
+# CKKW(L) merging with Pythia8 [arXiv:1410.3012, arXiv:1109.4829]      *
+#***********************************************************************
+ -1.0  =  ktdurham
+ 0.4   =  dparameter
+ -1.0  =  ptlund
+ 21, 1, 2, 3, 4, 5, 6  =  pdgs_for_merging_cut ! PDGs for two cuts above
+#********************************************************************* 
+#  Additional hidden parameters
+#*********************************************************************
+  1	= ktscheme # hidden_parameter
+  0.4	= draa # hidden_parameter
+  -1.0	= ptamax # hidden_parameter
+  2.5	= etal # hidden_parameter
+  0.0	= ht4min # hidden_parameter
+  0.0	= ptl4min # hidden_parameter
+  True	= isoem # hidden_parameter
+  -1.0	= mmbbmax # hidden_parameter
+  0.0	= ptj4min # hidden_parameter
+  0.4	= dral # hidden_parameter
+  -1.0	= drajmax # hidden_parameter
+  -1.0	= drabmax # hidden_parameter
+  0.0	= misset # hidden_parameter
+  0.4	= draj # hidden_parameter
+  -1.0	= ptj3max # hidden_parameter
+  -1.0	= ptl4max # hidden_parameter
+  -1.0	= drblmax # hidden_parameter
+  -1.0	= drjlmax # hidden_parameter
+  0.0	= xptb # hidden_parameter
+  -1.0	= drllmax # hidden_parameter
+  0.0	= drab # hidden_parameter
+  0.0	= ht2min # hidden_parameter
+  0.0	= ptj1min # hidden_parameter
+  0.0	= etalmin # hidden_parameter
+  0.0	= mmbb # hidden_parameter
+  -1.0	= ptj4max # hidden_parameter
+  -1.0	= ptllmax # hidden_parameter
+  1.0	= ptl # hidden_parameter
+  0.0	= ptl1min # hidden_parameter
+  2.0	= ptj # hidden_parameter
+  -1.0	= mmllmax # hidden_parameter
+  0	= cutuse # hidden_parameter
+  0.0	= xptj # hidden_parameter
+  0.0	= drbl # hidden_parameter
+  1.0	= pta # hidden_parameter
+  0.0	= ptj3min # hidden_parameter
+  10.0	= etaj # hidden_parameter
+  0.0	= ptllmin # hidden_parameter
+  -1.0	= ptl2max # hidden_parameter
+  -1.0	= etab # hidden_parameter
+  0.4	= drjl # hidden_parameter
+  -1.0	= ptbmax # hidden_parameter
+  0.0	= ptj2min # hidden_parameter
+  -1.0	= ptl3max # hidden_parameter
+  -1.0	= ptj1max # hidden_parameter
+  -1.0	= dralmax # hidden_parameter
+  -1.0	= mmaamax # hidden_parameter
+  -1.0	= ptlmax # hidden_parameter
+  -1.0	= missetmax # hidden_parameter
+  0.0	= xptl # hidden_parameter
+  -1.0	= ptl1max # hidden_parameter
+  0.4	= r0gamma # hidden_parameter
+  0.0	= drbj # hidden_parameter
+  True	= clusinfo # hidden_parameter
+  1.0	= xn # hidden_parameter
+  -1.0	= drbjmax # hidden_parameter
+  True	= pdfwgt # hidden_parameter
+  2.5	= etaa # hidden_parameter
+  -1.0	= ptjmax # hidden_parameter
+  0.4	= drll # hidden_parameter
+  -1.0	= mmnlmax # hidden_parameter
+  -1.0	= ihtmax # hidden_parameter
+  -1.0	= htjmax # hidden_parameter
+  -1.0	= ptj2max # hidden_parameter
+  0.0	= ptb # hidden_parameter
+  0.0	= ptl2min # hidden_parameter
+  0.0	= ptl3min # hidden_parameter
+  -1.0	= ht3max # hidden_parameter
+  1	= highestmult # hidden_parameter
+  -1.0	= mmjjmax # hidden_parameter
+  -1.0	= ht2max # hidden_parameter
+  3.0	= lhe_version # hidden_parameter
+  0.0	= drbb # hidden_parameter
+  0.0	= htjmin # hidden_parameter
+  -1.0	= draamax # hidden_parameter
+  0.0	= etaamin # hidden_parameter
+  0.0	= xetamin # hidden_parameter
+  0.4	= drjj # hidden_parameter
+  0.0	= deltaeta # hidden_parameter
+  -1.0	= ht4max # hidden_parameter
+  0.0	= mmjj # hidden_parameter
+  0.0	= ptgmin # hidden_parameter
+  0.0	= ihtmin # hidden_parameter
+  0.0	= etabmin # hidden_parameter
+  0.0	= mmnl # hidden_parameter
+  -1.0	= drjjmax # hidden_parameter
+  False	= cut_decays # hidden_parameter
+  0.0	= mmll # hidden_parameter
+  -1.0	= drbbmax # hidden_parameter
+  0.0	= mmaa # hidden_parameter
+  0.0	= etajmin # hidden_parameter
+  0.0	= ht3min # hidden_parameter
+  1.0	= epsgamma # hidden_parameter
+  0.0	= xpta # hidden_parameter
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_12_d4_m200/param_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_12_d4_m200/param_card.dat
new file mode 100644
index 00000000000..3dfc518af57
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_12_d4_m200/param_card.dat
@@ -0,0 +1,99 @@
+######################################################################
+## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL   ####
+######################################################################
+##                                                                  ##
+##  Width set on Auto will be computed following the information    ##
+##        present in the decay.py files of the model.               ##
+##        See  arXiv:1402.1178 for more details.                    ##
+##                                                                  ##
+######################################################################
+
+###################################
+## INFORMATION FOR MASS
+###################################
+Block mass 
+    5 4.700000e+00 # MB 
+    6 1.730000e+02 # MT 
+   15 1.777000e+00 # MTA 
+   23 9.118800e+01 # MZ 
+   25 1.250000e+02 # MH 
+## Dependent parameters, given by model restrictions.
+## Those values should be edited following the 
+## analytical expression. MG5 ignores those values 
+## but they are important for interfacing the output of MG5
+## to external program such as Pythia.
+  1 0.000000e+00 # d : 0.0 
+  2 0.000000e+00 # u : 0.0 
+  3 0.000000e+00 # s : 0.0 
+  4 0.000000e+00 # c : 0.0 
+  11 0.000000e+00 # e- : 0.0 
+  12 0.000000e+00 # ve : 0.0 
+  13 0.000000e+00 # mu- : 0.0 
+  14 0.000000e+00 # vm : 0.0 
+  16 0.000000e+00 # vt : 0.0 
+  21 0.000000e+00 # g : 0.0 
+  22 0.000000e+00 # a : 0.0 
+  24 8.041900e+01 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4. - (aEW*cmath.pi*MZ__exp__2)/(Gf*sqrt__2))) 
+
+###################################
+## INFORMATION FOR QUARTCOUP
+###################################
+Block quartcoup 
+    6 -200.000000e+00 # d4 
+
+###################################
+## INFORMATION FOR SMINPUTS
+###################################
+Block sminputs 
+    1 1.325070e+02 # aEWM1 
+    2 1.166390e-05 # Gf 
+    3 1.180000e-01 # aS (Note that Parameter not used if you use a PDF set) 
+
+###################################
+## INFORMATION FOR TRIPCOUP
+###################################
+Block tripcoup 
+    4 12.000000e+00 # c3 
+
+###################################
+## INFORMATION FOR YUKAWA
+###################################
+Block yukawa 
+    5 4.700000e+00 # ymb 
+    6 1.730000e+02 # ymt 
+   15 1.777000e+00 # ymtau 
+
+###################################
+## INFORMATION FOR DECAY
+###################################
+DECAY   6 1.491500e+00 # WT 
+DECAY  23 2.441404e+00 # WZ 
+DECAY  24 2.047600e+00 # WW 
+DECAY  25 6.382339e-03 # WH 
+## Dependent parameters, given by model restrictions.
+## Those values should be edited following the 
+## analytical expression. MG5 ignores those values 
+## but they are important for interfacing the output of MG5
+## to external program such as Pythia.
+DECAY  1 0.000000e+00 # d : 0.0 
+DECAY  2 0.000000e+00 # u : 0.0 
+DECAY  3 0.000000e+00 # s : 0.0 
+DECAY  4 0.000000e+00 # c : 0.0 
+DECAY  5 0.000000e+00 # b : 0.0 
+DECAY  11 0.000000e+00 # e- : 0.0 
+DECAY  12 0.000000e+00 # ve : 0.0 
+DECAY  13 0.000000e+00 # mu- : 0.0 
+DECAY  14 0.000000e+00 # vm : 0.0 
+DECAY  15 0.000000e+00 # ta- : 0.0 
+DECAY  16 0.000000e+00 # vt : 0.0 
+DECAY  21 0.000000e+00 # g : 0.0 
+DECAY  22 0.000000e+00 # a : 0.0 
+#===========================================================
+# QUANTUM NUMBERS OF NEW STATE(S) (NON SM PDG CODE)
+#===========================================================
+
+Block QNUMBERS 82  # gh 
+        1 0  # 3 times electric charge
+        2 1  # number of spin states (2S+1)
+        3 8  # colour rep (1: singlet, 3: triplet, 8: octet)
+        4 1  # Particle/Antiparticle distinction (0=own anti)
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_12_d4_m200/proc_card_mg5.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_12_d4_m200/proc_card_mg5.dat
new file mode 100644
index 00000000000..db7d2dc28a4
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_12_d4_m200/proc_card_mg5.dat
@@ -0,0 +1,42 @@
+#************************************************************
+#*                     MadGraph5_aMC@NLO                    *
+#*                                                          *
+#*                *                       *                 *
+#*                  *        * *        *                   *
+#*                    * * * * 5 * * * *                     *
+#*                  *        * *        *                   *
+#*                *                       *                 *
+#*                                                          *
+#*                                                          *
+#*         VERSION 2.9.18                2023-12-08         *
+#*                                                          *
+#*    The MadGraph5_aMC@NLO Development Team - Find us at   *
+#*    https://server06.fynu.ucl.ac.be/projects/madgraph     *
+#*                                                          *
+#************************************************************
+#*                                                          *
+#*               Command File for MadGraph5_aMC@NLO         *
+#*                                                          *
+#*     run as ./bin/mg5_aMC  filename                       *
+#*                                                          *
+#************************************************************
+set low_mem_multicore_nlo_generation False
+set gauge unitary
+set loop_color_flows False
+set max_npoint_for_channel 0
+set default_unset_couplings 99
+set max_t_for_channel 99
+set zerowidth_tchannel True
+set group_subprocesses Auto
+set ignore_six_quark_processes False
+set loop_optimized_output True
+set complex_mass_scheme False
+import model loop_sm_c3d4
+define p = g u c d s u~ c~ d~ s~
+define j = g u c d s u~ c~ d~ s~
+define l+ = e+ mu+
+define l- = e- mu-
+define vl = ve vm vt
+define vl~ = ve~ vm~ vt~
+generate p p > h h h [QCD]
+output GF_HHH_c3_0_d4_0 -nojpeg
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_12_d4_m200/reweight_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_12_d4_m200/reweight_card.dat
new file mode 100644
index 00000000000..c0529342fbc
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_12_d4_m200/reweight_card.dat
@@ -0,0 +1,2 @@
+#*************************************************************************
+change rwgt_dir rwgt
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_12_d4_m200/run_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_12_d4_m200/run_card.dat
new file mode 100644
index 00000000000..869f39f5de7
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_12_d4_m200/run_card.dat
@@ -0,0 +1,267 @@
+#*********************************************************************
+#                       MadGraph5_aMC@NLO                            *
+#                                                                    *
+#                     run_card.dat MadEvent                          *
+#                                                                    *
+#  This file is used to set the parameters of the run.               *
+#                                                                    *
+#  Some notation/conventions:                                        *
+#                                                                    *
+#   Lines starting with a '# ' are info or comments                  *
+#                                                                    *
+#   mind the format:   value    = variable     ! comment             *
+#                                                                    *
+#   To display more options, you can type the command:               *
+#      update to_full                                                *
+#*********************************************************************
+#                                                                    
+#*********************************************************************
+# Tag name for the run (one word)                                    *
+#*********************************************************************
+  tag_1	= run_tag ! name of the run 
+#*********************************************************************
+# Number of events and rnd seed                                      *
+# Warning: Do not generate more than 1M events in a single run       *
+#*********************************************************************
+  100000	= nevents ! Number of unweighted events requested 
+  0	= iseed ! rnd seed (0=assigned automatically=default))
+#*********************************************************************
+# Collider type and energy                                           *
+# lpp: 0=No PDF, 1=proton, -1=antiproton, 2=photon from proton,      *
+#                3=photon from electron, 4=photon from muon          *
+#*********************************************************************
+  1	= lpp1 ! beam 1 type 
+  1	= lpp2 ! beam 2 type
+  6800.0	= ebeam1 ! beam 1 total energy in GeV
+  6800.0	= ebeam2 ! beam 2 total energy in GeV
+
+#*********************************************************************
+# Beam polarization from -100 (left-handed) to 100 (right-handed)    *
+#*********************************************************************
+     0.0     = polbeam1 ! beam polarization for beam 1
+     0.0     = polbeam2 ! beam polarization for beam 2
+
+
+#*********************************************************************
+# PDF CHOICE: this automatically fixes also alpha_s and its evol.    *
+#*********************************************************************
+  lhapdf	= pdlabel ! PDF set                                     
+  325500	= lhaid ! if pdlabel=lhapdf, this is the lhapdf number
+# To see heavy ion options: type "update ion_pdf"
+#*********************************************************************
+# Renormalization and factorization scales                           *
+#*********************************************************************
+  False	= fixed_ren_scale ! if .true. use fixed ren scale
+  False	= fixed_fac_scale ! if .true. use fixed fac scale
+  91.188	= scale ! fixed ren scale
+  91.188	= dsqrt_q2fact1 ! fixed fact scale for pdf1
+  91.188	= dsqrt_q2fact2 ! fixed fact scale for pdf2
+  -1	= dynamical_scale_choice ! Choose one of the preselected dynamical choices
+  1.0	= scalefact ! scale factor for event-by-event scales
+#*********************************************************************
+# Type and output format
+#*********************************************************************
+  True	= gridpack !True = setting up the grid pack
+  -1.0	= time_of_flight ! threshold (in mm) below which the invariant livetime is not written (-1 means not written)
+  sum	= event_norm ! average/sum. Normalization of the weight in the LHEF
+
+#*********************************************************************
+# Matching parameter (MLM only)
+#*********************************************************************
+ 0 = ickkw            ! 0 no matching, 1 MLM
+ 1.0 = alpsfact         ! scale factor for QCD emission vx
+ False = chcluster        ! cluster only according to channel diag
+ 4 = asrwgtflavor     ! highest quark flavor for a_s reweight
+ True  = auto_ptj_mjj  ! Automatic setting of ptj and mjj if xqcut >0
+                                   ! (turn off for VBF and single top processes)
+ 0.0   = xqcut   ! minimum kt jet measure between partons
+
+
+#*********************************************************************
+#
+#*********************************************************************
+# Phase-Space Optimization strategy (basic options)
+#*********************************************************************
+  0	= nhel ! using helicities importance sampling or not.
+                             ! 0: sum over helicity, 1: importance sampling
+  2	= sde_strategy ! default integration strategy (hep-ph/2021.00773)
+                             ! 1 is old strategy (using amp square)
+			     ! 2 is new strategy (using only the denominator)
+# To see advanced option for Phase-Space optimization: type "update psoptim"			     
+#*********************************************************************
+# Generation bias, check the wiki page below for more information:   *
+#  'cp3.irmp.ucl.ac.be/projects/madgraph/wiki/LOEventGenerationBias' *
+#*********************************************************************
+  None	= bias_module ! Bias type of bias, [None, ptj_bias, -custom_folder-]
+  {}	= bias_parameters ! Specifies the parameters of the module.
+#
+#*******************************                                                 
+# Parton level cuts definition *
+#*******************************                                     
+#                                                                    
+#
+#*********************************************************************
+# BW cutoff (M+/-bwcutoff*Gamma) ! Define on/off-shell for "$" and decay  
+#*********************************************************************
+  15.0	= bwcutoff ! (M+/-bwcutoff*Gamma)
+#*********************************************************************
+# Standard Cuts                                                      *
+#*********************************************************************
+# Minimum and maximum pt's (for max, -1 means no cut)                *
+#*********************************************************************
+  {}	= pt_min_pdg ! pt cut for other particles (use pdg code). Applied on particle and anti-particle
+  {}	= pt_max_pdg ! pt cut for other particles (syntax e.g. {6: 100, 25: 50}) 
+
+#*********************************************************************
+# Minimum and maximum E's (in the center of mass frame)              *
+#*********************************************************************
+  0.0  = ej     ! minimum E for the jets
+  0.0  = eb     ! minimum E for the b
+  0.0  = ea     ! minimum E for the photons
+  0.0  = el     ! minimum E for the charged leptons
+  -1.0   = ejmax ! maximum E for the jets
+ -1.0   = ebmax ! maximum E for the b
+ -1.0   = eamax ! maximum E for the photons
+ -1.0   = elmax ! maximum E for the charged leptons
+ {} = e_min_pdg ! E cut for other particles (use pdg code). Applied on particle and anti-particle
+ {} = e_max_pdg ! E cut for other particles (syntax e.g. {6: 100, 25: 50})
+
+#*********************************************************************
+# Maximum and minimum absolute rapidity (for max, -1 means no cut)   *
+#*********************************************************************
+  {}	= eta_min_pdg ! rap cut for other particles (use pdg code). Applied on particle and anti-particle
+  {}	= eta_max_pdg ! rap cut for other particles (syntax e.g. {6: 2.5, 23: 5})
+#*********************************************************************
+# Minimum and maximum DeltaR distance                                *
+#*********************************************************************
+#*********************************************************************
+# Minimum and maximum invariant mass for pairs                       *
+#*********************************************************************
+  {}	= mxx_min_pdg ! min invariant mass of a pair of particles X/X~ (e.g. {6:250})
+  {'default': False}	= mxx_only_part_antipart ! if True the invariant mass is applied only 
+                       ! to pairs of particle/antiparticle and not to pairs of the same pdg codes.  
+#*********************************************************************
+# Inclusive cuts                                                     *
+#*********************************************************************
+  0.0	= ptheavy ! minimum pt for at least one heavy final state
+#*********************************************************************
+# maximal pdg code for quark to be considered as a light jet         *
+# (otherwise b cuts are applied)                                     *
+#*********************************************************************
+  4	= maxjetflavor ! Maximum jet pdg code
+#*********************************************************************
+#
+#*********************************************************************
+# Store info for systematics studies                                 *
+# WARNING: Do not use for interference type of computation           *
+#*********************************************************************
+  True	= use_syst ! Enable systematics studies
+#
+  None	= systematics_program ! none, systematics [python], SysCalc [depreceted, C++]
+  ['--mur=0.5,1,2', '--muf=0.5,1,2', '--pdf=errorset']	= systematics_arguments ! see: https://cp3.irmp.ucl.ac.be/projects/madgraph/wiki/Systematics#Systematicspythonmodule
+# Syscalc is deprecated but to see the associate options type'update syscalc'
+#***********************************************************************
+# Turn on either the ktdurham or ptlund cut to activate                *
+# CKKW(L) merging with Pythia8 [arXiv:1410.3012, arXiv:1109.4829]      *
+#***********************************************************************
+ -1.0  =  ktdurham
+ 0.4   =  dparameter
+ -1.0  =  ptlund
+ 21, 1, 2, 3, 4, 5, 6  =  pdgs_for_merging_cut ! PDGs for two cuts above
+#********************************************************************* 
+#  Additional hidden parameters
+#*********************************************************************
+  1	= ktscheme # hidden_parameter
+  0.4	= draa # hidden_parameter
+  -1.0	= ptamax # hidden_parameter
+  2.5	= etal # hidden_parameter
+  0.0	= ht4min # hidden_parameter
+  0.0	= ptl4min # hidden_parameter
+  True	= isoem # hidden_parameter
+  -1.0	= mmbbmax # hidden_parameter
+  0.0	= ptj4min # hidden_parameter
+  0.4	= dral # hidden_parameter
+  -1.0	= drajmax # hidden_parameter
+  -1.0	= drabmax # hidden_parameter
+  0.0	= misset # hidden_parameter
+  0.4	= draj # hidden_parameter
+  -1.0	= ptj3max # hidden_parameter
+  -1.0	= ptl4max # hidden_parameter
+  -1.0	= drblmax # hidden_parameter
+  -1.0	= drjlmax # hidden_parameter
+  0.0	= xptb # hidden_parameter
+  -1.0	= drllmax # hidden_parameter
+  0.0	= drab # hidden_parameter
+  0.0	= ht2min # hidden_parameter
+  0.0	= ptj1min # hidden_parameter
+  0.0	= etalmin # hidden_parameter
+  0.0	= mmbb # hidden_parameter
+  -1.0	= ptj4max # hidden_parameter
+  -1.0	= ptllmax # hidden_parameter
+  1.0	= ptl # hidden_parameter
+  0.0	= ptl1min # hidden_parameter
+  2.0	= ptj # hidden_parameter
+  -1.0	= mmllmax # hidden_parameter
+  0	= cutuse # hidden_parameter
+  0.0	= xptj # hidden_parameter
+  0.0	= drbl # hidden_parameter
+  1.0	= pta # hidden_parameter
+  0.0	= ptj3min # hidden_parameter
+  10.0	= etaj # hidden_parameter
+  0.0	= ptllmin # hidden_parameter
+  -1.0	= ptl2max # hidden_parameter
+  -1.0	= etab # hidden_parameter
+  0.4	= drjl # hidden_parameter
+  -1.0	= ptbmax # hidden_parameter
+  0.0	= ptj2min # hidden_parameter
+  -1.0	= ptl3max # hidden_parameter
+  -1.0	= ptj1max # hidden_parameter
+  -1.0	= dralmax # hidden_parameter
+  -1.0	= mmaamax # hidden_parameter
+  -1.0	= ptlmax # hidden_parameter
+  -1.0	= missetmax # hidden_parameter
+  0.0	= xptl # hidden_parameter
+  -1.0	= ptl1max # hidden_parameter
+  0.4	= r0gamma # hidden_parameter
+  0.0	= drbj # hidden_parameter
+  True	= clusinfo # hidden_parameter
+  1.0	= xn # hidden_parameter
+  -1.0	= drbjmax # hidden_parameter
+  True	= pdfwgt # hidden_parameter
+  2.5	= etaa # hidden_parameter
+  -1.0	= ptjmax # hidden_parameter
+  0.4	= drll # hidden_parameter
+  -1.0	= mmnlmax # hidden_parameter
+  -1.0	= ihtmax # hidden_parameter
+  -1.0	= htjmax # hidden_parameter
+  -1.0	= ptj2max # hidden_parameter
+  0.0	= ptb # hidden_parameter
+  0.0	= ptl2min # hidden_parameter
+  0.0	= ptl3min # hidden_parameter
+  -1.0	= ht3max # hidden_parameter
+  1	= highestmult # hidden_parameter
+  -1.0	= mmjjmax # hidden_parameter
+  -1.0	= ht2max # hidden_parameter
+  3.0	= lhe_version # hidden_parameter
+  0.0	= drbb # hidden_parameter
+  0.0	= htjmin # hidden_parameter
+  -1.0	= draamax # hidden_parameter
+  0.0	= etaamin # hidden_parameter
+  0.0	= xetamin # hidden_parameter
+  0.4	= drjj # hidden_parameter
+  0.0	= deltaeta # hidden_parameter
+  -1.0	= ht4max # hidden_parameter
+  0.0	= mmjj # hidden_parameter
+  0.0	= ptgmin # hidden_parameter
+  0.0	= ihtmin # hidden_parameter
+  0.0	= etabmin # hidden_parameter
+  0.0	= mmnl # hidden_parameter
+  -1.0	= drjjmax # hidden_parameter
+  False	= cut_decays # hidden_parameter
+  0.0	= mmll # hidden_parameter
+  -1.0	= drbbmax # hidden_parameter
+  0.0	= mmaa # hidden_parameter
+  0.0	= etajmin # hidden_parameter
+  0.0	= ht3min # hidden_parameter
+  1.0	= epsgamma # hidden_parameter
+  0.0	= xpta # hidden_parameter
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_3_d4_0_kt_1p2/param_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_3_d4_0_kt_1p2/param_card.dat
new file mode 100644
index 00000000000..f4d9b184522
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_3_d4_0_kt_1p2/param_card.dat
@@ -0,0 +1,99 @@
+######################################################################
+## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL   ####
+######################################################################
+##                                                                  ##
+##  Width set on Auto will be computed following the information    ##
+##        present in the decay.py files of the model.               ##
+##        See  arXiv:1402.1178 for more details.                    ##
+##                                                                  ##
+######################################################################
+
+###################################
+## INFORMATION FOR MASS
+###################################
+Block mass 
+    5 4.700000e+00 # MB 
+    6 1.730000e+02 # MT 
+   15 1.777000e+00 # MTA 
+   23 9.118800e+01 # MZ 
+   25 1.250000e+02 # MH 
+## Dependent parameters, given by model restrictions.
+## Those values should be edited following the 
+## analytical expression. MG5 ignores those values 
+## but they are important for interfacing the output of MG5
+## to external program such as Pythia.
+  1 0.000000e+00 # d : 0.0 
+  2 0.000000e+00 # u : 0.0 
+  3 0.000000e+00 # s : 0.0 
+  4 0.000000e+00 # c : 0.0 
+  11 0.000000e+00 # e- : 0.0 
+  12 0.000000e+00 # ve : 0.0 
+  13 0.000000e+00 # mu- : 0.0 
+  14 0.000000e+00 # vm : 0.0 
+  16 0.000000e+00 # vt : 0.0 
+  21 0.000000e+00 # g : 0.0 
+  22 0.000000e+00 # a : 0.0 
+  24 8.041900e+01 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4. - (aEW*cmath.pi*MZ__exp__2)/(Gf*sqrt__2))) 
+
+###################################
+## INFORMATION FOR QUARTCOUP
+###################################
+Block quartcoup 
+    6 0.000000e+00 # d4 
+
+###################################
+## INFORMATION FOR SMINPUTS
+###################################
+Block sminputs 
+    1 1.325070e+02 # aEWM1 
+    2 1.166390e-05 # Gf 
+    3 1.180000e-01 # aS (Note that Parameter not used if you use a PDF set) 
+
+###################################
+## INFORMATION FOR TRIPCOUP
+###################################
+Block tripcoup 
+    4 3.000000e+00 # c3 
+
+###################################
+## INFORMATION FOR YUKAWA
+###################################
+Block yukawa 
+    5 4.700000e+00 # ymb 
+    6 2.076000e+02 # ymt 
+   15 1.777000e+00 # ymtau 
+
+###################################
+## INFORMATION FOR DECAY
+###################################
+DECAY   6 1.491500e+00 # WT 
+DECAY  23 2.441404e+00 # WZ 
+DECAY  24 2.047600e+00 # WW 
+DECAY  25 6.382339e-03 # WH 
+## Dependent parameters, given by model restrictions.
+## Those values should be edited following the 
+## analytical expression. MG5 ignores those values 
+## but they are important for interfacing the output of MG5
+## to external program such as Pythia.
+DECAY  1 0.000000e+00 # d : 0.0 
+DECAY  2 0.000000e+00 # u : 0.0 
+DECAY  3 0.000000e+00 # s : 0.0 
+DECAY  4 0.000000e+00 # c : 0.0 
+DECAY  5 0.000000e+00 # b : 0.0 
+DECAY  11 0.000000e+00 # e- : 0.0 
+DECAY  12 0.000000e+00 # ve : 0.0 
+DECAY  13 0.000000e+00 # mu- : 0.0 
+DECAY  14 0.000000e+00 # vm : 0.0 
+DECAY  15 0.000000e+00 # ta- : 0.0 
+DECAY  16 0.000000e+00 # vt : 0.0 
+DECAY  21 0.000000e+00 # g : 0.0 
+DECAY  22 0.000000e+00 # a : 0.0 
+#===========================================================
+# QUANTUM NUMBERS OF NEW STATE(S) (NON SM PDG CODE)
+#===========================================================
+
+Block QNUMBERS 82  # gh 
+        1 0  # 3 times electric charge
+        2 1  # number of spin states (2S+1)
+        3 8  # colour rep (1: singlet, 3: triplet, 8: octet)
+        4 1  # Particle/Antiparticle distinction (0=own anti)
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_3_d4_0_kt_1p2/proc_card_mg5.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_3_d4_0_kt_1p2/proc_card_mg5.dat
new file mode 100644
index 00000000000..db7d2dc28a4
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_3_d4_0_kt_1p2/proc_card_mg5.dat
@@ -0,0 +1,42 @@
+#************************************************************
+#*                     MadGraph5_aMC@NLO                    *
+#*                                                          *
+#*                *                       *                 *
+#*                  *        * *        *                   *
+#*                    * * * * 5 * * * *                     *
+#*                  *        * *        *                   *
+#*                *                       *                 *
+#*                                                          *
+#*                                                          *
+#*         VERSION 2.9.18                2023-12-08         *
+#*                                                          *
+#*    The MadGraph5_aMC@NLO Development Team - Find us at   *
+#*    https://server06.fynu.ucl.ac.be/projects/madgraph     *
+#*                                                          *
+#************************************************************
+#*                                                          *
+#*               Command File for MadGraph5_aMC@NLO         *
+#*                                                          *
+#*     run as ./bin/mg5_aMC  filename                       *
+#*                                                          *
+#************************************************************
+set low_mem_multicore_nlo_generation False
+set gauge unitary
+set loop_color_flows False
+set max_npoint_for_channel 0
+set default_unset_couplings 99
+set max_t_for_channel 99
+set zerowidth_tchannel True
+set group_subprocesses Auto
+set ignore_six_quark_processes False
+set loop_optimized_output True
+set complex_mass_scheme False
+import model loop_sm_c3d4
+define p = g u c d s u~ c~ d~ s~
+define j = g u c d s u~ c~ d~ s~
+define l+ = e+ mu+
+define l- = e- mu-
+define vl = ve vm vt
+define vl~ = ve~ vm~ vt~
+generate p p > h h h [QCD]
+output GF_HHH_c3_0_d4_0 -nojpeg
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_3_d4_0_kt_1p2/reweight_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_3_d4_0_kt_1p2/reweight_card.dat
new file mode 100644
index 00000000000..c0529342fbc
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_3_d4_0_kt_1p2/reweight_card.dat
@@ -0,0 +1,2 @@
+#*************************************************************************
+change rwgt_dir rwgt
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_3_d4_0_kt_1p2/run_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_3_d4_0_kt_1p2/run_card.dat
new file mode 100644
index 00000000000..869f39f5de7
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_3_d4_0_kt_1p2/run_card.dat
@@ -0,0 +1,267 @@
+#*********************************************************************
+#                       MadGraph5_aMC@NLO                            *
+#                                                                    *
+#                     run_card.dat MadEvent                          *
+#                                                                    *
+#  This file is used to set the parameters of the run.               *
+#                                                                    *
+#  Some notation/conventions:                                        *
+#                                                                    *
+#   Lines starting with a '# ' are info or comments                  *
+#                                                                    *
+#   mind the format:   value    = variable     ! comment             *
+#                                                                    *
+#   To display more options, you can type the command:               *
+#      update to_full                                                *
+#*********************************************************************
+#                                                                    
+#*********************************************************************
+# Tag name for the run (one word)                                    *
+#*********************************************************************
+  tag_1	= run_tag ! name of the run 
+#*********************************************************************
+# Number of events and rnd seed                                      *
+# Warning: Do not generate more than 1M events in a single run       *
+#*********************************************************************
+  100000	= nevents ! Number of unweighted events requested 
+  0	= iseed ! rnd seed (0=assigned automatically=default))
+#*********************************************************************
+# Collider type and energy                                           *
+# lpp: 0=No PDF, 1=proton, -1=antiproton, 2=photon from proton,      *
+#                3=photon from electron, 4=photon from muon          *
+#*********************************************************************
+  1	= lpp1 ! beam 1 type 
+  1	= lpp2 ! beam 2 type
+  6800.0	= ebeam1 ! beam 1 total energy in GeV
+  6800.0	= ebeam2 ! beam 2 total energy in GeV
+
+#*********************************************************************
+# Beam polarization from -100 (left-handed) to 100 (right-handed)    *
+#*********************************************************************
+     0.0     = polbeam1 ! beam polarization for beam 1
+     0.0     = polbeam2 ! beam polarization for beam 2
+
+
+#*********************************************************************
+# PDF CHOICE: this automatically fixes also alpha_s and its evol.    *
+#*********************************************************************
+  lhapdf	= pdlabel ! PDF set                                     
+  325500	= lhaid ! if pdlabel=lhapdf, this is the lhapdf number
+# To see heavy ion options: type "update ion_pdf"
+#*********************************************************************
+# Renormalization and factorization scales                           *
+#*********************************************************************
+  False	= fixed_ren_scale ! if .true. use fixed ren scale
+  False	= fixed_fac_scale ! if .true. use fixed fac scale
+  91.188	= scale ! fixed ren scale
+  91.188	= dsqrt_q2fact1 ! fixed fact scale for pdf1
+  91.188	= dsqrt_q2fact2 ! fixed fact scale for pdf2
+  -1	= dynamical_scale_choice ! Choose one of the preselected dynamical choices
+  1.0	= scalefact ! scale factor for event-by-event scales
+#*********************************************************************
+# Type and output format
+#*********************************************************************
+  True	= gridpack !True = setting up the grid pack
+  -1.0	= time_of_flight ! threshold (in mm) below which the invariant livetime is not written (-1 means not written)
+  sum	= event_norm ! average/sum. Normalization of the weight in the LHEF
+
+#*********************************************************************
+# Matching parameter (MLM only)
+#*********************************************************************
+ 0 = ickkw            ! 0 no matching, 1 MLM
+ 1.0 = alpsfact         ! scale factor for QCD emission vx
+ False = chcluster        ! cluster only according to channel diag
+ 4 = asrwgtflavor     ! highest quark flavor for a_s reweight
+ True  = auto_ptj_mjj  ! Automatic setting of ptj and mjj if xqcut >0
+                                   ! (turn off for VBF and single top processes)
+ 0.0   = xqcut   ! minimum kt jet measure between partons
+
+
+#*********************************************************************
+#
+#*********************************************************************
+# Phase-Space Optimization strategy (basic options)
+#*********************************************************************
+  0	= nhel ! using helicities importance sampling or not.
+                             ! 0: sum over helicity, 1: importance sampling
+  2	= sde_strategy ! default integration strategy (hep-ph/2021.00773)
+                             ! 1 is old strategy (using amp square)
+			     ! 2 is new strategy (using only the denominator)
+# To see advanced option for Phase-Space optimization: type "update psoptim"			     
+#*********************************************************************
+# Generation bias, check the wiki page below for more information:   *
+#  'cp3.irmp.ucl.ac.be/projects/madgraph/wiki/LOEventGenerationBias' *
+#*********************************************************************
+  None	= bias_module ! Bias type of bias, [None, ptj_bias, -custom_folder-]
+  {}	= bias_parameters ! Specifies the parameters of the module.
+#
+#*******************************                                                 
+# Parton level cuts definition *
+#*******************************                                     
+#                                                                    
+#
+#*********************************************************************
+# BW cutoff (M+/-bwcutoff*Gamma) ! Define on/off-shell for "$" and decay  
+#*********************************************************************
+  15.0	= bwcutoff ! (M+/-bwcutoff*Gamma)
+#*********************************************************************
+# Standard Cuts                                                      *
+#*********************************************************************
+# Minimum and maximum pt's (for max, -1 means no cut)                *
+#*********************************************************************
+  {}	= pt_min_pdg ! pt cut for other particles (use pdg code). Applied on particle and anti-particle
+  {}	= pt_max_pdg ! pt cut for other particles (syntax e.g. {6: 100, 25: 50}) 
+
+#*********************************************************************
+# Minimum and maximum E's (in the center of mass frame)              *
+#*********************************************************************
+  0.0  = ej     ! minimum E for the jets
+  0.0  = eb     ! minimum E for the b
+  0.0  = ea     ! minimum E for the photons
+  0.0  = el     ! minimum E for the charged leptons
+  -1.0   = ejmax ! maximum E for the jets
+ -1.0   = ebmax ! maximum E for the b
+ -1.0   = eamax ! maximum E for the photons
+ -1.0   = elmax ! maximum E for the charged leptons
+ {} = e_min_pdg ! E cut for other particles (use pdg code). Applied on particle and anti-particle
+ {} = e_max_pdg ! E cut for other particles (syntax e.g. {6: 100, 25: 50})
+
+#*********************************************************************
+# Maximum and minimum absolute rapidity (for max, -1 means no cut)   *
+#*********************************************************************
+  {}	= eta_min_pdg ! rap cut for other particles (use pdg code). Applied on particle and anti-particle
+  {}	= eta_max_pdg ! rap cut for other particles (syntax e.g. {6: 2.5, 23: 5})
+#*********************************************************************
+# Minimum and maximum DeltaR distance                                *
+#*********************************************************************
+#*********************************************************************
+# Minimum and maximum invariant mass for pairs                       *
+#*********************************************************************
+  {}	= mxx_min_pdg ! min invariant mass of a pair of particles X/X~ (e.g. {6:250})
+  {'default': False}	= mxx_only_part_antipart ! if True the invariant mass is applied only 
+                       ! to pairs of particle/antiparticle and not to pairs of the same pdg codes.  
+#*********************************************************************
+# Inclusive cuts                                                     *
+#*********************************************************************
+  0.0	= ptheavy ! minimum pt for at least one heavy final state
+#*********************************************************************
+# maximal pdg code for quark to be considered as a light jet         *
+# (otherwise b cuts are applied)                                     *
+#*********************************************************************
+  4	= maxjetflavor ! Maximum jet pdg code
+#*********************************************************************
+#
+#*********************************************************************
+# Store info for systematics studies                                 *
+# WARNING: Do not use for interference type of computation           *
+#*********************************************************************
+  True	= use_syst ! Enable systematics studies
+#
+  None	= systematics_program ! none, systematics [python], SysCalc [depreceted, C++]
+  ['--mur=0.5,1,2', '--muf=0.5,1,2', '--pdf=errorset']	= systematics_arguments ! see: https://cp3.irmp.ucl.ac.be/projects/madgraph/wiki/Systematics#Systematicspythonmodule
+# Syscalc is deprecated but to see the associate options type'update syscalc'
+#***********************************************************************
+# Turn on either the ktdurham or ptlund cut to activate                *
+# CKKW(L) merging with Pythia8 [arXiv:1410.3012, arXiv:1109.4829]      *
+#***********************************************************************
+ -1.0  =  ktdurham
+ 0.4   =  dparameter
+ -1.0  =  ptlund
+ 21, 1, 2, 3, 4, 5, 6  =  pdgs_for_merging_cut ! PDGs for two cuts above
+#********************************************************************* 
+#  Additional hidden parameters
+#*********************************************************************
+  1	= ktscheme # hidden_parameter
+  0.4	= draa # hidden_parameter
+  -1.0	= ptamax # hidden_parameter
+  2.5	= etal # hidden_parameter
+  0.0	= ht4min # hidden_parameter
+  0.0	= ptl4min # hidden_parameter
+  True	= isoem # hidden_parameter
+  -1.0	= mmbbmax # hidden_parameter
+  0.0	= ptj4min # hidden_parameter
+  0.4	= dral # hidden_parameter
+  -1.0	= drajmax # hidden_parameter
+  -1.0	= drabmax # hidden_parameter
+  0.0	= misset # hidden_parameter
+  0.4	= draj # hidden_parameter
+  -1.0	= ptj3max # hidden_parameter
+  -1.0	= ptl4max # hidden_parameter
+  -1.0	= drblmax # hidden_parameter
+  -1.0	= drjlmax # hidden_parameter
+  0.0	= xptb # hidden_parameter
+  -1.0	= drllmax # hidden_parameter
+  0.0	= drab # hidden_parameter
+  0.0	= ht2min # hidden_parameter
+  0.0	= ptj1min # hidden_parameter
+  0.0	= etalmin # hidden_parameter
+  0.0	= mmbb # hidden_parameter
+  -1.0	= ptj4max # hidden_parameter
+  -1.0	= ptllmax # hidden_parameter
+  1.0	= ptl # hidden_parameter
+  0.0	= ptl1min # hidden_parameter
+  2.0	= ptj # hidden_parameter
+  -1.0	= mmllmax # hidden_parameter
+  0	= cutuse # hidden_parameter
+  0.0	= xptj # hidden_parameter
+  0.0	= drbl # hidden_parameter
+  1.0	= pta # hidden_parameter
+  0.0	= ptj3min # hidden_parameter
+  10.0	= etaj # hidden_parameter
+  0.0	= ptllmin # hidden_parameter
+  -1.0	= ptl2max # hidden_parameter
+  -1.0	= etab # hidden_parameter
+  0.4	= drjl # hidden_parameter
+  -1.0	= ptbmax # hidden_parameter
+  0.0	= ptj2min # hidden_parameter
+  -1.0	= ptl3max # hidden_parameter
+  -1.0	= ptj1max # hidden_parameter
+  -1.0	= dralmax # hidden_parameter
+  -1.0	= mmaamax # hidden_parameter
+  -1.0	= ptlmax # hidden_parameter
+  -1.0	= missetmax # hidden_parameter
+  0.0	= xptl # hidden_parameter
+  -1.0	= ptl1max # hidden_parameter
+  0.4	= r0gamma # hidden_parameter
+  0.0	= drbj # hidden_parameter
+  True	= clusinfo # hidden_parameter
+  1.0	= xn # hidden_parameter
+  -1.0	= drbjmax # hidden_parameter
+  True	= pdfwgt # hidden_parameter
+  2.5	= etaa # hidden_parameter
+  -1.0	= ptjmax # hidden_parameter
+  0.4	= drll # hidden_parameter
+  -1.0	= mmnlmax # hidden_parameter
+  -1.0	= ihtmax # hidden_parameter
+  -1.0	= htjmax # hidden_parameter
+  -1.0	= ptj2max # hidden_parameter
+  0.0	= ptb # hidden_parameter
+  0.0	= ptl2min # hidden_parameter
+  0.0	= ptl3min # hidden_parameter
+  -1.0	= ht3max # hidden_parameter
+  1	= highestmult # hidden_parameter
+  -1.0	= mmjjmax # hidden_parameter
+  -1.0	= ht2max # hidden_parameter
+  3.0	= lhe_version # hidden_parameter
+  0.0	= drbb # hidden_parameter
+  0.0	= htjmin # hidden_parameter
+  -1.0	= draamax # hidden_parameter
+  0.0	= etaamin # hidden_parameter
+  0.0	= xetamin # hidden_parameter
+  0.4	= drjj # hidden_parameter
+  0.0	= deltaeta # hidden_parameter
+  -1.0	= ht4max # hidden_parameter
+  0.0	= mmjj # hidden_parameter
+  0.0	= ptgmin # hidden_parameter
+  0.0	= ihtmin # hidden_parameter
+  0.0	= etabmin # hidden_parameter
+  0.0	= mmnl # hidden_parameter
+  -1.0	= drjjmax # hidden_parameter
+  False	= cut_decays # hidden_parameter
+  0.0	= mmll # hidden_parameter
+  -1.0	= drbbmax # hidden_parameter
+  0.0	= mmaa # hidden_parameter
+  0.0	= etajmin # hidden_parameter
+  0.0	= ht3min # hidden_parameter
+  1.0	= epsgamma # hidden_parameter
+  0.0	= xpta # hidden_parameter
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_6_d4_0/param_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_6_d4_0/param_card.dat
new file mode 100644
index 00000000000..f3eb7eeaed7
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_6_d4_0/param_card.dat
@@ -0,0 +1,99 @@
+######################################################################
+## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL   ####
+######################################################################
+##                                                                  ##
+##  Width set on Auto will be computed following the information    ##
+##        present in the decay.py files of the model.               ##
+##        See  arXiv:1402.1178 for more details.                    ##
+##                                                                  ##
+######################################################################
+
+###################################
+## INFORMATION FOR MASS
+###################################
+Block mass 
+    5 4.700000e+00 # MB 
+    6 1.730000e+02 # MT 
+   15 1.777000e+00 # MTA 
+   23 9.118800e+01 # MZ 
+   25 1.250000e+02 # MH 
+## Dependent parameters, given by model restrictions.
+## Those values should be edited following the 
+## analytical expression. MG5 ignores those values 
+## but they are important for interfacing the output of MG5
+## to external program such as Pythia.
+  1 0.000000e+00 # d : 0.0 
+  2 0.000000e+00 # u : 0.0 
+  3 0.000000e+00 # s : 0.0 
+  4 0.000000e+00 # c : 0.0 
+  11 0.000000e+00 # e- : 0.0 
+  12 0.000000e+00 # ve : 0.0 
+  13 0.000000e+00 # mu- : 0.0 
+  14 0.000000e+00 # vm : 0.0 
+  16 0.000000e+00 # vt : 0.0 
+  21 0.000000e+00 # g : 0.0 
+  22 0.000000e+00 # a : 0.0 
+  24 8.041900e+01 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4. - (aEW*cmath.pi*MZ__exp__2)/(Gf*sqrt__2))) 
+
+###################################
+## INFORMATION FOR QUARTCOUP
+###################################
+Block quartcoup 
+    6 0.000000e+00 # d4 
+
+###################################
+## INFORMATION FOR SMINPUTS
+###################################
+Block sminputs 
+    1 1.325070e+02 # aEWM1 
+    2 1.166390e-05 # Gf 
+    3 1.180000e-01 # aS (Note that Parameter not used if you use a PDF set) 
+
+###################################
+## INFORMATION FOR TRIPCOUP
+###################################
+Block tripcoup 
+    4 6.000000e+00 # c3 
+
+###################################
+## INFORMATION FOR YUKAWA
+###################################
+Block yukawa 
+    5 4.700000e+00 # ymb 
+    6 1.730000e+02 # ymt 
+   15 1.777000e+00 # ymtau 
+
+###################################
+## INFORMATION FOR DECAY
+###################################
+DECAY   6 1.491500e+00 # WT 
+DECAY  23 2.441404e+00 # WZ 
+DECAY  24 2.047600e+00 # WW 
+DECAY  25 6.382339e-03 # WH 
+## Dependent parameters, given by model restrictions.
+## Those values should be edited following the 
+## analytical expression. MG5 ignores those values 
+## but they are important for interfacing the output of MG5
+## to external program such as Pythia.
