code-coverage.cmake

#
# Copyright (C) 2018-2024 by George Cave - gcave@stablecoder.ca
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may not
# use this file except in compliance with the License. You may obtain a copy of
# the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations under
# the License.

# USAGE: To enable any code coverage instrumentation/targets, the single CMake
# option of `CODE_COVERAGE` needs to be set to 'ON', either by GUI, ccmake, or
# on the command line.
#
# From this point, there are two primary methods for adding instrumentation to
# targets: 1 - A blanket instrumentation by calling `add_code_coverage()`, where
# all targets in that directory and all subdirectories are automatically
# instrumented. 2 - Per-target instrumentation by calling
# `target_code_coverage(<TARGET_NAME>)`, where the target is given and thus only
# that target is instrumented. This applies to both libraries and executables.
#
# To add coverage targets, such as calling `make ccov` to generate the actual
# coverage information for perusal or consumption, call
# `target_code_coverage(<TARGET_NAME>)` on an *executable* target.
#
# Example 1: All targets instrumented
#
# In this case, the coverage information reported will will be that of the
# `theLib` library target and `theExe` executable.
#
# 1a: Via global command
#
# ~~~
# add_code_coverage() # Adds instrumentation to all targets
#
# add_library(theLib lib.cpp)
#
# add_executable(theExe main.cpp)
# target_link_libraries(theExe PRIVATE theLib)
# target_code_coverage(theExe) # As an executable target, adds the 'ccov-theExe' target (instrumentation already added via global anyways) for generating code coverage reports.
# ~~~
#
# 1b: Via target commands
#
# ~~~
# add_library(theLib lib.cpp)
# target_code_coverage(theLib) # As a library target, adds coverage instrumentation but no targets.
#
# add_executable(theExe main.cpp)
# target_link_libraries(theExe PRIVATE theLib)
# target_code_coverage(theExe) # As an executable target, adds the 'ccov-theExe' target and instrumentation for generating code coverage reports.
# ~~~
#
# Example 2: Target instrumented, but with regex pattern of files to be excluded
# from report
#
# ~~~
# add_executable(theExe main.cpp non_covered.cpp)
# target_code_coverage(theExe EXCLUDE non_covered.cpp test/*) # As an executable target, the reports will exclude the non-covered.cpp file, and any files in a test/ folder.
# ~~~
#
# Example 3: Target added to the 'ccov' and 'ccov-all' targets
#
# ~~~
# add_code_coverage_all_targets(EXCLUDE test/*) # Adds the 'ccov-all' target set and sets it to exclude all files in test/ folders.
#
# add_executable(theExe main.cpp non_covered.cpp)
# target_code_coverage(theExe AUTO ALL EXCLUDE non_covered.cpp test/*) # As an executable target, adds to the 'ccov' and ccov-all' targets, and the reports will exclude the non-covered.cpp file, and any files in a test/ folder.
# ~~~

# Options
option(
  CODE_COVERAGE
  "Builds targets with code coverage instrumentation. (Requires GCC or Clang)"
  OFF)

# Programs
find_program(LLVM_COV_PATH llvm-cov)
find_program(LLVM_PROFDATA_PATH llvm-profdata)
find_program(LCOV_PATH lcov)
find_program(GENHTML_PATH genhtml)
# Hide behind the 'advanced' mode flag for GUI/ccmake
mark_as_advanced(FORCE LLVM_COV_PATH LLVM_PROFDATA_PATH LCOV_PATH GENHTML_PATH)

# Variables
set(CMAKE_COVERAGE_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/ccov)
set_property(GLOBAL PROPERTY JOB_POOLS ccov_serial_pool=1)

# Common initialization/checks
if(CODE_COVERAGE AND NOT CODE_COVERAGE_ADDED)
  set(CODE_COVERAGE_ADDED ON)

  # Common Targets
  file(MAKE_DIRECTORY ${CMAKE_COVERAGE_OUTPUT_DIRECTORY})

  if(CMAKE_C_COMPILER_ID MATCHES "(Apple)?[Cc]lang"
     OR CMAKE_CXX_COMPILER_ID MATCHES "(Apple)?[Cc]lang")

    if(CMAKE_C_COMPILER_ID MATCHES "AppleClang" OR CMAKE_CXX_COMPILER_ID
                                                   MATCHES "AppleClang")
      # When on macOS and using the Apple-provided toolchain, use the
      # XCode-provided llvm toolchain via `xcrun`
      message(
        STATUS
          "Building with XCode-provided llvm code coverage tools (via `xcrun`)")
      set(LLVM_COV_PATH xcrun llvm-cov)
      set(LLVM_PROFDATA_PATH xcrun llvm-profdata)
    else()
      # Use the regular llvm toolchain
      message(STATUS "Building with llvm code coverage tools")
    endif()

    if(NOT LLVM_COV_PATH)
      message(FATAL_ERROR "llvm-cov not found! Aborting.")
    else()
      # Version number checking for 'EXCLUDE' compatibility
      execute_process(COMMAND ${LLVM_COV_PATH} --version
                      OUTPUT_VARIABLE LLVM_COV_VERSION_CALL_OUTPUT)
      string(REGEX MATCH "[0-9]+\\.[0-9]+\\.[0-9]+" LLVM_COV_VERSION
                   ${LLVM_COV_VERSION_CALL_OUTPUT})

      if(LLVM_COV_VERSION VERSION_LESS "7.0.0")
        message(
          WARNING
            "target_code_coverage()/add_code_coverage_all_targets() 'EXCLUDE' option only available on llvm-cov >= 7.0.0"
        )
      endif()
    endif()

    # Targets
    if(${CMAKE_VERSION} VERSION_LESS "3.17.0")
      add_custom_target(
        ccov-clean
        COMMAND ${CMAKE_COMMAND} -E remove -f
                ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list
        COMMAND ${CMAKE_COMMAND} -E remove -f
                ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/profraw.list)
    else()
      add_custom_target(
        ccov-clean
        COMMAND ${CMAKE_COMMAND} -E rm -f
                ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list
        COMMAND ${CMAKE_COMMAND} -E rm -f
                ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/profraw.list)
    endif()

    # Used to get the shared object file list before doing the main all-
    # processing
    add_custom_target(
      ccov-libs
      COMMAND ;
      COMMENT "libs ready for coverage report.")

  elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES
                                              "GNU")
    # Messages
    message(STATUS "Building with lcov Code Coverage Tools")

    if(CMAKE_BUILD_TYPE)
      string(TOUPPER ${CMAKE_BUILD_TYPE} upper_build_type)
      if(NOT ${upper_build_type} STREQUAL "DEBUG")
        message(
          WARNING
            "Code coverage results with an optimized (non-Debug) build may be misleading"
        )
      endif()
    else()
      message(
        WARNING
          "Code coverage results with an optimized (non-Debug) build may be misleading"
      )
    endif()
    if(NOT LCOV_PATH)
      message(FATAL_ERROR "lcov not found! Aborting...")
    endif()
    if(NOT GENHTML_PATH)
      message(FATAL_ERROR "genhtml not found! Aborting...")
    endif()

    # Targets
    add_custom_target(ccov-clean COMMAND ${LCOV_PATH} --directory
                                         ${CMAKE_BINARY_DIR} --zerocounters)

  else()
    message(FATAL_ERROR "Code coverage requires Clang or GCC. Aborting.")
  endif()
endif()

