Skip to content

materials.md

Latest commit

 

History

History
1451 lines (944 loc) · 39.8 KB

materials.md

File metadata and controls

1451 lines (944 loc) · 39.8 KB
Raw

Editor materials

Palette modules and their parameters.

kind is the crate.patch key. A menu param is an index, a switch is 0 or 1. A cable into a param jack is CV. Unipolar sources (ADSR, clocks) map 0 to min and 1 to max. Bipolar sources (LFO) map -1..1 across that range. At most ten param jacks (MAX_CV_JACKS).

Generated from the catalog. After an AudioMaterial change, run:

npm run test:editor

Amp, Grain, Synth, Space Reverb, and IR are WASM kernels, not ASL.

Contents

Tools

Keyboard (keyboard)

Host note source. cv is last-note 1V/oct. note/gate/velocity cables allocate poly voices.

  • Jacks: in none / out cv, gate, trig, velocity

No parameters.

Line / Mic (line)

Live input from this machine's audio interface or mic. Device assignment is not sent to a session.

  • Jacks: in none / out audio

No parameters.

MIDI In (midiin)

Live MIDI input from one device on this machine. Device assignment is not sent to a session. Last-note analog like Keyboard. Channel 0 is omni. note/gate cables allocate poly voices.

  • Jacks: in none / out cv, gate, trig, velocity, note, cc

No parameters.

MIDI Out (midiout)

Live MIDI output to one device on this machine. Device assignment is not sent to a session. Gate holds the voice. Trig is the event: a pulse plus a note. Channel and message do sync.

  • Jacks: in note, cv(cv), gate, trig, velocity, cc(cv) / out none

No parameters.

MIDI Clip (midiclip)

Piano-roll clip. Start, loop, pitch, rate, and velocity match Sample Player.

  • Jacks: in none / out cv, gate, trig, velocity

No parameters.

Master (master)

The only output. Patch here to hear it.

  • Jacks: in input(audio) / out none

No parameters.

Sources

Oscillator (oscillator)

Keyboard voice. Eight waves, octave and detune, a short amp envelope.

  • Jacks: in note, gate, velocity, gain(cv), width(cv), octave(cv), detune(cv), attack(cv), decay(cv), sustain(cv), release(cv) / out audio
  • Voices: 8 (oldest steal)
Param Control Range Default CV
type menu 0 Sine, 1 Saw, 2 Square, 3 Triangle, 4 Pulse, 5 VarShape, 6 SuperSquare, 7 Harmonic Saw
width fader 0..1 0.5 yes
octave stepper -2..2 step 1 0 yes
detune fader -100..100 ct 0 ct yes
gain fader 0..1 0.4 yes
attack fader 0.001..2 s exp 0.01 s yes
decay fader 0.001..2 s exp 0.08 s yes
sustain fader 0..1 0.7 yes
release fader 0.001..4 s exp 0.2 s yes

Tone (tone)

Free-running sine. Sounds on Play without a Keyboard. freq is a CV jack.

  • Jacks: in freq(cv), gain(cv) / out audio
Param Control Range Default CV
freq fader 20..4000 Hz log 220 Hz yes
gain fader 0..1 0.22 yes

Noise (noise)

Six spectral colors through a lowpass. White is flat, brown is rumble, blue and violet get brighter.

  • Jacks: in gain(cv), cutoff(cv) / out audio
Param Control Range Default CV
color menu 0 White, 1 Pink, 2 Brown, 3 Blue, 4 Violet, 5 Grey White
gain fader 0..1 0.2 yes
cutoff fader 80..16000 Hz log 4000 Hz yes

Impulse (impulse)

A one-sample click on a rising gate. For pinging filters and starting envelopes.

  • Jacks: in input(audio) / out audio

No parameters.

Wavetable (wavetable)

Polyphonic scanner over eight single-cycle frames, or a loaded table of 256-sample frames.

  • Jacks: in note, gate, velocity, position(cv), octave(cv), detune(cv), gain(cv), attack(cv), release(cv) / out audio
  • Voices: 8 (oldest steal)
  • File: Optional table. 512+ samples become 256-sample frames. Clear restores the factory bank.
Param Control Range Default CV
position fader 0..1 0.28 yes
octave stepper -2..2 step 1 0 yes
detune fader -100..100 ct 0 ct yes
gain fader 0..1 0.4 yes
attack fader 0.001..2 s exp 0.01 s yes
decay fader 0.001..2 s exp 0.08 s
sustain fader 0..1 0.7
release fader 0.001..4 s exp 0.2 s yes

Sample Player (sampleplayer)

Plays a loaded file on a gate. Silent until you choose a file. Pitch is semitones.

  • Jacks: in input(audio), rate(cv), start(cv), pitch(cv), gain(cv), loop(cv) / out audio
  • File: Sample. Silent until a file is loaded.
Param Control Range Default CV
rate fader 0.25..4 1 yes
start fader 0..1 0 yes
loop switch 0 One-shot, 1 Loop One-shot yes
pitch fader -12..12 st 0 st yes
gain fader 0..2 0.85 yes

Synth Voice (SynthVoice)

Subtractive voice: wave plus a detuned twin, a lowpass, and an amp envelope that can open the filter.