+DECAY  1 0.000000e+00 # d : 0.0 
+DECAY  2 0.000000e+00 # u : 0.0 
+DECAY  3 0.000000e+00 # s : 0.0 
+DECAY  4 0.000000e+00 # c : 0.0 
+DECAY  5 0.000000e+00 # b : 0.0 
+DECAY  11 0.000000e+00 # e- : 0.0 
+DECAY  12 0.000000e+00 # ve : 0.0 
+DECAY  13 0.000000e+00 # mu- : 0.0 
+DECAY  14 0.000000e+00 # vm : 0.0 
+DECAY  15 0.000000e+00 # ta- : 0.0 
+DECAY  16 0.000000e+00 # vt : 0.0 
+DECAY  21 0.000000e+00 # g : 0.0 
+DECAY  22 0.000000e+00 # a : 0.0 
+#===========================================================
+# QUANTUM NUMBERS OF NEW STATE(S) (NON SM PDG CODE)
+#===========================================================
+
+Block QNUMBERS 82  # gh 
+        1 0  # 3 times electric charge
+        2 1  # number of spin states (2S+1)
+        3 8  # colour rep (1: singlet, 3: triplet, 8: octet)
+        4 1  # Particle/Antiparticle distinction (0=own anti)
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_6_d4_0/proc_card_mg5.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_6_d4_0/proc_card_mg5.dat
new file mode 100644
index 00000000000..db7d2dc28a4
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_6_d4_0/proc_card_mg5.dat
@@ -0,0 +1,42 @@
+#************************************************************
+#*                     MadGraph5_aMC@NLO                    *
+#*                                                          *
+#*                *                       *                 *
+#*                  *        * *        *                   *
+#*                    * * * * 5 * * * *                     *
+#*                  *        * *        *                   *
+#*                *                       *                 *
+#*                                                          *
+#*                                                          *
+#*         VERSION 2.9.18                2023-12-08         *
+#*                                                          *
+#*    The MadGraph5_aMC@NLO Development Team - Find us at   *
+#*    https://server06.fynu.ucl.ac.be/projects/madgraph     *
+#*                                                          *
+#************************************************************
+#*                                                          *
+#*               Command File for MadGraph5_aMC@NLO         *
+#*                                                          *
+#*     run as ./bin/mg5_aMC  filename                       *
+#*                                                          *
+#************************************************************
+set low_mem_multicore_nlo_generation False
+set gauge unitary
+set loop_color_flows False
+set max_npoint_for_channel 0
+set default_unset_couplings 99
+set max_t_for_channel 99
+set zerowidth_tchannel True
+set group_subprocesses Auto
+set ignore_six_quark_processes False
+set loop_optimized_output True
+set complex_mass_scheme False
+import model loop_sm_c3d4
+define p = g u c d s u~ c~ d~ s~
+define j = g u c d s u~ c~ d~ s~
+define l+ = e+ mu+
+define l- = e- mu-
+define vl = ve vm vt
+define vl~ = ve~ vm~ vt~
+generate p p > h h h [QCD]
+output GF_HHH_c3_0_d4_0 -nojpeg
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_6_d4_0/reweight_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_6_d4_0/reweight_card.dat
new file mode 100644
index 00000000000..c0529342fbc
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_6_d4_0/reweight_card.dat
@@ -0,0 +1,2 @@
+#*************************************************************************
+change rwgt_dir rwgt
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_6_d4_0/run_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_6_d4_0/run_card.dat
new file mode 100644
index 00000000000..869f39f5de7
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_6_d4_0/run_card.dat
@@ -0,0 +1,267 @@
+#*********************************************************************
+#                       MadGraph5_aMC@NLO                            *
+#                                                                    *
+#                     run_card.dat MadEvent                          *
+#                                                                    *
+#  This file is used to set the parameters of the run.               *
+#                                                                    *
+#  Some notation/conventions:                                        *
+#                                                                    *
+#   Lines starting with a '# ' are info or comments                  *
+#                                                                    *
+#   mind the format:   value    = variable     ! comment             *
+#                                                                    *
+#   To display more options, you can type the command:               *
+#      update to_full                                                *
+#*********************************************************************
+#                                                                    
+#*********************************************************************
+# Tag name for the run (one word)                                    *
+#*********************************************************************
+  tag_1	= run_tag ! name of the run 
+#*********************************************************************
+# Number of events and rnd seed                                      *
+# Warning: Do not generate more than 1M events in a single run       *
+#*********************************************************************
+  100000	= nevents ! Number of unweighted events requested 
+  0	= iseed ! rnd seed (0=assigned automatically=default))
+#*********************************************************************
+# Collider type and energy                                           *
+# lpp: 0=No PDF, 1=proton, -1=antiproton, 2=photon from proton,      *
+#                3=photon from electron, 4=photon from muon          *
+#*********************************************************************
+  1	= lpp1 ! beam 1 type 
+  1	= lpp2 ! beam 2 type
+  6800.0	= ebeam1 ! beam 1 total energy in GeV
+  6800.0	= ebeam2 ! beam 2 total energy in GeV
+
+#*********************************************************************
+# Beam polarization from -100 (left-handed) to 100 (right-handed)    *
+#*********************************************************************
+     0.0     = polbeam1 ! beam polarization for beam 1
+     0.0     = polbeam2 ! beam polarization for beam 2
+
+
+#*********************************************************************
+# PDF CHOICE: this automatically fixes also alpha_s and its evol.    *
+#*********************************************************************
+  lhapdf	= pdlabel ! PDF set                                     
+  325500	= lhaid ! if pdlabel=lhapdf, this is the lhapdf number
+# To see heavy ion options: type "update ion_pdf"
+#*********************************************************************
+# Renormalization and factorization scales                           *
+#*********************************************************************
+  False	= fixed_ren_scale ! if .true. use fixed ren scale
+  False	= fixed_fac_scale ! if .true. use fixed fac scale
+  91.188	= scale ! fixed ren scale
+  91.188	= dsqrt_q2fact1 ! fixed fact scale for pdf1
+  91.188	= dsqrt_q2fact2 ! fixed fact scale for pdf2
+  -1	= dynamical_scale_choice ! Choose one of the preselected dynamical choices
+  1.0	= scalefact ! scale factor for event-by-event scales
+#*********************************************************************
+# Type and output format
+#*********************************************************************
+  True	= gridpack !True = setting up the grid pack
+  -1.0	= time_of_flight ! threshold (in mm) below which the invariant livetime is not written (-1 means not written)
+  sum	= event_norm ! average/sum. Normalization of the weight in the LHEF
+
+#*********************************************************************
+# Matching parameter (MLM only)
+#*********************************************************************
+ 0 = ickkw            ! 0 no matching, 1 MLM
+ 1.0 = alpsfact         ! scale factor for QCD emission vx
+ False = chcluster        ! cluster only according to channel diag
+ 4 = asrwgtflavor     ! highest quark flavor for a_s reweight
+ True  = auto_ptj_mjj  ! Automatic setting of ptj and mjj if xqcut >0
+                                   ! (turn off for VBF and single top processes)
+ 0.0   = xqcut   ! minimum kt jet measure between partons
+
+
+#*********************************************************************
+#
+#*********************************************************************
+# Phase-Space Optimization strategy (basic options)
+#*********************************************************************
+  0	= nhel ! using helicities importance sampling or not.
+                             ! 0: sum over helicity, 1: importance sampling
+  2	= sde_strategy ! default integration strategy (hep-ph/2021.00773)
+                             ! 1 is old strategy (using amp square)
+			     ! 2 is new strategy (using only the denominator)
+# To see advanced option for Phase-Space optimization: type "update psoptim"			     
+#*********************************************************************
+# Generation bias, check the wiki page below for more information:   *
+#  'cp3.irmp.ucl.ac.be/projects/madgraph/wiki/LOEventGenerationBias' *
+#*********************************************************************
+  None	= bias_module ! Bias type of bias, [None, ptj_bias, -custom_folder-]
+  {}	= bias_parameters ! Specifies the parameters of the module.
+#
+#*******************************                                                 
+# Parton level cuts definition *
+#*******************************                                     
+#                                                                    
+#
+#*********************************************************************
+# BW cutoff (M+/-bwcutoff*Gamma) ! Define on/off-shell for "$" and decay  
+#*********************************************************************
+  15.0	= bwcutoff ! (M+/-bwcutoff*Gamma)
+#*********************************************************************
+# Standard Cuts                                                      *
+#*********************************************************************
+# Minimum and maximum pt's (for max, -1 means no cut)                *
+#*********************************************************************
+  {}	= pt_min_pdg ! pt cut for other particles (use pdg code). Applied on particle and anti-particle
+  {}	= pt_max_pdg ! pt cut for other particles (syntax e.g. {6: 100, 25: 50}) 
+
+#*********************************************************************
+# Minimum and maximum E's (in the center of mass frame)              *
+#*********************************************************************
+  0.0  = ej     ! minimum E for the jets
+  0.0  = eb     ! minimum E for the b
+  0.0  = ea     ! minimum E for the photons
+  0.0  = el     ! minimum E for the charged leptons
+  -1.0   = ejmax ! maximum E for the jets
+ -1.0   = ebmax ! maximum E for the b
+ -1.0   = eamax ! maximum E for the photons
+ -1.0   = elmax ! maximum E for the charged leptons
+ {} = e_min_pdg ! E cut for other particles (use pdg code). Applied on particle and anti-particle
+ {} = e_max_pdg ! E cut for other particles (syntax e.g. {6: 100, 25: 50})
+
+#*********************************************************************
+# Maximum and minimum absolute rapidity (for max, -1 means no cut)   *
+#*********************************************************************
+  {}	= eta_min_pdg ! rap cut for other particles (use pdg code). Applied on particle and anti-particle
+  {}	= eta_max_pdg ! rap cut for other particles (syntax e.g. {6: 2.5, 23: 5})
+#*********************************************************************
+# Minimum and maximum DeltaR distance                                *
+#*********************************************************************
+#*********************************************************************
+# Minimum and maximum invariant mass for pairs                       *
+#*********************************************************************
+  {}	= mxx_min_pdg ! min invariant mass of a pair of particles X/X~ (e.g. {6:250})
+  {'default': False}	= mxx_only_part_antipart ! if True the invariant mass is applied only 
+                       ! to pairs of particle/antiparticle and not to pairs of the same pdg codes.  
+#*********************************************************************
+# Inclusive cuts                                                     *
+#*********************************************************************
+  0.0	= ptheavy ! minimum pt for at least one heavy final state
+#*********************************************************************
+# maximal pdg code for quark to be considered as a light jet         *
+# (otherwise b cuts are applied)                                     *
+#*********************************************************************
+  4	= maxjetflavor ! Maximum jet pdg code
+#*********************************************************************
+#
+#*********************************************************************
+# Store info for systematics studies                                 *
+# WARNING: Do not use for interference type of computation           *
+#*********************************************************************
+  True	= use_syst ! Enable systematics studies
+#
+  None	= systematics_program ! none, systematics [python], SysCalc [depreceted, C++]
+  ['--mur=0.5,1,2', '--muf=0.5,1,2', '--pdf=errorset']	= systematics_arguments ! see: https://cp3.irmp.ucl.ac.be/projects/madgraph/wiki/Systematics#Systematicspythonmodule
+# Syscalc is deprecated but to see the associate options type'update syscalc'
+#***********************************************************************
+# Turn on either the ktdurham or ptlund cut to activate                *
+# CKKW(L) merging with Pythia8 [arXiv:1410.3012, arXiv:1109.4829]      *
+#***********************************************************************
+ -1.0  =  ktdurham
+ 0.4   =  dparameter
+ -1.0  =  ptlund
+ 21, 1, 2, 3, 4, 5, 6  =  pdgs_for_merging_cut ! PDGs for two cuts above
+#********************************************************************* 
+#  Additional hidden parameters
+#*********************************************************************
+  1	= ktscheme # hidden_parameter
+  0.4	= draa # hidden_parameter
+  -1.0	= ptamax # hidden_parameter
+  2.5	= etal # hidden_parameter
+  0.0	= ht4min # hidden_parameter
+  0.0	= ptl4min # hidden_parameter
+  True	= isoem # hidden_parameter
+  -1.0	= mmbbmax # hidden_parameter
+  0.0	= ptj4min # hidden_parameter
+  0.4	= dral # hidden_parameter
+  -1.0	= drajmax # hidden_parameter
+  -1.0	= drabmax # hidden_parameter
+  0.0	= misset # hidden_parameter
+  0.4	= draj # hidden_parameter
+  -1.0	= ptj3max # hidden_parameter
+  -1.0	= ptl4max # hidden_parameter
+  -1.0	= drblmax # hidden_parameter
+  -1.0	= drjlmax # hidden_parameter
+  0.0	= xptb # hidden_parameter
+  -1.0	= drllmax # hidden_parameter
+  0.0	= drab # hidden_parameter
+  0.0	= ht2min # hidden_parameter
+  0.0	= ptj1min # hidden_parameter
+  0.0	= etalmin # hidden_parameter
+  0.0	= mmbb # hidden_parameter
+  -1.0	= ptj4max # hidden_parameter
+  -1.0	= ptllmax # hidden_parameter
+  1.0	= ptl # hidden_parameter
+  0.0	= ptl1min # hidden_parameter
+  2.0	= ptj # hidden_parameter
+  -1.0	= mmllmax # hidden_parameter
+  0	= cutuse # hidden_parameter
+  0.0	= xptj # hidden_parameter
+  0.0	= drbl # hidden_parameter
+  1.0	= pta # hidden_parameter
+  0.0	= ptj3min # hidden_parameter
+  10.0	= etaj # hidden_parameter
+  0.0	= ptllmin # hidden_parameter
+  -1.0	= ptl2max # hidden_parameter
+  -1.0	= etab # hidden_parameter
+  0.4	= drjl # hidden_parameter
+  -1.0	= ptbmax # hidden_parameter
+  0.0	= ptj2min # hidden_parameter
+  -1.0	= ptl3max # hidden_parameter
+  -1.0	= ptj1max # hidden_parameter
+  -1.0	= dralmax # hidden_parameter
+  -1.0	= mmaamax # hidden_parameter
+  -1.0	= ptlmax # hidden_parameter
+  -1.0	= missetmax # hidden_parameter
+  0.0	= xptl # hidden_parameter
+  -1.0	= ptl1max # hidden_parameter
+  0.4	= r0gamma # hidden_parameter
+  0.0	= drbj # hidden_parameter
+  True	= clusinfo # hidden_parameter
+  1.0	= xn # hidden_parameter
+  -1.0	= drbjmax # hidden_parameter
+  True	= pdfwgt # hidden_parameter
+  2.5	= etaa # hidden_parameter
+  -1.0	= ptjmax # hidden_parameter
+  0.4	= drll # hidden_parameter
+  -1.0	= mmnlmax # hidden_parameter
+  -1.0	= ihtmax # hidden_parameter
+  -1.0	= htjmax # hidden_parameter
+  -1.0	= ptj2max # hidden_parameter
+  0.0	= ptb # hidden_parameter
+  0.0	= ptl2min # hidden_parameter
+  0.0	= ptl3min # hidden_parameter
+  -1.0	= ht3max # hidden_parameter
+  1	= highestmult # hidden_parameter
+  -1.0	= mmjjmax # hidden_parameter
+  -1.0	= ht2max # hidden_parameter
+  3.0	= lhe_version # hidden_parameter
+  0.0	= drbb # hidden_parameter
+  0.0	= htjmin # hidden_parameter
+  -1.0	= draamax # hidden_parameter
+  0.0	= etaamin # hidden_parameter
+  0.0	= xetamin # hidden_parameter
+  0.4	= drjj # hidden_parameter
+  0.0	= deltaeta # hidden_parameter
+  -1.0	= ht4max # hidden_parameter
+  0.0	= mmjj # hidden_parameter
+  0.0	= ptgmin # hidden_parameter
+  0.0	= ihtmin # hidden_parameter
+  0.0	= etabmin # hidden_parameter
+  0.0	= mmnl # hidden_parameter
+  -1.0	= drjjmax # hidden_parameter
+  False	= cut_decays # hidden_parameter
+  0.0	= mmll # hidden_parameter
+  -1.0	= drbbmax # hidden_parameter
+  0.0	= mmaa # hidden_parameter
+  0.0	= etajmin # hidden_parameter
+  0.0	= ht3min # hidden_parameter
+  1.0	= epsgamma # hidden_parameter
+  0.0	= xpta # hidden_parameter
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_m9_d4_m200/param_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_m9_d4_m200/param_card.dat
new file mode 100644
index 00000000000..647bc6958c8
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_m9_d4_m200/param_card.dat
@@ -0,0 +1,99 @@
+######################################################################
+## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL   ####
+######################################################################
+##                                                                  ##
+##  Width set on Auto will be computed following the information    ##
+##        present in the decay.py files of the model.               ##
+##        See  arXiv:1402.1178 for more details.                    ##
+##                                                                  ##
+######################################################################
+
+###################################
+## INFORMATION FOR MASS
+###################################
+Block mass 
+    5 4.700000e+00 # MB 
+    6 1.730000e+02 # MT 
+   15 1.777000e+00 # MTA 
+   23 9.118800e+01 # MZ 
+   25 1.250000e+02 # MH 
+## Dependent parameters, given by model restrictions.
+## Those values should be edited following the 
+## analytical expression. MG5 ignores those values 
+## but they are important for interfacing the output of MG5
+## to external program such as Pythia.
+  1 0.000000e+00 # d : 0.0 
+  2 0.000000e+00 # u : 0.0 
+  3 0.000000e+00 # s : 0.0 
+  4 0.000000e+00 # c : 0.0 
+  11 0.000000e+00 # e- : 0.0 
+  12 0.000000e+00 # ve : 0.0 
+  13 0.000000e+00 # mu- : 0.0 
+  14 0.000000e+00 # vm : 0.0 
+  16 0.000000e+00 # vt : 0.0 
+  21 0.000000e+00 # g : 0.0 
+  22 0.000000e+00 # a : 0.0 
+  24 8.041900e+01 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4. - (aEW*cmath.pi*MZ__exp__2)/(Gf*sqrt__2))) 
+
+###################################
+## INFORMATION FOR QUARTCOUP
+###################################
+Block quartcoup 
+    6 -200.000000e+00 # d4 
+
+###################################
+## INFORMATION FOR SMINPUTS
+###################################
+Block sminputs 
+    1 1.325070e+02 # aEWM1 
+    2 1.166390e-05 # Gf 
+    3 1.180000e-01 # aS (Note that Parameter not used if you use a PDF set) 
+
+###################################
+## INFORMATION FOR TRIPCOUP
+###################################
+Block tripcoup 
+    4 -9.000000e+00 # c3 
+
+###################################
+## INFORMATION FOR YUKAWA
+###################################
+Block yukawa 
+    5 4.700000e+00 # ymb 
+    6 1.730000e+02 # ymt 
+   15 1.777000e+00 # ymtau 
+
+###################################
+## INFORMATION FOR DECAY
+###################################
+DECAY   6 1.491500e+00 # WT 
+DECAY  23 2.441404e+00 # WZ 
+DECAY  24 2.047600e+00 # WW 
+DECAY  25 6.382339e-03 # WH 
+## Dependent parameters, given by model restrictions.
+## Those values should be edited following the 
+## analytical expression. MG5 ignores those values 
+## but they are important for interfacing the output of MG5
+## to external program such as Pythia.
+DECAY  1 0.000000e+00 # d : 0.0 
+DECAY  2 0.000000e+00 # u : 0.0 
+DECAY  3 0.000000e+00 # s : 0.0 
+DECAY  4 0.000000e+00 # c : 0.0 
+DECAY  5 0.000000e+00 # b : 0.0 
+DECAY  11 0.000000e+00 # e- : 0.0 
+DECAY  12 0.000000e+00 # ve : 0.0 
+DECAY  13 0.000000e+00 # mu- : 0.0 
+DECAY  14 0.000000e+00 # vm : 0.0 
+DECAY  15 0.000000e+00 # ta- : 0.0 
+DECAY  16 0.000000e+00 # vt : 0.0 
+DECAY  21 0.000000e+00 # g : 0.0 
+DECAY  22 0.000000e+00 # a : 0.0 
+#===========================================================
+# QUANTUM NUMBERS OF NEW STATE(S) (NON SM PDG CODE)
+#===========================================================
+
+Block QNUMBERS 82  # gh 
+        1 0  # 3 times electric charge
+        2 1  # number of spin states (2S+1)
+        3 8  # colour rep (1: singlet, 3: triplet, 8: octet)
+        4 1  # Particle/Antiparticle distinction (0=own anti)
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_m9_d4_m200/proc_card_mg5.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_m9_d4_m200/proc_card_mg5.dat
new file mode 100644
index 00000000000..db7d2dc28a4
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_m9_d4_m200/proc_card_mg5.dat
@@ -0,0 +1,42 @@
+#************************************************************
+#*                     MadGraph5_aMC@NLO                    *
+#*                                                          *
+#*                *                       *                 *
+#*                  *        * *        *                   *
+#*                    * * * * 5 * * * *                     *
+#*                  *        * *        *                   *
+#*                *                       *                 *
+#*                                                          *
+#*                                                          *
+#*         VERSION 2.9.18                2023-12-08         *
+#*                                                          *
+#*    The MadGraph5_aMC@NLO Development Team - Find us at   *
+#*    https://server06.fynu.ucl.ac.be/projects/madgraph     *
+#*                                                          *
+#************************************************************
+#*                                                          *
+#*               Command File for MadGraph5_aMC@NLO         *
+#*                                                          *
+#*     run as ./bin/mg5_aMC  filename                       *
+#*                                                          *
+#************************************************************
+set low_mem_multicore_nlo_generation False
+set gauge unitary
+set loop_color_flows False
+set max_npoint_for_channel 0
+set default_unset_couplings 99
+set max_t_for_channel 99
+set zerowidth_tchannel True
+set group_subprocesses Auto
+set ignore_six_quark_processes False
+set loop_optimized_output True
+set complex_mass_scheme False
+import model loop_sm_c3d4
+define p = g u c d s u~ c~ d~ s~
+define j = g u c d s u~ c~ d~ s~
+define l+ = e+ mu+
+define l- = e- mu-
+define vl = ve vm vt
+define vl~ = ve~ vm~ vt~
+generate p p > h h h [QCD]
+output GF_HHH_c3_0_d4_0 -nojpeg
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_m9_d4_m200/reweight_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_m9_d4_m200/reweight_card.dat
new file mode 100644
index 00000000000..c0529342fbc
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_m9_d4_m200/reweight_card.dat
@@ -0,0 +1,2 @@
+#*************************************************************************
+change rwgt_dir rwgt
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_m9_d4_m200/run_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_m9_d4_m200/run_card.dat
new file mode 100644
index 00000000000..869f39f5de7
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3_m9_d4_m200/run_card.dat
@@ -0,0 +1,267 @@
+#*********************************************************************
+#                       MadGraph5_aMC@NLO                            *
+#                                                                    *
+#                     run_card.dat MadEvent                          *
+#                                                                    *
+#  This file is used to set the parameters of the run.               *
+#                                                                    *
+#  Some notation/conventions:                                        *
+#                                                                    *
+#   Lines starting with a '# ' are info or comments                  *
+#                                                                    *
+#   mind the format:   value    = variable     ! comment             *
+#                                                                    *
+#   To display more options, you can type the command:               *
+#      update to_full                                                *
+#*********************************************************************
+#                                                                    
+#*********************************************************************
+# Tag name for the run (one word)                                    *
+#*********************************************************************
+  tag_1	= run_tag ! name of the run 
+#*********************************************************************
+# Number of events and rnd seed                                      *
+# Warning: Do not generate more than 1M events in a single run       *
+#*********************************************************************
+  100000	= nevents ! Number of unweighted events requested 
+  0	= iseed ! rnd seed (0=assigned automatically=default))
+#*********************************************************************
+# Collider type and energy                                           *
+# lpp: 0=No PDF, 1=proton, -1=antiproton, 2=photon from proton,      *
+#                3=photon from electron, 4=photon from muon          *
+#*********************************************************************
+  1	= lpp1 ! beam 1 type 
+  1	= lpp2 ! beam 2 type
+  6800.0	= ebeam1 ! beam 1 total energy in GeV
+  6800.0	= ebeam2 ! beam 2 total energy in GeV
+
+#*********************************************************************
+# Beam polarization from -100 (left-handed) to 100 (right-handed)    *
+#*********************************************************************
+     0.0     = polbeam1 ! beam polarization for beam 1
+     0.0     = polbeam2 ! beam polarization for beam 2
+
+
+#*********************************************************************
+# PDF CHOICE: this automatically fixes also alpha_s and its evol.    *
+#*********************************************************************
+  lhapdf	= pdlabel ! PDF set                                     
+  325500	= lhaid ! if pdlabel=lhapdf, this is the lhapdf number
+# To see heavy ion options: type "update ion_pdf"
+#*********************************************************************
+# Renormalization and factorization scales                           *
+#*********************************************************************
+  False	= fixed_ren_scale ! if .true. use fixed ren scale
+  False	= fixed_fac_scale ! if .true. use fixed fac scale
+  91.188	= scale ! fixed ren scale
+  91.188	= dsqrt_q2fact1 ! fixed fact scale for pdf1
+  91.188	= dsqrt_q2fact2 ! fixed fact scale for pdf2
+  -1	= dynamical_scale_choice ! Choose one of the preselected dynamical choices
+  1.0	= scalefact ! scale factor for event-by-event scales
+#*********************************************************************
+# Type and output format
+#*********************************************************************
+  True	= gridpack !True = setting up the grid pack
+  -1.0	= time_of_flight ! threshold (in mm) below which the invariant livetime is not written (-1 means not written)
+  sum	= event_norm ! average/sum. Normalization of the weight in the LHEF
+
+#*********************************************************************
+# Matching parameter (MLM only)
+#*********************************************************************
+ 0 = ickkw            ! 0 no matching, 1 MLM
+ 1.0 = alpsfact         ! scale factor for QCD emission vx
+ False = chcluster        ! cluster only according to channel diag
+ 4 = asrwgtflavor     ! highest quark flavor for a_s reweight
+ True  = auto_ptj_mjj  ! Automatic setting of ptj and mjj if xqcut >0
+                                   ! (turn off for VBF and single top processes)
+ 0.0   = xqcut   ! minimum kt jet measure between partons
+
+
+#*********************************************************************
+#
+#*********************************************************************
+# Phase-Space Optimization strategy (basic options)
+#*********************************************************************
+  0	= nhel ! using helicities importance sampling or not.
