V0 C920 Tophat Mount (VoronDesign#267)

* Update Koios's mods to be current

Add new glass rest.  These all work on 2.4, tested on my printer.

* Fix readme/glassrest

Correct the glass rest to use fillet & readme

* Fix legacy printers warning

* Initial commit V0 C920 Mount

* Update README.md

* Repair Corner cable clip STL

* Updated compatibility note

* Fit voronusers repo rules, plus some grammar

Author: Justin Hunt

printer_mods/Koios/README.MD

@@ -8,4 +8,7 @@ Mount a C920 at the top front of your printer, for maximum field of view and min
 
 # Glass mount
 
-Using the 2.1 panel sizes, I mounted 6mm thick tempered glass panels on my voron.  These files allow the locking latches to secure the panels to the front & sides of the printer. This works fine with 2.4.
+Using the 2.1 panel sizes, I mounted 6mm thick tempered glass panels on my voron.  These files allow the locking latches to secure the panels to the front & sides of the printer. This works fine with 2.4.
+
+# V0 C920 Mount
+Similar to the above C920 mount, but re-engineered to fit nicely on the V0 tophat, including cable management clips.

printer_mods/Koios/V0_C920_Tophat_Mount/Images/Cable_Routing.jpg

@@ -0,0 +1,12 @@
+# V0 C920 Mount
+
+This is a low profile mount to hold a Logitech C920 series camera at the top front of the tophat, sharing the existing screw mount for the panel clips.  I've also included some cable tie brackets to facilitate cable management for the usb cable. The mid-span clips are somewhat fragile, but if you use care they work well, as they aren't under any stress. 
+
+You will need to disassemble the C920, you can follow this [video guide](https://www.youtube.com/watch?v=94lDYZgihT4).  Disassemble until you can get the two metal swivel joints undone, slide into the two holes on the mount, then reassemble.
+
+This is how the finished project looks:
+![Cable Route](./Images/Cable_Routing.jpg)
+![From Above](./Images/From_Above.jpg)
+![Front view of the mount](./Images/Mount.jpg)
+
+Note: this will not work with the sherpa & extended top hat per goopyplastic V0.263

printer_mods/Koios/V0_C920_Tophat_Mount/Images/From_Above.jpg

@@ -98,6 +98,7 @@ like so:
 | Koios | [6mm Tempered Glass Mod](./Koios/6mm_Glass) | Lock levers and rests for 6mm Tempered glass panels | :x: | :x:| :heavy_check_mark: | :x: |
 | | [C920 Low Profile Mount](./Koios/C920_Mount) | Low profile mount for a C920 Webcam | :x: | :x: | :heavy_check_mark: | :x: |
 | | [LED Bar Mounts](./Koios/LED_Mounts) | Low profile mount for led bar lights | :x: | :x: | :heavy_check_mark: | :x: |
+| | [V0 C920 Tophat Mount](./Koios/V0_C920_Tophat_Mount) | Mounting bracket for a Logitech C920 on the tophat  | :heavy_check_mark: | :x: | :x: | :x: |
 | Kruppes |[Belt Tension Meter](./Kruppes/Tension_Meter) | Print in place tension meter to easily tighten multiple belts to the same tension |:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark:|
 | |[Encosed Bottom](./Kruppes/Closed_Bottom) | Modified printed parts and panel to fully enclose V0. |:heavy_check_mark: |:x: |:x: |:x:|
 | |[V0 Printed Deck with inserts](./Kruppes/Deck_Panel_inserts_logo) |Electronics Deck Panel using brass heat inserts. Optional with accent color Voron Logo. |:heavy_check_mark: |:x: |:x: |:x:|