  • Jacks: in note, gate, velocity, cutoff(cv), resonance(cv), envAmt(cv), gain(cv), unison(cv), width(cv), attack(cv), release(cv) / out audio
  • Voices: 8 (oldest steal)
Param Control Range Default CV
type menu 0 Sine, 1 Saw, 2 Square, 3 Triangle, 4 Pulse, 5 VarShape, 6 SuperSquare, 7 Harmonic Saw
width fader 0..1 0.5 yes
octave stepper -2..2 step 1 0
detune fader -100..100 ct 0 ct
unison fader 0..1 0.22 yes
cutoff fader 80..12000 Hz log 2000 Hz yes
resonance fader 0.3..8 0.8 yes
envAmt fader -1..2 0.35 yes
attack fader 0.001..2 s exp 0.01 s yes
decay fader 0.001..2 s exp 0.12 s
sustain fader 0..1 0.6
release fader 0.001..4 s exp 0.35 s yes
gain fader 0..1 0.7 yes

Filters

Lowpass (lowpass)

RBJ biquad lowpass. Cutoff and Q.

  • Jacks: in input(audio), cutoff(cv), q(cv) / out audio
Param Control Range Default CV
cutoff fader 20..20000 Hz log 1000 Hz yes
q fader 0.1..10 0.71 yes

Highpass (highpass)

RBJ biquad highpass. Cutoff and Q.

  • Jacks: in input(audio), cutoff(cv), q(cv) / out audio
Param Control Range Default CV
cutoff fader 20..20000 Hz log 200 Hz yes
q fader 0.1..10 0.71 yes

Bandpass (bandpass)

RBJ biquad bandpass. Cutoff and Q.

  • Jacks: in input(audio), cutoff(cv), q(cv) / out audio
Param Control Range Default CV
cutoff fader 20..20000 Hz log 1000 Hz yes
q fader 0.1..20 1 yes

Notch (notch)

RBJ biquad notch. Cutoff and Q.

  • Jacks: in input(audio), cutoff(cv), q(cv) / out audio
Param Control Range Default CV
cutoff fader 20..20000 Hz log 1000 Hz yes
q fader 0.1..20 1 yes

Low Shelf (lowshelf)

Low shelf. Gain at 0 dB is dry.

  • Jacks: in input(audio), freq(cv), gainDb(cv), q(cv) / out audio
Param Control Range Default CV
freq fader 20..20000 Hz log 80 Hz yes
gainDb fader -18..18 dB 0 dB yes
q fader 0.1..10 0.71 yes

High Shelf (highshelf)

High shelf. Gain at 0 dB is dry.

  • Jacks: in input(audio), freq(cv), gainDb(cv), q(cv) / out audio
Param Control Range Default CV
freq fader 20..20000 Hz log 8000 Hz yes
gainDb fader -18..18 dB 0 dB yes
q fader 0.1..10 0.71 yes

Allpass (allpass)

Phase shift without an amplitude change. Cutoff and Q.

  • Jacks: in input(audio), cutoff(cv), q(cv) / out audio
Param Control Range Default CV
cutoff fader 20..20000 Hz log 1000 Hz yes
q fader 0.1..10 0.71 yes

1-Pole Lowpass (onepolelowpass)

Gentle one-pole lowpass. Cheap and well behaved when the cutoff moves.

  • Jacks: in input(audio), cutoff(cv) / out audio
Param Control Range Default CV
cutoff fader 20..20000 Hz log 1000 Hz yes

1-Pole Highpass (onepolehighpass)

Gentle one-pole highpass.

  • Jacks: in input(audio), cutoff(cv) / out audio
Param Control Range Default CV
cutoff fader 20..20000 Hz log 200 Hz yes

SVF Lowpass (svflowpass)

State-variable lowpass. Stays stable when cutoff is modulated hard.

  • Jacks: in input(audio), cutoff(cv), q(cv) / out audio
Param Control Range Default CV
cutoff fader 20..20000 Hz log 1000 Hz yes
q fader 0.1..20 0.5 yes

SVF Highpass (svfhighpass)

State-variable highpass.

  • Jacks: in input(audio), cutoff(cv), q(cv) / out audio
Param Control Range Default CV
cutoff fader 20..20000 Hz log 200 Hz yes
q fader 0.1..20 0.5 yes

SVF Bandpass (svfbandpass)

State-variable bandpass.

  • Jacks: in input(audio), cutoff(cv), q(cv) / out audio
Param Control Range Default CV
cutoff fader 20..20000 Hz log 1000 Hz yes
q fader 0.1..20 0.5 yes

Ladder (ladder)

Resonant ladder lowpass. Resonance has character.

  • Jacks: in input(audio), cutoff(cv), resonance(cv), drive(cv) / out audio
Param Control Range Default CV
cutoff fader 20..20000 Hz log 1000 Hz yes
resonance fader 0..0.99 0 yes
drive fader 1..8 1 yes

Comb (comb)

Tuned comb. freq is the tooth spacing.

  • Jacks: in input(audio), freq(cv), feedback(cv), mix(cv) / out audio
Param Control Range Default CV
freq fader 20..4000 Hz log 440 Hz yes
feedback fader 0..0.95 0.5 yes
mix fader 0..1 0.5 yes

LP 12 dB (slopelowpass12)

Fixed 12 dB/oct lowpass. No resonance control.

  • Jacks: in input(audio), cutoff(cv) / out audio
Param Control Range Default CV
cutoff fader 20..20000 Hz log 1000 Hz yes

LP 24 dB (slopelowpass24)

Fixed 24 dB/oct lowpass. No resonance control.

  • Jacks: in input(audio), cutoff(cv) / out audio
Param Control Range Default CV
cutoff fader 20..20000 Hz log 1000 Hz yes

HP 12 dB (slopehighpass12)

Fixed 12 dB/oct highpass. No resonance control.

  • Jacks: in input(audio), cutoff(cv) / out audio
Param Control Range Default CV
cutoff fader 20..20000 Hz log 200 Hz yes

Parametric EQ (ParametricEQ)

Four-band channel EQ plus highpass and lowpass. Gains at 0 dB and filters off are dry.

  • Jacks: in input(audio), hpFreq(cv), lowFreq(cv), lowGain(cv), lowMidFreq(cv), lowMidGain(cv), highMidFreq(cv), highMidGain(cv), highGain(cv), lpFreq(cv) / out audio
Param Control Range Default CV
hpOn switch 0 Off, 1 On Off
hpFreq fader 20..2000 Hz log 80 Hz yes
hpQ fader 0.3..2 0.71
lowType menu 0 Shelf, 1 Peak Shelf
lowFreq fader 20..500 Hz log 100 Hz yes
lowGain fader -18..18 dB 0 dB yes
lowQ fader 0.3..2 0.7
lowMidFreq fader 80..2000 Hz log 400 Hz yes
lowMidGain fader -18..18 dB 0 dB yes
lowMidQ fader 0.1..10 1
highMidFreq fader 400..8000 Hz log 2500 Hz yes
highMidGain fader -18..18 dB 0 dB yes
highMidQ fader 0.1..10 1
highType menu 0 Shelf, 1 Peak Shelf
highFreq fader 2000..20000 Hz log 8000 Hz
highGain fader -18..18 dB 0 dB yes
highQ fader 0.3..2 0.7
lpOn switch 0 Off, 1 On Off
lpFreq fader 1000..20000 Hz log 12000 Hz yes
lpQ fader 0.3..2 0.71

Dynamics

Compressor (compressor)

Downward compressor with makeup and mix. Mix at 0 is dry.

  • Jacks: in input(audio), threshold(cv), ratio(cv), attack(cv), release(cv), makeup(cv), mix(cv) / out audio
Param Control Range Default CV
threshold fader 0.01..1 0.5 yes
ratio fader 1..20 4 yes
attack fader 0.001..0.2 s exp 0.01 s yes
release fader 0.01..1 s exp 0.05 s yes
makeup fader 0..4 1 yes
mix fader 0..1 1 yes

Limiter (limiter)

Compressor locked to a high ratio.

  • Jacks: in input(audio), threshold(cv), attack(cv), release(cv) / out audio
Param Control Range Default CV
threshold fader 0.01..1 0.89 yes
attack fader 0.001..0.05 s exp 0 s yes
release fader 0.01..1 s exp 0.05 s yes

Gate (gate)

Opens when the envelope is above threshold.

  • Jacks: in input(audio), threshold(cv), attack(cv), release(cv), hold(cv) / out audio
Param Control Range Default CV
threshold fader 0.001..1 0.05 yes
attack fader 0.001..0.2 s exp 0 s yes
release fader 0.01..1 s exp 0.05 s yes
hold fader 0..0.5 s 0 s yes

Expander (expander)

Turns quiet signals down.

  • Jacks: in input(audio), threshold(cv), ratio(cv), attack(cv), release(cv) / out audio
Param Control Range Default CV
threshold fader 0.01..1 0.25 yes
ratio fader 1..20 2 yes
attack fader 0.001..0.2 s exp 0.01 s yes
release fader 0.01..1 s exp 0.05 s yes

Transient (transient)

Boosts or cuts attack and sustain without a threshold.

  • Jacks: in input(audio), attack(cv), sustain(cv) / out audio
Param Control Range Default CV
attack fader -1..1 0 yes
sustain fader -1..1 0 yes

Ducker (ducker)

Turns the main signal down when the sidechain is loud.

  • Jacks: in input(audio), sidechain(audio), amount(cv), attack(cv), release(cv) / out audio
Param Control Range Default CV
amount fader 0..1 0.8 yes
attack fader 0.001..0.5 s exp 0.01 s yes
release fader 0.005..2 s exp 0.2 s yes

SC Comp (sidechaincomp)

Compressor keyed by a second audio inlet named sidechain.

  • Jacks: in input(audio), sidechain(audio), threshold(cv), ratio(cv), attack(cv), release(cv) / out audio
Param Control Range Default CV
threshold fader 0..1 0.5 yes
ratio fader 1..20 4 yes
attack fader 0.001..0.5 s exp 0.01 s yes
release fader 0.005..2 s exp 0.05 s yes

SC Gate (sidechaingate)

Gate keyed by a second audio inlet named sidechain.