+                             ! 0: sum over helicity, 1: importance sampling
+  2	= sde_strategy ! default integration strategy (hep-ph/2021.00773)
+                             ! 1 is old strategy (using amp square)
+			     ! 2 is new strategy (using only the denominator)
+# To see advanced option for Phase-Space optimization: type "update psoptim"			     
+#*********************************************************************
+# Generation bias, check the wiki page below for more information:   *
+#  'cp3.irmp.ucl.ac.be/projects/madgraph/wiki/LOEventGenerationBias' *
+#*********************************************************************
+  None	= bias_module ! Bias type of bias, [None, ptj_bias, -custom_folder-]
+  {}	= bias_parameters ! Specifies the parameters of the module.
+#
+#*******************************                                                 
+# Parton level cuts definition *
+#*******************************                                     
+#                                                                    
+#
+#*********************************************************************
+# BW cutoff (M+/-bwcutoff*Gamma) ! Define on/off-shell for "$" and decay  
+#*********************************************************************
+  15.0	= bwcutoff ! (M+/-bwcutoff*Gamma)
+#*********************************************************************
+# Standard Cuts                                                      *
+#*********************************************************************
+# Minimum and maximum pt's (for max, -1 means no cut)                *
+#*********************************************************************
+  {}	= pt_min_pdg ! pt cut for other particles (use pdg code). Applied on particle and anti-particle
+  {}	= pt_max_pdg ! pt cut for other particles (syntax e.g. {6: 100, 25: 50}) 
+
+#*********************************************************************
+# Minimum and maximum E's (in the center of mass frame)              *
+#*********************************************************************
+  0.0  = ej     ! minimum E for the jets
+  0.0  = eb     ! minimum E for the b
+  0.0  = ea     ! minimum E for the photons
+  0.0  = el     ! minimum E for the charged leptons
+  -1.0   = ejmax ! maximum E for the jets
+ -1.0   = ebmax ! maximum E for the b
+ -1.0   = eamax ! maximum E for the photons
+ -1.0   = elmax ! maximum E for the charged leptons
+ {} = e_min_pdg ! E cut for other particles (use pdg code). Applied on particle and anti-particle
+ {} = e_max_pdg ! E cut for other particles (syntax e.g. {6: 100, 25: 50})
+
+#*********************************************************************
+# Maximum and minimum absolute rapidity (for max, -1 means no cut)   *
+#*********************************************************************
+  {}	= eta_min_pdg ! rap cut for other particles (use pdg code). Applied on particle and anti-particle
+  {}	= eta_max_pdg ! rap cut for other particles (syntax e.g. {6: 2.5, 23: 5})
+#*********************************************************************
+# Minimum and maximum DeltaR distance                                *
+#*********************************************************************
+#*********************************************************************
+# Minimum and maximum invariant mass for pairs                       *
+#*********************************************************************
+  {}	= mxx_min_pdg ! min invariant mass of a pair of particles X/X~ (e.g. {6:250})
+  {'default': False}	= mxx_only_part_antipart ! if True the invariant mass is applied only 
+                       ! to pairs of particle/antiparticle and not to pairs of the same pdg codes.  
+#*********************************************************************
+# Inclusive cuts                                                     *
+#*********************************************************************
+  0.0	= ptheavy ! minimum pt for at least one heavy final state
+#*********************************************************************
+# maximal pdg code for quark to be considered as a light jet         *
+# (otherwise b cuts are applied)                                     *
+#*********************************************************************
+  4	= maxjetflavor ! Maximum jet pdg code
+#*********************************************************************
+#
+#*********************************************************************
+# Store info for systematics studies                                 *
+# WARNING: Do not use for interference type of computation           *
+#*********************************************************************
+  True	= use_syst ! Enable systematics studies
+#
+  None	= systematics_program ! none, systematics [python], SysCalc [depreceted, C++]
+  ['--mur=0.5,1,2', '--muf=0.5,1,2', '--pdf=errorset']	= systematics_arguments ! see: https://cp3.irmp.ucl.ac.be/projects/madgraph/wiki/Systematics#Systematicspythonmodule
+# Syscalc is deprecated but to see the associate options type'update syscalc'
+#***********************************************************************
+# Turn on either the ktdurham or ptlund cut to activate                *
+# CKKW(L) merging with Pythia8 [arXiv:1410.3012, arXiv:1109.4829]      *
+#***********************************************************************
+ -1.0  =  ktdurham
+ 0.4   =  dparameter
+ -1.0  =  ptlund
+ 21, 1, 2, 3, 4, 5, 6  =  pdgs_for_merging_cut ! PDGs for two cuts above
+#********************************************************************* 
+#  Additional hidden parameters
+#*********************************************************************
+  1	= ktscheme # hidden_parameter
+  0.4	= draa # hidden_parameter
+  -1.0	= ptamax # hidden_parameter
+  2.5	= etal # hidden_parameter
+  0.0	= ht4min # hidden_parameter
+  0.0	= ptl4min # hidden_parameter
+  True	= isoem # hidden_parameter
+  -1.0	= mmbbmax # hidden_parameter
+  0.0	= ptj4min # hidden_parameter
+  0.4	= dral # hidden_parameter
+  -1.0	= drajmax # hidden_parameter
+  -1.0	= drabmax # hidden_parameter
+  0.0	= misset # hidden_parameter
+  0.4	= draj # hidden_parameter
+  -1.0	= ptj3max # hidden_parameter
+  -1.0	= ptl4max # hidden_parameter
+  -1.0	= drblmax # hidden_parameter
+  -1.0	= drjlmax # hidden_parameter
+  0.0	= xptb # hidden_parameter
+  -1.0	= drllmax # hidden_parameter
+  0.0	= drab # hidden_parameter
+  0.0	= ht2min # hidden_parameter
+  0.0	= ptj1min # hidden_parameter
+  0.0	= etalmin # hidden_parameter
+  0.0	= mmbb # hidden_parameter
+  -1.0	= ptj4max # hidden_parameter
+  -1.0	= ptllmax # hidden_parameter
+  1.0	= ptl # hidden_parameter
+  0.0	= ptl1min # hidden_parameter
+  2.0	= ptj # hidden_parameter
+  -1.0	= mmllmax # hidden_parameter
+  0	= cutuse # hidden_parameter
+  0.0	= xptj # hidden_parameter
+  0.0	= drbl # hidden_parameter
+  1.0	= pta # hidden_parameter
+  0.0	= ptj3min # hidden_parameter
+  10.0	= etaj # hidden_parameter
+  0.0	= ptllmin # hidden_parameter
+  -1.0	= ptl2max # hidden_parameter
+  -1.0	= etab # hidden_parameter
+  0.4	= drjl # hidden_parameter
+  -1.0	= ptbmax # hidden_parameter
+  0.0	= ptj2min # hidden_parameter
+  -1.0	= ptl3max # hidden_parameter
+  -1.0	= ptj1max # hidden_parameter
+  -1.0	= dralmax # hidden_parameter
+  -1.0	= mmaamax # hidden_parameter
+  -1.0	= ptlmax # hidden_parameter
+  -1.0	= missetmax # hidden_parameter
+  0.0	= xptl # hidden_parameter
+  -1.0	= ptl1max # hidden_parameter
+  0.4	= r0gamma # hidden_parameter
+  0.0	= drbj # hidden_parameter
+  True	= clusinfo # hidden_parameter
+  1.0	= xn # hidden_parameter
+  -1.0	= drbjmax # hidden_parameter
+  True	= pdfwgt # hidden_parameter
+  2.5	= etaa # hidden_parameter
+  -1.0	= ptjmax # hidden_parameter
+  0.4	= drll # hidden_parameter
+  -1.0	= mmnlmax # hidden_parameter
+  -1.0	= ihtmax # hidden_parameter
+  -1.0	= htjmax # hidden_parameter
+  -1.0	= ptj2max # hidden_parameter
+  0.0	= ptb # hidden_parameter
+  0.0	= ptl2min # hidden_parameter
+  0.0	= ptl3min # hidden_parameter
+  -1.0	= ht3max # hidden_parameter
+  1	= highestmult # hidden_parameter
+  -1.0	= mmjjmax # hidden_parameter
+  -1.0	= ht2max # hidden_parameter
+  3.0	= lhe_version # hidden_parameter
+  0.0	= drbb # hidden_parameter
+  0.0	= htjmin # hidden_parameter
+  -1.0	= draamax # hidden_parameter
+  0.0	= etaamin # hidden_parameter
+  0.0	= xetamin # hidden_parameter
+  0.4	= drjj # hidden_parameter
+  0.0	= deltaeta # hidden_parameter
+  -1.0	= ht4max # hidden_parameter
+  0.0	= mmjj # hidden_parameter
+  0.0	= ptgmin # hidden_parameter
+  0.0	= ihtmin # hidden_parameter
+  0.0	= etabmin # hidden_parameter
+  0.0	= mmnl # hidden_parameter
+  -1.0	= drjjmax # hidden_parameter
+  False	= cut_decays # hidden_parameter
+  0.0	= mmll # hidden_parameter
+  -1.0	= drbbmax # hidden_parameter
+  0.0	= mmaa # hidden_parameter
+  0.0	= etajmin # hidden_parameter
+  0.0	= ht3min # hidden_parameter
+  1.0	= epsgamma # hidden_parameter
+  0.0	= xpta # hidden_parameter
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3d4reweight/param_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3d4reweight/param_card.dat
new file mode 100644
index 00000000000..1811570cdde
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3d4reweight/param_card.dat
@@ -0,0 +1,99 @@
+######################################################################
+## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL   ####
+######################################################################
+##                                                                  ##
+##  Width set on Auto will be computed following the information    ##
+##        present in the decay.py files of the model.               ##
+##        See  arXiv:1402.1178 for more details.                    ##
+##                                                                  ##
+######################################################################
+
+###################################
+## INFORMATION FOR MASS
+###################################
+Block mass 
+    5 4.700000e+00 # MB 
+    6 1.730000e+02 # MT 
+   15 1.777000e+00 # MTA 
+   23 9.118800e+01 # MZ 
+   25 1.250000e+02 # MH 
+## Dependent parameters, given by model restrictions.
+## Those values should be edited following the 
+## analytical expression. MG5 ignores those values 
+## but they are important for interfacing the output of MG5
+## to external program such as Pythia.
+  1 0.000000e+00 # d : 0.0 
+  2 0.000000e+00 # u : 0.0 
+  3 0.000000e+00 # s : 0.0 
+  4 0.000000e+00 # c : 0.0 
+  11 0.000000e+00 # e- : 0.0 
+  12 0.000000e+00 # ve : 0.0 
+  13 0.000000e+00 # mu- : 0.0 
+  14 0.000000e+00 # vm : 0.0 
+  16 0.000000e+00 # vt : 0.0 
+  21 0.000000e+00 # g : 0.0 
+  22 0.000000e+00 # a : 0.0 
+  24 8.041900e+01 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4. - (aEW*cmath.pi*MZ__exp__2)/(Gf*sqrt__2))) 
+
+###################################
+## INFORMATION FOR QUARTCOUP
+###################################
+Block quartcoup 
+    6 0.000000e+00 # d4 
+
+###################################
+## INFORMATION FOR SMINPUTS
+###################################
+Block sminputs 
+    1 1.325070e+02 # aEWM1 
+    2 1.166390e-05 # Gf 
+    3 1.180000e-01 # aS (Note that Parameter not used if you use a PDF set) 
+
+###################################
+## INFORMATION FOR TRIPCOUP
+###################################
+Block tripcoup 
+    4 0.000000e+00 # c3 
+
+###################################
+## INFORMATION FOR YUKAWA
+###################################
+Block yukawa 
+    5 4.700000e+00 # ymb 
+    6 1.730000e+02 # ymt 
+   15 1.777000e+00 # ymtau 
+
+###################################
+## INFORMATION FOR DECAY
+###################################
+DECAY   6 1.491500e+00 # WT 
+DECAY  23 2.441404e+00 # WZ 
+DECAY  24 2.047600e+00 # WW 
+DECAY  25 6.382339e-03 # WH 
+## Dependent parameters, given by model restrictions.
+## Those values should be edited following the 
+## analytical expression. MG5 ignores those values 
+## but they are important for interfacing the output of MG5
+## to external program such as Pythia.
+DECAY  1 0.000000e+00 # d : 0.0 
+DECAY  2 0.000000e+00 # u : 0.0 
+DECAY  3 0.000000e+00 # s : 0.0 
+DECAY  4 0.000000e+00 # c : 0.0 
+DECAY  5 0.000000e+00 # b : 0.0 
+DECAY  11 0.000000e+00 # e- : 0.0 
+DECAY  12 0.000000e+00 # ve : 0.0 
+DECAY  13 0.000000e+00 # mu- : 0.0 
+DECAY  14 0.000000e+00 # vm : 0.0 
+DECAY  15 0.000000e+00 # ta- : 0.0 
+DECAY  16 0.000000e+00 # vt : 0.0 
+DECAY  21 0.000000e+00 # g : 0.0 
+DECAY  22 0.000000e+00 # a : 0.0 
+#===========================================================
+# QUANTUM NUMBERS OF NEW STATE(S) (NON SM PDG CODE)
+#===========================================================
+
+Block QNUMBERS 82  # gh 
+        1 0  # 3 times electric charge
+        2 1  # number of spin states (2S+1)
+        3 8  # colour rep (1: singlet, 3: triplet, 8: octet)
+        4 1  # Particle/Antiparticle distinction (0=own anti)
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3d4reweight/proc_card_mg5.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3d4reweight/proc_card_mg5.dat
new file mode 100644
index 00000000000..db7d2dc28a4
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3d4reweight/proc_card_mg5.dat
@@ -0,0 +1,42 @@
+#************************************************************
+#*                     MadGraph5_aMC@NLO                    *
+#*                                                          *
+#*                *                       *                 *
+#*                  *        * *        *                   *
+#*                    * * * * 5 * * * *                     *
+#*                  *        * *        *                   *
+#*                *                       *                 *
+#*                                                          *
+#*                                                          *
+#*         VERSION 2.9.18                2023-12-08         *
+#*                                                          *
+#*    The MadGraph5_aMC@NLO Development Team - Find us at   *
+#*    https://server06.fynu.ucl.ac.be/projects/madgraph     *
+#*                                                          *
+#************************************************************
+#*                                                          *
+#*               Command File for MadGraph5_aMC@NLO         *
+#*                                                          *
+#*     run as ./bin/mg5_aMC  filename                       *
+#*                                                          *
+#************************************************************
+set low_mem_multicore_nlo_generation False
+set gauge unitary
+set loop_color_flows False
+set max_npoint_for_channel 0
+set default_unset_couplings 99
+set max_t_for_channel 99
+set zerowidth_tchannel True
+set group_subprocesses Auto
+set ignore_six_quark_processes False
+set loop_optimized_output True
+set complex_mass_scheme False
+import model loop_sm_c3d4
+define p = g u c d s u~ c~ d~ s~
+define j = g u c d s u~ c~ d~ s~
+define l+ = e+ mu+
+define l- = e- mu-
+define vl = ve vm vt
+define vl~ = ve~ vm~ vt~
+generate p p > h h h [QCD]
+output GF_HHH_c3_0_d4_0 -nojpeg
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3d4reweight/reweight_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3d4reweight/reweight_card.dat
new file mode 100644
index 00000000000..af330afd64b
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3d4reweight/reweight_card.dat
@@ -0,0 +1,927 @@
+#*************************************************************************
+# Reweight Card for HHH 2D parameter scan
+# c3: -30 to 30, 21 points
+# d4: -1000 to 1000, 11 points
+#*************************************************************************
+
+change rwgt_dir rwgt
+
+launch --rwgt_name=c3_-30.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 -30.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_-30.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 -30.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_-30.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 -30.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_-30.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 -30.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_-30.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 -30.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_-30.0_d4_0.0_ymt_173.0
+    set tripcoup 4 -30.0    # c3
+    set quartcoup 6 0.0   # d4
+
+launch --rwgt_name=c3_-30.0_d4_200.0_ymt_173.0
+    set tripcoup 4 -30.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_-30.0_d4_400.0_ymt_173.0
+    set tripcoup 4 -30.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_-30.0_d4_600.0_ymt_173.0
+    set tripcoup 4 -30.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_-30.0_d4_800.0_ymt_173.0
+    set tripcoup 4 -30.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_-30.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 -30.0    # c3
+    set quartcoup 6 1000.0   # d4
+
+launch --rwgt_name=c3_-27.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 -27.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_-27.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 -27.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_-27.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 -27.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_-27.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 -27.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_-27.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 -27.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_-27.0_d4_0.0_ymt_173.0
+    set tripcoup 4 -27.0    # c3
+    set quartcoup 6 0.0   # d4
+
+launch --rwgt_name=c3_-27.0_d4_200.0_ymt_173.0
+    set tripcoup 4 -27.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_-27.0_d4_400.0_ymt_173.0
+    set tripcoup 4 -27.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_-27.0_d4_600.0_ymt_173.0
+    set tripcoup 4 -27.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_-27.0_d4_800.0_ymt_173.0
+    set tripcoup 4 -27.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_-27.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 -27.0    # c3
+    set quartcoup 6 1000.0   # d4
+
+launch --rwgt_name=c3_-24.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 -24.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_-24.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 -24.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_-24.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 -24.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_-24.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 -24.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_-24.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 -24.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_-24.0_d4_0.0_ymt_173.0
+    set tripcoup 4 -24.0    # c3
+    set quartcoup 6 0.0   # d4
+
+launch --rwgt_name=c3_-24.0_d4_200.0_ymt_173.0
+    set tripcoup 4 -24.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_-24.0_d4_400.0_ymt_173.0
+    set tripcoup 4 -24.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_-24.0_d4_600.0_ymt_173.0
+    set tripcoup 4 -24.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_-24.0_d4_800.0_ymt_173.0
+    set tripcoup 4 -24.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_-24.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 -24.0    # c3
+    set quartcoup 6 1000.0   # d4
+
+launch --rwgt_name=c3_-21.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 -21.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_-21.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 -21.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_-21.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 -21.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_-21.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 -21.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_-21.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 -21.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_-21.0_d4_0.0_ymt_173.0
+    set tripcoup 4 -21.0    # c3
+    set quartcoup 6 0.0   # d4
+
+launch --rwgt_name=c3_-21.0_d4_200.0_ymt_173.0
+    set tripcoup 4 -21.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_-21.0_d4_400.0_ymt_173.0
+    set tripcoup 4 -21.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_-21.0_d4_600.0_ymt_173.0
+    set tripcoup 4 -21.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_-21.0_d4_800.0_ymt_173.0
+    set tripcoup 4 -21.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_-21.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 -21.0    # c3
+    set quartcoup 6 1000.0   # d4
+
+launch --rwgt_name=c3_-18.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 -18.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_-18.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 -18.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_-18.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 -18.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_-18.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 -18.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_-18.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 -18.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_-18.0_d4_0.0_ymt_173.0
+    set tripcoup 4 -18.0    # c3
+    set quartcoup 6 0.0   # d4
+
+launch --rwgt_name=c3_-18.0_d4_200.0_ymt_173.0
+    set tripcoup 4 -18.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_-18.0_d4_400.0_ymt_173.0
+    set tripcoup 4 -18.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_-18.0_d4_600.0_ymt_173.0
+    set tripcoup 4 -18.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_-18.0_d4_800.0_ymt_173.0
+    set tripcoup 4 -18.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_-18.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 -18.0    # c3
+    set quartcoup 6 1000.0   # d4
+
+launch --rwgt_name=c3_-15.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 -15.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_-15.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 -15.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_-15.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 -15.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_-15.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 -15.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_-15.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 -15.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_-15.0_d4_0.0_ymt_173.0
+    set tripcoup 4 -15.0    # c3
+    set quartcoup 6 0.0   # d4
+
+launch --rwgt_name=c3_-15.0_d4_200.0_ymt_173.0
+    set tripcoup 4 -15.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_-15.0_d4_400.0_ymt_173.0
+    set tripcoup 4 -15.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_-15.0_d4_600.0_ymt_173.0
+    set tripcoup 4 -15.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_-15.0_d4_800.0_ymt_173.0
+    set tripcoup 4 -15.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_-15.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 -15.0    # c3
+    set quartcoup 6 1000.0   # d4
+
+launch --rwgt_name=c3_-12.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 -12.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_-12.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 -12.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_-12.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 -12.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_-12.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 -12.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_-12.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 -12.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_-12.0_d4_0.0_ymt_173.0
+    set tripcoup 4 -12.0    # c3
+    set quartcoup 6 0.0   # d4
+
+launch --rwgt_name=c3_-12.0_d4_200.0_ymt_173.0
+    set tripcoup 4 -12.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_-12.0_d4_400.0_ymt_173.0
+    set tripcoup 4 -12.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_-12.0_d4_600.0_ymt_173.0
+    set tripcoup 4 -12.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_-12.0_d4_800.0_ymt_173.0
+    set tripcoup 4 -12.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_-12.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 -12.0    # c3
+    set quartcoup 6 1000.0   # d4
+
+launch --rwgt_name=c3_-9.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 -9.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_-9.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 -9.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_-9.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 -9.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_-9.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 -9.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_-9.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 -9.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_-9.0_d4_0.0_ymt_173.0
+    set tripcoup 4 -9.0    # c3
+    set quartcoup 6 0.0   # d4
+
+launch --rwgt_name=c3_-9.0_d4_200.0_ymt_173.0
+    set tripcoup 4 -9.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_-9.0_d4_400.0_ymt_173.0
+    set tripcoup 4 -9.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_-9.0_d4_600.0_ymt_173.0
+    set tripcoup 4 -9.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_-9.0_d4_800.0_ymt_173.0
+    set tripcoup 4 -9.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_-9.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 -9.0    # c3
+    set quartcoup 6 1000.0   # d4
+
+launch --rwgt_name=c3_-6.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 -6.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_-6.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 -6.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_-6.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 -6.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_-6.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 -6.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_-6.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 -6.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_-6.0_d4_0.0_ymt_173.0
+    set tripcoup 4 -6.0    # c3
+    set quartcoup 6 0.0   # d4
+
+launch --rwgt_name=c3_-6.0_d4_200.0_ymt_173.0
+    set tripcoup 4 -6.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_-6.0_d4_400.0_ymt_173.0
+    set tripcoup 4 -6.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_-6.0_d4_600.0_ymt_173.0
+    set tripcoup 4 -6.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_-6.0_d4_800.0_ymt_173.0
+    set tripcoup 4 -6.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_-6.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 -6.0    # c3
+    set quartcoup 6 1000.0   # d4
+
+launch --rwgt_name=c3_-3.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 -3.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_-3.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 -3.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_-3.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 -3.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_-3.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 -3.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_-3.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 -3.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_-3.0_d4_0.0_ymt_173.0
+    set tripcoup 4 -3.0    # c3
+    set quartcoup 6 0.0   # d4
+
+launch --rwgt_name=c3_-3.0_d4_200.0_ymt_173.0
+    set tripcoup 4 -3.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_-3.0_d4_400.0_ymt_173.0
+    set tripcoup 4 -3.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_-3.0_d4_600.0_ymt_173.0
+    set tripcoup 4 -3.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_-3.0_d4_800.0_ymt_173.0
+    set tripcoup 4 -3.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_-3.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 -3.0    # c3
+    set quartcoup 6 1000.0   # d4
+
+launch --rwgt_name=c3_0.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 0.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_0.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 0.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_0.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 0.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_0.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 0.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_0.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 0.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_0.0_d4_200.0_ymt_173.0
