[Network Connection Issue]:

[0xAJPanda]

Binary Version

0.0.5-4-g88a5ae2

app.toml Configuration

# This is a TOML config file.
# For more information, see https://github.com/toml-lang/toml

###############################################################################
###                           Base Configuration                            ###
###############################################################################

# The minimum gas prices a validator is willing to accept for processing a
# transaction. A transaction's fees must meet the minimum of any denomination
# specified in this config (e.g. 0.25token1,0.0001token2).
minimum-gas-prices = "0utac"

# The maximum gas a query coming over rest/grpc may consume.
# If this is set to zero, the query can consume an unbounded amount of gas.
query-gas-limit = "0"

# default: the last 362880 states are kept, pruning at 10 block intervals
# nothing: all historic states will be saved, nothing will be deleted (i.e. archiving node)
# everything: 2 latest states will be kept; pruning at 10 block intervals.
# custom: allow pruning options to be manually specified through 'pruning-keep-recent', and 'pruning-interval'
pruning = "default"

# These are applied if and only if the pruning strategy is custom.
pruning-keep-recent = "0"
pruning-interval = "0"

# HaltHeight contains a non-zero block height at which a node will gracefully
# halt and shutdown that can be used to assist upgrades and testing.
#
# Note: Commitment of state will be attempted on the corresponding block.
halt-height = 0

# HaltTime contains a non-zero minimum block time (in Unix seconds) at which
# a node will gracefully halt and shutdown that can be used to assist upgrades
# and testing.
#
# Note: Commitment of state will be attempted on the corresponding block.
halt-time = 0

# MinRetainBlocks defines the minimum block height offset from the current
# block being committed, such that all blocks past this offset are pruned
# from CometBFT. It is used as part of the process of determining the
# ResponseCommit.RetainHeight value during ABCI Commit. A value of 0 indicates
# that no blocks should be pruned.
#
# This configuration value is only responsible for pruning CometBFT blocks.
# It has no bearing on application state pruning which is determined by the
# "pruning-*" configurations.
#
# Note: CometBFT block pruning is dependant on this parameter in conjunction
# with the unbonding (safety threshold) period, state pruning and state sync
# snapshot parameters to determine the correct minimum value of
# ResponseCommit.RetainHeight.
min-retain-blocks = 0

# InterBlockCache enables inter-block caching.
inter-block-cache = true

# IndexEvents defines the set of events in the form {eventType}.{attributeKey},
# which informs CometBFT what to index. If empty, all events will be indexed.
#
# Example:
# ["message.sender", "message.recipient"]
index-events = []

# IavlCacheSize set the size of the iavl tree cache (in number of nodes).
iavl-cache-size = 781250

# IAVLDisableFastNode enables or disables the fast node feature of IAVL. 
# Default is false.
iavl-disable-fastnode = false

# AppDBBackend defines the database backend type to use for the application and snapshots DBs.
# An empty string indicates that a fallback will be used.
# The fallback is the db_backend value set in CometBFT's config.toml.
app-db-backend = ""

###############################################################################
###                         Telemetry Configuration                         ###
###############################################################################

[telemetry]

# Prefixed with keys to separate services.
service-name = ""

# Enabled enables the application telemetry functionality. When enabled,
# an in-memory sink is also enabled by default. Operators may also enabled
# other sinks such as Prometheus.
enabled = false

# Enable prefixing gauge values with hostname.
enable-hostname = false

# Enable adding hostname to labels.
enable-hostname-label = false

# Enable adding service to labels.
enable-service-label = false

# PrometheusRetentionTime, when positive, enables a Prometheus metrics sink.
prometheus-retention-time = 0

# GlobalLabels defines a global set of name/value label tuples applied to all
# metrics emitted using the wrapper functions defined in telemetry package.
#
# Example:
# [["chain_id", "cosmoshub-1"]]
global-labels = [
]

# MetricsSink defines the type of metrics sink to use.
metrics-sink = ""

# StatsdAddr defines the address of a statsd server to send metrics to.
# Only utilized if MetricsSink is set to "statsd" or "dogstatsd".
statsd-addr = ""

# DatadogHostname defines the hostname to use when emitting metrics to
# Datadog. Only utilized if MetricsSink is set to "dogstatsd".
datadog-hostname = ""

###############################################################################
###                           API Configuration                             ###
###############################################################################

[api]

# Enable defines if the API server should be enabled.
enable = false

# Swagger defines if swagger documentation should automatically be registered.
swagger = false

# Address defines the API server to listen on.
address = "tcp://localhost:1317"

# MaxOpenConnections defines the number of maximum open connections.
max-open-connections = 1000

# RPCReadTimeout defines the CometBFT RPC read timeout (in seconds).
rpc-read-timeout = 10

# RPCWriteTimeout defines the CometBFT RPC write timeout (in seconds).
rpc-write-timeout = 0

# RPCMaxBodyBytes defines the CometBFT maximum request body (in bytes).
rpc-max-body-bytes = 1000000

# EnableUnsafeCORS defines if CORS should be enabled (unsafe - use it at your own risk).
enabled-unsafe-cors = false

###############################################################################
###                           gRPC Configuration                            ###
###############################################################################

[grpc]

# Enable defines if the gRPC server should be enabled.
enable = true

# Address defines the gRPC server address to bind to.
address = "localhost:39090"

# MaxRecvMsgSize defines the max message size in bytes the server can receive.
# The default value is 10MB.
max-recv-msg-size = "10485760"

# MaxSendMsgSize defines the max message size in bytes the server can send.
# The default value is math.MaxInt32.
max-send-msg-size = "2147483647"

###############################################################################
###                        gRPC Web Configuration                           ###
###############################################################################

[grpc-web]

# GRPCWebEnable defines if the gRPC-web should be enabled.
# NOTE: gRPC must also be enabled, otherwise, this configuration is a no-op.
# NOTE: gRPC-Web uses the same address as the API server.
enable = true

###############################################################################
###                        State Sync Configuration                         ###
###############################################################################

# State sync snapshots allow other nodes to rapidly join the network without replaying historical
# blocks, instead downloading and applying a snapshot of the application state at a given height.
[state-sync]

# snapshot-interval specifies the block interval at which local state sync snapshots are
# taken (0 to disable).
snapshot-interval = 0

# snapshot-keep-recent specifies the number of recent snapshots to keep and serve (0 to keep all).
snapshot-keep-recent = 2

###############################################################################
###                              State Streaming                            ###
###############################################################################

# Streaming allows nodes to stream state to external systems.
[streaming]

# streaming.abci specifies the configuration for the ABCI Listener streaming service.
[streaming.abci]

# List of kv store keys to stream out via gRPC.
# The store key names MUST match the module's StoreKey name.
#
# Example:
# ["acc", "bank", "gov", "staking", "mint"[,...]]
# ["*"] to expose all keys.
keys = []

# The plugin name used for streaming via gRPC.
# Streaming is only enabled if this is set.
# Supported plugins: abci
plugin = ""

# stop-node-on-err specifies whether to stop the node on message delivery error.
stop-node-on-err = true

###############################################################################
###                         Mempool                                         ###
###############################################################################

[mempool]
# Setting max-txs to 0 will allow for a unbounded amount of transactions in the mempool.
# Setting max_txs to negative 1 (-1) will disable transactions from being inserted into the mempool (no-op mempool).
# Setting max_txs to a positive number (> 0) will limit the number of transactions in the mempool, by the specified amount.
#
# Note, this configuration only applies to SDK built-in app-side mempool
# implementations.
max-txs = -1

[wasm]
# Smart query gas limit is the max gas to be used in a smart query contract call
query_gas_limit = 3000000

# in-memory cache for Wasm contracts. Set to 0 to disable.
# The value is in MiB not bytes
memory_cache_size = 100

# Simulation gas limit is the max gas to be used in a tx simulation call.
# When not set the consensus max block gas is used instead
# simulation_gas_limit =

###############################################################################
###                             EVM Configuration                           ###
###############################################################################

[evm]

# Tracer defines the 'vm.Tracer' type that the EVM will use when the node is run in
# debug mode. To enable tracing use the '--evm.tracer' flag when starting your node.
# Valid types are: json|struct|access_list|markdown
tracer = ""

# MaxTxGasWanted defines the gas wanted for each eth tx returned in ante handler in check tx mode.
max-tx-gas-wanted = 0

###############################################################################
###                           JSON RPC Configuration                        ###
###############################################################################

[json-rpc]

# Enable defines if the gRPC server should be enabled.
enable = true

# Address defines the EVM RPC HTTP server address to bind to.
address = "127.0.0.1:38545"

# Address defines the EVM WebSocket server address to bind to.
ws-address = "127.0.0.1:38546"

# API defines a list of JSON-RPC namespaces that should be enabled
# Example: "eth,txpool,personal,net,debug,web3"
api = "eth,net,web3"

# GasCap sets a cap on gas that can be used in eth_call/estimateGas (0=infinite). Default: 25,000,000.
gas-cap = 25000000

# EVMTimeout is the global timeout for eth_call. Default: 5s.
evm-timeout = "5s"

# TxFeeCap is the global tx-fee cap for send transaction. Default: 1eth.
txfee-cap = 1

# FilterCap sets the global cap for total number of filters that can be created
filter-cap = 200

# FeeHistoryCap sets the global cap for total number of blocks that can be fetched
feehistory-cap = 100

# LogsCap defines the max number of results can be returned from single 'eth_getLogs' query.
logs-cap = 10000

# BlockRangeCap defines the max block range allowed for 'eth_getLogs' query.
block-range-cap = 10000

# HTTPTimeout is the read/write timeout of http json-rpc server.
http-timeout = "30s"

# HTTPIdleTimeout is the idle timeout of http json-rpc server.
http-idle-timeout = "2m0s"

# AllowUnprotectedTxs restricts unprotected (non EIP155 signed) transactions to be submitted via
# the node's RPC when the global parameter is disabled.
allow-unprotected-txs = false

# MaxOpenConnections sets the maximum number of simultaneous connections
# for the server listener.
max-open-connections = 0

# EnableIndexer enables the custom transaction indexer for the EVM (ethereum transactions).
enable-indexer = false

# MetricsAddress defines the EVM Metrics server address to bind to. Pass --metrics in CLI to enable
# Prometheus metrics path: /debug/metrics/prometheus
metrics-address = "127.0.0.1:36065"

# Upgrade height for fix of revert gas refund logic when transaction reverted.
fix-revert-gas-refund-height = 0

###############################################################################
###                             TLS Configuration                           ###
###############################################################################

[tls]

# Certificate path defines the cert.pem file path for the TLS configuration.
certificate-path = ""

# Key path defines the key.pem file path for the TLS configuration.
key-path = ""

config.toml Configuration

# This is a TOML config file.
# For more information, see https://github.com/toml-lang/toml

# NOTE: Any path below can be absolute (e.g. "/var/myawesomeapp/data") or
# relative to the home directory (e.g. "data"). The home directory is
# "$HOME/.cometbft" by default, but could be changed via $CMTHOME env variable
# or --home cmd flag.

# The version of the CometBFT binary that created or
# last modified the config file. Do not modify this.
version = "0.38.12"

#######################################################################
###                   Main Base Config Options                      ###
#######################################################################

# TCP or UNIX socket address of the ABCI application,
# or the name of an ABCI application compiled in with the CometBFT binary
proxy_app = "tcp://127.0.0.1:36658"

# A custom human readable name for this node
moniker = "AJPanda"

# Database backend: goleveldb | cleveldb | boltdb | rocksdb | badgerdb
# * goleveldb (github.com/syndtr/goleveldb - most popular implementation)
#   - pure go
#   - stable
# * cleveldb (uses levigo wrapper)
#   - fast
#   - requires gcc
#   - use cleveldb build tag (go build -tags cleveldb)
# * boltdb (uses etcd's fork of bolt - github.com/etcd-io/bbolt)
#   - EXPERIMENTAL
#   - may be faster is some use-cases (random reads - indexer)
#   - use boltdb build tag (go build -tags boltdb)
# * rocksdb (uses github.com/tecbot/gorocksdb)
#   - EXPERIMENTAL
#   - requires gcc
#   - use rocksdb build tag (go build -tags rocksdb)
# * badgerdb (uses github.com/dgraph-io/badger)
#   - EXPERIMENTAL
#   - use badgerdb build tag (go build -tags badgerdb)
db_backend = "goleveldb"

# Database directory
db_dir = "data"

# Output level for logging, including package level options
log_level = "info"

# Output format: 'plain' (colored text) or 'json'
log_format = "plain"

##### additional base config options #####

# Path to the JSON file containing the initial validator set and other meta data
genesis_file = "config/genesis.json"

# Path to the JSON file containing the private key to use as a validator in the consensus protocol
priv_validator_key_file = "config/priv_validator_key.json"

# Path to the JSON file containing the last sign state of a validator
priv_validator_state_file = "data/priv_validator_state.json"

# TCP or UNIX socket address for CometBFT to listen on for
# connections from an external PrivValidator process
priv_validator_laddr = ""

# Path to the JSON file containing the private key to use for node authentication in the p2p protocol
node_key_file = "config/node_key.json"

# Mechanism to connect to the ABCI application: socket | grpc
abci = "socket"

# If true, query the ABCI app on connecting to a new peer
# so the app can decide if we should keep the connection or not
filter_peers = false


#######################################################################
###                 Advanced Configuration Options                  ###
#######################################################################

#######################################################
###       RPC Server Configuration Options          ###
#######################################################
[rpc]

# TCP or UNIX socket address for the RPC server to listen on
laddr = "tcp://127.0.0.1:36657"

# A list of origins a cross-domain request can be executed from
# Default value '[]' disables cors support
# Use '["*"]' to allow any origin
cors_allowed_origins = []

# A list of methods the client is allowed to use with cross-domain requests
cors_allowed_methods = ["HEAD", "GET", "POST", ]

# A list of non simple headers the client is allowed to use with cross-domain requests
cors_allowed_headers = ["Origin", "Accept", "Content-Type", "X-Requested-With", "X-Server-Time", ]

# TCP or UNIX socket address for the gRPC server to listen on
# NOTE: This server only supports /broadcast_tx_commit
grpc_laddr = ""

# Maximum number of simultaneous connections.
# Does not include RPC (HTTP&WebSocket) connections. See max_open_connections
# If you want to accept a larger number than the default, make sure
# you increase your OS limits.
# 0 - unlimited.
# Should be < {ulimit -Sn} - {MaxNumInboundPeers} - {MaxNumOutboundPeers} - {N of wal, db and other open files}
# 1024 - 40 - 10 - 50 = 924 = ~900
grpc_max_open_connections = 900

# Activate unsafe RPC commands like /dial_seeds and /unsafe_flush_mempool
unsafe = false

# Maximum number of simultaneous connections (including WebSocket).
# Does not include gRPC connections. See grpc_max_open_connections
# If you want to accept a larger number than the default, make sure
# you increase your OS limits.
# 0 - unlimited.
# Should be < {ulimit -Sn} - {MaxNumInboundPeers} - {MaxNumOutboundPeers} - {N of wal, db and other open files}
# 1024 - 40 - 10 - 50 = 924 = ~900
max_open_connections = 900

# Maximum number of unique clientIDs that can /subscribe
# If you're using /broadcast_tx_commit, set to the estimated maximum number
# of broadcast_tx_commit calls per block.
max_subscription_clients = 100

# Maximum number of unique queries a given client can /subscribe to
# If you're using GRPC (or Local RPC client) and /broadcast_tx_commit, set to
# the estimated # maximum number of broadcast_tx_commit calls per block.
max_subscriptions_per_client = 5

# Experimental parameter to specify the maximum number of events a node will
# buffer, per subscription, before returning an error and closing the
# subscription. Must be set to at least 100, but higher values will accommodate
# higher event throughput rates (and will use more memory).
experimental_subscription_buffer_size = 200

# Experimental parameter to specify the maximum number of RPC responses that
# can be buffered per WebSocket client. If clients cannot read from the
# WebSocket endpoint fast enough, they will be disconnected, so increasing this
# parameter may reduce the chances of them being disconnected (but will cause
# the node to use more memory).
#
# Must be at least the same as "experimental_subscription_buffer_size",
# otherwise connections could be dropped unnecessarily. This value should
# ideally be somewhat higher than "experimental_subscription_buffer_size" to
# accommodate non-subscription-related RPC responses.
experimental_websocket_write_buffer_size = 200

# If a WebSocket client cannot read fast enough, at present we may
# silently drop events instead of generating an error or disconnecting the
# client.
#
# Enabling this experimental parameter will cause the WebSocket connection to
# be closed instead if it cannot read fast enough, allowing for greater
# predictability in subscription behavior.
experimental_close_on_slow_client = false

# How long to wait for a tx to be committed during /broadcast_tx_commit.
# WARNING: Using a value larger than 10s will result in increasing the
# global HTTP write timeout, which applies to all connections and endpoints.
# See https://github.com/tendermint/tendermint/issues/3435
timeout_broadcast_tx_commit = "10s"

# Maximum number of requests that can be sent in a batch
# If the value is set to '0' (zero-value), then no maximum batch size will be
# enforced for a JSON-RPC batch request.
max_request_batch_size = 10

# Maximum size of request body, in bytes
max_body_bytes = 1000000

# Maximum size of request header, in bytes
max_header_bytes = 1048576

# The path to a file containing certificate that is used to create the HTTPS server.
# Might be either absolute path or path related to CometBFT's config directory.
# If the certificate is signed by a certificate authority,
# the certFile should be the concatenation of the server's certificate, any intermediates,
# and the CA's certificate.
# NOTE: both tls_cert_file and tls_key_file must be present for CometBFT to create HTTPS server.
# Otherwise, HTTP server is run.
tls_cert_file = ""

# The path to a file containing matching private key that is used to create the HTTPS server.
# Might be either absolute path or path related to CometBFT's config directory.
# NOTE: both tls-cert-file and tls-key-file must be present for CometBFT to create HTTPS server.
# Otherwise, HTTP server is run.
tls_key_file = ""

# pprof listen address (https://golang.org/pkg/net/http/pprof)
pprof_laddr = "localhost:36060"

#######################################################
###           P2P Configuration Options             ###
#######################################################
[p2p]

# Address to listen for incoming connections
laddr = "tcp://0.0.0.0:36656"

# Address to advertise to peers for them to dial. If empty, will use the same
# port as the laddr, and will introspect on the listener to figure out the
# address. IP and port are required. Example: 159.89.10.97:26656
external_address = ""

# Comma separated list of seed nodes to connect to
seeds = ""

# Comma separated list of nodes to keep persistent connections to
#persistent_peers = ""
persistent_peers = "[email protected]:45120,[email protected]:45120,[email protected]:45110,[email protected]:45110"
# Path to address book
addr_book_file = "config/addrbook.json"

# Set true for strict address routability rules
# Set false for private or local networks
addr_book_strict = true

# Maximum number of inbound peers
max_num_inbound_peers = 40

# Maximum number of outbound peers to connect to, excluding persistent peers
max_num_outbound_peers = 10

# List of node IDs, to which a connection will be (re)established ignoring any existing limits
unconditional_peer_ids = ""

# Maximum pause when redialing a persistent peer (if zero, exponential backoff is used)
persistent_peers_max_dial_period = "0s"

# Time to wait before flushing messages out on the connection
flush_throttle_timeout = "100ms"

# Maximum size of a message packet payload, in bytes
max_packet_msg_payload_size = 1024

# Rate at which packets can be sent, in bytes/second
send_rate = 5120000

# Rate at which packets can be received, in bytes/second
recv_rate = 5120000

# Set true to enable the peer-exchange reactor
pex = true

# Seed mode, in which node constantly crawls the network and looks for
# peers. If another node asks it for addresses, it responds and disconnects.
#
# Does not work if the peer-exchange reactor is disabled.
seed_mode = false

# Comma separated list of peer IDs to keep private (will not be gossiped to other peers)
private_peer_ids = ""

# Toggle to disable guard against peers connecting from the same ip.
allow_duplicate_ip = false

# Peer connection configuration.
handshake_timeout = "20s"
dial_timeout = "3s"

#######################################################
###          Mempool Configuration Option          ###
#######################################################
[mempool]

# The type of mempool for this node to use.
#
#  Possible types:
#  - "flood" : concurrent linked list mempool with flooding gossip protocol
#  (default)
#  - "nop"   : nop-mempool (short for no operation; the ABCI app is responsible
#  for storing, disseminating and proposing txs). "create_empty_blocks=false" is
#  not supported.
type = "flood"

# Recheck (default: true) defines whether CometBFT should recheck the
# validity for all remaining transaction in the mempool after a block.
# Since a block affects the application state, some transactions in the
# mempool may become invalid. If this does not apply to your application,
# you can disable rechecking.
recheck = true

# recheck_timeout is the time the application has during the rechecking process
# to return CheckTx responses, once all requests have been sent. Responses that 
# arrive after the timeout expires are discarded. It only applies to 
# non-local ABCI clients and when recheck is enabled.
#
# The ideal value will strongly depend on the application. It could roughly be estimated as the
# average size of the mempool multiplied by the average time it takes the application to validate one
# transaction. We consider that the ABCI application runs in the same location as the CometBFT binary
# so that the recheck duration is not affected by network delays when making requests and receiving responses.
recheck_timeout = "1s"

# Broadcast (default: true) defines whether the mempool should relay
# transactions to other peers. Setting this to false will stop the mempool
# from relaying transactions to other peers until they are included in a
# block. In other words, if Broadcast is disabled, only the peer you send
# the tx to will see it until it is included in a block.
broadcast = true

# WalPath (default: "") configures the location of the Write Ahead Log
# (WAL) for the mempool. The WAL is disabled by default. To enable, set
# WalPath to where you want the WAL to be written (e.g.
# "data/mempool.wal").
wal_dir = ""

# Maximum number of transactions in the mempool
size = 5000

# Limit the total size of all txs in the mempool.
# This only accounts for raw transactions (e.g. given 1MB transactions and
# max_txs_bytes=5MB, mempool will only accept 5 transactions).
max_txs_bytes = 1073741824

# Size of the cache (used to filter transactions we saw earlier) in transactions
cache_size = 10000

# Do not remove invalid transactions from the cache (default: false)
# Set to true if it's not possible for any invalid transaction to become valid
# again in the future.
keep-invalid-txs-in-cache = false

# Maximum size of a single transaction.
# NOTE: the max size of a tx transmitted over the network is {max_tx_bytes}.
max_tx_bytes = 1048576

# Maximum size of a batch of transactions to send to a peer
# Including space needed by encoding (one varint per transaction).
# XXX: Unused due to https://github.com/tendermint/tendermint/issues/5796
max_batch_bytes = 0

# Experimental parameters to limit gossiping txs to up to the specified number of peers.
# We use two independent upper values for persistent and non-persistent peers.
# Unconditional peers are not affected by this feature.
# If we are connected to more than the specified number of persistent peers, only send txs to
# ExperimentalMaxGossipConnectionsToPersistentPeers of them. If one of those
# persistent peers disconnects, activate another persistent peer.
# Similarly for non-persistent peers, with an upper limit of
# ExperimentalMaxGossipConnectionsToNonPersistentPeers.
# If set to 0, the feature is disabled for the corresponding group of peers, that is, the
# number of active connections to that group of peers is not bounded.
# For non-persistent peers, if enabled, a value of 10 is recommended based on experimental
# performance results using the default P2P configuration.
experimental_max_gossip_connections_to_persistent_peers = 0
experimental_max_gossip_connections_to_non_persistent_peers = 0

#######################################################
###         State Sync Configuration Options        ###
#######################################################
[statesync]
# State sync rapidly bootstraps a new node by discovering, fetching, and restoring a state machine
# snapshot from peers instead of fetching and replaying historical blocks. Requires some peers in
# the network to take and serve state machine snapshots. State sync is not attempted if the node
# has any local state (LastBlockHeight > 0). The node will have a truncated block history,
# starting from the height of the snapshot.
enable = false

# RPC servers (comma-separated) for light client verification of the synced state machine and
# retrieval of state data for node bootstrapping. Also needs a trusted height and corresponding
# header hash obtained from a trusted source, and a period during which validators can be trusted.
#
# For Cosmos SDK-based chains, trust_period should usually be about 2/3 of the unbonding time (~2
# weeks) during which they can be financially punished (slashed) for misbehavior.
rpc_servers = ""
trust_height = 0
trust_hash = ""
trust_period = "168h0m0s"

# Time to spend discovering snapshots before initiating a restore.
discovery_time = "15s"

# Temporary directory for state sync snapshot chunks, defaults to the OS tempdir (typically /tmp).
# Will create a new, randomly named directory within, and remove it when done.
temp_dir = ""

# The timeout duration before re-requesting a chunk, possibly from a different
# peer (default: 1 minute).
chunk_request_timeout = "10s"

# The number of concurrent chunk fetchers to run (default: 1).
chunk_fetchers = "4"

#######################################################
###       Block Sync Configuration Options          ###
#######################################################
[blocksync]

# Block Sync version to use:
#
# In v0.37, v1 and v2 of the block sync protocols were deprecated.
# Please use v0 instead.
#
#   1) "v0" - the default block sync implementation
version = "v0"

#######################################################
###         Consensus Configuration Options         ###
#######################################################
[consensus]

wal_file = "data/cs.wal/wal"

# How long we wait for a proposal block before prevoting nil
timeout_propose = "3s"
# How much timeout_propose increases with each round
timeout_propose_delta = "500ms"
# How long we wait after receiving +2/3 prevotes for “anything” (ie. not a single block or nil)
timeout_prevote = "1s"
# How much the timeout_prevote increases with each round
timeout_prevote_delta = "500ms"
# How long we wait after receiving +2/3 precommits for “anything” (ie. not a single block or nil)
timeout_precommit = "1s"
# How much the timeout_precommit increases with each round
timeout_precommit_delta = "500ms"
# How long we wait after committing a block, before starting on the new
# height (this gives us a chance to receive some more precommits, even
# though we already have +2/3).
timeout_commit = "333s"

# How many blocks to look back to check existence of the node's consensus votes before joining consensus
# When non-zero, the node will panic upon restart
# if the same consensus key was used to sign {double_sign_check_height} last blocks.
# So, validators should stop the state machine, wait for some blocks, and then restart the state machine to avoid panic.
double_sign_check_height = 0

# Make progress as soon as we have all the precommits (as if TimeoutCommit = 0)
skip_timeout_commit = false

# EmptyBlocks mode and possible interval between empty blocks
create_empty_blocks = true
create_empty_blocks_interval = "0s"

# Reactor sleep duration parameters
peer_gossip_sleep_duration = "100ms"
peer_query_maj23_sleep_duration = "2s"

#######################################################
###         Storage Configuration Options           ###
#######################################################
[storage]

# Set to true to discard ABCI responses from the state store, which can save a
# considerable amount of disk space. Set to false to ensure ABCI responses are
# persisted. ABCI responses are required for /block_results RPC queries, and to
# reindex events in the command-line tool.
discard_abci_responses = false

#######################################################
###   Transaction Indexer Configuration Options     ###
#######################################################
[tx_index]

# What indexer to use for transactions
#
# The application will set which txs to index. In some cases a node operator will be able
# to decide which txs to index based on configuration set in the application.
#
# Options:
#   1) "null"
#   2) "kv" (default) - the simplest possible indexer, backed by key-value storage (defaults to levelDB; see DBBackend).
#               - When "kv" is chosen "tx.height" and "tx.hash" will always be indexed.
#   3) "psql" - the indexer services backed by PostgreSQL.
# When "kv" or "psql" is chosen "tx.height" and "tx.hash" will always be indexed.
indexer = "kv"

# The PostgreSQL connection configuration, the connection format:
#   postgresql://<user>:<password>@<host>:<port>/<db>?<opts>
psql-conn = ""

