diff --git a/python/sedona/spark/geopandas/base.py b/python/sedona/spark/geopandas/base.py
index 468303e759..1b7e053691 100644
--- a/python/sedona/spark/geopandas/base.py
+++ b/python/sedona/spark/geopandas/base.py
@@ -608,8 +608,73 @@ def centroid(self):
         """
         return _delegate_to_geometry_column("centroid", self)
 
-    # def concave_hull(self, ratio=0.0, allow_holes=False):
-    #     raise NotImplementedError("This method is not implemented yet.")
+    def concave_hull(self, ratio=0.0, allow_holes=False):
+        """Return a ``GeoSeries`` of geometries representing the concave hull
+        of vertices of each geometry.
+
+        The concave hull of a geometry is the smallest concave `Polygon`
+        containing all the points in each geometry, unless the number of points
+        in the geometric object is less than three. For two points, the concave
+        hull collapses to a `LineString`; for 1, a `Point`.
+
+        The hull is constructed by removing border triangles of the Delaunay
+        Triangulation of the points as long as their "size" is larger than the
+        maximum edge length ratio and optionally allowing holes. The edge length factor
+        is a fraction of the length difference between the longest and shortest edges
+        in the Delaunay Triangulation of the input points. For further information
+        on the algorithm used, see
+        https://libgeos.org/doxygen/classgeos_1_1algorithm_1_1hull_1_1ConcaveHull.html
+
+        Parameters
+        ----------
+        ratio : float, (optional, default 0.0)
+            Number in the range [0, 1]. Higher numbers will include fewer vertices
+            in the hull.
+        allow_holes : bool, (optional, default False)
+            If set to True, the concave hull may have holes.
+
+        Examples
+        --------
+        >>> from sedona.spark.geopandas import GeoSeries
+        >>> from shapely.geometry import Polygon, LineString, Point, MultiPoint
+        >>> s = GeoSeries(
+        ...     [
+        ...         Polygon([(0, 0), (1, 1), (0, 1)]),
+        ...         LineString([(0, 0), (1, 1), (1, 0)]),
+        ...         MultiPoint([(0, 0), (1, 1), (0, 1), (1, 0), (0.5, 0.5)]),
+        ...         MultiPoint([(0, 0), (1, 1)]),
+        ...         Point(0, 0),
+        ...     ],
+        ...     crs=3857
+        ... )
+        >>> s
+        0                       POLYGON ((0 0, 1 1, 0 1, 0 0))
+        1                           LINESTRING (0 0, 1 1, 1 0)
+        2    MULTIPOINT ((0 0), (1 1), (0 1), (1 0), (0.5 0...
+        3                            MULTIPOINT ((0 0), (1 1))
+        4                                          POINT (0 0)
+        dtype: geometry
+
+        >>> s.concave_hull()
+        0                      POLYGON ((0 1, 1 1, 0 0, 0 1))
+        1                      POLYGON ((0 0, 1 1, 1 0, 0 0))
+        2    POLYGON ((0.5 0.5, 0 1, 1 1, 1 0, 0 0, 0.5 0.5))
+        3                               LINESTRING (0 0, 1 1)
+        4                                         POINT (0 0)
+        dtype: geometry
+
+        See Also
+        --------
+        GeoSeries.convex_hull : convex hull geometry
+
+        Notes
+        -----
+        The algorithms considers only vertices of each geometry. As a result the
+        hull may not fully enclose input geometry. If that happens, increasing ``ratio``
+        should resolve the issue.
+
+        """
+        return _delegate_to_geometry_column("concave_hull", self, ratio, allow_holes)
 
     @property
     def convex_hull(self):
diff --git a/python/sedona/spark/geopandas/geoseries.py b/python/sedona/spark/geopandas/geoseries.py
index 4fbccdcf96..34327ea590 100644
--- a/python/sedona/spark/geopandas/geoseries.py
+++ b/python/sedona/spark/geopandas/geoseries.py
@@ -972,9 +972,12 @@ def centroid(self) -> "GeoSeries":
             returns_geom=True,
         )
 