  • Jacks: in input(audio), sidechain(audio), threshold(cv), attack(cv), release(cv), hold(cv) / out audio
Param Control Range Default CV
threshold fader 0..1 0.1 yes
attack fader 0.001..0.5 s exp 0 s yes
release fader 0.005..2 s exp 0.1 s yes
hold fader 0..0.5 s 0 s yes

Shape

Soft Clip (softclip)

Smooth tanh saturation. Drive into it.

  • Jacks: in input(audio), drive(cv) / out audio
Param Control Range Default CV
drive fader 0.1..16 1 yes

Hard Clip (hardclip)

Hard ceiling. Drive into it.

  • Jacks: in input(audio), drive(cv) / out audio
Param Control Range Default CV
drive fader 0.1..16 1 yes

Bitcrush (bitcrush)

Lowers amplitude resolution. 16 bits is effectively clean.

  • Jacks: in input(audio), bits(cv) / out audio
Param Control Range Default CV
bits stepper 1..16 step 1 8 yes

Downsample (downsample)

Lowers time resolution. Factor is how many samples to hold.

  • Jacks: in input(audio), factor(cv) / out audio
Param Control Range Default CV
factor stepper 1..64 step 1 4 yes

Full Rectify (fullrectify)

Absolute value. Turns bipolar audio into unipolar.

  • Jacks: in input(audio) / out audio

No parameters.

Half Rectify (halfrectify)

Keeps the positive half, zeros the rest.

  • Jacks: in input(audio) / out audio

No parameters.

Waveshape (waveshape)

Drive into a transfer curve, then mix with dry. Mix at 0 is bypass.

  • Jacks: in input(audio), drive(cv), mix(cv) / out audio
Param Control Range Default CV
curve menu 0 Soft, 1 Hard, 2 Fold, 3 Asym, 4 Sine Soft
drive fader 0.25..12 exp 1.6 yes
mix fader 0..1 1 yes

Ring Mod (ringmod)

Multiplies the input by a sine at freq.

  • Jacks: in input(audio), freq(cv), mix(cv) / out audio
Param Control Range Default CV
freq fader 1..4000 Hz log 220 Hz yes
mix fader 0..1 1 yes

Time

Delay (delay)

Echo with feedback. Mix at 0 is dry.

  • Jacks: in input(audio), timeSec(cv), feedback(cv), mix(cv) / out audio
Param Control Range Default CV
timeSec fader 0..2 s exp 0.25 s yes
feedback fader 0..0.95 0.3 yes
mix fader 0..1 0.35 yes

Reverb (reverb)

Six-comb tank plus two allpass-ish delays. Mix at 0 is dry.

  • Jacks: in input(audio), size(cv), decay(cv), damp(cv), mix(cv) / out audio
Param Control Range Default CV
size fader 0.3..1.4 0.85 yes
decay fader 0..0.92 0.72 yes
damp fader 200..12000 Hz log 4500 Hz yes
mix fader 0..1 0.28 yes

Synced Delay (synceddelay)

Delay time is a note length, so it follows tempo.

  • Jacks: in input(audio), division(cv), feedback(cv), mix(cv) / out audio
Param Control Range Default CV
division menu 0 1/1, 1 1/2, 2 1/2., 3 1/4, 4 1/4., 5 1/4T, 6 1/8, 7 1/8., 8 1/8T, 9 1/16, 10 1/16T 1/8 yes
feedback fader 0..0.95 0.4 yes
mix fader 0..1 0.35 yes

Pitch Shift (pitchshift)

Granular pitch shift in semitones. Mix at 0 is dry.

  • Jacks: in input(audio), pitch(cv), mix(cv) / out audio
Param Control Range Default CV
pitch fader -12..12 st 0 st yes
mix fader 0..1 1 yes

Reverse (reverse)

Plays short windows of the input backwards.

  • Jacks: in input(audio), timeSec(cv) / out audio
Param Control Range Default CV
timeSec fader 0.01..2 s exp 0.25 s yes

Looper (looper)

Record captures. Play starts or restarts the loop, and closes a take when Record is still held. Bars 0 is free-running up to the ring. N bars auto-closes on that many measures. Threshold 0 is off; above 0, Record arms until a peak. Quantize snaps a free take. Start is a one-sample pulse on the first play sample after a take closes and on every wrap. End is a one-sample pulse on the last sample of the loop. Mix at 0 is dry.

  • Jacks: in input(audio), record(cv), play(cv), overdub(cv), undo(cv), length(cv), threshold(cv), quantize(cv), mix(cv), clear(cv) / out audio, start, end
Param Control Range Default CV
record switch 0 Off, 1 Record Off yes
play switch 0 Stop, 1 Play Play yes
overdub switch 0 Off, 1 Overdub Off yes
undo switch 0 Ready, 1 Undo Ready yes
length stepper 0..16 step 1 0 yes
threshold fader 0..1 0 yes
quantize menu 0 Free, 1 Beat, 2 Bar Free yes
clear switch 0 Ready, 1 Clear Ready yes
mix fader 0..1 1 yes

Transport (transport)

Host tempo and time signature. Params publish bpm, beatsPerBar, and beatUnit. Outlets are those fields plus beats, bars, playing, and a quarter-note pulse. Clock is free-running Hz. Synced Clock reads this snapshot.

  • Jacks: in bpm(cv), beatsPerBar(cv), beatUnit(cv) / out bpm, beats, bars, playing, beatsPerBar, beatUnit, pulse
Param Control Range Default CV
bpm fader 20..300 bpm 120 bpm yes
beatsPerBar stepper 1..16 step 1 4 yes
beatUnit stepper 1..16 step 1 4 yes

Clock (clock)

Free-running pulse train. Output is CV, not audio.

  • Jacks: in reset, freq(cv) / out cv
  • Outlet: unipolar CV (jack name cv)
Param Control Range Default CV
freq fader 0.1..40 Hz log 2 Hz yes
reset fader 0..1 0

Synced Clock (syncedclock)

A pulse on each tempo division. Output is CV.

  • Jacks: in division(cv) / out cv
  • Outlet: unipolar CV (jack name cv)
Param Control Range Default CV
division menu 0 1/1, 1 1/2, 2 1/2., 3 1/4, 4 1/4., 5 1/4T, 6 1/8, 7 1/8., 8 1/8T, 9 1/16, 10 1/16T 1/4 yes

Clock Divide (clockdivide)

Passes one pulse every N incoming pulses.

  • Jacks: in input(audio), reset, factor(cv) / out cv
  • Outlet: unipolar CV (jack name cv)
Param Control Range Default CV
factor stepper 1..64 step 1 2 yes
reset fader 0..1 0

Clock Multiply (clockmultiply)

Emits extra pulses between incoming ones.

  • Jacks: in input(audio), reset, factor(cv) / out cv
  • Outlet: unipolar CV (jack name cv)
Param Control Range Default CV
factor stepper 1..16 step 1 2 yes
reset fader 0..1 0

Pulse (pulse)

Turns an edge into a pulse of widthSec.

  • Jacks: in input(audio), widthSec(cv) / out cv
  • Outlet: unipolar CV (jack name cv)
Param Control Range Default CV
widthSec fader 0.001..2 s exp 0.01 s yes

Trigger (trigger)

Fires when the input crosses threshold upward.

  • Jacks: in input(audio), threshold(cv) / out cv
  • Outlet: unipolar CV (jack name cv)
Param Control Range Default CV
threshold fader -1..1 0.5 yes

Sequencer (sequencer)

Eight stepped values advanced by a clock. Output is CV.

  • Jacks: in clock, reset, step0(cv), step1(cv), step2(cv), step3(cv), step4(cv), step5(cv), step6(cv), step7(cv) / out cv
Param Control Range Default CV
clock fader 0..1 0
step0 fader -1..1 0 yes
step1 fader -1..1 0.25 yes
step2 fader -1..1 0.5 yes
step3 fader -1..1 0.75 yes
step4 fader -1..1 1 yes
step5 fader -1..1 0.75 yes
step6 fader -1..1 0.5 yes
step7 fader -1..1 0.25 yes
reset fader 0..1 0

Smooth Random (randomsmooth)

Smooth random bipolar CV at freq.

  • Jacks: in freq(cv) / out audio(cv)
Param Control Range Default CV
freq fader 0.1..40 Hz log 4 Hz yes

Stepped Random (randomstepped)

Stepped random bipolar CV at freq.

  • Jacks: in freq(cv) / out audio(cv)
Param Control Range Default CV
freq fader 0.1..40 Hz log 8 Hz yes

Synced Ramp (syncedramp)

A 0..1 ramp locked to a tempo division.

  • Jacks: in division(cv), depth(cv) / out cv
  • Outlet: unipolar CV (jack name cv)
Param Control Range Default CV
division menu 0 1/1, 1 1/2, 2 1/2., 3 1/4, 4 1/4., 5 1/4T, 6 1/8, 7 1/8., 8 1/8T, 9 1/16, 10 1/16T 1/4 yes
depth fader 0..1 1 yes

Synced Tremolo (syncedtremolo)

Amplitude modulation locked to a tempo division.

  • Jacks: in input(audio), division(cv), depth(cv) / out audio
Param Control Range Default CV
division menu 0 1/1, 1 1/2, 2 1/2., 3 1/4, 4 1/4., 5 1/4T, 6 1/8, 7 1/8., 8 1/8T, 9 1/16, 10 1/16T 1/8 yes
depth fader 0..1 0.6 yes

LFO (lfo)

Bipolar control oscillator. Same eight waves as Oscillator, at control rate.

  • Jacks: in reset, rate(cv), amount(cv), width(cv), phase(cv) / out cv
  • Outlet: bipolar CV (jack name cv)
Param Control Range Default CV
type menu 0 Sine, 1 Saw, 2 Square, 3 Triangle, 4 Pulse, 5 VarShape, 6 SuperSquare, 7 Harmonic Sine
width fader 0..1 0.5 yes
rate fader 0.05..20 Hz log 0.4 Hz yes
amount fader 0..1 0.35 yes
phase fader 0..1 0 yes
reset fader 0..1 0

ADSR (adsr)

Note-driven envelope. Times are live. Output is unipolar CV.

