PS5 UART Error Code Decoder

Human Slop polished with AI Slop

This repository contains two main components for working with PS5 UART error codes:

1. Pi Pico UF2 Firmware
2. Windows-Based GUI Tool

---

1. Pi Pico UF2 Firmware

This firmware runs on the Raspberry Pi Pico microcontroller and uses GPIO 0 and GPIO 1 pins as a USB-TTL serial adapter.

Features

• Implements USB-TTL serial communication via GPIO 0 (TX) and GPIO 1 (RX)
• Compatible with standard serial terminal programs
• Enables PS5 UART error code data collection through USB
• Enables Automatic Checksum of UART commands for use with third party terminals such as Putty

Usage

1. Flash the provided UF2 firmware file onto your Raspberry Pi Pico.
2. Connect the Pico to the PS5 UART lines via GPIO 0 and GPIO 1.
3. Plug the Pico into your PC via USB.
4. The Pico will enumerate as a USB serial device for UART communication.

---

2. Windows-Based GUI Tool

A simple Windows graphical user interface tool designed to:

• Collect UART data from the Pi Pico USB serial device
• Decode PS5 UART error codes in real-time
• Display error information clearly for troubleshooting

Features

• Auto-detects connected Pi Pico USB serial device
• Parses and decodes PS5-specific UART error codes
• Provides user-friendly error descriptions and status
• Logs error data for later analysis

Usage

1. Connect the Raspberry Pi Pico running the UF2 firmware to your Windows PC.
2. Launch the GUI tool.
3. Select the correct COM port if not auto-detected.
4. Start monitoring to collect and decode UART error codes from your PS5.

---

Requirements

• Raspberry Pi Pico board
• Windows PC for GUI tool
• USB cable for Pico connection

---

Installation & Setup

Firmware

1. Download the latest UF2 firmware from the releases section.
2. Hold the BOOTSEL button on the Pico while plugging it into USB.
3. Drag and drop the UF2 file onto the mounted drive.

GUI Tool

• Run the executable or build from source (if applicable).
• Ensure the Pico is connected and recognized as a serial device.

---

Contributing

Contributions and suggestions are welcome! Please open issues or pull requests for improvements, bug fixes, or feature requests.

---

Support Me

If you find this project useful, please consider supporting me:

Or simply click here: https://www.paypal.me/dannyjohn08

---

License

Specify your license here (e.g., MIT, GPL, etc.)

---

Contact

For questions or support, please open an issue or contact me directly.

error_databases CODES from Console Service Tool & uartcodes.com