-    def concave_hull(self, ratio=0.0, allow_holes=False):
-        # Implementation of the abstract method.
-        raise NotImplementedError("This method is not implemented yet.")
+    def concave_hull(self, ratio=0.0, allow_holes=False) -> "GeoSeries":
+        spark_expr = stf.ST_ConcaveHull(self.spark.column, ratio, allow_holes)
+        return self._query_geometry_column(
+            spark_expr,
+            returns_geom=True,
+        )
 
     @property
     def convex_hull(self) -> "GeoSeries":
diff --git a/python/tests/geopandas/test_geoseries.py b/python/tests/geopandas/test_geoseries.py
index 74cbff8970..14c1afe296 100644
--- a/python/tests/geopandas/test_geoseries.py
+++ b/python/tests/geopandas/test_geoseries.py
@@ -1238,7 +1238,34 @@ def test_centroid(self):
         self.check_sgpd_equals_gpd(result, expected)
 
     def test_concave_hull(self):
-        pass
+        s = GeoSeries(
+            [
+                Polygon([(0, 0), (1, 1), (0, 1)]),
+                LineString([(0, 0), (1, 1), (1, 0)]),
+                MultiPoint([(0, 0), (1, 1), (0, 1), (1, 0), (0.5, 0.5)]),
+                MultiPoint([(0, 0), (1, 1)]),
+                Point(0, 0),
+            ],
+            crs=3857,
+        )
+
+        result = s.concave_hull()
+
+        expected = gpd.GeoSeries(
+            [
+                Polygon([(0, 1), (1, 1), (0, 0), (0, 1)]),
+                Polygon([(0, 0), (1, 1), (1, 0), (0, 0)]),
+                Polygon([(0.5, 0.5), (0, 1), (1, 1), (1, 0), (0, 0), (0.5, 0.5)]),
+                LineString([(0, 0), (1, 1)]),
+                Point(0, 0),
+            ],
+            crs=3857,
+        )
+        self.check_sgpd_equals_gpd(result, expected)
+
+        # Check if GeoDataFrame works as well
+        df_result = s.to_geoframe().concave_hull()
+        self.check_sgpd_equals_gpd(df_result, expected)
 
     def test_convex_hull(self):
         s = GeoSeries(
diff --git a/python/tests/geopandas/test_match_geopandas_series.py b/python/tests/geopandas/test_match_geopandas_series.py
index fc5bc27187..ab2feac1a9 100644
--- a/python/tests/geopandas/test_match_geopandas_series.py
+++ b/python/tests/geopandas/test_match_geopandas_series.py
@@ -722,8 +722,35 @@ def test_centroid(self):
             gpd_result = gpd.GeoSeries(geom).centroid
             self.check_sgpd_equals_gpd(sgpd_result, gpd_result)
 
+    @pytest.mark.skipif(
+        parse_version(gpd.__version__) < parse_version("0.14.0"),
+        reason="geopandas concave_hull requires version 0.14.0 or higher",
+    )
     def test_concave_hull(self):
-        pass
+        for geom in self.geoms:
+            sgpd_result = GeoSeries(geom).concave_hull()
+            gpd_result = gpd.GeoSeries(geom).concave_hull()
+            self.check_sgpd_equals_gpd(sgpd_result, gpd_result)
+
+        # Test slightly complex geometry for different ratio and allow_holes settings
+        geom = [
+            Polygon(
+                [(0, 0), (0, 4), (1, 4), (1, 1), (3, 1), (3, 4), (4, 4), (4, 0), (0, 0)]
+            )
+        ]
+        for ratio, allow_holes in [(0.5, True), (1.0, True)]:
+            sgpd_result = GeoSeries(geom).concave_hull(
+                ratio=ratio, allow_holes=allow_holes
+            )
+            gpd_result = gpd.GeoSeries(geom).concave_hull(
+                ratio=ratio, allow_holes=allow_holes
+            )
+            self.check_sgpd_equals_gpd(sgpd_result, gpd_result)
+
+        mixed = [self.points[1], self.linestrings[1], self.polygons[1], None]
+        sgpd_result = GeoSeries(mixed).concave_hull()
+        gpd_result = gpd.GeoSeries(mixed).concave_hull()
+        self.check_sgpd_equals_gpd(sgpd_result, gpd_result)
 
     def test_convex_hull(self):
         for geom in self.geoms: