From bc5efee6cb52a0c47ff4dc9aaf42bb4e753fd8c2 Mon Sep 17 00:00:00 2001 From: Lewis He Date: Mon, 1 Jul 2024 16:55:42 +0800 Subject: [PATCH] Added LilyGo T3S3 variants (#9956) * Added LilyGo T3S3 variants * ci(pre-commit): Apply automatic fixes --------- Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com> --- boards.txt | 184 ++++++++++++++++++ variants/lilygo_t3_s3_lr1121/pins_arduino.h | 67 +++++++ variants/lilygo_t3_s3_sx1262/pins_arduino.h | 67 +++++++ variants/lilygo_t3_s3_sx127x/pins_arduino.h | 74 +++++++ variants/lilygo_t3_s3_sx1280/pins_arduino.h | 67 +++++++ variants/lilygo_t3_s3_sx1280pa/pins_arduino.h | 66 +++++++ 6 files changed, 525 insertions(+) create mode 100644 variants/lilygo_t3_s3_lr1121/pins_arduino.h create mode 100644 variants/lilygo_t3_s3_sx1262/pins_arduino.h create mode 100644 variants/lilygo_t3_s3_sx127x/pins_arduino.h create mode 100644 variants/lilygo_t3_s3_sx1280/pins_arduino.h create mode 100644 variants/lilygo_t3_s3_sx1280pa/pins_arduino.h diff --git a/boards.txt b/boards.txt index 96966b9bdac..fb112eefd86 100644 --- a/boards.txt +++ b/boards.txt @@ -4811,6 +4811,190 @@ lilygo_t_eth_lite.menu.EraseFlash.none.upload.erase_cmd= lilygo_t_eth_lite.menu.EraseFlash.all=Enabled lilygo_t_eth_lite.menu.EraseFlash.all.upload.erase_cmd=-e + +############################################################## + +lilygo_t3s3.name=LilyGo T3-S3 + +lilygo_t3s3.upload.tool=esptool_py +lilygo_t3s3.upload.tool.default=esptool_py +lilygo_t3s3.upload.tool.network=esp_ota +lilygo_t3s3.upload.maximum_size=1310720 +lilygo_t3s3.upload.maximum_data_size=327680 +lilygo_t3s3.upload.wait_for_upload_port=false +lilygo_t3s3.upload.speed=460800 +lilygo_t3s3.upload.flags= +lilygo_t3s3.upload.extra_flags= + +lilygo_t3s3.bootloader.tool=esptool_py +lilygo_t3s3.bootloader.tool.default=esptool_py + +lilygo_t3s3.serial.disableDTR=true +lilygo_t3s3.serial.disableRTS=true + +lilygo_t3s3.build.tarch=xtensa +lilygo_t3s3.build.bootloader_addr=0x0 +lilygo_t3s3.build.mcu=esp32s3 +lilygo_t3s3.build.core=esp32 +lilygo_t3s3.build.target=esp32s3 +lilygo_t3s3.build.board=LILYGO_T3_S3 + +lilygo_t3s3.build.usb_mode=1 +lilygo_t3s3.build.cdc_on_boot=1 +lilygo_t3s3.build.msc_on_boot=0 +lilygo_t3s3.build.dfu_on_boot=0 + +lilygo_t3s3.build.f_cpu=240000000L +lilygo_t3s3.build.flash_size=4MB +lilygo_t3s3.build.flash_freq=80m +lilygo_t3s3.build.flash_mode=dio +lilygo_t3s3.build.boot=dio +lilygo_t3s3.build.partitions=default +lilygo_t3s3.build.defines= + +lilygo_t3s3.menu.PSRAM.disabled=Disabled +lilygo_t3s3.menu.PSRAM.disabled.build.defines= +lilygo_t3s3.menu.PSRAM.enabled=Enabled +lilygo_t3s3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM +lilygo_t3s3.menu.PSRAM.enabled.build.psram_type=qspi + +lilygo_t3s3.menu.LoopCore.1=Core 1 +lilygo_t3s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1 +lilygo_t3s3.menu.LoopCore.0=Core 0 +lilygo_t3s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0 + +lilygo_t3s3.menu.EventsCore.1=Core 1 +lilygo_t3s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1 +lilygo_t3s3.menu.EventsCore.0=Core 0 +lilygo_t3s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0 + +lilygo_t3s3.menu.USBMode.hwcdc=Hardware CDC and JTAG +lilygo_t3s3.menu.USBMode.hwcdc.build.usb_mode=1 +lilygo_t3s3.menu.USBMode.default=USB-OTG (TinyUSB) +lilygo_t3s3.menu.USBMode.default.build.usb_mode=0 + +lilygo_t3s3.menu.CDCOnBoot.default=Disabled +lilygo_t3s3.menu.CDCOnBoot.default.build.cdc_on_boot=0 +lilygo_t3s3.menu.CDCOnBoot.cdc=Enabled +lilygo_t3s3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1 + +lilygo_t3s3.menu.MSCOnBoot.default=Disabled +lilygo_t3s3.menu.MSCOnBoot.default.build.msc_on_boot=0 +lilygo_t3s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode) +lilygo_t3s3.menu.MSCOnBoot.msc.build.msc_on_boot=1 + +lilygo_t3s3.menu.DFUOnBoot.default=Disabled +lilygo_t3s3.menu.DFUOnBoot.default.build.dfu_on_boot=0 +lilygo_t3s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode) +lilygo_t3s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1 + +lilygo_t3s3.menu.UploadMode.default=UART0 / Hardware CDC +lilygo_t3s3.menu.UploadMode.default.upload.use_1200bps_touch=false +lilygo_t3s3.menu.UploadMode.default.upload.wait_for_upload_port=false +lilygo_t3s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB) +lilygo_t3s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true +lilygo_t3s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true + +lilygo_t3s3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS) +lilygo_t3s3.menu.PartitionScheme.default.build.partitions=default +lilygo_t3s3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS) +lilygo_t3s3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat +lilygo_t3s3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS) +lilygo_t3s3.menu.PartitionScheme.minimal.build.partitions=minimal +lilygo_t3s3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS) +lilygo_t3s3.menu.PartitionScheme.no_ota.build.partitions=no_ota +lilygo_t3s3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152 +lilygo_t3s3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS) +lilygo_t3s3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g +lilygo_t3s3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576 +lilygo_t3s3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS) +lilygo_t3s3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat +lilygo_t3s3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152 +lilygo_t3s3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS) +lilygo_t3s3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat +lilygo_t3s3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576 +lilygo_t3s3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS) +lilygo_t3s3.menu.PartitionScheme.huge_app.build.partitions=huge_app +lilygo_t3s3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728 +lilygo_t3s3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS) +lilygo_t3s3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs +lilygo_t3s3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080 + +lilygo_t3s3.menu.CPUFreq.240=240MHz (WiFi/BT) +lilygo_t3s3.menu.CPUFreq.240.build.f_cpu=240000000L +lilygo_t3s3.menu.CPUFreq.160=160MHz (WiFi/BT) +lilygo_t3s3.menu.CPUFreq.160.build.f_cpu=160000000L +lilygo_t3s3.menu.CPUFreq.80=80MHz (WiFi/BT) +lilygo_t3s3.menu.CPUFreq.80.build.f_cpu=80000000L + +lilygo_t3s3.menu.FlashMode.qio=QIO +lilygo_t3s3.menu.FlashMode.qio.build.flash_mode=dio +lilygo_t3s3.menu.FlashMode.qio.build.boot=qio +lilygo_t3s3.menu.FlashMode.dio=DIO +lilygo_t3s3.menu.FlashMode.dio.build.flash_mode=dio +lilygo_t3s3.menu.FlashMode.dio.build.boot=dio + +lilygo_t3s3.menu.FlashFreq.80=80MHz +lilygo_t3s3.menu.FlashFreq.80.build.flash_freq=80m +lilygo_t3s3.menu.FlashFreq.40=40MHz +lilygo_t3s3.menu.FlashFreq.40.build.flash_freq=40m + +lilygo_t3s3.menu.UploadSpeed.921600=921600 +lilygo_t3s3.menu.UploadSpeed.921600.upload.speed=921600 +lilygo_t3s3.menu.UploadSpeed.115200=115200 +lilygo_t3s3.menu.UploadSpeed.115200.upload.speed=115200 +lilygo_t3s3.menu.UploadSpeed.256000.windows=256000 +lilygo_t3s3.menu.UploadSpeed.256000.upload.speed=256000 +lilygo_t3s3.menu.UploadSpeed.230400.windows.upload.speed=256000 +lilygo_t3s3.menu.UploadSpeed.230400=230400 +lilygo_t3s3.menu.UploadSpeed.230400.upload.speed=230400 +lilygo_t3s3.menu.UploadSpeed.460800.linux=460800 +lilygo_t3s3.menu.UploadSpeed.460800.macosx=460800 +lilygo_t3s3.menu.UploadSpeed.460800.upload.speed=460800 +lilygo_t3s3.menu.UploadSpeed.512000.windows=512000 +lilygo_t3s3.menu.UploadSpeed.512000.upload.speed=512000 + +lilygo_t3s3.menu.DebugLevel.none=None +lilygo_t3s3.menu.DebugLevel.none.build.code_debug=0 +lilygo_t3s3.menu.DebugLevel.error=Error +lilygo_t3s3.menu.DebugLevel.error.build.code_debug=1 +lilygo_t3s3.menu.DebugLevel.warn=Warn +lilygo_t3s3.menu.DebugLevel.warn.build.code_debug=2 +lilygo_t3s3.menu.DebugLevel.info=Info +lilygo_t3s3.menu.DebugLevel.info.build.code_debug=3 +lilygo_t3s3.menu.DebugLevel.debug=Debug +lilygo_t3s3.menu.DebugLevel.debug.build.code_debug=4 +lilygo_t3s3.menu.DebugLevel.verbose=Verbose +lilygo_t3s3.menu.DebugLevel.verbose.build.code_debug=5 + +lilygo_t3s3.menu.EraseFlash.none=Disabled +lilygo_t3s3.menu.EraseFlash.none.upload.erase_cmd= +lilygo_t3s3.menu.EraseFlash.all=Enabled +lilygo_t3s3.menu.EraseFlash.all.upload.erase_cmd=-e + +lilygo_t3s3.menu.Revision.Radio_SX1262=Radio-SX1262 +lilygo_t3s3.menu.Revision.Radio_SX1262.build.board=LILYGO_T3S3_SX1262 +lilygo_t3s3.menu.Revision.Radio_SX1262.build.variant=lilygo_t3_s3_sx1262 + +lilygo_t3s3.menu.Revision.Radio_SX1276=Radio-SX1276 +lilygo_t3s3.menu.Revision.Radio_SX1276.build.board=LILYGO_T3S3_SX1276 +lilygo_t3s3.menu.Revision.Radio_SX1276.build.variant=lilygo_t3_s3_sx127x + +lilygo_t3s3.menu.Revision.Radio_SX1278=Radio-SX1278 +lilygo_t3s3.menu.Revision.Radio_SX1278.build.board=LILYGO_T3S3_SX1278 +lilygo_t3s3.menu.Revision.Radio_SX1278.build.variant=lilygo_t3_s3_sx127x + +lilygo_t3s3.menu.Revision.Radio_SX1280=Radio-SX1280 +lilygo_t3s3.menu.Revision.Radio_SX1280.build.board=LILYGO_T3S3_SX1280 +lilygo_t3s3.menu.Revision.Radio_SX1280.build.variant=lilygo_t3_s3_sx1280 + +lilygo_t3s3.menu.Revision.Radio_SX1280PA=Radio-SX1280PA +lilygo_t3s3.menu.Revision.Radio_SX1280PA.build.board=LILYGO_T3S3_SX1280PA +lilygo_t3s3.menu.Revision.Radio_SX1280PA.build.variant=lilygo_t3_s3_sx1280pa + +lilygo_t3s3.menu.Revision.Radio_LR1121=Radio-LR1121 +lilygo_t3s3.menu.Revision.Radio_LR1121.build.board=LILYGO_T3S3_LR1121 +lilygo_t3s3.menu.Revision.Radio_LR1121.build.variant=lilygo_t3_s3_lr1121 ############################################################## micros2.name=microS2 diff --git a/variants/lilygo_t3_s3_lr1121/pins_arduino.h b/variants/lilygo_t3_s3_lr1121/pins_arduino.h new file mode 100644 index 00000000000..70fc3502dab --- /dev/null +++ b/variants/lilygo_t3_s3_lr1121/pins_arduino.h @@ -0,0 +1,67 @@ +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +#define USB_VID 0x303a +#define USB_PID 0x820A + +static const uint8_t LED_BUILTIN = 37; +#define BUILTIN_LED LED_BUILTIN // backward compatibility +#define LED_BUILTIN LED_BUILTIN // allow testing #ifdef LED_BUILTIN + +static const uint8_t BUTTON_1 = 0; +static const uint8_t BAT_VOLT = 1; + +static const uint8_t TX = 43; +static const uint8_t RX = 44; + +static const uint8_t SDA = 18; +static const uint8_t SCL = 17; + +#define WIRE1_PIN_DEFINED //QWIIC +static const uint8_t SDA1 = 10; +static const uint8_t SCL1 = 21; + +// SD Card SPI +static const uint8_t SS = 13; +static const uint8_t MOSI = 11; +static const uint8_t MISO = 2; +static const uint8_t SCK = 14; + +#define LORA_SCK 5 // LR1121 SCK +#define LORA_MISO 3 // LR1121 MISO +#define LORA_MOSI 6 // LR1121 MOSI +#define LORA_CS 7 // LR1121 CS +#define LORA_RST 8 // LR1121 RST + +#define LORA_DIO9 36 // LR1121 DIO9 +#define LORA_BUSY 34 // LR1121 BUSY +#define LORA_IRQ LORA_DIO9 + +// P1 +static const uint8_t PIN_42 = 45; +static const uint8_t PIN_46 = 46; +static const uint8_t PIN_45 = 45; +static const uint8_t PIN_41 = 41; +static const uint8_t PIN_40 = 40; +static const uint8_t PIN_39 = 39; +static const uint8_t PIN_43 = 43; +static const uint8_t PIN_44 = 44; +static const uint8_t PIN_38 = 38; + +// P2 +static const uint8_t PIN_37 = 37; +static const uint8_t PIN_36 = 36; +static const uint8_t PIN_0 = 0; +static const uint8_t PIN_35 = 35; +static const uint8_t PIN_34 = 34; +static const uint8_t PIN_33 = 33; +static const uint8_t PIN_47 = 47; +static const uint8_t PIN_48 = 48; +static const uint8_t PIN_12 = 12; +static const uint8_t PIN_8 = 8; +static const uint8_t PIN_15 = 15; +static const uint8_t PIN_16 = 16; + +#endif /* Pins_Arduino_h */ diff --git a/variants/lilygo_t3_s3_sx1262/pins_arduino.h b/variants/lilygo_t3_s3_sx1262/pins_arduino.h new file mode 100644 index 00000000000..8fbf0b31066 --- /dev/null +++ b/variants/lilygo_t3_s3_sx1262/pins_arduino.h @@ -0,0 +1,67 @@ +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +#define USB_VID 0x303a +#define USB_PID 0x820A + +static const uint8_t LED_BUILTIN = 37; +#define BUILTIN_LED LED_BUILTIN // backward compatibility +#define LED_BUILTIN LED_BUILTIN // allow testing #ifdef LED_BUILTIN + +static const uint8_t BUTTON_1 = 0; +static const uint8_t BAT_VOLT = 1; + +static const uint8_t TX = 43; +static const uint8_t RX = 44; + +static const uint8_t SDA = 18; +static const uint8_t SCL = 17; + +#define WIRE1_PIN_DEFINED //QWIIC +static const uint8_t SDA1 = 10; +static const uint8_t SCL1 = 21; + +// SD Card SPI +static const uint8_t SS = 13; +static const uint8_t MOSI = 11; +static const uint8_t MISO = 2; +static const uint8_t SCK = 14; + +#define LORA_SCK 5 // SX1262 SCK +#define LORA_MISO 3 // SX1262 MISO +#define LORA_MOSI 6 // SX1262 MOSI +#define LORA_CS 7 // SX1262 CS +#define LORA_RST 8 // SX1262 RST + +#define LORA_DIO1 33 //SX1262 DIO1 +#define LORA_BUSY 34 +#define LORA_IRQ LORA_DIO1 + +// P1 +static const uint8_t PIN_42 = 45; +static const uint8_t PIN_46 = 46; +static const uint8_t PIN_45 = 45; +static const uint8_t PIN_41 = 41; +static const uint8_t PIN_40 = 40; +static const uint8_t PIN_39 = 39; +static const uint8_t PIN_43 = 43; +static const uint8_t PIN_44 = 44; +static const uint8_t PIN_38 = 38; + +// P2 +static const uint8_t PIN_37 = 37; +static const uint8_t PIN_36 = 36; +static const uint8_t PIN_0 = 0; +static const uint8_t PIN_35 = 35; +static const uint8_t PIN_34 = 34; +static const uint8_t PIN_33 = 33; +static const uint8_t PIN_47 = 47; +static const uint8_t PIN_48 = 48; +static const uint8_t PIN_12 = 12; +static const uint8_t PIN_8 = 8; +static const uint8_t PIN_15 = 15; +static const uint8_t PIN_16 = 16; + +#endif /* Pins_Arduino_h */ diff --git a/variants/lilygo_t3_s3_sx127x/pins_arduino.h b/variants/lilygo_t3_s3_sx127x/pins_arduino.h new file mode 100644 index 00000000000..1b3e0a99239 --- /dev/null +++ b/variants/lilygo_t3_s3_sx127x/pins_arduino.h @@ -0,0 +1,74 @@ +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +#define USB_VID 0x303a +#define USB_PID 0x820A + +static const uint8_t LED_BUILTIN = 37; +#define BUILTIN_LED LED_BUILTIN // backward compatibility +#define LED_BUILTIN LED_BUILTIN // allow testing #ifdef LED_BUILTIN + +static const uint8_t BUTTON_1 = 0; +static const uint8_t BAT_VOLT = 1; + +static const uint8_t TX = 43; +static const uint8_t RX = 44; + +static const uint8_t SDA = 18; +static const uint8_t SCL = 17; + +#define WIRE1_PIN_DEFINED //QWIIC +static const uint8_t SDA1 = 10; +static const uint8_t SCL1 = 21; + +// SD Card SPI +static const uint8_t SS = 13; +static const uint8_t MOSI = 11; +static const uint8_t MISO = 2; +static const uint8_t SCK = 14; + +#define LORA_SCK 5 // SX1276/SX1278 SCK +#define LORA_MISO 3 // SX1276/SX1278 MISO +#define LORA_MOSI 6 // SX1276/SX1278 MOSI +#define LORA_CS 7 // SX1276/SX1278 CS +#define LORA_RST 8 // SX1276/SX1278 RST + +#define LORA_BUSY 33 +#define LORA_DIO0 9 //IRQ +#define LORA_DIO1 33 +#define LORA_DIO2 34 +#define LORA_DIO3 21 +#define LORA_DIO4 10 +#define LORA_DIO5 36 + +#define LORA_IRQ LORA_DIO0 +#define LORA_BUSY LORA_DIO1 + +// P1 +static const uint8_t PIN_42 = 45; +static const uint8_t PIN_46 = 46; +static const uint8_t PIN_45 = 45; +static const uint8_t PIN_41 = 41; +static const uint8_t PIN_40 = 40; +static const uint8_t PIN_39 = 39; +static const uint8_t PIN_43 = 43; +static const uint8_t PIN_44 = 44; +static const uint8_t PIN_38 = 38; + +// P2 +static const uint8_t PIN_37 = 37; +static const uint8_t PIN_36 = 36; +static const uint8_t PIN_0 = 0; +static const uint8_t PIN_35 = 35; +static const uint8_t PIN_34 = 34; +static const uint8_t PIN_33 = 33; +static const uint8_t PIN_47 = 47; +static const uint8_t PIN_48 = 48; +static const uint8_t PIN_12 = 12; +static const uint8_t PIN_8 = 8; +static const uint8_t PIN_15 = 15; +static const uint8_t PIN_16 = 16; + +#endif /* Pins_Arduino_h */ diff --git a/variants/lilygo_t3_s3_sx1280/pins_arduino.h b/variants/lilygo_t3_s3_sx1280/pins_arduino.h new file mode 100644 index 00000000000..ba342f3b8e9 --- /dev/null +++ b/variants/lilygo_t3_s3_sx1280/pins_arduino.h @@ -0,0 +1,67 @@ +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +#define USB_VID 0x303a +#define USB_PID 0x820A + +static const uint8_t LED_BUILTIN = 37; +#define BUILTIN_LED LED_BUILTIN // backward compatibility +#define LED_BUILTIN LED_BUILTIN // allow testing #ifdef LED_BUILTIN + +static const uint8_t BUTTON_1 = 0; +static const uint8_t BAT_VOLT = 1; + +static const uint8_t TX = 43; +static const uint8_t RX = 44; + +static const uint8_t SDA = 18; +static const uint8_t SCL = 17; + +#define WIRE1_PIN_DEFINED //QWIIC +static const uint8_t SDA1 = 10; +static const uint8_t SCL1 = 21; + +// SD Card SPI +static const uint8_t SS = 13; +static const uint8_t MOSI = 11; +static const uint8_t MISO = 2; +static const uint8_t SCK = 14; + +#define LORA_SCK 5 // SX1280 SCK +#define LORA_MISO 3 // SX1280 MISO +#define LORA_MOSI 6 // SX1280 MOSI +#define LORA_CS 7 // SX1280 CS +#define LORA_RST 8 // SX1280 RST + +#define LORA_DIO1 9 // SX1280 DIO1 +#define LORA_BUSY 36 // SX1280 BUSY +#define LORA_IRQ LORA_DIO1 + +// P1 +static const uint8_t PIN_42 = 45; +static const uint8_t PIN_46 = 46; +static const uint8_t PIN_45 = 45; +static const uint8_t PIN_41 = 41; +static const uint8_t PIN_40 = 40; +static const uint8_t PIN_39 = 39; +static const uint8_t PIN_43 = 43; +static const uint8_t PIN_44 = 44; +static const uint8_t PIN_38 = 38; + +// P2 +static const uint8_t PIN_37 = 37; +static const uint8_t PIN_36 = 36; +static const uint8_t PIN_0 = 0; +static const uint8_t PIN_35 = 35; +static const uint8_t PIN_34 = 34; +static const uint8_t PIN_33 = 33; +static const uint8_t PIN_47 = 47; +static const uint8_t PIN_48 = 48; +static const uint8_t PIN_12 = 12; +static const uint8_t PIN_8 = 8; +static const uint8_t PIN_15 = 15; +static const uint8_t PIN_16 = 16; + +#endif /* Pins_Arduino_h */ diff --git a/variants/lilygo_t3_s3_sx1280pa/pins_arduino.h b/variants/lilygo_t3_s3_sx1280pa/pins_arduino.h new file mode 100644 index 00000000000..03212754a69 --- /dev/null +++ b/variants/lilygo_t3_s3_sx1280pa/pins_arduino.h @@ -0,0 +1,66 @@ +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +#define USB_VID 0x303a +#define USB_PID 0x820A + +static const uint8_t LED_BUILTIN = 37; +#define BUILTIN_LED LED_BUILTIN // backward compatibility +#define LED_BUILTIN LED_BUILTIN // allow testing #ifdef LED_BUILTIN + +static const uint8_t BUTTON_1 = 0; +static const uint8_t BAT_VOLT = 1; + +static const uint8_t TX = 43; +static const uint8_t RX = 44; + +static const uint8_t SDA = 18; +static const uint8_t SCL = 17; + +// SD Card SPI +static const uint8_t SS = 13; +static const uint8_t MOSI = 11; +static const uint8_t MISO = 2; +static const uint8_t SCK = 14; + +#define LORA_SCK 5 // SX1280PA SCK +#define LORA_MISO 3 // SX1280PA MISO +#define LORA_MOSI 6 // SX1280PA MOSI +#define LORA_CS 7 // SX1280PA CS +#define LORA_RST 8 // SX1280PA RST + +#define LORA_DIO1 9 // SX1280 DIO1 +#define LORA_BUSY 36 // SX1280 BUSY +#define LORA_IRQ LORA_DIO1 + +#define LORA_RX 21 // SX1280PA RX SWITCH +#define LORA_TX 10 // SX1280PA TX SWITCH + +// P1 +static const uint8_t PIN_42 = 45; +static const uint8_t PIN_46 = 46; +static const uint8_t PIN_45 = 45; +static const uint8_t PIN_41 = 41; +static const uint8_t PIN_40 = 40; +static const uint8_t PIN_39 = 39; +static const uint8_t PIN_43 = 43; +static const uint8_t PIN_44 = 44; +static const uint8_t PIN_38 = 38; + +// P2 +static const uint8_t PIN_37 = 37; +static const uint8_t PIN_36 = 36; +static const uint8_t PIN_0 = 0; +static const uint8_t PIN_35 = 35; +static const uint8_t PIN_34 = 34; +static const uint8_t PIN_33 = 33; +static const uint8_t PIN_47 = 47; +static const uint8_t PIN_48 = 48; +static const uint8_t PIN_12 = 12; +static const uint8_t PIN_8 = 8; +static const uint8_t PIN_15 = 15; +static const uint8_t PIN_16 = 16; + +#endif /* Pins_Arduino_h */