diff --git a/Arduino/PwdrFirmware2_0_mk1/PwdrFirmware2_0_mk1.ino b/Arduino/PwdrFirmware2_0_mk1/PwdrFirmware2_0_mk1.ino new file mode 100644 index 0000000..f50bd47 --- /dev/null +++ b/Arduino/PwdrFirmware2_0_mk1/PwdrFirmware2_0_mk1.ino @@ -0,0 +1,209 @@ +/*MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM + MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMNmmmmmNMMMMMMMMMMMMMMMMM + MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM/ /MMMMMMMMMMMMMMMMM + MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMhy. hMMMMMMMMMMMMMMMMM + MMMMMMMMMMMMMMMMMMNNNNMMMMMMMMMMMMMMMMMMMMMMNMMMMMMMNNNNNm -MMMMMMMMMMNNNMMMMM + MMMMMMMMMy////oNh+:..-oNN/////sMMMN+///MMMMo:/oNMMdo:-.-:: yMy////oMdo:./MMMMM + MMMMMMMMM/-` /`-:` od-- /MMN+ MMMs sMN+` `:++- .NM/-` +``..dMMMMM + MMMMMMMMMMM- :mMMh :MMM. /MMo `` MMy `yMm- -dMMMs oMMMM- .smmmMMMMMM + MMMMMMMMMMd -NMMMh +MMM: /Ms s` Md` `yMM/ `mMMMM- `mMMMd .mMMMMMMMMMM + MMMMMMMMMM/ hMMMM+ dMMM/ +h` oN m. `hMMd /MMMMh /MMMM: dMMMMMMMMMMM + MMMMMMMMMm` .NMMMy oMMMMo /` oMN .: `hMMMs sMMMd. dMMMd :MMMNddNMMMMM + MMMMMMMMMo :hdh+` `oNMMMMs +NMm .dMMMMs -hho.. `yyNM/ hMMd.``.hMMMM + MMMMMMMMN` `` ./dMMMMMMy +NMMd .dMMMMMN: `:hy.```.MN```-MMMh` `yMMMM + MMMMMMMMs +dhyhdmMMMMMMMMNdddNMMMNdddmMMMMMMMNdyyhmNMMNmmmmMNmmmNMMMMmhhmMMMMM + MMMMMNdd. ydMMddddddddddddddddddddddddddddddddddddddddddddddddddddddddddNMMMMM + MMMMMy`` `.Mm``````````````````````````````````````````````````````````mMMMMM + MMMMMmdddddddmMNddddddddddddddddddddddddddddddddddddddddddddddddddddddddddMMMMMM + MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM + MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM + MMMMMMMMMMM MMMMMMMMMMM + MMMMMMMMMMM Software for Pwdr three-dimensional powder based printer MMMMMMMMMMM + MMMMMMMMMMM Author: Alex Budding MMMMMMMMMMM + MMMMMMMMMMM E-mail: pwdr@wetterhorn.nl MMMMMMMMMMM + MMMMMMMMMMM MMMMMMMMMMM + MMMMMMMMMMM This software released under the GNU/GPL license MMMMMMMMMMM + MMMMMMMMMMM MMMMMMMMMMM + MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM + MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM*/ + +///////////////////////////////////////////////////////////////////////////////// +// The void spray_ink() is adapted from DIY Inkjet Printer Firmware written by // +// Nicholas C Lewis (2011), see thingiverse.com/thing:8542 // +///////////////////////////////////////////////////////////////////////////////// + +// Inlcude libraries for stepper motor [http://www.open.com.au/mikem/arduino/AccelStepper] +#include +#include + +// How many times a single spot is printed +int saturation = 1; + +// Declare: print width, length (rows of 12 nozzles), height and saturation +int pwdrconfig[] = {480,40,40,15}; + +// Bytes for the nozzle control +byte lower = B00000000; +byte upper = B0000; + +// SD card information +File dataFile; +int chipSelect = 53; + +// Initilize stepper driver, 11 Direction and 12 Step +AccelStepper stepperR(1, 37, 36); +AccelStepper stepperX(1, 39, 38); +AccelStepper stepperY(1, 41, 40); +AccelStepper stepperZ2(1, 43, 42); +AccelStepper stepperZ1(1, 45, 44); + + +// Stepper speed and accelaration +float stepperMaxSpeed = 20000.0; +float stepper_R_MaxSpeed = 22000.0; +float stepperMaxAccelaration = 1000000.0; + +// Size of steps for stepper motors +const int stepX = 21; // 0.09433962264 mm per step (5*9.6mm*PI/1600) +const int stepY = 500; // 0.09433962264 mm per step (5*9.6mm*PI/1600) +const int stepZ = 120; // 0.1mm per full stap (10*0.01) + +// Size of steps when jogging +const int jogStepY = 1000; +const int jogStepX = 500; +const int jogStepZ = 250; + +// Size of machine in steps. Type long because number of steps > int (2^15) +const long build_piston_width = 11000/stepX; //2000/stepX total width: 14800 +const long build_piston_length = 28000/stepY; // total length 76000 +const long distance_roller_nozzle = 30000; +const long piston_depth = pwdrconfig[3]; // The depth of the part is defined by the preprocessor +const long build_piston_end_stop = 76000; // Absolute end of the machine + +// Variable for positioning +long jogvar = 0; +long jogvar2 = 0; + +void setup(){ + + // Push button + pinMode(0, INPUT); + // LED + pinMode(13, OUTPUT); + // Pull up transistor + pinMode(21, OUTPUT); + // SPI + pinMode(53, OUTPUT); + + // Initilize the ink pins (22 to 33) and stepper pins (36-45) + for (int i=22; i<=45; i++) { + pinMode(i, OUTPUT); + } + + // Start serial communication, baud rate 9600 + Serial.begin(9600); + + // Initialise stepper motors + stepperX.setMaxSpeed(stepperMaxSpeed); + stepperX.setAcceleration(stepperMaxAccelaration); + stepperY.setMaxSpeed(stepperMaxSpeed); + stepperY.setAcceleration(stepperMaxAccelaration); + stepperZ1.setMaxSpeed(stepperMaxSpeed); + stepperZ1.setAcceleration(stepperMaxAccelaration); + stepperZ2.setMaxSpeed(stepperMaxSpeed); + stepperZ2.setAcceleration(stepperMaxAccelaration); + stepperR.setMaxSpeed(stepperMaxSpeed); + stepperR.setAcceleration(stepper_R_MaxSpeed); + // Set the speeed for compactin the powder (- for right direction) + stepperR.setSpeed(stepper_R_MaxSpeed); + + // Return the carriage to 0,-14000 position, first set the Y to -14000 + stepperY.setCurrentPosition(distance_roller_nozzle); + homeXY(); + + if (!SD.begin(chipSelect)) { + Serial.println("initialization SD failed!"); + delay(2000); + return; + } + Serial.println("initialization SD done."); + + Serial.println("Printer ready"); + Serial.println("-- SAFE TO CONNECT POWER --"); +} + +void loop(){ + + if (Serial.available()){ + char serialbutton = Serial.read(); + if (serialbutton == 'p'){ + printFile(); + } else if(serialbutton == 'x'){ + jogX(-jogStepX); + Serial.print("Position X: "); Serial.println(stepperX.currentPosition()); + // Forward x-axis + } else if(serialbutton == 'X'){ + jogX(jogStepX); + Serial.print("Position X: "); Serial.println(stepperX.currentPosition()); + // Backward y-axis + } else if(serialbutton == 'y'){ + jogY(-jogStepY); + Serial.print("Position Y: "); Serial.println(stepperY.currentPosition()); + // Forward y-axis + } else if(serialbutton == 'Y'){ + jogY(jogStepY); + Serial.print("Position Y: "); Serial.println(stepperY.currentPosition()); + // Backward z-axis + } else if(serialbutton == 'z'){ + jogZ(-jogStepZ); + Serial.println("Jog down done"); + // Forward z-axis + } else if(serialbutton == 'Z'){ + jogZ(jogStepY); + Serial.println("Jog bins up done"); + // Home the carriage + } else if(serialbutton == '1'){ + jogZ1(-jogStepZ); + Serial.print("Position Z1: "); Serial.println(stepperZ1.currentPosition()); + } else if(serialbutton == 'q'){ + jogZ1(jogStepZ); + Serial.print("Position Z1: "); Serial.println(stepperZ1.currentPosition()); + } else if(serialbutton == '2'){ + jogZ2(-jogStepZ); + Serial.print("Position Z2: "); Serial.println(stepperZ2.currentPosition()); + } else if(serialbutton == 'w'){ + jogZ2(jogStepZ); + Serial.print("Position Z2: "); Serial.println(stepperZ2.currentPosition()); + } else if(serialbutton == 'h'){ + homeXY(); + } else if(serialbutton == 'r'){ + resetStepperPositions(); + Serial.println("Stepper counters reset"); + // Make a new powder layer + } else if(serialbutton == 'n'){ + newLayer(); + Serial.println("New powder layer deposited"); + } else if(serialbutton == 's'){ + jogY(-distance_roller_nozzle); + jogX(-4000); + resetStepperPositions(); + Serial.println("Nozzle at start position"); + } else if(serialbutton == 'R'){ + stepperR.runToNewPosition(stepperR.currentPosition()+5000); + Serial.println("Roller"); + } else if(serialbutton == 'E'){ + stepperY.runToNewPosition(-build_piston_end_stop+stepY); + Serial.println("Carriage near end of piston"); + } else { + Serial.println("Unknown command"); + } + } + + // Blink the LED to show the Arduino is idle + digitalWrite(13,HIGH); + delay(300); + digitalWrite(13,LOW); + delay(300); +} + + diff --git a/Arduino/PwdrFirmware2_0_mk1/jogController.ino b/Arduino/PwdrFirmware2_0_mk1/jogController.ino new file mode 100644 index 0000000..ca832c1 --- /dev/null +++ b/Arduino/PwdrFirmware2_0_mk1/jogController.ino @@ -0,0 +1,78 @@ +// Jog in X direction +void jogX(long jogDirStep){ + // Define direction, larger than 1 means clockwise + if(jogDirStep>0){ + jogvar = stepperX.currentPosition()+abs(jogDirStep); + } else { + jogvar = stepperX.currentPosition()-abs(jogDirStep); + } + // Check wether it's allowed to take a step + if ((jogvar >= 0) || (jogvar <= build_piston_width)){ + stepperX.runToNewPosition(jogvar); + } else { + Serial.println("jog X impossible"); + } +} + +// Jog in Y direction +void jogY(long jogDirStep){ + if(jogDirStep>0){ + jogvar = stepperY.currentPosition()+abs(jogDirStep); + } else { + jogvar = stepperY.currentPosition()-abs(jogDirStep); + } + if ((jogvar >= 0) || (jogvar <= build_piston_length)){ + stepperY.runToNewPosition(jogvar); + } else { + Serial.println("jog Y impossible"); + } +} + +// Jog of Z1 piston +void jogZ1(long jogDirStep){ + if(jogDirStep>0){ + jogvar = stepperZ1.currentPosition()+abs(jogDirStep); + } else { + jogvar = stepperZ1.currentPosition()-abs(jogDirStep); + } + if ((jogvar >= 0) || (jogvar <= piston_depth)){ + stepperZ1.runToNewPosition(jogvar); + } else { + Serial.println("jog Z1 impossible"); + } +} + +// Jog of Z2 piston +void jogZ2(long jogDirStep){ + if(jogDirStep>0){ + jogvar = stepperZ2.currentPosition()+abs(jogDirStep); + } else { + jogvar = stepperZ2.currentPosition()-abs(jogDirStep); + } + if ((jogvar >= 0) || (jogvar <= piston_depth)){ + stepperZ2.runToNewPosition(jogvar); + } else { + Serial.println("jog Z2 impossible"); + } +} + +// Combined jog in Z direction for both pistons +void jogZ(long jogDirStep){ + if(jogDirStep>0){ + jogvar = stepperZ1.currentPosition()-abs(1.3*jogDirStep); + jogvar2 = stepperZ2.currentPosition()+abs(jogDirStep); + } else { + jogvar = stepperZ1.currentPosition()+abs(1.3*jogDirStep); + jogvar2 = stepperZ2.currentPosition()-abs(jogDirStep); + } + if ((jogvar >= 0) || (jogvar <= piston_depth)){ + stepperZ1.moveTo(jogvar); + stepperZ2.moveTo(jogvar2); + } else { + Serial.println("jog Z2 impossible"); + } + while (stepperZ1.currentPosition() != jogvar || stepperZ2.currentPosition() != jogvar2){ + stepperZ1.run(); + stepperZ2.run(); + } +} diff --git a/Arduino/PwdrFirmware2_0_mk1/printFile.ino b/Arduino/PwdrFirmware2_0_mk1/printFile.ino new file mode 100644 index 0000000..0b858d6 --- /dev/null +++ b/Arduino/PwdrFirmware2_0_mk1/printFile.ino @@ -0,0 +1,125 @@ +void printFile(){ + // Switch on the LED while printing + digitalWrite(13, HIGH); + digitalWrite(21, HIGH); + + // Safety measure, return carriage to 0,0 position + homeXY(); + Serial.println("Print started"); + + // Read config file for print size + dataFile.close(); + dataFile = SD.open("PWDR/PWDRCONF.TXT"); + + if (!dataFile) { + Serial.println("Error while opening printer config, stop and repair."); + while(1); + digitalWrite(21, LOW); + } else { + