classicthesis-config.tex

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Classicthesis Typographic Thesis
% Configuration File
%
% This file has been downloaded from:
% http://www.LaTeXTemplates.com
%
% Original author:
% André Miede (http://www.miede.de) with extensive commenting changes by:
% Vel (vel@LaTeXTemplates.com)
%
% License:
% GNU General Public License (v2)
%
% Important note:
% The main lines to change in this file are in the DOCUMENT VARIABLES
% section, the rest of the file is for advanced configuration.
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%----------------------------------------------------------------------------------------
%	CHARACTER ENCODING
%----------------------------------------------------------------------------------------

\PassOptionsToPackage{utf8}{inputenc} % Set the encoding of your files. UTF-8 is the only sensible encoding nowadays. If you can't read äöüßáéçèê∂åëæƒÏ€ then change the encoding setting in your editor, not the line below. If your editor does not support utf8 use another editor!
\usepackage{inputenc}

%----------------------------------------------------------------------------------------
%	DOCUMENT VARIABLES
%	Fill in the lines below to enter your information into the thesis template
%	Each of the commands can be cited anywhere in the thesis
%----------------------------------------------------------------------------------------

% Remove drafting to get rid of the '[ Date - classicthesis version 4.0 ]' text at the bottom of every page
\PassOptionsToPackage{eulerchapternumbers,listings, pdfspacing, subfig,beramono,eulermath,parts}{classicthesis}

\newcommand{\myTitle}{Conception et développement d'un chatbot basé sur un LLM comme support de vulgarisation au système juridique Congolais \xspace}
\newcommand{\myTitleEn}{Design and development of a LLM-based chatbot as an awareness-raising tool for the Congolese legal system\xspace}
\newcommand{\mySubtitle}{TFC\xspace}
\newcommand{\myDegree}{Licencié en informatique\xspace}
\newcommand{\myName}{\textsc{TSHABU NGANDU} Bernard\xspace}
\newcommand{\myProf}{Prof. BAGULA Antoine PhD.\xspace}
\newcommand{\myOtherProf}{Ass. MBALE Landry\xspace}
\newcommand{\mySupervisor}{Ass. MBALE Landry\xspace}
\newcommand{\myFaculty}{Faculté des Sciences Informatiques\xspace}
\newcommand{\myDepartment}{{Réseaux et Infrastructures}\xspace}
\newcommand{\myUni}{{Université Nouveaux Horizons}\xspace}
\newcommand{\myLocation}{République démocratique du Congo, Haut-Katanga, Lubumbashi\xspace}
\newcommand{\myTime}{Juillet 2024\xspace}
\newcommand{\myVersion}{version 5.2\xspace}

%----------------------------------------------------------------------------------------
%	USEFUL COMMANDS
%----------------------------------------------------------------------------------------

\newcommand{\ie}{i.\,e.}
\newcommand{\Ie}{I.\,e.}
\newcommand{\eg}{e.\,g.}
\newcommand{\Eg}{E.\,g.} 
\newcommand{\cf}{\emph{cf. }} 

\newcounter{dummy} % Necessary for correct hyperlinks (to index, bib, etc.)
\providecommand{\mLyX}{L\kern-.1667em\lower.25em\hbox{Y}\kern-.125emX\@}
\newlength{\abcd} % for ab..z string length calculation

%----------------------------------------------------------------------------------------
%	PACKAGES
%----------------------------------------------------------------------------------------

\usepackage{lipsum} % Used for inserting dummy 'Lorem ipsum' text into the template
\usepackage{minted}
\usepackage{longtable}
%------------------------------------------------

%\PassOptionsToPackage{ngerman,american}{babel}  % Change this to your language(s)
% Spanish languages need extra options in order to work with this template
%\PassOptionsToPackage{spanish,es-lcroman}{babel}
\usepackage{babel}