# Adds code coverage instrumentation to a library, or instrumentation/targets
# for an executable target.
# ~~~
# EXECUTABLE ADDED TARGETS:
# GCOV/LCOV:
# ccov : Generates HTML code coverage report for every target added with 'AUTO' parameter.
# ccov-${TARGET_NAME} : Generates HTML code coverage report for the associated named target.
# ccov-all : Generates HTML code coverage report, merging every target added with 'ALL' parameter into a single detailed report.
#
# LLVM-COV:
# ccov : Generates HTML code coverage report for every target added with 'AUTO' parameter.
# ccov-report : Generates HTML code coverage report for every target added with 'AUTO' parameter.
# ccov-${TARGET_NAME} : Generates HTML code coverage report.
# ccov-report-${TARGET_NAME} : Prints to command line summary per-file coverage information.
# ccov-export-${TARGET_NAME} : Exports the coverage report to a JSON file.
# ccov-show-${TARGET_NAME} : Prints to command line detailed per-line coverage information.
# ccov-all : Generates HTML code coverage report, merging every target added with 'ALL' parameter into a single detailed report.
# ccov-all-report : Prints summary per-file coverage information for every target added with ALL' parameter to the command line.
# ccov-all-export : Exports the coverage report to a JSON file.
#
# Required:
# TARGET_NAME - Name of the target to generate code coverage for.
# Optional:
# PUBLIC - Sets the visibility for added compile options to targets to PUBLIC instead of the default of PRIVATE.
# INTERFACE - Sets the visibility for added compile options to targets to INTERFACE instead of the default of PRIVATE.
# PLAIN - Do not set any target visibility (backward compatibility with old cmake projects)
# AUTO - Adds the target to the 'ccov' target so that it can be run in a batch with others easily. Effective on executable targets.
# ALL - Adds the target to the 'ccov-all' and 'ccov-all-report' targets, which merge several executable targets coverage data to a single report. Effective on executable targets.
# EXTERNAL - For GCC's lcov, allows the profiling of 'external' files from the processing directory
# COVERAGE_TARGET_NAME - For executables ONLY, changes the outgoing target name so instead of `ccov-${TARGET_NAME}` it becomes `ccov-${COVERAGE_TARGET_NAME}`.
# EXCLUDE <PATTERNS> - Excludes files of the patterns provided from coverage. Note that GCC/lcov excludes by glob pattern, and clang/LLVM excludes via regex! **These do not copy to the 'all' targets.**
# OBJECTS <TARGETS> - For executables ONLY, if the provided targets are static or shared libraries, adds coverage information to the output
# PRE_ARGS <ARGUMENTS> - For executables ONLY, prefixes given arguments to the associated ccov-* executable call ($<PRE_ARGS> ccov-*)
# ARGS <ARGUMENTS> - For executables ONLY, appends the given arguments to the associated ccov-* executable call (ccov-* $<ARGS>)
# ~~~
function(target_code_coverage TARGET_NAME)
  # Argument parsing
  set(options AUTO ALL EXTERNAL PUBLIC INTERFACE PLAIN)
  set(single_value_keywords COVERAGE_TARGET_NAME)
  set(multi_value_keywords EXCLUDE OBJECTS PRE_ARGS ARGS)
  cmake_parse_arguments(
    target_code_coverage "${options}" "${single_value_keywords}"
    "${multi_value_keywords}" ${ARGN})

  # Set the visibility of target functions to PUBLIC, INTERFACE or default to
  # PRIVATE.
  if(target_code_coverage_PUBLIC)
    set(TARGET_VISIBILITY PUBLIC)
    set(TARGET_LINK_VISIBILITY PUBLIC)
  elseif(target_code_coverage_INTERFACE)
    set(TARGET_VISIBILITY INTERFACE)
    set(TARGET_LINK_VISIBILITY INTERFACE)
  elseif(target_code_coverage_PLAIN)
    set(TARGET_VISIBILITY PUBLIC)
    set(TARGET_LINK_VISIBILITY)
  else()
    set(TARGET_VISIBILITY PRIVATE)
    set(TARGET_LINK_VISIBILITY PRIVATE)
  endif()

  if(NOT target_code_coverage_COVERAGE_TARGET_NAME)
    # If a specific name was given, use that instead.
    set(target_code_coverage_COVERAGE_TARGET_NAME ${TARGET_NAME})
  endif()

  if(CODE_COVERAGE)

    # Add code coverage instrumentation to the target's linker command
    if(CMAKE_C_COMPILER_ID MATCHES "(Apple)?[Cc]lang"
       OR CMAKE_CXX_COMPILER_ID MATCHES "(Apple)?[Cc]lang")
      target_compile_options(${TARGET_NAME} ${TARGET_VISIBILITY}
                             -fprofile-instr-generate -fcoverage-mapping)
      target_link_options(${TARGET_NAME} ${TARGET_VISIBILITY}
                          -fprofile-instr-generate -fcoverage-mapping)
    elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES
                                                "GNU")
      target_compile_options(
        ${TARGET_NAME} ${TARGET_VISIBILITY} -fprofile-arcs -ftest-coverage
        $<$<COMPILE_LANGUAGE:CXX>:-fno-elide-constructors> -fno-default-inline)
      target_link_libraries(${TARGET_NAME} ${TARGET_LINK_VISIBILITY} gcov)
    endif()

    # Targets
    get_target_property(target_type ${TARGET_NAME} TYPE)

    # Add shared library to processing for 'all' targets
    if(target_type STREQUAL "SHARED_LIBRARY" AND target_code_coverage_ALL)
      if(CMAKE_C_COMPILER_ID MATCHES "(Apple)?[Cc]lang"
         OR CMAKE_CXX_COMPILER_ID MATCHES "(Apple)?[Cc]lang")
        add_custom_target(
          ccov-run-${target_code_coverage_COVERAGE_TARGET_NAME}
          COMMAND
            ${CMAKE_COMMAND} -E echo "-object=$<TARGET_FILE:${TARGET_NAME}>" >>
            ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list
          DEPENDS ${TARGET_NAME})

        if(NOT TARGET ccov-libs)
          message(
            FATAL_ERROR
              "Calling target_code_coverage with 'ALL' must be after a call to 'add_code_coverage_all_targets'."
          )
        endif()

        add_dependencies(ccov-libs
                         ccov-run-${target_code_coverage_COVERAGE_TARGET_NAME})
      endif()
    endif()

    # For executables add targets to run and produce output
    if(target_type STREQUAL "EXECUTABLE")
      if(CMAKE_C_COMPILER_ID MATCHES "(Apple)?[Cc]lang"
         OR CMAKE_CXX_COMPILER_ID MATCHES "(Apple)?[Cc]lang")

        # If there are static or shared objects to also work with, generate the
        # string to add them here
        foreach(LINK_OBJECT ${target_code_coverage_OBJECTS})
          # Check to see if the target is a shared object
          if(TARGET ${LINK_OBJECT})
            get_target_property(LINK_OBJECT_TYPE ${LINK_OBJECT} TYPE)
            if(${LINK_OBJECT_TYPE} STREQUAL "STATIC_LIBRARY"
               OR ${LINK_OBJECT_TYPE} STREQUAL "SHARED_LIBRARY")
              set(LINKED_OBJECTS ${LINKED_OBJECTS}
                                 -object=$<TARGET_FILE:${LINK_OBJECT}>)
            endif()
          endif()
        endforeach()

        # Run the executable, generating raw profile data Make the run data
        # available for further processing. Separated to allow Windows to run
        # this target serially.
        add_custom_target(
          ccov-run-${target_code_coverage_COVERAGE_TARGET_NAME}
          COMMAND
            ${CMAKE_COMMAND} -E env ${CMAKE_CROSSCOMPILING_EMULATOR}
            ${target_code_coverage_PRE_ARGS}
            LLVM_PROFILE_FILE=${target_code_coverage_COVERAGE_TARGET_NAME}.profraw
            $<TARGET_FILE:${TARGET_NAME}> ${target_code_coverage_ARGS}
          COMMAND
            ${CMAKE_COMMAND} -E echo "-object=$<TARGET_FILE:${TARGET_NAME}>"
            ${LINKED_OBJECTS} >>
            ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list
          COMMAND
            ${CMAKE_COMMAND} -E echo
            "${CMAKE_CURRENT_BINARY_DIR}/${target_code_coverage_COVERAGE_TARGET_NAME}.profraw"
            >> ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/profraw.list
          JOB_POOL ccov_serial_pool
          DEPENDS ccov-libs ${TARGET_NAME})

        # Merge the generated profile data so llvm-cov can process it
        add_custom_target(
          ccov-processing-${target_code_coverage_COVERAGE_TARGET_NAME}
          COMMAND
            ${LLVM_PROFDATA_PATH} merge -sparse
            ${target_code_coverage_COVERAGE_TARGET_NAME}.profraw -o
            ${target_code_coverage_COVERAGE_TARGET_NAME}.profdata
          DEPENDS ccov-run-${target_code_coverage_COVERAGE_TARGET_NAME})

        # Ignore regex only works on LLVM >= 7
        if(LLVM_COV_VERSION VERSION_GREATER_EQUAL "7.0.0")
          foreach(EXCLUDE_ITEM ${target_code_coverage_EXCLUDE})
            set(EXCLUDE_REGEX ${EXCLUDE_REGEX}
                              -ignore-filename-regex='${EXCLUDE_ITEM}')
          endforeach()
        endif()

        # Print out details of the coverage information to the command line
        add_custom_target(
          ccov-show-${target_code_coverage_COVERAGE_TARGET_NAME}
          COMMAND
            ${LLVM_COV_PATH} show $<TARGET_FILE:${TARGET_NAME}>
            -instr-profile=${target_code_coverage_COVERAGE_TARGET_NAME}.profdata
            -show-line-counts-or-regions ${LINKED_OBJECTS} ${EXCLUDE_REGEX}
          DEPENDS ccov-processing-${target_code_coverage_COVERAGE_TARGET_NAME})

        # Print out a summary of the coverage information to the command line
        add_custom_target(
          ccov-report-${target_code_coverage_COVERAGE_TARGET_NAME}
          COMMAND
            ${LLVM_COV_PATH} report $<TARGET_FILE:${TARGET_NAME}>
            -instr-profile=${target_code_coverage_COVERAGE_TARGET_NAME}.profdata
            ${LINKED_OBJECTS} ${EXCLUDE_REGEX}
          DEPENDS ccov-processing-${target_code_coverage_COVERAGE_TARGET_NAME})

        # Export coverage information so continuous integration tools (e.g.
        # Jenkins) can consume it
        add_custom_target(
          ccov-export-${target_code_coverage_COVERAGE_TARGET_NAME}
          COMMAND
            ${LLVM_COV_PATH} export $<TARGET_FILE:${TARGET_NAME}>
            -instr-profile=${target_code_coverage_COVERAGE_TARGET_NAME}.profdata
            -format="text" ${LINKED_OBJECTS} ${EXCLUDE_REGEX} >
            ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${target_code_coverage_COVERAGE_TARGET_NAME}.json
          DEPENDS ccov-processing-${target_code_coverage_COVERAGE_TARGET_NAME})

        # Generates HTML output of the coverage information for perusal
        add_custom_target(
          ccov-${target_code_coverage_COVERAGE_TARGET_NAME}
          COMMAND
            ${LLVM_COV_PATH} show $<TARGET_FILE:${TARGET_NAME}>
            -instr-profile=${target_code_coverage_COVERAGE_TARGET_NAME}.profdata
            -show-line-counts-or-regions
            -output-dir=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${target_code_coverage_COVERAGE_TARGET_NAME}
            -format="html" ${LINKED_OBJECTS} ${EXCLUDE_REGEX}
          DEPENDS ccov-processing-${target_code_coverage_COVERAGE_TARGET_NAME})

      elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES
                                                  "GNU")
        set(COVERAGE_INFO
            "${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${target_code_coverage_COVERAGE_TARGET_NAME}.info"
        )

        # Run the executable, generating coverage information
        add_custom_target(
          ccov-run-${target_code_coverage_COVERAGE_TARGET_NAME}
          COMMAND
            ${CMAKE_CROSSCOMPILING_EMULATOR} ${target_code_coverage_PRE_ARGS}
            $<TARGET_FILE:${TARGET_NAME}> ${target_code_coverage_ARGS}
          DEPENDS ${TARGET_NAME})

