From 1e3ba96beb64799635f485d65a291fd0545c11d3 Mon Sep 17 00:00:00 2001
From: Mark Thoren <mark.thoren@analog.com>
Date: Wed, 4 Dec 2024 17:30:21 -0800
Subject: [PATCH] Adjust RX LO frequency for better yield.
Signed-off-by: Mark Thoren <mark.thoren@analog.com>
---
examples/phaser/phaser_prod_tst.py | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/examples/phaser/phaser_prod_tst.py b/examples/phaser/phaser_prod_tst.py
index a199a26ae..c612ff36a 100644
--- a/examples/phaser/phaser_prod_tst.py
+++ b/examples/phaser/phaser_prod_tst.py
@@ -94,7 +94,7 @@
phase_cal_limits = [90.0, 90.0, 90.0, 120.0, 90.0, 90.0, 90.0]
# Set up RF / IF / LO frequencies
-rx_lo = 2.2e9
+rx_lo = 1.9e9
SignalFreq = 10.2e9
use_tx = True # Use on board TX w/ cabled antenna, NOT external HB100
@@ -232,7 +232,7 @@
-88
) # this is a negative number between 0 and -88
my_sdr.tx_hardwaregain_chan1 = int(-3)
- my_sdr.tx_lo = int(2.2e9)
+ my_sdr.tx_lo = int(rx_lo)
else:
# To disable rx, set attenuation to a high value and set frequency far from rx.
my_sdr.tx_hardwaregain_chan0 = int(