  • Jacks: in gate, note, velocity, attack(cv), decay(cv), sustain(cv), release(cv), amount(cv) / out cv
  • Voices: 8 (oldest steal)
  • Outlet: unipolar CV (jack name cv)
Param Control Range Default CV
attack fader 0.001..2 s exp 0.01 s yes
decay fader 0.001..2 s exp 0.12 s yes
sustain fader 0..1 0.7 yes
release fader 0.001..4 s exp 0.25 s yes
amount fader 0..1 1 yes

DAHDSR (dahdsr)

Delay, attack, hold, decay, sustain, release from a gate. Output is CV.

  • Jacks: in input(audio), delay(cv), attack(cv), hold(cv), decay(cv), sustain(cv), release(cv) / out cv
  • Outlet: unipolar CV (jack name cv)
Param Control Range Default CV
delay fader 0..2 s exp 0 s yes
attack fader 0.001..2 s exp 0.01 s yes
hold fader 0..2 s exp 0 s yes
decay fader 0.001..2 s exp 0.1 s yes
sustain fader 0..1 0.7 yes
release fader 0.001..4 s exp 0.2 s yes

Breakpoints (breakpoints)

Four live time/level points from a gate. Later times clamp forward. Output is CV.

  • Jacks: in input(audio), time0(cv), time1(cv), time2(cv), time3(cv), level0(cv), level1(cv), level2(cv), level3(cv) / out cv
  • Outlet: unipolar CV (jack name cv)
Param Control Range Default CV
time0 fader 0..4 s exp 0 s yes
time1 fader 0..4 s exp 0.01 s yes
time2 fader 0..4 s exp 0.12 s yes
time3 fader 0..4 s exp 0.4 s yes
level0 fader 0..1 0 yes
level1 fader 0..1 1 yes
level2 fader 0..1 0.6 yes
level3 fader 0..1 0 yes

Env Follow (envfollow)

Amplitude of the input as a control signal.

  • Jacks: in input(audio), attack(cv), release(cv) / out cv
  • Outlet: unipolar CV (jack name cv)
Param Control Range Default CV
attack fader 0.001..1 s exp 0.01 s yes
release fader 0.001..2 s exp 0.1 s yes

Control

Control (control)

A constant you can automate or patch. Output is CV.

  • Jacks: in value(cv) / out audio(cv)
Param Control Range Default CV
value fader -1..1 0 yes

Offset (offset)

Adds a constant to the input.

  • Jacks: in input(audio), amount(cv) / out audio(cv)
Param Control Range Default CV
amount fader -2..2 0 yes

Slew (slew)

Rate limiter with separate rise and fall speeds.

  • Jacks: in input(audio), rise(cv), fall(cv) / out audio(cv)
Param Control Range Default CV
rise fader 0..10000 /s 10 /s yes
fall fader 0..10000 /s 10 /s yes

Sample & Hold (samplehold)

Samples the input at freq and holds it.

  • Jacks: in input(audio), clock, freq(cv) / out audio(cv)
Param Control Range Default CV
freq fader 0..20000 Hz exp 20 Hz yes
clock fader 0..1 0

Compare > (comparegt)

1 when the input is above threshold, else 0.

  • Jacks: in input(audio), threshold(cv) / out audio(cv)
Param Control Range Default CV
threshold fader -1..1 0 yes

Compare < (comparelt)

1 when the input is below threshold, else 0.

  • Jacks: in input(audio), threshold(cv) / out audio(cv)
Param Control Range Default CV
threshold fader -1..1 0 yes

AND (logicand)

AND of the input and other.

  • Jacks: in input(audio), other(cv) / out audio(cv)
Param Control Range Default CV
other fader 0..1 1 yes

OR (logicor)

OR of the input and other.

  • Jacks: in input(audio), other(cv) / out audio(cv)
Param Control Range Default CV
other fader 0..1 0 yes

XOR (logicxor)

XOR of the input and other.

  • Jacks: in input(audio), other(cv) / out audio(cv)
Param Control Range Default CV
other fader 0..1 0 yes

NOT (logicnot)

Inverts a gate.

  • Jacks: in input(audio) / out audio(cv)

No parameters.

Flip Flop (flipflop)

Toggles on each rising edge.

  • Jacks: in input(audio) / out audio(cv)

No parameters.

Quantize (quantize)

Snaps a MIDI-style pitch number to a scale. Root and scale are menus.

  • Jacks: in input(audio), root(cv), scale(cv) / out audio(cv)
Param Control Range Default CV
root menu 0 C, 1 C#, 2 D, 3 D#, 4 E, 5 F, 6 F#, 7 G, 8 G#, 9 A, 10 A#, 11 B C yes
scale menu 0 major, 1 minor, 2 pentatonic, 3 chromatic, 4 wholeTone major yes

Euclidean (euclidean)

Evenly spaced hits across a step count, advanced by a clock.