        # Generate exclusion string for use
        foreach(EXCLUDE_ITEM ${target_code_coverage_EXCLUDE})
          set(EXCLUDE_REGEX ${EXCLUDE_REGEX} --remove ${COVERAGE_INFO}
                            '${EXCLUDE_ITEM}')
        endforeach()

        if(EXCLUDE_REGEX)
          set(EXCLUDE_COMMAND ${LCOV_PATH} ${EXCLUDE_REGEX} --output-file
                              ${COVERAGE_INFO})
        else()
          set(EXCLUDE_COMMAND ;)
        endif()

        if(NOT ${target_code_coverage_EXTERNAL})
          set(EXTERNAL_OPTION --no-external)
        endif()

        # Capture coverage data
        if(${CMAKE_VERSION} VERSION_LESS "3.17.0")
          add_custom_target(
            ccov-capture-${target_code_coverage_COVERAGE_TARGET_NAME}
            COMMAND ${CMAKE_COMMAND} -E remove -f ${COVERAGE_INFO}
            COMMAND ${LCOV_PATH} --directory ${CMAKE_BINARY_DIR} --zerocounters
            COMMAND
              ${CMAKE_CROSSCOMPILING_EMULATOR} ${target_code_coverage_PRE_ARGS}
              $<TARGET_FILE:${TARGET_NAME}> ${target_code_coverage_ARGS}
            COMMAND
              ${LCOV_PATH} --directory ${CMAKE_BINARY_DIR} --base-directory
              ${CMAKE_SOURCE_DIR} --capture ${EXTERNAL_OPTION} --output-file
              ${COVERAGE_INFO}
            COMMAND ${EXCLUDE_COMMAND}
            DEPENDS ${TARGET_NAME})
        else()
          add_custom_target(
            ccov-capture-${target_code_coverage_COVERAGE_TARGET_NAME}
            COMMAND ${CMAKE_COMMAND} -E rm -f ${COVERAGE_INFO}
            COMMAND ${LCOV_PATH} --directory ${CMAKE_BINARY_DIR} --zerocounters
            COMMAND
              ${CMAKE_CROSSCOMPILING_EMULATOR} ${target_code_coverage_PRE_ARGS}
              $<TARGET_FILE:${TARGET_NAME}> ${target_code_coverage_ARGS}
            COMMAND
              ${LCOV_PATH} --directory ${CMAKE_BINARY_DIR} --base-directory
              ${CMAKE_SOURCE_DIR} --capture ${EXTERNAL_OPTION} --output-file
              ${COVERAGE_INFO}
            COMMAND ${EXCLUDE_COMMAND}
            DEPENDS ${TARGET_NAME})
        endif()

        # Generates HTML output of the coverage information for perusal
        add_custom_target(
          ccov-${target_code_coverage_COVERAGE_TARGET_NAME}
          COMMAND
            ${GENHTML_PATH} -o
            ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${target_code_coverage_COVERAGE_TARGET_NAME}
            ${COVERAGE_INFO}
          DEPENDS ccov-capture-${target_code_coverage_COVERAGE_TARGET_NAME})
      endif()

      add_custom_command(
        TARGET ccov-${target_code_coverage_COVERAGE_TARGET_NAME}
        POST_BUILD
        COMMAND ;
        COMMENT
          "Open ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${target_code_coverage_COVERAGE_TARGET_NAME}/index.html in your browser to view the coverage report."
      )

      # AUTO
      if(target_code_coverage_AUTO)
        if(NOT TARGET ccov)
          add_custom_target(ccov)
        endif()
        add_dependencies(ccov ccov-${target_code_coverage_COVERAGE_TARGET_NAME})

        if(NOT CMAKE_C_COMPILER_ID MATCHES "GNU" AND NOT CMAKE_CXX_COMPILER_ID
                                                     MATCHES "GNU")
          if(NOT TARGET ccov-report)
            add_custom_target(ccov-report)
          endif()
          add_dependencies(
            ccov-report
            ccov-report-${target_code_coverage_COVERAGE_TARGET_NAME})
        endif()
      endif()

      # ALL
      if(target_code_coverage_ALL)
        if(NOT TARGET ccov-all-processing)
          message(
            FATAL_ERROR
              "Calling target_code_coverage with 'ALL' must be after a call to 'add_code_coverage_all_targets'."
          )
        endif()

        add_dependencies(ccov-all-processing
                         ccov-run-${target_code_coverage_COVERAGE_TARGET_NAME})
      endif()
    endif()
  endif()
endfunction()

# Adds code coverage instrumentation to all targets in the current directory and
# any subdirectories. To add coverage instrumentation to only specific targets,
# use `target_code_coverage`.
function(add_code_coverage)
  if(CODE_COVERAGE)
    if(CMAKE_C_COMPILER_ID MATCHES "(Apple)?[Cc]lang"
       OR CMAKE_CXX_COMPILER_ID MATCHES "(Apple)?[Cc]lang")
      add_compile_options(-fprofile-instr-generate -fcoverage-mapping)
      add_link_options(-fprofile-instr-generate -fcoverage-mapping)
    elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES
                                                "GNU")
      add_compile_options(
        -fprofile-arcs -ftest-coverage
        $<$<COMPILE_LANGUAGE:CXX>:-fno-elide-constructors> -fno-default-inline)
      link_libraries(gcov)
    endif()
  endif()
endfunction()

# Adds the 'ccov-all' type targets that calls all targets added via
# `target_code_coverage` with the `ALL` parameter, but merges all the coverage
# data from them into a single large report  instead of the numerous smaller
# reports. Also adds the ccov-all-capture Generates an all-merged.info file, for
# use with coverage dashboards (e.g. codecov.io, coveralls).
# ~~~
# Optional:
# EXCLUDE <PATTERNS> - Excludes files of the patterns provided from coverage. Note that GCC/lcov excludes by glob pattern, and clang/LLVM excludes via regex!
# ~~~
function(add_code_coverage_all_targets)
  # Argument parsing
  set(multi_value_keywords EXCLUDE)
  cmake_parse_arguments(add_code_coverage_all_targets "" ""
                        "${multi_value_keywords}" ${ARGN})

  if(CODE_COVERAGE)
    if(CMAKE_C_COMPILER_ID MATCHES "(Apple)?[Cc]lang"
       OR CMAKE_CXX_COMPILER_ID MATCHES "(Apple)?[Cc]lang")

      # Merge the profile data for all of the run executables
      if(WIN32)
        add_custom_target(
          ccov-all-processing
          COMMAND
            powershell -Command $$FILELIST = Get-Content
            ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/profraw.list\; llvm-profdata.exe
            merge -o ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata
            -sparse $$FILELIST)
      else()
        add_custom_target(
          ccov-all-processing
          COMMAND
            ${LLVM_PROFDATA_PATH} merge -o
            ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata -sparse `cat
            ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/profraw.list`)
      endif()

      # Regex exclude only available for LLVM >= 7
      if(LLVM_COV_VERSION VERSION_GREATER_EQUAL "7.0.0")
        foreach(EXCLUDE_ITEM ${add_code_coverage_all_targets_EXCLUDE})
          set(EXCLUDE_REGEX ${EXCLUDE_REGEX}
                            -ignore-filename-regex='${EXCLUDE_ITEM}')
        endforeach()
      endif()

      # Print summary of the code coverage information to the command line
      if(WIN32)
        add_custom_target(
          ccov-all-report
          COMMAND
            powershell -Command $$FILELIST = Get-Content
            ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list\; llvm-cov.exe
            report $$FILELIST
            -instr-profile=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata
            ${EXCLUDE_REGEX}
          DEPENDS ccov-all-processing)
      else()
        add_custom_target(
          ccov-all-report
          COMMAND
            ${LLVM_COV_PATH} report `cat
            ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list`
            -instr-profile=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata
            ${EXCLUDE_REGEX}
          DEPENDS ccov-all-processing)
      endif()

      # Export coverage information so continuous integration tools (e.g.
      # Jenkins) can consume it
      if(WIN32)
        add_custom_target(
          ccov-all-export
          COMMAND
            powershell -Command $$FILELIST = Get-Content
            ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list\; llvm-cov.exe
            export $$FILELIST
            -instr-profile=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata
            -format="text" ${EXCLUDE_REGEX} >
            ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/coverage.json
          DEPENDS ccov-all-processing)
      else()
        add_custom_target(
          ccov-all-export
          COMMAND
            ${LLVM_COV_PATH} export `cat
            ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list`
            -instr-profile=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata
            -format="text" ${EXCLUDE_REGEX} >
            ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/coverage.json
          DEPENDS ccov-all-processing)
      endif()

      # Generate HTML output of all added targets for perusal
      if(WIN32)
        add_custom_target(
          ccov-all
          COMMAND
            powershell -Command $$FILELIST = Get-Content
            ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list\; llvm-cov.exe show
            $$FILELIST
            -instr-profile=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata
            -show-line-counts-or-regions
            -output-dir=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged
            -format="html" ${EXCLUDE_REGEX}
          DEPENDS ccov-all-processing)
      else()
        add_custom_target(
          ccov-all
          COMMAND
            ${LLVM_COV_PATH} show `cat
            ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list`
            -instr-profile=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata
            -show-line-counts-or-regions
            -output-dir=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged
            -format="html" ${EXCLUDE_REGEX}
          DEPENDS ccov-all-processing)
      endif()

    elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES
                                                "GNU")
      set(COVERAGE_INFO "${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.info")

      # Nothing required for gcov
      add_custom_target(ccov-all-processing COMMAND ;)

      # Exclusion regex string creation
      set(EXCLUDE_REGEX)
      foreach(EXCLUDE_ITEM ${add_code_coverage_all_targets_EXCLUDE})
        set(EXCLUDE_REGEX ${EXCLUDE_REGEX} --remove ${COVERAGE_INFO}
                          '${EXCLUDE_ITEM}')
      endforeach()

      if(EXCLUDE_REGEX)
        set(EXCLUDE_COMMAND ${LCOV_PATH} ${EXCLUDE_REGEX} --output-file
                            ${COVERAGE_INFO})
      else()
        set(EXCLUDE_COMMAND ;)
      endif()

      # Capture coverage data
      if(${CMAKE_VERSION} VERSION_LESS "3.17.0")
        add_custom_target(
          ccov-all-capture
          COMMAND ${CMAKE_COMMAND} -E remove -f ${COVERAGE_INFO}
          COMMAND ${LCOV_PATH} --directory ${CMAKE_BINARY_DIR} --capture
                  --output-file ${COVERAGE_INFO}
          COMMAND ${EXCLUDE_COMMAND}
          DEPENDS ccov-all-processing)
      else()
        add_custom_target(
          ccov-all-capture
          COMMAND ${CMAKE_COMMAND} -E rm -f ${COVERAGE_INFO}
          COMMAND ${LCOV_PATH} --directory ${CMAKE_BINARY_DIR} --capture
                  --output-file ${COVERAGE_INFO}
          COMMAND ${EXCLUDE_COMMAND}
          DEPENDS ccov-all-processing)
      endif()

      # Generates HTML output of all targets for perusal
      add_custom_target(
        ccov-all
        COMMAND ${GENHTML_PATH} -o ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged
                ${COVERAGE_INFO} -p ${CMAKE_SOURCE_DIR}
        DEPENDS ccov-all-capture)

    endif()

    add_custom_command(
      TARGET ccov-all
      POST_BUILD
      COMMAND ;
      COMMENT
        "Open ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged/index.html in your browser to view the coverage report."
    )
  endif()
endfunction()