+    set tripcoup 4 0.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_0.0_d4_400.0_ymt_173.0
+    set tripcoup 4 0.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_0.0_d4_600.0_ymt_173.0
+    set tripcoup 4 0.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_0.0_d4_800.0_ymt_173.0
+    set tripcoup 4 0.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_0.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 0.0    # c3
+    set quartcoup 6 1000.0   # d4
+
+launch --rwgt_name=c3_3.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 3.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_3.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 3.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_3.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 3.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_3.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 3.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_3.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 3.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_3.0_d4_0.0_ymt_173.0
+    set tripcoup 4 3.0    # c3
+    set quartcoup 6 0.0   # d4
+
+launch --rwgt_name=c3_3.0_d4_200.0_ymt_173.0
+    set tripcoup 4 3.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_3.0_d4_400.0_ymt_173.0
+    set tripcoup 4 3.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_3.0_d4_600.0_ymt_173.0
+    set tripcoup 4 3.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_3.0_d4_800.0_ymt_173.0
+    set tripcoup 4 3.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_3.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 3.0    # c3
+    set quartcoup 6 1000.0   # d4
+
+launch --rwgt_name=c3_6.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 6.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_6.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 6.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_6.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 6.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_6.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 6.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_6.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 6.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_6.0_d4_0.0_ymt_173.0
+    set tripcoup 4 6.0    # c3
+    set quartcoup 6 0.0   # d4
+
+launch --rwgt_name=c3_6.0_d4_200.0_ymt_173.0
+    set tripcoup 4 6.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_6.0_d4_400.0_ymt_173.0
+    set tripcoup 4 6.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_6.0_d4_600.0_ymt_173.0
+    set tripcoup 4 6.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_6.0_d4_800.0_ymt_173.0
+    set tripcoup 4 6.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_6.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 6.0    # c3
+    set quartcoup 6 1000.0   # d4
+
+launch --rwgt_name=c3_9.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 9.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_9.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 9.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_9.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 9.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_9.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 9.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_9.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 9.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_9.0_d4_0.0_ymt_173.0
+    set tripcoup 4 9.0    # c3
+    set quartcoup 6 0.0   # d4
+
+launch --rwgt_name=c3_9.0_d4_200.0_ymt_173.0
+    set tripcoup 4 9.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_9.0_d4_400.0_ymt_173.0
+    set tripcoup 4 9.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_9.0_d4_600.0_ymt_173.0
+    set tripcoup 4 9.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_9.0_d4_800.0_ymt_173.0
+    set tripcoup 4 9.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_9.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 9.0    # c3
+    set quartcoup 6 1000.0   # d4
+
+launch --rwgt_name=c3_12.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 12.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_12.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 12.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_12.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 12.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_12.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 12.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_12.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 12.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_12.0_d4_0.0_ymt_173.0
+    set tripcoup 4 12.0    # c3
+    set quartcoup 6 0.0   # d4
+
+launch --rwgt_name=c3_12.0_d4_200.0_ymt_173.0
+    set tripcoup 4 12.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_12.0_d4_400.0_ymt_173.0
+    set tripcoup 4 12.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_12.0_d4_600.0_ymt_173.0
+    set tripcoup 4 12.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_12.0_d4_800.0_ymt_173.0
+    set tripcoup 4 12.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_12.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 12.0    # c3
+    set quartcoup 6 1000.0   # d4
+
+launch --rwgt_name=c3_15.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 15.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_15.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 15.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_15.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 15.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_15.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 15.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_15.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 15.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_15.0_d4_0.0_ymt_173.0
+    set tripcoup 4 15.0    # c3
+    set quartcoup 6 0.0   # d4
+
+launch --rwgt_name=c3_15.0_d4_200.0_ymt_173.0
+    set tripcoup 4 15.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_15.0_d4_400.0_ymt_173.0
+    set tripcoup 4 15.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_15.0_d4_600.0_ymt_173.0
+    set tripcoup 4 15.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_15.0_d4_800.0_ymt_173.0
+    set tripcoup 4 15.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_15.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 15.0    # c3
+    set quartcoup 6 1000.0   # d4
+
+launch --rwgt_name=c3_18.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 18.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_18.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 18.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_18.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 18.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_18.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 18.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_18.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 18.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_18.0_d4_0.0_ymt_173.0
+    set tripcoup 4 18.0    # c3
+    set quartcoup 6 0.0   # d4
+
+launch --rwgt_name=c3_18.0_d4_200.0_ymt_173.0
+    set tripcoup 4 18.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_18.0_d4_400.0_ymt_173.0
+    set tripcoup 4 18.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_18.0_d4_600.0_ymt_173.0
+    set tripcoup 4 18.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_18.0_d4_800.0_ymt_173.0
+    set tripcoup 4 18.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_18.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 18.0    # c3
+    set quartcoup 6 1000.0   # d4
+
+launch --rwgt_name=c3_21.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 21.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_21.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 21.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_21.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 21.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_21.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 21.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_21.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 21.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_21.0_d4_0.0_ymt_173.0
+    set tripcoup 4 21.0    # c3
+    set quartcoup 6 0.0   # d4
+
+launch --rwgt_name=c3_21.0_d4_200.0_ymt_173.0
+    set tripcoup 4 21.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_21.0_d4_400.0_ymt_173.0
+    set tripcoup 4 21.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_21.0_d4_600.0_ymt_173.0
+    set tripcoup 4 21.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_21.0_d4_800.0_ymt_173.0
+    set tripcoup 4 21.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_21.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 21.0    # c3
+    set quartcoup 6 1000.0   # d4
+
+launch --rwgt_name=c3_24.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 24.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_24.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 24.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_24.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 24.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_24.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 24.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_24.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 24.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_24.0_d4_0.0_ymt_173.0
+    set tripcoup 4 24.0    # c3
+    set quartcoup 6 0.0   # d4
+
+launch --rwgt_name=c3_24.0_d4_200.0_ymt_173.0
+    set tripcoup 4 24.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_24.0_d4_400.0_ymt_173.0
+    set tripcoup 4 24.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_24.0_d4_600.0_ymt_173.0
+    set tripcoup 4 24.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_24.0_d4_800.0_ymt_173.0
+    set tripcoup 4 24.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_24.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 24.0    # c3
+    set quartcoup 6 1000.0   # d4
+
+launch --rwgt_name=c3_27.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 27.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_27.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 27.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_27.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 27.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_27.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 27.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_27.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 27.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_27.0_d4_0.0_ymt_173.0
+    set tripcoup 4 27.0    # c3
+    set quartcoup 6 0.0   # d4
+
+launch --rwgt_name=c3_27.0_d4_200.0_ymt_173.0
+    set tripcoup 4 27.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_27.0_d4_400.0_ymt_173.0
+    set tripcoup 4 27.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_27.0_d4_600.0_ymt_173.0
+    set tripcoup 4 27.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_27.0_d4_800.0_ymt_173.0
+    set tripcoup 4 27.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_27.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 27.0    # c3
+    set quartcoup 6 1000.0   # d4
+
+launch --rwgt_name=c3_30.0_d4_-1000.0_ymt_173.0
+    set tripcoup 4 30.0    # c3
+    set quartcoup 6 -1000.0   # d4
+
+launch --rwgt_name=c3_30.0_d4_-800.0_ymt_173.0
+    set tripcoup 4 30.0    # c3
+    set quartcoup 6 -800.0   # d4
+
+launch --rwgt_name=c3_30.0_d4_-600.0_ymt_173.0
+    set tripcoup 4 30.0    # c3
+    set quartcoup 6 -600.0   # d4
+
+launch --rwgt_name=c3_30.0_d4_-400.0_ymt_173.0
+    set tripcoup 4 30.0    # c3
+    set quartcoup 6 -400.0   # d4
+
+launch --rwgt_name=c3_30.0_d4_-200.0_ymt_173.0
+    set tripcoup 4 30.0    # c3
+    set quartcoup 6 -200.0   # d4
+
+launch --rwgt_name=c3_30.0_d4_0.0_ymt_173.0
+    set tripcoup 4 30.0    # c3
+    set quartcoup 6 0.0   # d4
+
+launch --rwgt_name=c3_30.0_d4_200.0_ymt_173.0
+    set tripcoup 4 30.0    # c3
+    set quartcoup 6 200.0   # d4
+
+launch --rwgt_name=c3_30.0_d4_400.0_ymt_173.0
+    set tripcoup 4 30.0    # c3
+    set quartcoup 6 400.0   # d4
+
+launch --rwgt_name=c3_30.0_d4_600.0_ymt_173.0
+    set tripcoup 4 30.0    # c3
+    set quartcoup 6 600.0   # d4
+
+launch --rwgt_name=c3_30.0_d4_800.0_ymt_173.0
+    set tripcoup 4 30.0    # c3
+    set quartcoup 6 800.0   # d4
+
+launch --rwgt_name=c3_30.0_d4_1000.0_ymt_173.0
+    set tripcoup 4 30.0    # c3
+    set quartcoup 6 1000.0   # d4
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3d4reweight/run_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3d4reweight/run_card.dat
new file mode 100644
index 00000000000..869f39f5de7
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3d4reweight/run_card.dat
@@ -0,0 +1,267 @@
+#*********************************************************************
+#                       MadGraph5_aMC@NLO                            *
+#                                                                    *
+#                     run_card.dat MadEvent                          *
+#                                                                    *
+#  This file is used to set the parameters of the run.               *
+#                                                                    *
+#  Some notation/conventions:                                        *
+#                                                                    *
+#   Lines starting with a '# ' are info or comments                  *
+#                                                                    *
+#   mind the format:   value    = variable     ! comment             *
+#                                                                    *
+#   To display more options, you can type the command:               *
+#      update to_full                                                *
+#*********************************************************************
+#                                                                    
+#*********************************************************************
+# Tag name for the run (one word)                                    *
+#*********************************************************************
+  tag_1	= run_tag ! name of the run 
+#*********************************************************************
+# Number of events and rnd seed                                      *
+# Warning: Do not generate more than 1M events in a single run       *
+#*********************************************************************
+  100000	= nevents ! Number of unweighted events requested 
+  0	= iseed ! rnd seed (0=assigned automatically=default))
+#*********************************************************************
+# Collider type and energy                                           *
+# lpp: 0=No PDF, 1=proton, -1=antiproton, 2=photon from proton,      *
+#                3=photon from electron, 4=photon from muon          *
+#*********************************************************************
+  1	= lpp1 ! beam 1 type 
+  1	= lpp2 ! beam 2 type
+  6800.0	= ebeam1 ! beam 1 total energy in GeV
+  6800.0	= ebeam2 ! beam 2 total energy in GeV
+
+#*********************************************************************
+# Beam polarization from -100 (left-handed) to 100 (right-handed)    *
+#*********************************************************************
+     0.0     = polbeam1 ! beam polarization for beam 1
+     0.0     = polbeam2 ! beam polarization for beam 2
+
+
+#*********************************************************************
+# PDF CHOICE: this automatically fixes also alpha_s and its evol.    *
+#*********************************************************************
+  lhapdf	= pdlabel ! PDF set                                     
+  325500	= lhaid ! if pdlabel=lhapdf, this is the lhapdf number
+# To see heavy ion options: type "update ion_pdf"
+#*********************************************************************
+# Renormalization and factorization scales                           *
+#*********************************************************************
+  False	= fixed_ren_scale ! if .true. use fixed ren scale
+  False	= fixed_fac_scale ! if .true. use fixed fac scale
+  91.188	= scale ! fixed ren scale
+  91.188	= dsqrt_q2fact1 ! fixed fact scale for pdf1
+  91.188	= dsqrt_q2fact2 ! fixed fact scale for pdf2
+  -1	= dynamical_scale_choice ! Choose one of the preselected dynamical choices
+  1.0	= scalefact ! scale factor for event-by-event scales
+#*********************************************************************
+# Type and output format
+#*********************************************************************
+  True	= gridpack !True = setting up the grid pack
+  -1.0	= time_of_flight ! threshold (in mm) below which the invariant livetime is not written (-1 means not written)
+  sum	= event_norm ! average/sum. Normalization of the weight in the LHEF
+
+#*********************************************************************
+# Matching parameter (MLM only)
+#*********************************************************************
+ 0 = ickkw            ! 0 no matching, 1 MLM
+ 1.0 = alpsfact         ! scale factor for QCD emission vx
+ False = chcluster        ! cluster only according to channel diag
+ 4 = asrwgtflavor     ! highest quark flavor for a_s reweight
+ True  = auto_ptj_mjj  ! Automatic setting of ptj and mjj if xqcut >0
+                                   ! (turn off for VBF and single top processes)
+ 0.0   = xqcut   ! minimum kt jet measure between partons
+
+
+#*********************************************************************
+#
+#*********************************************************************
+# Phase-Space Optimization strategy (basic options)
+#*********************************************************************
+  0	= nhel ! using helicities importance sampling or not.
+                             ! 0: sum over helicity, 1: importance sampling
+  2	= sde_strategy ! default integration strategy (hep-ph/2021.00773)
+                             ! 1 is old strategy (using amp square)
+			     ! 2 is new strategy (using only the denominator)
+# To see advanced option for Phase-Space optimization: type "update psoptim"			     
+#*********************************************************************
+# Generation bias, check the wiki page below for more information:   *
+#  'cp3.irmp.ucl.ac.be/projects/madgraph/wiki/LOEventGenerationBias' *
+#*********************************************************************
+  None	= bias_module ! Bias type of bias, [None, ptj_bias, -custom_folder-]
+  {}	= bias_parameters ! Specifies the parameters of the module.
+#
+#*******************************                                                 
+# Parton level cuts definition *
+#*******************************                                     
+#                                                                    
+#
+#*********************************************************************
+# BW cutoff (M+/-bwcutoff*Gamma) ! Define on/off-shell for "$" and decay  
+#*********************************************************************
+  15.0	= bwcutoff ! (M+/-bwcutoff*Gamma)
+#*********************************************************************
+# Standard Cuts                                                      *
+#*********************************************************************
+# Minimum and maximum pt's (for max, -1 means no cut)                *
+#*********************************************************************
+  {}	= pt_min_pdg ! pt cut for other particles (use pdg code). Applied on particle and anti-particle
+  {}	= pt_max_pdg ! pt cut for other particles (syntax e.g. {6: 100, 25: 50}) 
+
+#*********************************************************************
+# Minimum and maximum E's (in the center of mass frame)              *
+#*********************************************************************
+  0.0  = ej     ! minimum E for the jets
+  0.0  = eb     ! minimum E for the b
+  0.0  = ea     ! minimum E for the photons
+  0.0  = el     ! minimum E for the charged leptons
+  -1.0   = ejmax ! maximum E for the jets
+ -1.0   = ebmax ! maximum E for the b
+ -1.0   = eamax ! maximum E for the photons
+ -1.0   = elmax ! maximum E for the charged leptons
+ {} = e_min_pdg ! E cut for other particles (use pdg code). Applied on particle and anti-particle
+ {} = e_max_pdg ! E cut for other particles (syntax e.g. {6: 100, 25: 50})
+
+#*********************************************************************
+# Maximum and minimum absolute rapidity (for max, -1 means no cut)   *
+#*********************************************************************
+  {}	= eta_min_pdg ! rap cut for other particles (use pdg code). Applied on particle and anti-particle
+  {}	= eta_max_pdg ! rap cut for other particles (syntax e.g. {6: 2.5, 23: 5})
+#*********************************************************************
+# Minimum and maximum DeltaR distance                                *
+#*********************************************************************
+#*********************************************************************
+# Minimum and maximum invariant mass for pairs                       *
+#*********************************************************************
+  {}	= mxx_min_pdg ! min invariant mass of a pair of particles X/X~ (e.g. {6:250})
+  {'default': False}	= mxx_only_part_antipart ! if True the invariant mass is applied only 
+                       ! to pairs of particle/antiparticle and not to pairs of the same pdg codes.  
+#*********************************************************************
+# Inclusive cuts                                                     *
+#*********************************************************************
+  0.0	= ptheavy ! minimum pt for at least one heavy final state
+#*********************************************************************
+# maximal pdg code for quark to be considered as a light jet         *
+# (otherwise b cuts are applied)                                     *
+#*********************************************************************
+  4	= maxjetflavor ! Maximum jet pdg code
+#*********************************************************************
+#
+#*********************************************************************
+# Store info for systematics studies                                 *
+# WARNING: Do not use for interference type of computation           *
+#*********************************************************************
+  True	= use_syst ! Enable systematics studies
+#
+  None	= systematics_program ! none, systematics [python], SysCalc [depreceted, C++]
+  ['--mur=0.5,1,2', '--muf=0.5,1,2', '--pdf=errorset']	= systematics_arguments ! see: https://cp3.irmp.ucl.ac.be/projects/madgraph/wiki/Systematics#Systematicspythonmodule
+# Syscalc is deprecated but to see the associate options type'update syscalc'
+#***********************************************************************
+# Turn on either the ktdurham or ptlund cut to activate                *
+# CKKW(L) merging with Pythia8 [arXiv:1410.3012, arXiv:1109.4829]      *
+#***********************************************************************
+ -1.0  =  ktdurham
+ 0.4   =  dparameter
+ -1.0  =  ptlund
+ 21, 1, 2, 3, 4, 5, 6  =  pdgs_for_merging_cut ! PDGs for two cuts above
+#********************************************************************* 
+#  Additional hidden parameters
+#*********************************************************************
+  1	= ktscheme # hidden_parameter
+  0.4	= draa # hidden_parameter
+  -1.0	= ptamax # hidden_parameter
+  2.5	= etal # hidden_parameter
+  0.0	= ht4min # hidden_parameter
+  0.0	= ptl4min # hidden_parameter
+  True	= isoem # hidden_parameter
+  -1.0	= mmbbmax # hidden_parameter
+  0.0	= ptj4min # hidden_parameter
+  0.4	= dral # hidden_parameter
+  -1.0	= drajmax # hidden_parameter
+  -1.0	= drabmax # hidden_parameter
+  0.0	= misset # hidden_parameter
+  0.4	= draj # hidden_parameter
+  -1.0	= ptj3max # hidden_parameter
+  -1.0	= ptl4max # hidden_parameter
+  -1.0	= drblmax # hidden_parameter
+  -1.0	= drjlmax # hidden_parameter
+  0.0	= xptb # hidden_parameter
+  -1.0	= drllmax # hidden_parameter
+  0.0	= drab # hidden_parameter
+  0.0	= ht2min # hidden_parameter
+  0.0	= ptj1min # hidden_parameter
+  0.0	= etalmin # hidden_parameter
+  0.0	= mmbb # hidden_parameter
+  -1.0	= ptj4max # hidden_parameter
+  -1.0	= ptllmax # hidden_parameter
+  1.0	= ptl # hidden_parameter
+  0.0	= ptl1min # hidden_parameter
+  2.0	= ptj # hidden_parameter
+  -1.0	= mmllmax # hidden_parameter
+  0	= cutuse # hidden_parameter
+  0.0	= xptj # hidden_parameter
+  0.0	= drbl # hidden_parameter
+  1.0	= pta # hidden_parameter
+  0.0	= ptj3min # hidden_parameter
+  10.0	= etaj # hidden_parameter
+  0.0	= ptllmin # hidden_parameter
+  -1.0	= ptl2max # hidden_parameter
+  -1.0	= etab # hidden_parameter
+  0.4	= drjl # hidden_parameter
+  -1.0	= ptbmax # hidden_parameter
+  0.0	= ptj2min # hidden_parameter
+  -1.0	= ptl3max # hidden_parameter
+  -1.0	= ptj1max # hidden_parameter
+  -1.0	= dralmax # hidden_parameter
+  -1.0	= mmaamax # hidden_parameter
+  -1.0	= ptlmax # hidden_parameter
+  -1.0	= missetmax # hidden_parameter
+  0.0	= xptl # hidden_parameter
+  -1.0	= ptl1max # hidden_parameter
+  0.4	= r0gamma # hidden_parameter
+  0.0	= drbj # hidden_parameter
+  True	= clusinfo # hidden_parameter
+  1.0	= xn # hidden_parameter
+  -1.0	= drbjmax # hidden_parameter
+  True	= pdfwgt # hidden_parameter
+  2.5	= etaa # hidden_parameter
+  -1.0	= ptjmax # hidden_parameter
+  0.4	= drll # hidden_parameter
+  -1.0	= mmnlmax # hidden_parameter
+  -1.0	= ihtmax # hidden_parameter
+  -1.0	= htjmax # hidden_parameter
+  -1.0	= ptj2max # hidden_parameter
+  0.0	= ptb # hidden_parameter
+  0.0	= ptl2min # hidden_parameter
+  0.0	= ptl3min # hidden_parameter
+  -1.0	= ht3max # hidden_parameter
+  1	= highestmult # hidden_parameter
+  -1.0	= mmjjmax # hidden_parameter
+  -1.0	= ht2max # hidden_parameter
+  3.0	= lhe_version # hidden_parameter
+  0.0	= drbb # hidden_parameter
+  0.0	= htjmin # hidden_parameter
+  -1.0	= draamax # hidden_parameter
+  0.0	= etaamin # hidden_parameter
+  0.0	= xetamin # hidden_parameter
+  0.4	= drjj # hidden_parameter
+  0.0	= deltaeta # hidden_parameter
+  -1.0	= ht4max # hidden_parameter
+  0.0	= mmjj # hidden_parameter
+  0.0	= ptgmin # hidden_parameter
+  0.0	= ihtmin # hidden_parameter
+  0.0	= etabmin # hidden_parameter
+  0.0	= mmnl # hidden_parameter
+  -1.0	= drjjmax # hidden_parameter
+  False	= cut_decays # hidden_parameter
+  0.0	= mmll # hidden_parameter
+  -1.0	= drbbmax # hidden_parameter
+  0.0	= mmaa # hidden_parameter
+  0.0	= etajmin # hidden_parameter
+  0.0	= ht3min # hidden_parameter
+  1.0	= epsgamma # hidden_parameter
+  0.0	= xpta # hidden_parameter
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3ktreweight/param_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3ktreweight/param_card.dat
new file mode 100644
index 00000000000..1811570cdde
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3ktreweight/param_card.dat
@@ -0,0 +1,99 @@
+######################################################################
+## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL   ####
+######################################################################
+##                                                                  ##
+##  Width set on Auto will be computed following the information    ##
+##        present in the decay.py files of the model.               ##
+##        See  arXiv:1402.1178 for more details.                    ##
+##                                                                  ##
+######################################################################
+
+###################################
+## INFORMATION FOR MASS
+###################################
+Block mass 
+    5 4.700000e+00 # MB 
+    6 1.730000e+02 # MT 
+   15 1.777000e+00 # MTA 
+   23 9.118800e+01 # MZ 
+   25 1.250000e+02 # MH 
+## Dependent parameters, given by model restrictions.
+## Those values should be edited following the 
+## analytical expression. MG5 ignores those values 
+## but they are important for interfacing the output of MG5
+## to external program such as Pythia.
+  1 0.000000e+00 # d : 0.0 
+  2 0.000000e+00 # u : 0.0 
+  3 0.000000e+00 # s : 0.0 
+  4 0.000000e+00 # c : 0.0 
+  11 0.000000e+00 # e- : 0.0 
+  12 0.000000e+00 # ve : 0.0 
+  13 0.000000e+00 # mu- : 0.0 
+  14 0.000000e+00 # vm : 0.0 
+  16 0.000000e+00 # vt : 0.0 
+  21 0.000000e+00 # g : 0.0 
+  22 0.000000e+00 # a : 0.0 
+  24 8.041900e+01 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4. - (aEW*cmath.pi*MZ__exp__2)/(Gf*sqrt__2))) 
+
+###################################
+## INFORMATION FOR QUARTCOUP
+###################################
+Block quartcoup 
+    6 0.000000e+00 # d4 
+
+###################################
+## INFORMATION FOR SMINPUTS
+###################################
+Block sminputs 
+    1 1.325070e+02 # aEWM1 
+    2 1.166390e-05 # Gf 
+    3 1.180000e-01 # aS (Note that Parameter not used if you use a PDF set) 
+
+###################################
+## INFORMATION FOR TRIPCOUP
+###################################
+Block tripcoup 
+    4 0.000000e+00 # c3 
+
+###################################
+## INFORMATION FOR YUKAWA
+###################################
+Block yukawa 
+    5 4.700000e+00 # ymb 
+    6 1.730000e+02 # ymt 
+   15 1.777000e+00 # ymtau 
+
+###################################
+## INFORMATION FOR DECAY
+###################################
+DECAY   6 1.491500e+00 # WT 
+DECAY  23 2.441404e+00 # WZ 
+DECAY  24 2.047600e+00 # WW 
+DECAY  25 6.382339e-03 # WH 
+## Dependent parameters, given by model restrictions.
+## Those values should be edited following the 
+## analytical expression. MG5 ignores those values 
+## but they are important for interfacing the output of MG5
+## to external program such as Pythia.
+DECAY  1 0.000000e+00 # d : 0.0 
+DECAY  2 0.000000e+00 # u : 0.0 
+DECAY  3 0.000000e+00 # s : 0.0 
+DECAY  4 0.000000e+00 # c : 0.0 
+DECAY  5 0.000000e+00 # b : 0.0 
+DECAY  11 0.000000e+00 # e- : 0.0 
+DECAY  12 0.000000e+00 # ve : 0.0 
+DECAY  13 0.000000e+00 # mu- : 0.0 
+DECAY  14 0.000000e+00 # vm : 0.0 
+DECAY  15 0.000000e+00 # ta- : 0.0 
+DECAY  16 0.000000e+00 # vt : 0.0 
+DECAY  21 0.000000e+00 # g : 0.0 
+DECAY  22 0.000000e+00 # a : 0.0 
+#===========================================================
+# QUANTUM NUMBERS OF NEW STATE(S) (NON SM PDG CODE)
+#===========================================================
+
+Block QNUMBERS 82  # gh 
+        1 0  # 3 times electric charge
+        2 1  # number of spin states (2S+1)
+        3 8  # colour rep (1: singlet, 3: triplet, 8: octet)
+        4 1  # Particle/Antiparticle distinction (0=own anti)
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3ktreweight/proc_card_mg5.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3ktreweight/proc_card_mg5.dat
new file mode 100644
index 00000000000..db7d2dc28a4
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3ktreweight/proc_card_mg5.dat
@@ -0,0 +1,42 @@
+#************************************************************
+#*                     MadGraph5_aMC@NLO                    *
+#*                                                          *
+#*                *                       *                 *
+#*                  *        * *        *                   *
+#*                    * * * * 5 * * * *                     *
+#*                  *        * *        *                   *
+#*                *                       *                 *
+#*                                                          *
+#*                                                          *
+#*         VERSION 2.9.18                2023-12-08         *
+#*                                                          *
+#*    The MadGraph5_aMC@NLO Development Team - Find us at   *
+#*    https://server06.fynu.ucl.ac.be/projects/madgraph     *
+#*                                                          *
+#************************************************************
+#*                                                          *
+#*               Command File for MadGraph5_aMC@NLO         *
+#*                                                          *
+#*     run as ./bin/mg5_aMC  filename                       *
+#*                                                          *
+#************************************************************
+set low_mem_multicore_nlo_generation False
+set gauge unitary
+set loop_color_flows False
+set max_npoint_for_channel 0
+set default_unset_couplings 99
+set max_t_for_channel 99
+set zerowidth_tchannel True
+set group_subprocesses Auto
+set ignore_six_quark_processes False
+set loop_optimized_output True
+set complex_mass_scheme False
+import model loop_sm_c3d4
+define p = g u c d s u~ c~ d~ s~
+define j = g u c d s u~ c~ d~ s~
+define l+ = e+ mu+
+define l- = e- mu-
+define vl = ve vm vt
+define vl~ = ve~ vm~ vt~
+generate p p > h h h [QCD]
+output GF_HHH_c3_0_d4_0 -nojpeg
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3ktreweight/reweight_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3ktreweight/reweight_card.dat
new file mode 100644
index 00000000000..100d13e2d70
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3ktreweight/reweight_card.dat
@@ -0,0 +1,927 @@
+#*************************************************************************
+# Reweight Card for HHH 2D parameter scan
+# c3: -30 to 30, 21 points
+# ymt: 86.5 to 259.5 (0.5x to 1.5x SM), 11 points
+#*************************************************************************
+
+change rwgt_dir rwgt
+
+launch --rwgt_name=c3_-30.0_d4_0.0_ymt_86.5
+    set tripcoup 4 -30.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_-30.0_d4_0.0_ymt_103.8
+    set tripcoup 4 -30.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_-30.0_d4_0.0_ymt_121.1
+    set tripcoup 4 -30.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_-30.0_d4_0.0_ymt_138.4
+    set tripcoup 4 -30.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_-30.0_d4_0.0_ymt_155.7
+    set tripcoup 4 -30.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_-30.0_d4_0.0_ymt_173.0
+    set tripcoup 4 -30.0    # c3
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_-30.0_d4_0.0_ymt_190.3
+    set tripcoup 4 -30.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_-30.0_d4_0.0_ymt_207.6
+    set tripcoup 4 -30.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_-30.0_d4_0.0_ymt_224.9
+    set tripcoup 4 -30.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_-30.0_d4_0.0_ymt_242.2
+    set tripcoup 4 -30.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_-30.0_d4_0.0_ymt_259.5
+    set tripcoup 4 -30.0    # c3
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_-27.0_d4_0.0_ymt_86.5
+    set tripcoup 4 -27.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_-27.0_d4_0.0_ymt_103.8
+    set tripcoup 4 -27.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_-27.0_d4_0.0_ymt_121.1
+    set tripcoup 4 -27.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_-27.0_d4_0.0_ymt_138.4
+    set tripcoup 4 -27.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_-27.0_d4_0.0_ymt_155.7
+    set tripcoup 4 -27.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_-27.0_d4_0.0_ymt_173.0
+    set tripcoup 4 -27.0    # c3
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_-27.0_d4_0.0_ymt_190.3
+    set tripcoup 4 -27.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_-27.0_d4_0.0_ymt_207.6
+    set tripcoup 4 -27.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_-27.0_d4_0.0_ymt_224.9
+    set tripcoup 4 -27.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_-27.0_d4_0.0_ymt_242.2
+    set tripcoup 4 -27.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_-27.0_d4_0.0_ymt_259.5
+    set tripcoup 4 -27.0    # c3
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_-24.0_d4_0.0_ymt_86.5
+    set tripcoup 4 -24.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_-24.0_d4_0.0_ymt_103.8
+    set tripcoup 4 -24.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_-24.0_d4_0.0_ymt_121.1
+    set tripcoup 4 -24.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_-24.0_d4_0.0_ymt_138.4
+    set tripcoup 4 -24.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_-24.0_d4_0.0_ymt_155.7
+    set tripcoup 4 -24.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_-24.0_d4_0.0_ymt_173.0
+    set tripcoup 4 -24.0    # c3
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_-24.0_d4_0.0_ymt_190.3
+    set tripcoup 4 -24.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_-24.0_d4_0.0_ymt_207.6
+    set tripcoup 4 -24.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_-24.0_d4_0.0_ymt_224.9
+    set tripcoup 4 -24.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_-24.0_d4_0.0_ymt_242.2
+    set tripcoup 4 -24.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_-24.0_d4_0.0_ymt_259.5
+    set tripcoup 4 -24.0    # c3
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_-21.0_d4_0.0_ymt_86.5
+    set tripcoup 4 -21.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_-21.0_d4_0.0_ymt_103.8
+    set tripcoup 4 -21.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_-21.0_d4_0.0_ymt_121.1
+    set tripcoup 4 -21.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_-21.0_d4_0.0_ymt_138.4
+    set tripcoup 4 -21.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_-21.0_d4_0.0_ymt_155.7
+    set tripcoup 4 -21.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_-21.0_d4_0.0_ymt_173.0
+    set tripcoup 4 -21.0    # c3
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_-21.0_d4_0.0_ymt_190.3
+    set tripcoup 4 -21.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_-21.0_d4_0.0_ymt_207.6
+    set tripcoup 4 -21.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_-21.0_d4_0.0_ymt_224.9
+    set tripcoup 4 -21.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_-21.0_d4_0.0_ymt_242.2
+    set tripcoup 4 -21.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_-21.0_d4_0.0_ymt_259.5
+    set tripcoup 4 -21.0    # c3
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_-18.0_d4_0.0_ymt_86.5
+    set tripcoup 4 -18.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_-18.0_d4_0.0_ymt_103.8
+    set tripcoup 4 -18.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_-18.0_d4_0.0_ymt_121.1
+    set tripcoup 4 -18.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_-18.0_d4_0.0_ymt_138.4
+    set tripcoup 4 -18.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_-18.0_d4_0.0_ymt_155.7
+    set tripcoup 4 -18.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_-18.0_d4_0.0_ymt_173.0
+    set tripcoup 4 -18.0    # c3
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_-18.0_d4_0.0_ymt_190.3
+    set tripcoup 4 -18.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_-18.0_d4_0.0_ymt_207.6
+    set tripcoup 4 -18.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_-18.0_d4_0.0_ymt_224.9
+    set tripcoup 4 -18.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_-18.0_d4_0.0_ymt_242.2
+    set tripcoup 4 -18.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_-18.0_d4_0.0_ymt_259.5
+    set tripcoup 4 -18.0    # c3
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_-15.0_d4_0.0_ymt_86.5
+    set tripcoup 4 -15.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_-15.0_d4_0.0_ymt_103.8
+    set tripcoup 4 -15.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_-15.0_d4_0.0_ymt_121.1
+    set tripcoup 4 -15.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_-15.0_d4_0.0_ymt_138.4
+    set tripcoup 4 -15.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_-15.0_d4_0.0_ymt_155.7
+    set tripcoup 4 -15.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_-15.0_d4_0.0_ymt_173.0
+    set tripcoup 4 -15.0    # c3
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_-15.0_d4_0.0_ymt_190.3
+    set tripcoup 4 -15.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_-15.0_d4_0.0_ymt_207.6
+    set tripcoup 4 -15.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_-15.0_d4_0.0_ymt_224.9
+    set tripcoup 4 -15.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_-15.0_d4_0.0_ymt_242.2
+    set tripcoup 4 -15.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_-15.0_d4_0.0_ymt_259.5
+    set tripcoup 4 -15.0    # c3
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_-12.0_d4_0.0_ymt_86.5
+    set tripcoup 4 -12.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_-12.0_d4_0.0_ymt_103.8
+    set tripcoup 4 -12.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_-12.0_d4_0.0_ymt_121.1
+    set tripcoup 4 -12.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_-12.0_d4_0.0_ymt_138.4
+    set tripcoup 4 -12.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_-12.0_d4_0.0_ymt_155.7
+    set tripcoup 4 -12.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_-12.0_d4_0.0_ymt_173.0
+    set tripcoup 4 -12.0    # c3
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_-12.0_d4_0.0_ymt_190.3
+    set tripcoup 4 -12.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_-12.0_d4_0.0_ymt_207.6
+    set tripcoup 4 -12.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_-12.0_d4_0.0_ymt_224.9
+    set tripcoup 4 -12.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_-12.0_d4_0.0_ymt_242.2
+    set tripcoup 4 -12.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_-12.0_d4_0.0_ymt_259.5
+    set tripcoup 4 -12.0    # c3
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_-9.0_d4_0.0_ymt_86.5
+    set tripcoup 4 -9.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_-9.0_d4_0.0_ymt_103.8
+    set tripcoup 4 -9.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_-9.0_d4_0.0_ymt_121.1
+    set tripcoup 4 -9.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_-9.0_d4_0.0_ymt_138.4
+    set tripcoup 4 -9.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_-9.0_d4_0.0_ymt_155.7
+    set tripcoup 4 -9.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_-9.0_d4_0.0_ymt_173.0
+    set tripcoup 4 -9.0    # c3
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_-9.0_d4_0.0_ymt_190.3
+    set tripcoup 4 -9.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_-9.0_d4_0.0_ymt_207.6
+    set tripcoup 4 -9.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_-9.0_d4_0.0_ymt_224.9
+    set tripcoup 4 -9.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_-9.0_d4_0.0_ymt_242.2
+    set tripcoup 4 -9.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_-9.0_d4_0.0_ymt_259.5
+    set tripcoup 4 -9.0    # c3
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_-6.0_d4_0.0_ymt_86.5
+    set tripcoup 4 -6.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_-6.0_d4_0.0_ymt_103.8
+    set tripcoup 4 -6.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_-6.0_d4_0.0_ymt_121.1
+    set tripcoup 4 -6.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_-6.0_d4_0.0_ymt_138.4
+    set tripcoup 4 -6.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_-6.0_d4_0.0_ymt_155.7
+    set tripcoup 4 -6.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_-6.0_d4_0.0_ymt_173.0
+    set tripcoup 4 -6.0    # c3
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_-6.0_d4_0.0_ymt_190.3
+    set tripcoup 4 -6.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_-6.0_d4_0.0_ymt_207.6
+    set tripcoup 4 -6.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_-6.0_d4_0.0_ymt_224.9
+    set tripcoup 4 -6.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_-6.0_d4_0.0_ymt_242.2
+    set tripcoup 4 -6.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_-6.0_d4_0.0_ymt_259.5
+    set tripcoup 4 -6.0    # c3
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_-3.0_d4_0.0_ymt_86.5
+    set tripcoup 4 -3.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_-3.0_d4_0.0_ymt_103.8
+    set tripcoup 4 -3.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_-3.0_d4_0.0_ymt_121.1
+    set tripcoup 4 -3.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_-3.0_d4_0.0_ymt_138.4
+    set tripcoup 4 -3.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_-3.0_d4_0.0_ymt_155.7
+    set tripcoup 4 -3.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_-3.0_d4_0.0_ymt_173.0
+    set tripcoup 4 -3.0    # c3
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_-3.0_d4_0.0_ymt_190.3
+    set tripcoup 4 -3.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_-3.0_d4_0.0_ymt_207.6
+    set tripcoup 4 -3.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_-3.0_d4_0.0_ymt_224.9
+    set tripcoup 4 -3.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_-3.0_d4_0.0_ymt_242.2
+    set tripcoup 4 -3.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_-3.0_d4_0.0_ymt_259.5
+    set tripcoup 4 -3.0    # c3
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_0.0_ymt_86.5
+    set tripcoup 4 0.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_0.0_ymt_103.8
+    set tripcoup 4 0.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_0.0_d4_0.0_ymt_121.1
+    set tripcoup 4 0.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_0.0_d4_0.0_ymt_138.4
+    set tripcoup 4 0.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_0.0_d4_0.0_ymt_155.7
+    set tripcoup 4 0.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_0.0_d4_0.0_ymt_190.3
+    set tripcoup 4 0.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_0.0_d4_0.0_ymt_207.6
+    set tripcoup 4 0.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_0.0_d4_0.0_ymt_224.9
+    set tripcoup 4 0.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_0.0_d4_0.0_ymt_242.2
+    set tripcoup 4 0.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_0.0_d4_0.0_ymt_259.5
+    set tripcoup 4 0.0    # c3
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_3.0_d4_0.0_ymt_86.5
+    set tripcoup 4 3.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_3.0_d4_0.0_ymt_103.8
+    set tripcoup 4 3.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_3.0_d4_0.0_ymt_121.1
+    set tripcoup 4 3.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_3.0_d4_0.0_ymt_138.4
+    set tripcoup 4 3.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_3.0_d4_0.0_ymt_155.7
+    set tripcoup 4 3.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_3.0_d4_0.0_ymt_173.0
+    set tripcoup 4 3.0    # c3
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_3.0_d4_0.0_ymt_190.3
+    set tripcoup 4 3.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_3.0_d4_0.0_ymt_207.6
+    set tripcoup 4 3.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_3.0_d4_0.0_ymt_224.9
+    set tripcoup 4 3.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_3.0_d4_0.0_ymt_242.2
+    set tripcoup 4 3.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_3.0_d4_0.0_ymt_259.5
+    set tripcoup 4 3.0    # c3
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_6.0_d4_0.0_ymt_86.5
+    set tripcoup 4 6.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_6.0_d4_0.0_ymt_103.8
+    set tripcoup 4 6.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_6.0_d4_0.0_ymt_121.1
+    set tripcoup 4 6.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_6.0_d4_0.0_ymt_138.4
+    set tripcoup 4 6.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_6.0_d4_0.0_ymt_155.7
+    set tripcoup 4 6.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_6.0_d4_0.0_ymt_173.0
+    set tripcoup 4 6.0    # c3
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_6.0_d4_0.0_ymt_190.3
+    set tripcoup 4 6.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_6.0_d4_0.0_ymt_207.6
+    set tripcoup 4 6.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_6.0_d4_0.0_ymt_224.9
+    set tripcoup 4 6.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_6.0_d4_0.0_ymt_242.2
+    set tripcoup 4 6.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_6.0_d4_0.0_ymt_259.5
+    set tripcoup 4 6.0    # c3
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_9.0_d4_0.0_ymt_86.5
+    set tripcoup 4 9.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_9.0_d4_0.0_ymt_103.8
+    set tripcoup 4 9.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_9.0_d4_0.0_ymt_121.1
+    set tripcoup 4 9.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_9.0_d4_0.0_ymt_138.4
+    set tripcoup 4 9.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_9.0_d4_0.0_ymt_155.7
+    set tripcoup 4 9.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_9.0_d4_0.0_ymt_173.0
+    set tripcoup 4 9.0    # c3
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_9.0_d4_0.0_ymt_190.3
+    set tripcoup 4 9.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_9.0_d4_0.0_ymt_207.6
+    set tripcoup 4 9.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_9.0_d4_0.0_ymt_224.9
+    set tripcoup 4 9.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_9.0_d4_0.0_ymt_242.2
+    set tripcoup 4 9.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_9.0_d4_0.0_ymt_259.5
+    set tripcoup 4 9.0    # c3
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_12.0_d4_0.0_ymt_86.5
+    set tripcoup 4 12.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_12.0_d4_0.0_ymt_103.8
+    set tripcoup 4 12.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_12.0_d4_0.0_ymt_121.1
+    set tripcoup 4 12.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_12.0_d4_0.0_ymt_138.4
+    set tripcoup 4 12.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_12.0_d4_0.0_ymt_155.7
+    set tripcoup 4 12.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_12.0_d4_0.0_ymt_173.0
+    set tripcoup 4 12.0    # c3
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_12.0_d4_0.0_ymt_190.3
+    set tripcoup 4 12.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_12.0_d4_0.0_ymt_207.6
+    set tripcoup 4 12.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_12.0_d4_0.0_ymt_224.9
+    set tripcoup 4 12.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_12.0_d4_0.0_ymt_242.2
+    set tripcoup 4 12.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_12.0_d4_0.0_ymt_259.5
+    set tripcoup 4 12.0    # c3
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_15.0_d4_0.0_ymt_86.5
+    set tripcoup 4 15.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_15.0_d4_0.0_ymt_103.8
+    set tripcoup 4 15.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_15.0_d4_0.0_ymt_121.1
+    set tripcoup 4 15.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_15.0_d4_0.0_ymt_138.4
+    set tripcoup 4 15.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_15.0_d4_0.0_ymt_155.7
+    set tripcoup 4 15.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_15.0_d4_0.0_ymt_173.0
+    set tripcoup 4 15.0    # c3
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_15.0_d4_0.0_ymt_190.3
+    set tripcoup 4 15.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_15.0_d4_0.0_ymt_207.6
+    set tripcoup 4 15.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_15.0_d4_0.0_ymt_224.9
+    set tripcoup 4 15.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_15.0_d4_0.0_ymt_242.2
+    set tripcoup 4 15.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_15.0_d4_0.0_ymt_259.5
+    set tripcoup 4 15.0    # c3
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_18.0_d4_0.0_ymt_86.5
+    set tripcoup 4 18.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_18.0_d4_0.0_ymt_103.8
+    set tripcoup 4 18.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_18.0_d4_0.0_ymt_121.1
+    set tripcoup 4 18.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_18.0_d4_0.0_ymt_138.4
+    set tripcoup 4 18.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_18.0_d4_0.0_ymt_155.7
+    set tripcoup 4 18.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_18.0_d4_0.0_ymt_173.0
+    set tripcoup 4 18.0    # c3
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_18.0_d4_0.0_ymt_190.3
+    set tripcoup 4 18.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_18.0_d4_0.0_ymt_207.6
+    set tripcoup 4 18.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_18.0_d4_0.0_ymt_224.9
+    set tripcoup 4 18.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_18.0_d4_0.0_ymt_242.2
+    set tripcoup 4 18.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_18.0_d4_0.0_ymt_259.5
+    set tripcoup 4 18.0    # c3
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_21.0_d4_0.0_ymt_86.5
+    set tripcoup 4 21.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_21.0_d4_0.0_ymt_103.8
+    set tripcoup 4 21.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_21.0_d4_0.0_ymt_121.1
+    set tripcoup 4 21.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_21.0_d4_0.0_ymt_138.4
+    set tripcoup 4 21.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_21.0_d4_0.0_ymt_155.7
+    set tripcoup 4 21.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_21.0_d4_0.0_ymt_173.0
+    set tripcoup 4 21.0    # c3
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_21.0_d4_0.0_ymt_190.3
+    set tripcoup 4 21.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_21.0_d4_0.0_ymt_207.6
+    set tripcoup 4 21.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_21.0_d4_0.0_ymt_224.9
+    set tripcoup 4 21.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_21.0_d4_0.0_ymt_242.2
+    set tripcoup 4 21.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_21.0_d4_0.0_ymt_259.5
+    set tripcoup 4 21.0    # c3
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_24.0_d4_0.0_ymt_86.5
+    set tripcoup 4 24.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_24.0_d4_0.0_ymt_103.8
+    set tripcoup 4 24.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_24.0_d4_0.0_ymt_121.1
+    set tripcoup 4 24.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_24.0_d4_0.0_ymt_138.4
+    set tripcoup 4 24.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_24.0_d4_0.0_ymt_155.7
+    set tripcoup 4 24.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_24.0_d4_0.0_ymt_173.0
+    set tripcoup 4 24.0    # c3
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_24.0_d4_0.0_ymt_190.3
+    set tripcoup 4 24.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_24.0_d4_0.0_ymt_207.6
+    set tripcoup 4 24.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_24.0_d4_0.0_ymt_224.9
+    set tripcoup 4 24.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_24.0_d4_0.0_ymt_242.2
+    set tripcoup 4 24.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_24.0_d4_0.0_ymt_259.5
+    set tripcoup 4 24.0    # c3
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_27.0_d4_0.0_ymt_86.5
+    set tripcoup 4 27.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_27.0_d4_0.0_ymt_103.8
+    set tripcoup 4 27.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_27.0_d4_0.0_ymt_121.1
+    set tripcoup 4 27.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_27.0_d4_0.0_ymt_138.4
+    set tripcoup 4 27.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_27.0_d4_0.0_ymt_155.7
+    set tripcoup 4 27.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_27.0_d4_0.0_ymt_173.0
+    set tripcoup 4 27.0    # c3
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_27.0_d4_0.0_ymt_190.3
+    set tripcoup 4 27.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_27.0_d4_0.0_ymt_207.6
+    set tripcoup 4 27.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_27.0_d4_0.0_ymt_224.9
+    set tripcoup 4 27.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_27.0_d4_0.0_ymt_242.2
+    set tripcoup 4 27.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_27.0_d4_0.0_ymt_259.5
+    set tripcoup 4 27.0    # c3
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_30.0_d4_0.0_ymt_86.5
+    set tripcoup 4 30.0    # c3
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_30.0_d4_0.0_ymt_103.8
+    set tripcoup 4 30.0    # c3
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_30.0_d4_0.0_ymt_121.1
+    set tripcoup 4 30.0    # c3
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_30.0_d4_0.0_ymt_138.4
+    set tripcoup 4 30.0    # c3
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_30.0_d4_0.0_ymt_155.7
+    set tripcoup 4 30.0    # c3
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_30.0_d4_0.0_ymt_173.0
+    set tripcoup 4 30.0    # c3
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_30.0_d4_0.0_ymt_190.3
+    set tripcoup 4 30.0    # c3
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_30.0_d4_0.0_ymt_207.6
+    set tripcoup 4 30.0    # c3
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_30.0_d4_0.0_ymt_224.9
+    set tripcoup 4 30.0    # c3
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_30.0_d4_0.0_ymt_242.2
+    set tripcoup 4 30.0    # c3
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_30.0_d4_0.0_ymt_259.5
+    set tripcoup 4 30.0    # c3
+    set yukawa 6 259.5     # ymt
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3ktreweight/run_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3ktreweight/run_card.dat
new file mode 100644
index 00000000000..869f39f5de7
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/c3ktreweight/run_card.dat
@@ -0,0 +1,267 @@
+#*********************************************************************
+#                       MadGraph5_aMC@NLO                            *
+#                                                                    *
+#                     run_card.dat MadEvent                          *
+#                                                                    *
+#  This file is used to set the parameters of the run.               *
+#                                                                    *
+#  Some notation/conventions:                                        *
+#                                                                    *
+#   Lines starting with a '# ' are info or comments                  *
+#                                                                    *
+#   mind the format:   value    = variable     ! comment             *
+#                                                                    *
+#   To display more options, you can type the command:               *
+#      update to_full                                                *
+#*********************************************************************
+#                                                                    
+#*********************************************************************
+# Tag name for the run (one word)                                    *
+#*********************************************************************
+  tag_1	= run_tag ! name of the run 
+#*********************************************************************
+# Number of events and rnd seed                                      *
+# Warning: Do not generate more than 1M events in a single run       *
+#*********************************************************************
+  100000	= nevents ! Number of unweighted events requested 
+  0	= iseed ! rnd seed (0=assigned automatically=default))
+#*********************************************************************
+# Collider type and energy                                           *
+# lpp: 0=No PDF, 1=proton, -1=antiproton, 2=photon from proton,      *
+#                3=photon from electron, 4=photon from muon          *
+#*********************************************************************
+  1	= lpp1 ! beam 1 type 
+  1	= lpp2 ! beam 2 type
+  6800.0	= ebeam1 ! beam 1 total energy in GeV
+  6800.0	= ebeam2 ! beam 2 total energy in GeV
+
+#*********************************************************************
+# Beam polarization from -100 (left-handed) to 100 (right-handed)    *
+#*********************************************************************
+     0.0     = polbeam1 ! beam polarization for beam 1
+     0.0     = polbeam2 ! beam polarization for beam 2
+
+
+#*********************************************************************
+# PDF CHOICE: this automatically fixes also alpha_s and its evol.    *
+#*********************************************************************
+  lhapdf	= pdlabel ! PDF set                                     
+  325500	= lhaid ! if pdlabel=lhapdf, this is the lhapdf number
+# To see heavy ion options: type "update ion_pdf"
+#*********************************************************************
+# Renormalization and factorization scales                           *
+#*********************************************************************
+  False	= fixed_ren_scale ! if .true. use fixed ren scale
+  False	= fixed_fac_scale ! if .true. use fixed fac scale
+  91.188	= scale ! fixed ren scale
+  91.188	= dsqrt_q2fact1 ! fixed fact scale for pdf1
+  91.188	= dsqrt_q2fact2 ! fixed fact scale for pdf2
+  -1	= dynamical_scale_choice ! Choose one of the preselected dynamical choices
+  1.0	= scalefact ! scale factor for event-by-event scales
+#*********************************************************************
+# Type and output format
+#*********************************************************************
+  True	= gridpack !True = setting up the grid pack
+  -1.0	= time_of_flight ! threshold (in mm) below which the invariant livetime is not written (-1 means not written)
+  sum	= event_norm ! average/sum. Normalization of the weight in the LHEF
+
+#*********************************************************************
+# Matching parameter (MLM only)
+#*********************************************************************
+ 0 = ickkw            ! 0 no matching, 1 MLM
+ 1.0 = alpsfact         ! scale factor for QCD emission vx
+ False = chcluster        ! cluster only according to channel diag
+ 4 = asrwgtflavor     ! highest quark flavor for a_s reweight
+ True  = auto_ptj_mjj  ! Automatic setting of ptj and mjj if xqcut >0
+                                   ! (turn off for VBF and single top processes)
+ 0.0   = xqcut   ! minimum kt jet measure between partons
+
+
+#*********************************************************************
+#
+#*********************************************************************
+# Phase-Space Optimization strategy (basic options)
+#*********************************************************************
+  0	= nhel ! using helicities importance sampling or not.