  • Jacks: in clock, reset, steps(cv), hits(cv), rotation(cv) / out cv
  • Outlet: unipolar CV (jack name cv)
Param Control Range Default CV
clock fader 0..1 0
steps stepper 1..32 step 1 8 yes
hits stepper 0..32 step 1 3 yes
rotation stepper 0..31 step 1 0 yes
reset fader 0..1 0

RMS (rms)

Windowed RMS of the input, as CV.

  • Jacks: in input(audio), windowSec(cv) / out audio(cv)
Param Control Range Default CV
windowSec fader 0.005..0.5 s exp 0.05 s yes

Peak (peak)

Peak follower with a release time, as CV.

  • Jacks: in input(audio), release(cv) / out audio(cv)
Param Control Range Default CV
release fader 0.01..2 s exp 0.3 s yes

Onset (onset)

Fires a pulse when a transient crosses threshold.

  • Jacks: in input(audio), threshold(cv) / out audio(cv)
Param Control Range Default CV
threshold fader 0.001..0.5 0.05 yes

Routing

Gain (gain)

Multiply. Gain at 1 is unity.

  • Jacks: in input(audio), gain(cv) / out audio
Param Control Range Default CV
gain fader 0..4 1 yes

Mix (mix)

Weighted sum of the main input plus three more constants-or-cables.

  • Jacks: in input(audio), a(cv), b(cv), c(cv) / out audio
Param Control Range Default CV
a fader -1..1 0 yes
b fader -1..1 0 yes
c fader -1..1 0 yes

Audio Mix (audiomix)

Sums a second live audio inlet.

  • Jacks: in input(audio), sidechain(audio), level(cv) / out audio
Param Control Range Default CV
level fader 0..2 1 yes

Audio Multiply (audiomultiply)

Ring modulation by a second live audio inlet.

  • Jacks: in input(audio), sidechain(audio), mix(cv) / out audio
Param Control Range Default CV
mix fader 0..1 1 yes

Crossfade (crossfade)

Crossfade between the main input and a second live inlet.

  • Jacks: in input(audio), sidechain(audio), position(cv) / out audio
Param Control Range Default CV
position fader 0..1 0.5 yes

Input Select (inputselect)

Hard switch between two live audio inlets.

  • Jacks: in input(audio), sidechain(audio), which(cv) / out audio
Param Control Range Default CV
which switch 0 Input, 1 Sidechain Input yes

Select (select)

Chooses between the main input and other.

  • Jacks: in input(audio), other(cv), which(cv) / out audio
Param Control Range Default CV
other fader -1..1 0 yes
which switch 0 Input, 1 Other Input yes

Invert (invert)

Flips polarity.

  • Jacks: in input(audio) / out audio

No parameters.

Bypass (bypass)

Passes the input through. A placeholder in a chain.

  • Jacks: in input(audio) / out audio

No parameters.

DC Block (dcblock)

Removes DC offset.

  • Jacks: in input(audio) / out audio

No parameters.

Analysis

Meter (meter)

Peak and RMS readout, also as CV. Audio still passes through.

  • Jacks: in input(audio) / out audio, peak, rms

No parameters.

Scope (scope)

A window of samples for the inspector. Peak and RMS are CV. Audio still passes through.

  • Jacks: in input(audio) / out audio, peak, rms

No parameters.

Analyzer (analyzer)

Meter plus spectrum. Note, cv, hz, cents, gate, peak, RMS, and LUFS are CV outlets so a patch can follow live playing.

  • Jacks: in input(audio) / out audio, note, cv, hz, cents, gate, peak, rms, lufs

No parameters.

Tuner (tuner)

Pitch readout of the incoming cable. Note, cv, hz, cents, and gate are CV outlets. Audio still passes through.

  • Jacks: in input(audio) / out audio, note, cv, hz, cents, gate

No parameters.

Stereo

Stereo Pan (stereopan)

Track-pan matrix: fold both sides, then equal-power position. Identity at center.

  • Jacks: in input(audio), pan(cv) / out audio
Param Control Range Default CV
pan fader -1..1 0 yes

Balance (balance)

Independent level per side.

  • Jacks: in input(audio), left(cv), right(cv) / out audio
Param Control Range Default CV
left fader 0..2 1 yes
right fader 0..2 1 yes

Auto Pan (autopan)

Pans back and forth at rate.

  • Jacks: in input(audio), rate(cv), depth(cv) / out audio
Param Control Range Default CV
rate fader 0.01..20 Hz log 1 Hz yes
depth fader 0..1 1 yes

Haas (haas)

Width from a short delay on one side.

  • Jacks: in input(audio), delayMs(cv) / out audio
Param Control Range Default CV
delayMs fader 0..30 ms exp 12 ms yes

Width (width)

0 collapses to mono, 1 is unity, above widens. The centre stays put.

  • Jacks: in input(audio), width(cv) / out audio
Param Control Range Default CV
width fader 0..2 1 yes

Mono Sum (monosum)

Folds stereo to mono at the level a correlated pair started at.

  • Jacks: in input(audio) / out audio

No parameters.

Mono Left (monoleft)

Copies the left channel to both sides.

  • Jacks: in input(audio) / out audio

No parameters.

Mono Right (monoright)

Copies the right channel to both sides.

  • Jacks: in input(audio) / out audio

No parameters.