%------------------------------------------------			

\usepackage{csquotes}
\PassOptionsToPackage{%
%backend=biber, % Instead of bibtex
backend=bibtex8,bibencoding=ascii,%
language=auto,%
style=numeric-comp,%
%style=authoryear-comp, % Author 1999, 2010
%bibstyle=authoryear,dashed=false, % dashed: substitute rep. author with ---
sorting=nyt, % name, year, title
maxbibnames=10, % default: 3, et al.
%backref=true,%
natbib=true % natbib compatibility mode (\citep and \citet still work)
}{biblatex}
\usepackage{biblatex}
 
 %------------------------------------------------

\PassOptionsToPackage{fleqn}{amsmath} % Math environments and more by the AMS 
 \usepackage{amsmath}
 
 %------------------------------------------------

\PassOptionsToPackage{T1}{fontenc} % T2A for cyrillics
\usepackage{fontenc}

%------------------------------------------------

\usepackage{textcomp} % Fix warning with missing font shapes

%------------------------------------------------

\usepackage{scrhack} % Fix warnings when using KOMA with listings package  

%------------------------------------------------

\usepackage{xspace} % To get the spacing after macros right

%------------------------------------------------

\usepackage{mparhack} % To get marginpar right

%------------------------------------------------

\usepackage{fixltx2e} % Fixes some LaTeX stuff 

%------------------------------------------------

\PassOptionsToPackage{smaller}{acronym} % Include printonlyused in the first bracket to only show acronyms used in the text
\usepackage{acronym} % Nice macros for handling all acronyms in the thesis

%\renewcommand*{\acsfont}[1]{\textssc{#1}} % For MinionPro
\renewcommand*{\aclabelfont}[1]{\acsfont{#1}}

%------------------------------------------------

\PassOptionsToPackage{pdftex}{graphicx}
\usepackage{graphicx} 

%----------------------------------------------------------------------------------------
%	FLOATS: TABLES, FIGURES AND CAPTIONS SETUP
%----------------------------------------------------------------------------------------

\usepackage{float}
\usepackage{tabularx} % Better tables
\setlength{\extrarowheight}{3pt} % Increase table row height
\newcommand{\tableheadline}[1]{\multicolumn{1}{c}{\spacedlowsmallcaps{#1}}}
\newcommand{\myfloatalign}{\centering} % To be used with each float for alignment
\usepackage{caption}
\captionsetup{font=small}
\usepackage{subfig}  

%----------------------------------------------------------------------------------------
%	CODE LISTINGS SETUP
%----------------------------------------------------------------------------------------

\usepackage{listings} 
%\lstset{emph={trueIndex,root},emphstyle=\color{BlueViolet}}%\underbar} % For special keywords
% \lstset{language=[LaTeX]Tex,%C++ % Specify the language(s) for listings here
% 	morekeywords={PassOptionsToPackage,selectlanguage},
% 	keywordstyle=\color{RoyalBlue}, % Add \bfseries for bold
% 	basicstyle=\small\ttfamily, % Makes listings a smaller font size and a different font
% 	%identifierstyle=\color{NavyBlue}, % Color of text inside brackets
% 	commentstyle=\color{Green}\ttfamily, % Color of comments
% 	stringstyle=\rmfamily, % Font type to use for strings
% 	numbers=left, % Change left to none to remove line numbers
% 	numberstyle=\scriptsize, % Font size of the line numbers
% 	stepnumber=5, % Increment of line numbers
% 	numbersep=8pt, % Distance of line numbers from code listing
% 	showstringspaces=false, % Sets whether spaces in strings should appear underlined
% 	breaklines=true, % Force the code to stay in the confines of the listing box
% 	%frameround=ftff, % Uncomment for rounded frame
% 	%frame=single, % Frame border - none/leftline/topline/bottomline/lines/single/shadowbox/L
% 	belowcaptionskip=.75\baselineskip % Space after the "Listing #: Desciption" text and the listing box
% }

%----------------------------------------------------------------------------------------
%	HYPERREFERENCES
%----------------------------------------------------------------------------------------

\PassOptionsToPackage{pdftex,hyperfootnotes=false,pdfpagelabels}{hyperref}
\usepackage{hyperref}  % backref linktocpage pagebackref
\pdfcompresslevel=9
\pdfadjustspacing=1

\hypersetup{
	% Uncomment the line below to remove all links (to references, figures, tables, etc), useful for b/w printouts
	%draft, 
	colorlinks=true, linktocpage=true, pdfstartpage=3, pdfstartview=FitV,
	% Uncomment the line below if you want to have black links (e.g. for printing black and white)
	%colorlinks=false, linktocpage=false, pdfborder={0 0 0}, pdfstartpage=3, pdfstartview=FitV, 
	breaklinks=true, pdfpagemode=UseNone, pageanchor=true, pdfpagemode=UseOutlines,%
	plainpages=false, bookmarksnumbered, bookmarksopen=true, bookmarksopenlevel=1,%
	hypertexnames=true, pdfhighlight=/O,%nesting=true,%frenchlinks,%
	urlcolor=webbrown, linkcolor=RoyalBlue, citecolor=webgreen, %pagecolor=RoyalBlue,%
	    %urlcolor=Black, linkcolor=Black, citecolor=Black, %pagecolor=Black,%
	%------------------------------------------------
	% PDF file meta-information
	pdftitle={\myTitle},
	pdfauthor={\textcopyright\ \myName, \myUni, \myFaculty},
	pdfsubject={thesis},
	pdfkeywords={ECW},
	pdfcreator={},
	pdfproducer={LaTeX}
	%------------------------------------------------
}

%----------------------------------------------------------------------------------------
%	AUTOREFERENCES SETUP
%	Redefines how references in text are prefaced for different 
%	languages (e.g. "Section 1.2" or "section 1.2")
%----------------------------------------------------------------------------------------

\makeatletter
\@ifpackageloaded{babel}
{
\addto\extrasamerican{
\renewcommand*{\figureautorefname}{Figure}
\renewcommand*{\tableautorefname}{Table}
\renewcommand*{\partautorefname}{Part}
\renewcommand*{\chapterautorefname}{Chapter}
\renewcommand*{\sectionautorefname}{Section}
\renewcommand*{\subsectionautorefname}{Section}
\renewcommand*{\subsubsectionautorefname}{Section}
}
\addto\extrasngerman{
\renewcommand*{\paragraphautorefname}{Absatz}
\renewcommand*{\subparagraphautorefname}{Unterabsatz}
\renewcommand*{\footnoteautorefname}{Fu\"snote}
\renewcommand*{\FancyVerbLineautorefname}{Zeile}
\renewcommand*{\theoremautorefname}{Theorem}
\renewcommand*{\appendixautorefname}{Anhang}
\renewcommand*{\equationautorefname}{Gleichung}
\renewcommand*{\itemautorefname}{Punkt}
}
\providecommand{\subfigureautorefname}{\figureautorefname} % Fix to getting autorefs for subfigures right
}{\relax}
\makeatother

%----------------------------------------------------------------------------------------

\usepackage{classicthesis} 

%----------------------------------------------------------------------------------------
%	CHANGING TEXT AREA 
%----------------------------------------------------------------------------------------

%\linespread{1.05} % a bit more for Palatino
%\areaset[current]{312pt}{761pt} % 686 (factor 2.2) + 33 head + 42 head \the\footskip
%\setlength{\marginparwidth}{7em}%
%\setlength{\marginparsep}{2em}%

%----------------------------------------------------------------------------------------
%	USING DIFFERENT FONTS
%----------------------------------------------------------------------------------------

%\usepackage[oldstylenums]{kpfonts} % oldstyle notextcomp
%\usepackage[osf]{libertine}
%\usepackage[light,condensed,math]{iwona}
%\renewcommand{\sfdefault}{iwona}
%\usepackage{lmodern} % <-- no osf support :-(
%\usepackage{cfr-lm} % 
%\usepackage[urw-garamond]{mathdesign} <-- no osf support :-(
%\usepackage[default,osfigures]{opensans} % scale=0.95 
%\usepackage[sfdefault]{FiraSans}