#######################################################
###       Instrumentation Configuration Options     ###
#######################################################
[instrumentation]

# When true, Prometheus metrics are served under /metrics on
# PrometheusListenAddr.
# Check out the documentation for the list of available metrics.
prometheus = false

# Address to listen for Prometheus collector(s) connections
prometheus_listen_addr = ":36660"

# Maximum number of simultaneous connections.
# If you want to accept a larger number than the default, make sure
# you increase your OS limits.
# 0 - unlimited.
max_open_connections = 3

# Instrumentation namespace
namespace = "cometbft"

Logs

8:11AM INF Unlocking keyring module=server
8:11AM INF starting ABCI with Tendermint module=server
8:11AM INF starting node with ABCI Tendermint in-process module=server
8:11AM INF service start impl=multiAppConn module=proxy msg="Starting multiAppConn service" server=node
8:11AM INF service start connection=query impl=localClient module=abci-client msg="Starting localClient service" server=node
8:11AM INF service start connection=snapshot impl=localClient module=abci-client msg="Starting localClient service" server=node
8:11AM INF service start connection=mempool impl=localClient module=abci-client msg="Starting localClient service" server=node
8:11AM INF service start connection=consensus impl=localClient module=abci-client msg="Starting localClient service" server=node
8:11AM INF service start impl=EventBus module=events msg="Starting EventBus service" server=node
8:11AM INF service start impl=PubSub module=pubsub msg="Starting PubSub service" server=node
8:11AM INF service start impl=IndexerService module=txindex msg="Starting IndexerService service" server=node
8:11AM INF ABCI Handshake App Info hash=E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855 height=0 module=consensus protocol-version=0 server=node software-version=0.0.5-4-g88a5ae2
8:11AM INF ABCI Replay Blocks appHeight=0 module=consensus server=node stateHeight=0 storeHeight=0
8:11AM INF InitChain chainID=tacchain_2390-1 initialHeight=1 module=server
8:11AM INF initializing blockchain state from genesis.json module=server
8:11AM INF created new capability module=ibc name=ports/transfer
8:11AM INF port binded module=x/ibc/port port=transfer
8:11AM INF claimed capability capability=1 module=transfer name=ports/transfer
8:11AM INF created new capability module=ibc name=ports/icahost
8:11AM INF port binded module=x/ibc/port port=icahost
8:11AM INF claimed capability capability=2 module=icahost name=ports/icahost
8:11AM INF asserting crisis invariants inv=1/13 module=x/crisis name=staking/module-accounts
8:11AM INF asserting crisis invariants inv=2/13 module=x/crisis name=staking/nonnegative-power
8:11AM INF asserting crisis invariants inv=3/13 module=x/crisis name=staking/positive-delegation
8:11AM INF asserting crisis invariants inv=4/13 module=x/crisis name=staking/delegator-shares
8:11AM INF asserting crisis invariants inv=5/13 module=x/crisis name=bank/nonnegative-outstanding
8:11AM INF asserting crisis invariants inv=6/13 module=x/crisis name=bank/total-supply
8:11AM INF asserting crisis invariants inv=7/13 module=x/crisis name=gov/module-account
8:11AM INF asserting crisis invariants inv=8/13 module=x/crisis name=group/Group-TotalWeight
8:11AM INF asserting crisis invariants inv=9/13 module=x/crisis name=transfer/total-escrow-per-denom
8:11AM INF asserting crisis invariants inv=10/13 module=x/crisis name=distribution/nonnegative-outstanding
8:11AM INF asserting crisis invariants inv=11/13 module=x/crisis name=distribution/can-withdraw
8:11AM INF asserting crisis invariants inv=12/13 module=x/crisis name=distribution/reference-count
8:11AM INF asserting crisis invariants inv=13/13 module=x/crisis name=distribution/module-account
8:11AM INF asserted all invariants duration=3.540724 height=0 module=x/crisis
8:11AM INF Completed ABCI Handshake - CometBFT and App are synced appHash=E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855 appHeight=0 module=consensus server=node
8:11AM INF Version info abci=2.0.0 block=11 commit_hash= module=server p2p=8 server=node tendermint_version=0.38.12
8:11AM INF This node is not a validator addr=A439D4FB5677E1D64E2F7D8450415E5388D04686 module=consensus pubKey=PubKeyEd25519{99F6B00ABF62BB5056623B3EAB9A5794CB549FA05B4B3BCF86415AB1C72C6BCA} server=node
8:11AM INF P2P Node ID ID=d35bf437263b36d688e2cee09aa09d0d9905162a file=.testnet/config/node_key.json module=p2p server=node