Swap (swap)

Swaps left and right.

  • Jacks: in input(audio) / out audio

No parameters.

M/S Encode (midside)

Stereo to mid/side.

  • Jacks: in input(audio) / out audio

No parameters.

M/S Decode (midsidedecode)

Mid/side back to stereo.

  • Jacks: in input(audio) / out audio

No parameters.

Stereo Merge (stereomerge)

Two live mono inlets into one stereo pair.

  • Jacks: in input(audio), sidechain(audio) / out audio

No parameters.

Pan Left (panleft)

Equal-power gain for the left side of a pan pair.

  • Jacks: in input(audio), pan(cv) / out audio
Param Control Range Default CV
pan fader -1..1 0 yes

Pan Right (panright)

Equal-power gain for the right side of a pan pair.

  • Jacks: in input(audio), pan(cv) / out audio
Param Control Range Default CV
pan fader -1..1 0 yes

Spatial

Spatial Source (spatialsource)

A sound placed in the room. x, y and z are metres, with -z ahead of the listener, and each is a CV jack, so an LFO on x sweeps the source past you. Global makes it omnidirectional. Its outlet is not audio: patch it into a Spatial Master.

  • Jacks: in input(audio), x(cv), y(cv), z(cv), gain(cv) / out audio
Param Control Range Default CV
x fader -32..32 m 0 m yes
y fader -32..32 m 0 m yes
z fader -32..32 m -1 m yes
gain fader 0..4 1 yes
global switch 0 Off, 1 On Off
distanceModel menu 0 Preview, 1 Web HRTF Preview

Spatial Master (spatialmaster)

Sums any number of Spatial Sources, turns the room to face the listener, and decodes it to headphones. Yaw and pitch are the listener's head, not the room. This is the node that goes to Master.

  • Jacks: in input(audio), yaw(cv), pitch(cv), level(cv) / out audio
Param Control Range Default CV
yaw fader -180..180 deg 0 deg yes
pitch fader -90..90 deg 0 deg yes
decode menu 0 Binaural, 1 Stereo, 2 Ambisonic Binaural
level fader 0..2 1 yes

Plugins

Amp (amp)

Neural amp (NAM) plus analog / EQ / reverb / delay. Cabinet lives on an IR node after Amp.

  • Jacks: in input(audio) / out audio
  • Kernel: WASM. Cannot flatten to a crate.plugin graph.
  • File: NAM profile (.nam). No profile is the analog path.
Param Range Default
inputGain 0..4 lin 1
outputGain 0..4 lin 1
eqBand0 -12..12 dB 0
eqBand1 -12..12 dB 0
eqBand2 -12..12 dB 0
eqBand3 -12..12 dB 0
eqBand4 -12..12 dB 0
reverbBlend 0..1 0
reverbDecay 0..1 0.5
delayMix 0..1 0
delayTime 20..2000 ms 350
inputPad 0..1 bool 0

Drum (drum)

Sixteen one-shot pads on C2 to D#3, each with its own bit crusher and low-pass, into a shared filter and character stage. A pad plays to its end and ignores the note-off. Pure ASL, so no WASM. A new one arrives with the factory kit loaded.

  • Jacks: in none / out audio

No parameters.

Grain (grain)

Granular instrument kernel. Needs WASM. Files are not auto-loaded.

  • Jacks: in note, gate, velocity / out audio
  • Kernel: WASM. Cannot flatten to a crate.plugin graph.
Param Range Default
grainMix 0..1 0
grainSize 20..500 ms 120
grainDensity 2..80 Hz 18
grainPitch -24..24 st 0
inputGain 0..4 lin 1
outputGain 0..4 lin 1
loopLength 0.25..5 s 2
dryLevel 0..1 1

Synth (synth)

Subtractive synth kernel. Needs WASM.

  • Jacks: in note, gate, velocity / out audio
  • Kernel: WASM. Cannot flatten to a crate.plugin graph.
Param Range Default
oscAWaveform 0..7 index 2
oscBWaveform 0..7 index 0
oscBlend -1..1 0
ampAttack 0.001..5 s 0.01
ampDecay 0.001..5 s 0.3
ampSustain 0..1 0.7
ampRelease 0.001..10 s 0.5
filterCutoff 20..20000 Hz 2000
filterResonance 0..1 0
masterGain 0..2 lin 0.8
delayMix 0..1 0
reverbBlend 0..1 0

Space Reverb (spacereverb)

Costello room kernel. Needs WASM.

  • Jacks: in input(audio) / out audio
  • Kernel: WASM. Cannot flatten to a crate.plugin graph.
Param Range Default
reverbBlend 0..1 0.28
reverbDecay 0..1 0.5
reverbSize 0.5..2 1
reverbPreDelay 0..100 ms 0
reverbTone 0..1 0.7
reverbGate 0..1 bool 0

IR (ir)

Convolution cabinet or space. Needs an impulse file.

  • Jacks: in input(audio) / out audio
  • Kernel: WASM. Cannot flatten to a crate.plugin graph.
  • File: Impulse (.wav, .aiff, .flac, ...).
Param Range Default
mix 0..1 1
gain 0..4 1