+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32h7xx_it.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+extern ETH_HandleTypeDef heth;
+extern SD_HandleTypeDef hsd1;
+extern SD_HandleTypeDef hsd2;
+extern PCD_HandleTypeDef hpcd_USB_OTG_FS;
+/* USER CODE BEGIN EV */
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/* Cortex Processor Interruption and Exception Handlers */
+/******************************************************************************/
+/**
+ * @brief This function handles Non maskable interrupt.
+ */
+void NMI_Handler(void)
+{
+ /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+ /* USER CODE END NonMaskableInt_IRQn 0 */
+ /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+
+ /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+ * @brief This function handles Hard fault interrupt.
+ */
+void HardFault_Handler(void)
+{
+ /* USER CODE BEGIN HardFault_IRQn 0 */
+
+ /* USER CODE END HardFault_IRQn 0 */
+ while (1)
+ {
+ /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+ /* USER CODE END W1_HardFault_IRQn 0 */
+ }
+}
+
+/**
+ * @brief This function handles Memory management fault.
+ */
+void MemManage_Handler(void)
+{
+ /* USER CODE BEGIN MemoryManagement_IRQn 0 */
+
+ /* USER CODE END MemoryManagement_IRQn 0 */
+ while (1)
+ {
+ /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
+ /* USER CODE END W1_MemoryManagement_IRQn 0 */
+ }
+}
+
+/**
+ * @brief This function handles Pre-fetch fault, memory access fault.
+ */
+void BusFault_Handler(void)
+{
+ /* USER CODE BEGIN BusFault_IRQn 0 */
+
+ /* USER CODE END BusFault_IRQn 0 */
+ while (1)
+ {
+ /* USER CODE BEGIN W1_BusFault_IRQn 0 */
+ /* USER CODE END W1_BusFault_IRQn 0 */
+ }
+}
+
+/**
+ * @brief This function handles Undefined instruction or illegal state.
+ */
+void UsageFault_Handler(void)
+{
+ /* USER CODE BEGIN UsageFault_IRQn 0 */
+
+ /* USER CODE END UsageFault_IRQn 0 */
+ while (1)
+ {
+ /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
+ /* USER CODE END W1_UsageFault_IRQn 0 */
+ }
+}
+
+/**
+ * @brief This function handles System service call via SWI instruction.
+ */
+void SVC_Handler(void)
+{
+ /* USER CODE BEGIN SVCall_IRQn 0 */
+
+ /* USER CODE END SVCall_IRQn 0 */
+ /* USER CODE BEGIN SVCall_IRQn 1 */
+
+ /* USER CODE END SVCall_IRQn 1 */
+}
+
+/**
+ * @brief This function handles Debug monitor.
+ */
+void DebugMon_Handler(void)
+{
+ /* USER CODE BEGIN DebugMonitor_IRQn 0 */
+
+ /* USER CODE END DebugMonitor_IRQn 0 */
+ /* USER CODE BEGIN DebugMonitor_IRQn 1 */
+
+ /* USER CODE END DebugMonitor_IRQn 1 */
+}
+
+/**
+ * @brief This function handles Pendable request for system service.
+ */
+void PendSV_Handler(void)
+{
+ /* USER CODE BEGIN PendSV_IRQn 0 */
+
+ /* USER CODE END PendSV_IRQn 0 */
+ /* USER CODE BEGIN PendSV_IRQn 1 */
+
+ /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+ * @brief This function handles System tick timer.
+ */
+void SysTick_Handler(void)
+{
+ /* USER CODE BEGIN SysTick_IRQn 0 */
+
+ /* USER CODE END SysTick_IRQn 0 */
+ HAL_IncTick();
+ /* USER CODE BEGIN SysTick_IRQn 1 */
+
+ /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32H7xx Peripheral Interrupt Handlers */
+/* Add here the Interrupt Handlers for the used peripherals. */
+/* For the available peripheral interrupt handler names, */
+/* please refer to the startup file (startup_stm32h7xx.s). */
+/******************************************************************************/
+
+/**
+ * @brief This function handles SDMMC1 global interrupt.
+ */
+void SDMMC1_IRQHandler(void)
+{
+ /* USER CODE BEGIN SDMMC1_IRQn 0 */
+
+ /* USER CODE END SDMMC1_IRQn 0 */
+ HAL_SD_IRQHandler(&hsd1);
+ /* USER CODE BEGIN SDMMC1_IRQn 1 */
+
+ /* USER CODE END SDMMC1_IRQn 1 */
+}
+
+/**
+ * @brief This function handles Ethernet global interrupt.
+ */
+void ETH_IRQHandler(void)
+{
+ /* USER CODE BEGIN ETH_IRQn 0 */
+
+ /* USER CODE END ETH_IRQn 0 */
+ HAL_ETH_IRQHandler(&heth);
+ /* USER CODE BEGIN ETH_IRQn 1 */
+
+ /* USER CODE END ETH_IRQn 1 */
+}
+
+/**
+ * @brief This function handles USB On The Go FS global interrupt.
+ */
+void OTG_FS_IRQHandler(void)
+{
+ /* USER CODE BEGIN OTG_FS_IRQn 0 */
+
+ /* USER CODE END OTG_FS_IRQn 0 */
+ HAL_PCD_IRQHandler(&hpcd_USB_OTG_FS);
+ /* USER CODE BEGIN OTG_FS_IRQn 1 */
+
+ /* USER CODE END OTG_FS_IRQn 1 */
+}
+
+/**
+ * @brief This function handles SDMMC2 global interrupt.
+ */
+void SDMMC2_IRQHandler(void)
+{
+ /* USER CODE BEGIN SDMMC2_IRQn 0 */
+
+ /* USER CODE END SDMMC2_IRQn 0 */
+ HAL_SD_IRQHandler(&hsd2);
+ /* USER CODE BEGIN SDMMC2_IRQn 1 */
+
+ /* USER CODE END SDMMC2_IRQn 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/projects/lrs007_lora_pkt_sniffer/board/CubeMX_Config/Core/Src/system_stm32h7xx.c b/projects/lrs007_lora_pkt_sniffer/board/CubeMX_Config/Core/Src/system_stm32h7xx.c
new file mode 100644
index 00000000..96f8a5bf
--- /dev/null
+++ b/projects/lrs007_lora_pkt_sniffer/board/CubeMX_Config/Core/Src/system_stm32h7xx.c
@@ -0,0 +1,421 @@
+/**
+ ******************************************************************************
+ * @file system_stm32h7xx.c
+ * @author MCD Application Team
+ * @brief CMSIS Cortex-Mx Device Peripheral Access Layer System Source File.
+ *
+ * This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32h7xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock, it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ *
+ ******************************************************************************
+ * @attention
+ *
+ *
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32h7xx_system
+ * @{
+ */
+
+/** @addtogroup STM32H7xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32h7xx.h"
+#include
+#if !defined (HSE_VALUE)
+#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (CSI_VALUE)
+ #define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* CSI_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32H7xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32H7xx_System_Private_Defines
+ * @{
+ */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use initialized data in D2 domain SRAM (AHB SRAM) */
+/* #define DATA_IN_D2_SRAM */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET 0x00000000UL /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+/******************************************************************************/
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32H7xx_System_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32H7xx_System_Private_Variables
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+ uint32_t SystemCoreClock = 64000000;
+ uint32_t SystemD2Clock = 64000000;
+ const uint8_t D1CorePrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9};
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32H7xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32H7xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system
+ * Initialize the FPU setting and vector table location
+ * configuration.
+ * @param None
+ * @retval None
+ */
+void SystemInit (void)
+{
+#if defined (DATA_IN_D2_SRAM)
+ __IO uint32_t tmpreg;
+#endif /* DATA_IN_D2_SRAM */
+
+ /* FPU settings ------------------------------------------------------------*/
+ #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ SCB->CPACR |= ((3UL << (10*2))|(3UL << (11*2))); /* set CP10 and CP11 Full Access */
+ #endif
+ /* Reset the RCC clock configuration to the default reset state ------------*/
+
+ /* Increasing the CPU frequency */
+ if(FLASH_LATENCY_DEFAULT > (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)))
+ {
+ /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+ MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(FLASH_LATENCY_DEFAULT));
+ }
+
+ /* Set HSION bit */
+ RCC->CR |= RCC_CR_HSION;
+
+ /* Reset CFGR register */
+ RCC->CFGR = 0x00000000;
+
+ /* Reset HSEON, HSECSSON, CSION, HSI48ON, CSIKERON, PLL1ON, PLL2ON and PLL3ON bits */
+ RCC->CR &= 0xEAF6ED7FU;
+
+ /* Decreasing the number of wait states because of lower CPU frequency */
+ if(FLASH_LATENCY_DEFAULT < (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)))
+ {
+ /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+ MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(FLASH_LATENCY_DEFAULT));
+ }
+
+#if defined(D3_SRAM_BASE)
+ /* Reset D1CFGR register */
+ RCC->D1CFGR = 0x00000000;
+
+ /* Reset D2CFGR register */
+ RCC->D2CFGR = 0x00000000;
+
+ /* Reset D3CFGR register */
+ RCC->D3CFGR = 0x00000000;
+#else
+ /* Reset CDCFGR1 register */
+ RCC->CDCFGR1 = 0x00000000;
+
+ /* Reset CDCFGR2 register */
+ RCC->CDCFGR2 = 0x00000000;
+
+ /* Reset SRDCFGR register */
+ RCC->SRDCFGR = 0x00000000;
+#endif
+ /* Reset PLLCKSELR register */
+ RCC->PLLCKSELR = 0x02020200;
+
+ /* Reset PLLCFGR register */
+ RCC->PLLCFGR = 0x01FF0000;
+ /* Reset PLL1DIVR register */
+ RCC->PLL1DIVR = 0x01010280;
+ /* Reset PLL1FRACR register */
+ RCC->PLL1FRACR = 0x00000000;
+
+ /* Reset PLL2DIVR register */
+ RCC->PLL2DIVR = 0x01010280;
+
+ /* Reset PLL2FRACR register */
+
+ RCC->PLL2FRACR = 0x00000000;
+ /* Reset PLL3DIVR register */
+ RCC->PLL3DIVR = 0x01010280;
+
+ /* Reset PLL3FRACR register */
+ RCC->PLL3FRACR = 0x00000000;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= 0xFFFBFFFFU;
+
+ /* Disable all interrupts */
+ RCC->CIER = 0x00000000;
+
+#if (STM32H7_DEV_ID == 0x450UL)
+ /* dual core CM7 or single core line */
+ if((DBGMCU->IDCODE & 0xFFFF0000U) < 0x20000000U)
+ {
+ /* if stm32h7 revY*/
+ /* Change the switch matrix read issuing capability to 1 for the AXI SRAM target (Target 7) */
+ *((__IO uint32_t*)0x51008108) = 0x000000001U;
+ }
+#endif
+
+#if defined (DATA_IN_D2_SRAM)
+ /* in case of initialized data in D2 SRAM (AHB SRAM) , enable the D2 SRAM clock (AHB SRAM clock) */
+#if defined(RCC_AHB2ENR_D2SRAM3EN)
+ RCC->AHB2ENR |= (RCC_AHB2ENR_D2SRAM1EN | RCC_AHB2ENR_D2SRAM2EN | RCC_AHB2ENR_D2SRAM3EN);
+#elif defined(RCC_AHB2ENR_D2SRAM2EN)
+ RCC->AHB2ENR |= (RCC_AHB2ENR_D2SRAM1EN | RCC_AHB2ENR_D2SRAM2EN);
+#else
+ RCC->AHB2ENR |= (RCC_AHB2ENR_AHBSRAM1EN | RCC_AHB2ENR_AHBSRAM2EN);
+#endif /* RCC_AHB2ENR_D2SRAM3EN */
+
+ tmpreg = RCC->AHB2ENR;
+ (void) tmpreg;
+#endif /* DATA_IN_D2_SRAM */
+
+#if defined(DUAL_CORE) && defined(CORE_CM4)
+ /* Configure the Vector Table location add offset address for cortex-M4 ------------------*/
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = D2_AXISRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+ SCB->VTOR = FLASH_BANK2_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif /* VECT_TAB_SRAM */
+
+#else
+
+ /*
+ * Disable the FMC bank1 (enabled after reset).
+ * This, prevents CPU speculation access on this bank which blocks the use of FMC during
+ * 24us. During this time the others FMC master (such as LTDC) cannot use it!
+ */
+ FMC_Bank1_R->BTCR[0] = 0x000030D2;
+
+ /* Configure the Vector Table location add offset address for cortex-M7 ------------------*/
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = D1_AXISRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal AXI-RAM */
+#else
+ SCB->VTOR = FLASH_BANK1_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+
+#endif /*DUAL_CORE && CORE_CM4*/
+
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock , it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is CSI, SystemCoreClock will contain the CSI_VALUE(*)
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**)
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the CSI_VALUE(*),
+ * HSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors.
+ *
+ * (*) CSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value
+ * 4 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ * (**) HSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value
+ * 64 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (***)HSE_VALUE is a constant defined in stm32h7xx_hal.h file (default value
+ * 25 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate (void)
+{
+ uint32_t pllp, pllsource, pllm, pllfracen, hsivalue, tmp;
+ uint32_t common_system_clock;
+ float_t fracn1, pllvco;
+
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+
+ switch (RCC->CFGR & RCC_CFGR_SWS)
+ {
+ case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */
+ common_system_clock = (uint32_t) (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3));
+ break;
+
+ case RCC_CFGR_SWS_CSI: /* CSI used as system clock source */
+ common_system_clock = CSI_VALUE;
+ break;
+
+ case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */
+ common_system_clock = HSE_VALUE;
+ break;
+
+ case RCC_CFGR_SWS_PLL1: /* PLL1 used as system clock source */
+
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLLM) * PLLN
+ SYSCLK = PLL_VCO / PLLR
+ */
+ pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC);
+ pllm = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM1)>> 4) ;
+ pllfracen = ((RCC->PLLCFGR & RCC_PLLCFGR_PLL1FRACEN)>>RCC_PLLCFGR_PLL1FRACEN_Pos);
+ fracn1 = (float_t)(uint32_t)(pllfracen* ((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN1)>> 3));
+
+ if (pllm != 0U)
+ {
+ switch (pllsource)
+ {
+ case RCC_PLLCKSELR_PLLSRC_HSI: /* HSI used as PLL clock source */
+
+ hsivalue = (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)) ;
+ pllvco = ( (float_t)hsivalue / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 );
+
+ break;
+
+ case RCC_PLLCKSELR_PLLSRC_CSI: /* CSI used as PLL clock source */
+ pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 );
+ break;
+
+ case RCC_PLLCKSELR_PLLSRC_HSE: /* HSE used as PLL clock source */
+ pllvco = ((float_t)HSE_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 );
+ break;
+
+ default:
+ pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 );
+ break;
+ }
+ pllp = (((RCC->PLL1DIVR & RCC_PLL1DIVR_P1) >>9) + 1U ) ;
+ common_system_clock = (uint32_t)(float_t)(pllvco/(float_t)pllp);
+ }
+ else
+ {
+ common_system_clock = 0U;
+ }
+ break;
+
+ default:
+ common_system_clock = CSI_VALUE;
+ break;
+ }
+
+ /* Compute SystemClock frequency --------------------------------------------------*/
+#if defined (RCC_D1CFGR_D1CPRE)
+ tmp = D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1CPRE)>> RCC_D1CFGR_D1CPRE_Pos];
+
+ /* common_system_clock frequency : CM7 CPU frequency */
+ common_system_clock >>= tmp;
+
+ /* SystemD2Clock frequency : CM4 CPU, AXI and AHBs Clock frequency */
+ SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_HPRE)>> RCC_D1CFGR_HPRE_Pos]) & 0x1FU));
+
+#else
+ tmp = D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_CDCPRE)>> RCC_CDCFGR1_CDCPRE_Pos];
+
+ /* common_system_clock frequency : CM7 CPU frequency */
+ common_system_clock >>= tmp;
+
+ /* SystemD2Clock frequency : AXI and AHBs Clock frequency */
+ SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_HPRE)>> RCC_CDCFGR1_HPRE_Pos]) & 0x1FU));
+
+#endif
+
+#if defined(DUAL_CORE) && defined(CORE_CM4)
+ SystemCoreClock = SystemD2Clock;
+#else
+ SystemCoreClock = common_system_clock;
+#endif /* DUAL_CORE && CORE_CM4 */
+}
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/projects/lrs007_lora_pkt_sniffer/libraries b/projects/lrs007_lora_pkt_sniffer/libraries
deleted file mode 120000
index 195d8f09..00000000
--- a/projects/lrs007_lora_pkt_sniffer/libraries
+++ /dev/null
@@ -1 +0,0 @@
-../../libraries
\ No newline at end of file
diff --git a/projects/lrs007_lora_pkt_sniffer/rt-thread b/projects/lrs007_lora_pkt_sniffer/rt-thread
deleted file mode 120000
index dd279a13..00000000
--- a/projects/lrs007_lora_pkt_sniffer/rt-thread
+++ /dev/null
@@ -1 +0,0 @@
-../../rt-thread
\ No newline at end of file
diff --git a/projects/lrs007_lorawan_gateway/.config b/projects/lrs007_lorawan_gateway/.config
index 84f855a0..9f18c148 100644
--- a/projects/lrs007_lorawan_gateway/.config
+++ b/projects/lrs007_lorawan_gateway/.config
@@ -564,6 +564,7 @@ CONFIG_PKG_LORA_PKT_FWD_VER="v1.0.0"
# CONFIG_PKG_USING_RAPIDJSON is not set
# CONFIG_PKG_USING_JSMN is not set
# CONFIG_PKG_USING_AGILE_JSMN is not set
+# CONFIG_PKG_USING_PARSON is not set
# end of JSON: JavaScript Object Notation, a lightweight data-interchange format
#
@@ -737,6 +738,7 @@ CONFIG_PKG_EASYFLASH_VER_NUM=0x40100
# CONFIG_PKG_USING_UC_MODBUS is not set
# end of Micrium: Micrium software products porting for RT-Thread
+# CONFIG_PKG_USING_FREERTOS_WRAPPER is not set
# CONFIG_PKG_USING_CAIRO is not set
# CONFIG_PKG_USING_PIXMAN is not set
# CONFIG_PKG_USING_PARTITION is not set
@@ -779,8 +781,10 @@ CONFIG_PKG_EASYFLASH_VER_NUM=0x40100
# CONFIG_PKG_USING_REALTEK_AMEBA is not set
# CONFIG_PKG_USING_SHT2X is not set
# CONFIG_PKG_USING_SHT3X is not set
+# CONFIG_PKG_USING_ADT74XX is not set
# CONFIG_PKG_USING_AS7341 is not set
# CONFIG_PKG_USING_STM32_SDIO is not set
+# CONFIG_PKG_USING_ESP_IDF is not set
# CONFIG_PKG_USING_ICM20608 is not set
# CONFIG_PKG_USING_BUTTON is not set
# CONFIG_PKG_USING_PCF8574 is not set
@@ -792,7 +796,14 @@ CONFIG_PKG_EASYFLASH_VER_NUM=0x40100
# CONFIG_PKG_USING_NRF5X_SDK is not set
# CONFIG_PKG_USING_NRFX is not set
# CONFIG_PKG_USING_WM_LIBRARIES is not set
+
+#
+# Kendryte SDK
+#
+# CONFIG_PKG_USING_K210_SDK is not set
# CONFIG_PKG_USING_KENDRYTE_SDK is not set
+# end of Kendryte SDK
+
# CONFIG_PKG_USING_INFRARED is not set
# CONFIG_PKG_USING_MULTI_INFRARED is not set
# CONFIG_PKG_USING_AGILE_BUTTON is not set
@@ -885,6 +896,8 @@ CONFIG_PKG_LORA_GW_DRIVER_LIB_VER="v0.3.0"
# CONFIG_PKG_USING_MB85RS16 is not set
# CONFIG_PKG_USING_CW2015 is not set
# CONFIG_PKG_USING_RFM300 is not set
+# CONFIG_PKG_USING_IO_INPUT_FILTER is not set
+# CONFIG_PKG_USING_RASPBERRYPI_PICO_SDK is not set
# end of peripheral libraries and drivers
#
@@ -1040,7 +1053,7 @@ CONFIG_BSP_USING_ONCHIP_RTC=y
CONFIG_ART_PI_USING_WIFI_6212_LIB=y
CONFIG_ART_PI_USING_OTA_LIB=y
# CONFIG_ART_PI_TouchGFX_LIB is not set
-# CONFIG_ART_PI_USING_FTP_LIB is not set
+CONFIG_ART_PI_USING_FTP_LIB=y
# end of External Libraries
CONFIG_FIRMWARE_EXEC_USING_QSPI_FLASH=y
diff --git a/projects/lrs007_lorawan_gateway/.cproject b/projects/lrs007_lorawan_gateway/.cproject
index 65f54f8a..34d1a096 100644
--- a/projects/lrs007_lorawan_gateway/.cproject
+++ b/projects/lrs007_lorawan_gateway/.cproject
@@ -71,16 +71,15 @@
+
-
-
@@ -133,6 +132,7 @@