8:11AM INF Adding persistent peers addrs=["[email protected]:45120","[email protected]:45120","[email protected]:45110","[email protected]:45110"] module=p2p server=node
8:11AM INF Adding unconditional peer ids ids=[] module=p2p server=node
8:11AM INF Add our address to book [email protected]:36656 book=.testnet/config/addrbook.json module=p2p server=node
8:11AM INF service start impl=Node module=server msg="Starting Node service" server=node
8:11AM INF service start impl="P2P Switch" module=p2p msg="Starting P2P Switch service" server=node
8:11AM INF service start impl=Evidence module=evidence msg="Starting Evidence service" server=node
8:11AM INF service start impl=StateSync module=statesync msg="Starting StateSync service" server=node
8:11AM INF service start impl=PEX module=pex msg="Starting PEX service" server=node
8:11AM INF service start book=.testnet/config/addrbook.json impl=AddrBook module=p2p msg="Starting AddrBook service" server=node
8:11AM INF service start impl=Mempool module=mempool msg="Starting Mempool service" server=node
8:11AM INF service start impl=Reactor module=blocksync msg="Starting Reactor service" server=node
8:11AM INF service start impl=BlockPool module=blocksync msg="Starting BlockPool service" server=node
8:11AM INF service start impl=ConsensusReactor module=consensus msg="Starting Consensus service" server=node
8:11AM INF Reactor  module=consensus server=node waitSync=true
8:11AM INF Saving AddrBook to file book=.testnet/config/addrbook.json module=p2p server=node size=4
8:11AM INF Ensure peers module=pex numDialing=0 numInPeers=0 numOutPeers=0 numToDial=10 server=node
8:11AM INF serve module=rpc-server msg="Starting RPC HTTP server on 127.0.0.1:36657" server=node
8:11AM INF starting gRPC server... address=localhost:39090 module=grpc-server
8:11AM INF New websocket connection module=rpc-server protocol=websocket remote=127.0.0.1:50180 server=node
8:11AM INF service start impl=wsConnection module=rpc-server msg="Starting wsConnection service" protocol=websocket remote=127.0.0.1:50180 server=node
8:11AM INF Starting JSON-RPC server address=127.0.0.1:38545 module=server
8:11AM INF Reconnecting to peer [email protected]:45120 module=p2p server=node
8:11AM INF Reconnecting to peer [email protected]:45110 module=p2p server=node
8:11AM INF Reconnecting to peer [email protected]:45120 module=p2p server=node
8:11AM INF Reconnecting to peer [email protected]:45110 module=p2p server=node
8:11AM INF Error reconnecting to peer. Trying again [email protected]:45110 err="dial tcp 107.6.94.246:45110: i/o timeout" module=p2p server=node tries=0
8:11AM INF Error reconnecting to peer. Trying again [email protected]:45120 err="dial tcp 107.6.94.246:45120: i/o timeout" module=p2p server=node tries=0
8:11AM INF Error reconnecting to peer. Trying again [email protected]:45120 err="dial tcp 72.251.230.233:45120: i/o timeout" module=p2p server=node tries=0
8:11AM INF Error reconnecting to peer. Trying again [email protected]:45110 err="dial tcp 72.251.230.233:45110: i/o timeout" module=p2p server=node tries=0
8:11AM ERR Error dialing peer err="dial tcp 107.6.94.246:45120: i/o timeout" module=p2p server=node
8:11AM ERR Error dialing peer err="dial tcp 107.6.94.246:45110: i/o timeout" module=p2p server=node
8:11AM INF Starting JSON WebSocket server address=127.0.0.1:38546 module=server
8:11AM INF New websocket connection module=rpc-server protocol=websocket remote=127.0.0.1:50190 server=node
8:11AM INF service start impl=wsConnection module=rpc-server msg="Starting wsConnection service" protocol=websocket remote=127.0.0.1:50190 server=node
8:11AM INF Error reconnecting to peer. Trying again [email protected]:45120 err="dial tcp 72.251.230.233:45120: i/o timeout" module=p2p server=node tries=1
8:11AM INF Error reconnecting to peer. Trying again [email protected]:45110 err="dial tcp 107.6.94.246:45110: i/o timeout" module=p2p server=node tries=1
8:12AM INF Error reconnecting to peer. Trying again [email protected]:45120 err="dial tcp 107.6.94.246:45120: i/o timeout" module=p2p server=node tries=1
8:12AM INF Error reconnecting to peer. Trying again [email protected]:45110 err="dial tcp 72.251.230.233:45110: i/o timeout" module=p2p server=node tries=1

Additional information

Getting no peers / connection time out, please let me know if you need any additional information but for now i cannot connect to the network. 

Thanks,

Documentation Review

• I have read the README.md
• I have read the NETWORKS.md
• I checked for similar issues

[0xAJPanda]

I just realized that i need to follow the network.md process, i will do that and if i have an issue open an other one.

Thanks.