+                             ! 0: sum over helicity, 1: importance sampling
+  2	= sde_strategy ! default integration strategy (hep-ph/2021.00773)
+                             ! 1 is old strategy (using amp square)
+			     ! 2 is new strategy (using only the denominator)
+# To see advanced option for Phase-Space optimization: type "update psoptim"			     
+#*********************************************************************
+# Generation bias, check the wiki page below for more information:   *
+#  'cp3.irmp.ucl.ac.be/projects/madgraph/wiki/LOEventGenerationBias' *
+#*********************************************************************
+  None	= bias_module ! Bias type of bias, [None, ptj_bias, -custom_folder-]
+  {}	= bias_parameters ! Specifies the parameters of the module.
+#
+#*******************************                                                 
+# Parton level cuts definition *
+#*******************************                                     
+#                                                                    
+#
+#*********************************************************************
+# BW cutoff (M+/-bwcutoff*Gamma) ! Define on/off-shell for "$" and decay  
+#*********************************************************************
+  15.0	= bwcutoff ! (M+/-bwcutoff*Gamma)
+#*********************************************************************
+# Standard Cuts                                                      *
+#*********************************************************************
+# Minimum and maximum pt's (for max, -1 means no cut)                *
+#*********************************************************************
+  {}	= pt_min_pdg ! pt cut for other particles (use pdg code). Applied on particle and anti-particle
+  {}	= pt_max_pdg ! pt cut for other particles (syntax e.g. {6: 100, 25: 50}) 
+
+#*********************************************************************
+# Minimum and maximum E's (in the center of mass frame)              *
+#*********************************************************************
+  0.0  = ej     ! minimum E for the jets
+  0.0  = eb     ! minimum E for the b
+  0.0  = ea     ! minimum E for the photons
+  0.0  = el     ! minimum E for the charged leptons
+  -1.0   = ejmax ! maximum E for the jets
+ -1.0   = ebmax ! maximum E for the b
+ -1.0   = eamax ! maximum E for the photons
+ -1.0   = elmax ! maximum E for the charged leptons
+ {} = e_min_pdg ! E cut for other particles (use pdg code). Applied on particle and anti-particle
+ {} = e_max_pdg ! E cut for other particles (syntax e.g. {6: 100, 25: 50})
+
+#*********************************************************************
+# Maximum and minimum absolute rapidity (for max, -1 means no cut)   *
+#*********************************************************************
+  {}	= eta_min_pdg ! rap cut for other particles (use pdg code). Applied on particle and anti-particle
+  {}	= eta_max_pdg ! rap cut for other particles (syntax e.g. {6: 2.5, 23: 5})
+#*********************************************************************
+# Minimum and maximum DeltaR distance                                *
+#*********************************************************************
+#*********************************************************************
+# Minimum and maximum invariant mass for pairs                       *
+#*********************************************************************
+  {}	= mxx_min_pdg ! min invariant mass of a pair of particles X/X~ (e.g. {6:250})
+  {'default': False}	= mxx_only_part_antipart ! if True the invariant mass is applied only 
+                       ! to pairs of particle/antiparticle and not to pairs of the same pdg codes.  
+#*********************************************************************
+# Inclusive cuts                                                     *
+#*********************************************************************
+  0.0	= ptheavy ! minimum pt for at least one heavy final state
+#*********************************************************************
+# maximal pdg code for quark to be considered as a light jet         *
+# (otherwise b cuts are applied)                                     *
+#*********************************************************************
+  4	= maxjetflavor ! Maximum jet pdg code
+#*********************************************************************
+#
+#*********************************************************************
+# Store info for systematics studies                                 *
+# WARNING: Do not use for interference type of computation           *
+#*********************************************************************
+  True	= use_syst ! Enable systematics studies
+#
+  None	= systematics_program ! none, systematics [python], SysCalc [depreceted, C++]
+  ['--mur=0.5,1,2', '--muf=0.5,1,2', '--pdf=errorset']	= systematics_arguments ! see: https://cp3.irmp.ucl.ac.be/projects/madgraph/wiki/Systematics#Systematicspythonmodule
+# Syscalc is deprecated but to see the associate options type'update syscalc'
+#***********************************************************************
+# Turn on either the ktdurham or ptlund cut to activate                *
+# CKKW(L) merging with Pythia8 [arXiv:1410.3012, arXiv:1109.4829]      *
+#***********************************************************************
+ -1.0  =  ktdurham
+ 0.4   =  dparameter
+ -1.0  =  ptlund
+ 21, 1, 2, 3, 4, 5, 6  =  pdgs_for_merging_cut ! PDGs for two cuts above
+#********************************************************************* 
+#  Additional hidden parameters
+#*********************************************************************
+  1	= ktscheme # hidden_parameter
+  0.4	= draa # hidden_parameter
+  -1.0	= ptamax # hidden_parameter
+  2.5	= etal # hidden_parameter
+  0.0	= ht4min # hidden_parameter
+  0.0	= ptl4min # hidden_parameter
+  True	= isoem # hidden_parameter
+  -1.0	= mmbbmax # hidden_parameter
+  0.0	= ptj4min # hidden_parameter
+  0.4	= dral # hidden_parameter
+  -1.0	= drajmax # hidden_parameter
+  -1.0	= drabmax # hidden_parameter
+  0.0	= misset # hidden_parameter
+  0.4	= draj # hidden_parameter
+  -1.0	= ptj3max # hidden_parameter
+  -1.0	= ptl4max # hidden_parameter
+  -1.0	= drblmax # hidden_parameter
+  -1.0	= drjlmax # hidden_parameter
+  0.0	= xptb # hidden_parameter
+  -1.0	= drllmax # hidden_parameter
+  0.0	= drab # hidden_parameter
+  0.0	= ht2min # hidden_parameter
+  0.0	= ptj1min # hidden_parameter
+  0.0	= etalmin # hidden_parameter
+  0.0	= mmbb # hidden_parameter
+  -1.0	= ptj4max # hidden_parameter
+  -1.0	= ptllmax # hidden_parameter
+  1.0	= ptl # hidden_parameter
+  0.0	= ptl1min # hidden_parameter
+  2.0	= ptj # hidden_parameter
+  -1.0	= mmllmax # hidden_parameter
+  0	= cutuse # hidden_parameter
+  0.0	= xptj # hidden_parameter
+  0.0	= drbl # hidden_parameter
+  1.0	= pta # hidden_parameter
+  0.0	= ptj3min # hidden_parameter
+  10.0	= etaj # hidden_parameter
+  0.0	= ptllmin # hidden_parameter
+  -1.0	= ptl2max # hidden_parameter
+  -1.0	= etab # hidden_parameter
+  0.4	= drjl # hidden_parameter
+  -1.0	= ptbmax # hidden_parameter
+  0.0	= ptj2min # hidden_parameter
+  -1.0	= ptl3max # hidden_parameter
+  -1.0	= ptj1max # hidden_parameter
+  -1.0	= dralmax # hidden_parameter
+  -1.0	= mmaamax # hidden_parameter
+  -1.0	= ptlmax # hidden_parameter
+  -1.0	= missetmax # hidden_parameter
+  0.0	= xptl # hidden_parameter
+  -1.0	= ptl1max # hidden_parameter
+  0.4	= r0gamma # hidden_parameter
+  0.0	= drbj # hidden_parameter
+  True	= clusinfo # hidden_parameter
+  1.0	= xn # hidden_parameter
+  -1.0	= drbjmax # hidden_parameter
+  True	= pdfwgt # hidden_parameter
+  2.5	= etaa # hidden_parameter
+  -1.0	= ptjmax # hidden_parameter
+  0.4	= drll # hidden_parameter
+  -1.0	= mmnlmax # hidden_parameter
+  -1.0	= ihtmax # hidden_parameter
+  -1.0	= htjmax # hidden_parameter
+  -1.0	= ptj2max # hidden_parameter
+  0.0	= ptb # hidden_parameter
+  0.0	= ptl2min # hidden_parameter
+  0.0	= ptl3min # hidden_parameter
+  -1.0	= ht3max # hidden_parameter
+  1	= highestmult # hidden_parameter
+  -1.0	= mmjjmax # hidden_parameter
+  -1.0	= ht2max # hidden_parameter
+  3.0	= lhe_version # hidden_parameter
+  0.0	= drbb # hidden_parameter
+  0.0	= htjmin # hidden_parameter
+  -1.0	= draamax # hidden_parameter
+  0.0	= etaamin # hidden_parameter
+  0.0	= xetamin # hidden_parameter
+  0.4	= drjj # hidden_parameter
+  0.0	= deltaeta # hidden_parameter
+  -1.0	= ht4max # hidden_parameter
+  0.0	= mmjj # hidden_parameter
+  0.0	= ptgmin # hidden_parameter
+  0.0	= ihtmin # hidden_parameter
+  0.0	= etabmin # hidden_parameter
+  0.0	= mmnl # hidden_parameter
+  -1.0	= drjjmax # hidden_parameter
+  False	= cut_decays # hidden_parameter
+  0.0	= mmll # hidden_parameter
+  -1.0	= drbbmax # hidden_parameter
+  0.0	= mmaa # hidden_parameter
+  0.0	= etajmin # hidden_parameter
+  0.0	= ht3min # hidden_parameter
+  1.0	= epsgamma # hidden_parameter
+  0.0	= xpta # hidden_parameter
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/d4ktreweight/param_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/d4ktreweight/param_card.dat
new file mode 100644
index 00000000000..1811570cdde
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/d4ktreweight/param_card.dat
@@ -0,0 +1,99 @@
+######################################################################
+## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL   ####
+######################################################################
+##                                                                  ##
+##  Width set on Auto will be computed following the information    ##
+##        present in the decay.py files of the model.               ##
+##        See  arXiv:1402.1178 for more details.                    ##
+##                                                                  ##
+######################################################################
+
+###################################
+## INFORMATION FOR MASS
+###################################
+Block mass 
+    5 4.700000e+00 # MB 
+    6 1.730000e+02 # MT 
+   15 1.777000e+00 # MTA 
+   23 9.118800e+01 # MZ 
+   25 1.250000e+02 # MH 
+## Dependent parameters, given by model restrictions.
+## Those values should be edited following the 
+## analytical expression. MG5 ignores those values 
+## but they are important for interfacing the output of MG5
+## to external program such as Pythia.
+  1 0.000000e+00 # d : 0.0 
+  2 0.000000e+00 # u : 0.0 
+  3 0.000000e+00 # s : 0.0 
+  4 0.000000e+00 # c : 0.0 
+  11 0.000000e+00 # e- : 0.0 
+  12 0.000000e+00 # ve : 0.0 
+  13 0.000000e+00 # mu- : 0.0 
+  14 0.000000e+00 # vm : 0.0 
+  16 0.000000e+00 # vt : 0.0 
+  21 0.000000e+00 # g : 0.0 
+  22 0.000000e+00 # a : 0.0 
+  24 8.041900e+01 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4. - (aEW*cmath.pi*MZ__exp__2)/(Gf*sqrt__2))) 
+
+###################################
+## INFORMATION FOR QUARTCOUP
+###################################
+Block quartcoup 
+    6 0.000000e+00 # d4 
+
+###################################
+## INFORMATION FOR SMINPUTS
+###################################
+Block sminputs 
+    1 1.325070e+02 # aEWM1 
+    2 1.166390e-05 # Gf 
+    3 1.180000e-01 # aS (Note that Parameter not used if you use a PDF set) 
+
+###################################
+## INFORMATION FOR TRIPCOUP
+###################################
+Block tripcoup 
+    4 0.000000e+00 # c3 
+
+###################################
+## INFORMATION FOR YUKAWA
+###################################
+Block yukawa 
+    5 4.700000e+00 # ymb 
+    6 1.730000e+02 # ymt 
+   15 1.777000e+00 # ymtau 
+
+###################################
+## INFORMATION FOR DECAY
+###################################
+DECAY   6 1.491500e+00 # WT 
+DECAY  23 2.441404e+00 # WZ 
+DECAY  24 2.047600e+00 # WW 
+DECAY  25 6.382339e-03 # WH 
+## Dependent parameters, given by model restrictions.
+## Those values should be edited following the 
+## analytical expression. MG5 ignores those values 
+## but they are important for interfacing the output of MG5
+## to external program such as Pythia.
+DECAY  1 0.000000e+00 # d : 0.0 
+DECAY  2 0.000000e+00 # u : 0.0 
+DECAY  3 0.000000e+00 # s : 0.0 
+DECAY  4 0.000000e+00 # c : 0.0 
+DECAY  5 0.000000e+00 # b : 0.0 
+DECAY  11 0.000000e+00 # e- : 0.0 
+DECAY  12 0.000000e+00 # ve : 0.0 
+DECAY  13 0.000000e+00 # mu- : 0.0 
+DECAY  14 0.000000e+00 # vm : 0.0 
+DECAY  15 0.000000e+00 # ta- : 0.0 
+DECAY  16 0.000000e+00 # vt : 0.0 
+DECAY  21 0.000000e+00 # g : 0.0 
+DECAY  22 0.000000e+00 # a : 0.0 
+#===========================================================
+# QUANTUM NUMBERS OF NEW STATE(S) (NON SM PDG CODE)
+#===========================================================
+
+Block QNUMBERS 82  # gh 
+        1 0  # 3 times electric charge
+        2 1  # number of spin states (2S+1)
+        3 8  # colour rep (1: singlet, 3: triplet, 8: octet)
+        4 1  # Particle/Antiparticle distinction (0=own anti)
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/d4ktreweight/proc_card_mg5.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/d4ktreweight/proc_card_mg5.dat
new file mode 100644
index 00000000000..db7d2dc28a4
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/d4ktreweight/proc_card_mg5.dat
@@ -0,0 +1,42 @@
+#************************************************************
+#*                     MadGraph5_aMC@NLO                    *
+#*                                                          *
+#*                *                       *                 *
+#*                  *        * *        *                   *
+#*                    * * * * 5 * * * *                     *
+#*                  *        * *        *                   *
+#*                *                       *                 *
+#*                                                          *
+#*                                                          *
+#*         VERSION 2.9.18                2023-12-08         *
+#*                                                          *
+#*    The MadGraph5_aMC@NLO Development Team - Find us at   *
+#*    https://server06.fynu.ucl.ac.be/projects/madgraph     *
+#*                                                          *
+#************************************************************
+#*                                                          *
+#*               Command File for MadGraph5_aMC@NLO         *
+#*                                                          *
+#*     run as ./bin/mg5_aMC  filename                       *
+#*                                                          *
+#************************************************************
+set low_mem_multicore_nlo_generation False
+set gauge unitary
+set loop_color_flows False
+set max_npoint_for_channel 0
+set default_unset_couplings 99
+set max_t_for_channel 99
+set zerowidth_tchannel True
+set group_subprocesses Auto
+set ignore_six_quark_processes False
+set loop_optimized_output True
+set complex_mass_scheme False
+import model loop_sm_c3d4
+define p = g u c d s u~ c~ d~ s~
+define j = g u c d s u~ c~ d~ s~
+define l+ = e+ mu+
+define l- = e- mu-
+define vl = ve vm vt
+define vl~ = ve~ vm~ vt~
+generate p p > h h h [QCD]
+output GF_HHH_c3_0_d4_0 -nojpeg
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/d4ktreweight/reweight_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/d4ktreweight/reweight_card.dat
new file mode 100644
index 00000000000..790a9dec4ac
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/d4ktreweight/reweight_card.dat
@@ -0,0 +1,487 @@
+#*************************************************************************
+# Reweight Card for HHH 2D parameter scan
+# d4: -1000 to 1000, 11 points
+# ymt: 86.5 to 259.5 (0.5x to 1.5x SM), 11 points
+#*************************************************************************
+
+change rwgt_dir rwgt
+
+launch --rwgt_name=c3_0.0_d4_-1000.0_ymt_86.5
+    set quartcoup 6 -1000.0   # d4
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-1000.0_ymt_103.8
+    set quartcoup 6 -1000.0   # d4
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-1000.0_ymt_121.1
+    set quartcoup 6 -1000.0   # d4
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-1000.0_ymt_138.4
+    set quartcoup 6 -1000.0   # d4
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-1000.0_ymt_155.7
+    set quartcoup 6 -1000.0   # d4
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-1000.0_ymt_173.0
+    set quartcoup 6 -1000.0   # d4
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-1000.0_ymt_190.3
+    set quartcoup 6 -1000.0   # d4
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-1000.0_ymt_207.6
+    set quartcoup 6 -1000.0   # d4
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-1000.0_ymt_224.9
+    set quartcoup 6 -1000.0   # d4
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-1000.0_ymt_242.2
+    set quartcoup 6 -1000.0   # d4
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-1000.0_ymt_259.5
+    set quartcoup 6 -1000.0   # d4
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-800.0_ymt_86.5
+    set quartcoup 6 -800.0   # d4
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-800.0_ymt_103.8
+    set quartcoup 6 -800.0   # d4
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-800.0_ymt_121.1
+    set quartcoup 6 -800.0   # d4
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-800.0_ymt_138.4
+    set quartcoup 6 -800.0   # d4
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-800.0_ymt_155.7
+    set quartcoup 6 -800.0   # d4
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-800.0_ymt_173.0
+    set quartcoup 6 -800.0   # d4
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-800.0_ymt_190.3
+    set quartcoup 6 -800.0   # d4
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-800.0_ymt_207.6
+    set quartcoup 6 -800.0   # d4
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-800.0_ymt_224.9
+    set quartcoup 6 -800.0   # d4
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-800.0_ymt_242.2
+    set quartcoup 6 -800.0   # d4
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-800.0_ymt_259.5
+    set quartcoup 6 -800.0   # d4
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-600.0_ymt_86.5
+    set quartcoup 6 -600.0   # d4
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-600.0_ymt_103.8
+    set quartcoup 6 -600.0   # d4
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-600.0_ymt_121.1
+    set quartcoup 6 -600.0   # d4
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-600.0_ymt_138.4
+    set quartcoup 6 -600.0   # d4
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-600.0_ymt_155.7
+    set quartcoup 6 -600.0   # d4
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-600.0_ymt_173.0
+    set quartcoup 6 -600.0   # d4
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-600.0_ymt_190.3
+    set quartcoup 6 -600.0   # d4
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-600.0_ymt_207.6
+    set quartcoup 6 -600.0   # d4
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-600.0_ymt_224.9
+    set quartcoup 6 -600.0   # d4
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-600.0_ymt_242.2
+    set quartcoup 6 -600.0   # d4
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-600.0_ymt_259.5
+    set quartcoup 6 -600.0   # d4
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-400.0_ymt_86.5
+    set quartcoup 6 -400.0   # d4
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-400.0_ymt_103.8
+    set quartcoup 6 -400.0   # d4
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-400.0_ymt_121.1
+    set quartcoup 6 -400.0   # d4
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-400.0_ymt_138.4
+    set quartcoup 6 -400.0   # d4
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-400.0_ymt_155.7
+    set quartcoup 6 -400.0   # d4
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-400.0_ymt_173.0
+    set quartcoup 6 -400.0   # d4
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-400.0_ymt_190.3
+    set quartcoup 6 -400.0   # d4
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-400.0_ymt_207.6
+    set quartcoup 6 -400.0   # d4
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-400.0_ymt_224.9
+    set quartcoup 6 -400.0   # d4
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-400.0_ymt_242.2
+    set quartcoup 6 -400.0   # d4
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-400.0_ymt_259.5
+    set quartcoup 6 -400.0   # d4
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-200.0_ymt_86.5
+    set quartcoup 6 -200.0   # d4
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-200.0_ymt_103.8
+    set quartcoup 6 -200.0   # d4
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-200.0_ymt_121.1
+    set quartcoup 6 -200.0   # d4
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-200.0_ymt_138.4
+    set quartcoup 6 -200.0   # d4
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-200.0_ymt_155.7
+    set quartcoup 6 -200.0   # d4
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-200.0_ymt_173.0
+    set quartcoup 6 -200.0   # d4
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-200.0_ymt_190.3
+    set quartcoup 6 -200.0   # d4
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-200.0_ymt_207.6
+    set quartcoup 6 -200.0   # d4
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-200.0_ymt_224.9
+    set quartcoup 6 -200.0   # d4
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-200.0_ymt_242.2
+    set quartcoup 6 -200.0   # d4
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_0.0_d4_-200.0_ymt_259.5
+    set quartcoup 6 -200.0   # d4
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_0.0_ymt_86.5
+    set quartcoup 6 0.0   # d4
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_0.0_ymt_103.8
+    set quartcoup 6 0.0   # d4
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_0.0_d4_0.0_ymt_121.1
+    set quartcoup 6 0.0   # d4
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_0.0_d4_0.0_ymt_138.4
+    set quartcoup 6 0.0   # d4
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_0.0_d4_0.0_ymt_155.7
+    set quartcoup 6 0.0   # d4
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_0.0_d4_0.0_ymt_190.3
+    set quartcoup 6 0.0   # d4
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_0.0_d4_0.0_ymt_207.6
+    set quartcoup 6 0.0   # d4
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_0.0_d4_0.0_ymt_224.9
+    set quartcoup 6 0.0   # d4
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_0.0_d4_0.0_ymt_242.2
+    set quartcoup 6 0.0   # d4
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_0.0_d4_0.0_ymt_259.5
+    set quartcoup 6 0.0   # d4
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_200.0_ymt_86.5
+    set quartcoup 6 200.0   # d4
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_200.0_ymt_103.8
+    set quartcoup 6 200.0   # d4
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_0.0_d4_200.0_ymt_121.1
+    set quartcoup 6 200.0   # d4
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_0.0_d4_200.0_ymt_138.4
+    set quartcoup 6 200.0   # d4
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_0.0_d4_200.0_ymt_155.7
+    set quartcoup 6 200.0   # d4
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_0.0_d4_200.0_ymt_173.0
+    set quartcoup 6 200.0   # d4
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_0.0_d4_200.0_ymt_190.3
+    set quartcoup 6 200.0   # d4
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_0.0_d4_200.0_ymt_207.6
+    set quartcoup 6 200.0   # d4
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_0.0_d4_200.0_ymt_224.9
+    set quartcoup 6 200.0   # d4
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_0.0_d4_200.0_ymt_242.2
+    set quartcoup 6 200.0   # d4
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_0.0_d4_200.0_ymt_259.5
+    set quartcoup 6 200.0   # d4
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_400.0_ymt_86.5
+    set quartcoup 6 400.0   # d4
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_400.0_ymt_103.8
+    set quartcoup 6 400.0   # d4
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_0.0_d4_400.0_ymt_121.1
+    set quartcoup 6 400.0   # d4
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_0.0_d4_400.0_ymt_138.4
+    set quartcoup 6 400.0   # d4
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_0.0_d4_400.0_ymt_155.7
+    set quartcoup 6 400.0   # d4
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_0.0_d4_400.0_ymt_173.0
+    set quartcoup 6 400.0   # d4
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_0.0_d4_400.0_ymt_190.3
+    set quartcoup 6 400.0   # d4
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_0.0_d4_400.0_ymt_207.6
+    set quartcoup 6 400.0   # d4
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_0.0_d4_400.0_ymt_224.9
+    set quartcoup 6 400.0   # d4
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_0.0_d4_400.0_ymt_242.2
+    set quartcoup 6 400.0   # d4
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_0.0_d4_400.0_ymt_259.5
+    set quartcoup 6 400.0   # d4
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_600.0_ymt_86.5
+    set quartcoup 6 600.0   # d4
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_600.0_ymt_103.8
+    set quartcoup 6 600.0   # d4
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_0.0_d4_600.0_ymt_121.1
+    set quartcoup 6 600.0   # d4
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_0.0_d4_600.0_ymt_138.4
+    set quartcoup 6 600.0   # d4
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_0.0_d4_600.0_ymt_155.7
+    set quartcoup 6 600.0   # d4
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_0.0_d4_600.0_ymt_173.0
+    set quartcoup 6 600.0   # d4
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_0.0_d4_600.0_ymt_190.3
+    set quartcoup 6 600.0   # d4
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_0.0_d4_600.0_ymt_207.6
+    set quartcoup 6 600.0   # d4
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_0.0_d4_600.0_ymt_224.9
+    set quartcoup 6 600.0   # d4
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_0.0_d4_600.0_ymt_242.2
+    set quartcoup 6 600.0   # d4
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_0.0_d4_600.0_ymt_259.5
+    set quartcoup 6 600.0   # d4
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_800.0_ymt_86.5
+    set quartcoup 6 800.0   # d4
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_800.0_ymt_103.8
+    set quartcoup 6 800.0   # d4
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_0.0_d4_800.0_ymt_121.1
+    set quartcoup 6 800.0   # d4
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_0.0_d4_800.0_ymt_138.4
+    set quartcoup 6 800.0   # d4
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_0.0_d4_800.0_ymt_155.7
+    set quartcoup 6 800.0   # d4
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_0.0_d4_800.0_ymt_173.0
+    set quartcoup 6 800.0   # d4
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_0.0_d4_800.0_ymt_190.3
+    set quartcoup 6 800.0   # d4
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_0.0_d4_800.0_ymt_207.6
+    set quartcoup 6 800.0   # d4
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_0.0_d4_800.0_ymt_224.9
+    set quartcoup 6 800.0   # d4
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_0.0_d4_800.0_ymt_242.2
+    set quartcoup 6 800.0   # d4
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_0.0_d4_800.0_ymt_259.5
+    set quartcoup 6 800.0   # d4
+    set yukawa 6 259.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_1000.0_ymt_86.5
+    set quartcoup 6 1000.0   # d4
+    set yukawa 6 86.5     # ymt
+
+launch --rwgt_name=c3_0.0_d4_1000.0_ymt_103.8
+    set quartcoup 6 1000.0   # d4
+    set yukawa 6 103.8     # ymt
+
+launch --rwgt_name=c3_0.0_d4_1000.0_ymt_121.1
+    set quartcoup 6 1000.0   # d4
+    set yukawa 6 121.1     # ymt
+
+launch --rwgt_name=c3_0.0_d4_1000.0_ymt_138.4
+    set quartcoup 6 1000.0   # d4
+    set yukawa 6 138.4     # ymt
+
+launch --rwgt_name=c3_0.0_d4_1000.0_ymt_155.7
+    set quartcoup 6 1000.0   # d4
+    set yukawa 6 155.7     # ymt
+
+launch --rwgt_name=c3_0.0_d4_1000.0_ymt_173.0
+    set quartcoup 6 1000.0   # d4
+    set yukawa 6 173.0     # ymt
+
+launch --rwgt_name=c3_0.0_d4_1000.0_ymt_190.3
+    set quartcoup 6 1000.0   # d4
+    set yukawa 6 190.3     # ymt
+
+launch --rwgt_name=c3_0.0_d4_1000.0_ymt_207.6
+    set quartcoup 6 1000.0   # d4
+    set yukawa 6 207.6     # ymt
+
+launch --rwgt_name=c3_0.0_d4_1000.0_ymt_224.9
+    set quartcoup 6 1000.0   # d4
+    set yukawa 6 224.9     # ymt
+
+launch --rwgt_name=c3_0.0_d4_1000.0_ymt_242.2
+    set quartcoup 6 1000.0   # d4
+    set yukawa 6 242.2     # ymt
+
+launch --rwgt_name=c3_0.0_d4_1000.0_ymt_259.5
+    set quartcoup 6 1000.0   # d4
+    set yukawa 6 259.5     # ymt
diff --git a/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/d4ktreweight/run_card.dat b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/d4ktreweight/run_card.dat
new file mode 100644
index 00000000000..869f39f5de7
--- /dev/null
+++ b/bin/MadGraph5_aMCatNLO/cards/production/13p6TeV/HHH_heft/d4ktreweight/run_card.dat
@@ -0,0 +1,267 @@
+#*********************************************************************
+#                       MadGraph5_aMC@NLO                            *
+#                                                                    *
+#                     run_card.dat MadEvent                          *
+#                                                                    *
+#  This file is used to set the parameters of the run.               *
+#                                                                    *
+#  Some notation/conventions:                                        *
+#                                                                    *
+#   Lines starting with a '# ' are info or comments                  *
+#                                                                    *
+#   mind the format:   value    = variable     ! comment             *
+#                                                                    *
+#   To display more options, you can type the command:               *
+#      update to_full                                                *
+#*********************************************************************
+#                                                                    
+#*********************************************************************
+# Tag name for the run (one word)                                    *
+#*********************************************************************
+  tag_1	= run_tag ! name of the run 
+#*********************************************************************
+# Number of events and rnd seed                                      *
+# Warning: Do not generate more than 1M events in a single run       *
+#*********************************************************************
+  100000	= nevents ! Number of unweighted events requested 
+  0	= iseed ! rnd seed (0=assigned automatically=default))
+#*********************************************************************
+# Collider type and energy                                           *
+# lpp: 0=No PDF, 1=proton, -1=antiproton, 2=photon from proton,      *
+#                3=photon from electron, 4=photon from muon          *
+#*********************************************************************
+  1	= lpp1 ! beam 1 type 
+  1	= lpp2 ! beam 2 type
+  6800.0	= ebeam1 ! beam 1 total energy in GeV
+  6800.0	= ebeam2 ! beam 2 total energy in GeV
+
+#*********************************************************************
+# Beam polarization from -100 (left-handed) to 100 (right-handed)    *
+#*********************************************************************
+     0.0     = polbeam1 ! beam polarization for beam 1
+     0.0     = polbeam2 ! beam polarization for beam 2
+
+
+#*********************************************************************
+# PDF CHOICE: this automatically fixes also alpha_s and its evol.    *
+#*********************************************************************
+  lhapdf	= pdlabel ! PDF set                                     
+  325500	= lhaid ! if pdlabel=lhapdf, this is the lhapdf number
+# To see heavy ion options: type "update ion_pdf"
+#*********************************************************************
+# Renormalization and factorization scales                           *
+#*********************************************************************
+  False	= fixed_ren_scale ! if .true. use fixed ren scale
+  False	= fixed_fac_scale ! if .true. use fixed fac scale
+  91.188	= scale ! fixed ren scale
+  91.188	= dsqrt_q2fact1 ! fixed fact scale for pdf1
+  91.188	= dsqrt_q2fact2 ! fixed fact scale for pdf2
+  -1	= dynamical_scale_choice ! Choose one of the preselected dynamical choices
+  1.0	= scalefact ! scale factor for event-by-event scales
+#*********************************************************************
+# Type and output format
+#*********************************************************************
+  True	= gridpack !True = setting up the grid pack
+  -1.0	= time_of_flight ! threshold (in mm) below which the invariant livetime is not written (-1 means not written)
+  sum	= event_norm ! average/sum. Normalization of the weight in the LHEF
+
+#*********************************************************************
+# Matching parameter (MLM only)
+#*********************************************************************
+ 0 = ickkw            ! 0 no matching, 1 MLM
+ 1.0 = alpsfact         ! scale factor for QCD emission vx
+ False = chcluster        ! cluster only according to channel diag
+ 4 = asrwgtflavor     ! highest quark flavor for a_s reweight
+ True  = auto_ptj_mjj  ! Automatic setting of ptj and mjj if xqcut >0
+                                   ! (turn off for VBF and single top processes)
+ 0.0   = xqcut   ! minimum kt jet measure between partons
+
+
+#*********************************************************************
+#
+#*********************************************************************
+# Phase-Space Optimization strategy (basic options)
+#*********************************************************************
+  0	= nhel ! using helicities importance sampling or not.
+                             ! 0: sum over helicity, 1: importance sampling
+  2	= sde_strategy ! default integration strategy (hep-ph/2021.00773)
+                             ! 1 is old strategy (using amp square)
+			     ! 2 is new strategy (using only the denominator)
+# To see advanced option for Phase-Space optimization: type "update psoptim"			     
+#*********************************************************************
+# Generation bias, check the wiki page below for more information:   *
+#  'cp3.irmp.ucl.ac.be/projects/madgraph/wiki/LOEventGenerationBias' *
+#*********************************************************************
+  None	= bias_module ! Bias type of bias, [None, ptj_bias, -custom_folder-]
+  {}	= bias_parameters ! Specifies the parameters of the module.
+#
+#*******************************                                                 
+# Parton level cuts definition *
+#*******************************                                     
+#                                                                    
+#
+#*********************************************************************
+# BW cutoff (M+/-bwcutoff*Gamma) ! Define on/off-shell for "$" and decay  
+#*********************************************************************
+  15.0	= bwcutoff ! (M+/-bwcutoff*Gamma)
+#*********************************************************************
+# Standard Cuts                                                      *
+#*********************************************************************
+# Minimum and maximum pt's (for max, -1 means no cut)                *
+#*********************************************************************
+  {}	= pt_min_pdg ! pt cut for other particles (use pdg code). Applied on particle and anti-particle
+  {}	= pt_max_pdg ! pt cut for other particles (syntax e.g. {6: 100, 25: 50}) 
+
+#*********************************************************************
+# Minimum and maximum E's (in the center of mass frame)              *
+#*********************************************************************
+  0.0  = ej     ! minimum E for the jets
+  0.0  = eb     ! minimum E for the b
+  0.0  = ea     ! minimum E for the photons
+  0.0  = el     ! minimum E for the charged leptons
+  -1.0   = ejmax ! maximum E for the jets
+ -1.0   = ebmax ! maximum E for the b
+ -1.0   = eamax ! maximum E for the photons
+ -1.0   = elmax ! maximum E for the charged leptons
+ {} = e_min_pdg ! E cut for other particles (use pdg code). Applied on particle and anti-particle
+ {} = e_max_pdg ! E cut for other particles (syntax e.g. {6: 100, 25: 50})
+
+#*********************************************************************
+# Maximum and minimum absolute rapidity (for max, -1 means no cut)   *
+#*********************************************************************
+  {}	= eta_min_pdg ! rap cut for other particles (use pdg code). Applied on particle and anti-particle
+  {}	= eta_max_pdg ! rap cut for other particles (syntax e.g. {6: 2.5, 23: 5})
+#*********************************************************************
+# Minimum and maximum DeltaR distance                                *
+#*********************************************************************
+#*********************************************************************
+# Minimum and maximum invariant mass for pairs                       *
+#*********************************************************************
+  {}	= mxx_min_pdg ! min invariant mass of a pair of particles X/X~ (e.g. {6:250})
+  {'default': False}	= mxx_only_part_antipart ! if True the invariant mass is applied only 
+                       ! to pairs of particle/antiparticle and not to pairs of the same pdg codes.  
+#*********************************************************************
+# Inclusive cuts                                                     *
+#*********************************************************************
+  0.0	= ptheavy ! minimum pt for at least one heavy final state
+#*********************************************************************
+# maximal pdg code for quark to be considered as a light jet         *
+# (otherwise b cuts are applied)                                     *
+#*********************************************************************
+  4	= maxjetflavor ! Maximum jet pdg code
+#*********************************************************************
+#
+#*********************************************************************
+# Store info for systematics studies                                 *
+# WARNING: Do not use for interference type of computation           *
+#*********************************************************************
+  True	= use_syst ! Enable systematics studies
+#
+  None	= systematics_program ! none, systematics [python], SysCalc [depreceted, C++]
+  ['--mur=0.5,1,2', '--muf=0.5,1,2', '--pdf=errorset']	= systematics_arguments ! see: https://cp3.irmp.ucl.ac.be/projects/madgraph/wiki/Systematics#Systematicspythonmodule
+# Syscalc is deprecated but to see the associate options type'update syscalc'
+#***********************************************************************
+# Turn on either the ktdurham or ptlund cut to activate                *
+# CKKW(L) merging with Pythia8 [arXiv:1410.3012, arXiv:1109.4829]      *
+#***********************************************************************
+ -1.0  =  ktdurham
+ 0.4   =  dparameter
+ -1.0  =  ptlund
+ 21, 1, 2, 3, 4, 5, 6  =  pdgs_for_merging_cut ! PDGs for two cuts above
+#********************************************************************* 
+#  Additional hidden parameters
+#*********************************************************************
+  1	= ktscheme # hidden_parameter
+  0.4	= draa # hidden_parameter
+  -1.0	= ptamax # hidden_parameter
+  2.5	= etal # hidden_parameter
+  0.0	= ht4min # hidden_parameter
+  0.0	= ptl4min # hidden_parameter
+  True	= isoem # hidden_parameter
+  -1.0	= mmbbmax # hidden_parameter
+  0.0	= ptj4min # hidden_parameter
+  0.4	= dral # hidden_parameter
+  -1.0	= drajmax # hidden_parameter
+  -1.0	= drabmax # hidden_parameter
+  0.0	= misset # hidden_parameter
+  0.4	= draj # hidden_parameter
+  -1.0	= ptj3max # hidden_parameter
+  -1.0	= ptl4max # hidden_parameter
+  -1.0	= drblmax # hidden_parameter
+  -1.0	= drjlmax # hidden_parameter
+  0.0	= xptb # hidden_parameter
+  -1.0	= drllmax # hidden_parameter
+  0.0	= drab # hidden_parameter
+  0.0	= ht2min # hidden_parameter
+  0.0	= ptj1min # hidden_parameter
+  0.0	= etalmin # hidden_parameter
+  0.0	= mmbb # hidden_parameter
+  -1.0	= ptj4max # hidden_parameter
+  -1.0	= ptllmax # hidden_parameter
+  1.0	= ptl # hidden_parameter
+  0.0	= ptl1min # hidden_parameter
+  2.0	= ptj # hidden_parameter
+  -1.0	= mmllmax # hidden_parameter
+  0	= cutuse # hidden_parameter
+  0.0	= xptj # hidden_parameter
+  0.0	= drbl # hidden_parameter
+  1.0	= pta # hidden_parameter
+  0.0	= ptj3min # hidden_parameter
+  10.0	= etaj # hidden_parameter
+  0.0	= ptllmin # hidden_parameter
+  -1.0	= ptl2max # hidden_parameter
+  -1.0	= etab # hidden_parameter
+  0.4	= drjl # hidden_parameter
+  -1.0	= ptbmax # hidden_parameter
+  0.0	= ptj2min # hidden_parameter
+  -1.0	= ptl3max # hidden_parameter
+  -1.0	= ptj1max # hidden_parameter
+  -1.0	= dralmax # hidden_parameter
+  -1.0	= mmaamax # hidden_parameter
+  -1.0	= ptlmax # hidden_parameter
+  -1.0	= missetmax # hidden_parameter
+  0.0	= xptl # hidden_parameter
+  -1.0	= ptl1max # hidden_parameter
+  0.4	= r0gamma # hidden_parameter
+  0.0	= drbj # hidden_parameter
+  True	= clusinfo # hidden_parameter
+  1.0	= xn # hidden_parameter
+  -1.0	= drbjmax # hidden_parameter
+  True	= pdfwgt # hidden_parameter
+  2.5	= etaa # hidden_parameter
+  -1.0	= ptjmax # hidden_parameter
+  0.4	= drll # hidden_parameter
+  -1.0	= mmnlmax # hidden_parameter
+  -1.0	= ihtmax # hidden_parameter
+  -1.0	= htjmax # hidden_parameter
+  -1.0	= ptj2max # hidden_parameter
+  0.0	= ptb # hidden_parameter
+  0.0	= ptl2min # hidden_parameter
+  0.0	= ptl3min # hidden_parameter
+  -1.0	= ht3max # hidden_parameter
+  1	= highestmult # hidden_parameter
+  -1.0	= mmjjmax # hidden_parameter
+  -1.0	= ht2max # hidden_parameter
+  3.0	= lhe_version # hidden_parameter
+  0.0	= drbb # hidden_parameter
+  0.0	= htjmin # hidden_parameter
+  -1.0	= draamax # hidden_parameter
+  0.0	= etaamin # hidden_parameter
+  0.0	= xetamin # hidden_parameter
+  0.4	= drjj # hidden_parameter
+  0.0	= deltaeta # hidden_parameter
+  -1.0	= ht4max # hidden_parameter
+  0.0	= mmjj # hidden_parameter
+  0.0	= ptgmin # hidden_parameter
+  0.0	= ihtmin # hidden_parameter
+  0.0	= etabmin # hidden_parameter
+  0.0	= mmnl # hidden_parameter
+  -1.0	= drjjmax # hidden_parameter
+  False	= cut_decays # hidden_parameter
+  0.0	= mmll # hidden_parameter
+  -1.0	= drbbmax # hidden_parameter
+  0.0	= mmaa # hidden_parameter
+  0.0	= etajmin # hidden_parameter
+  0.0	= ht3min # hidden_parameter
+  1.0	= epsgamma # hidden_parameter
+  0.0	= xpta # hidden_parameter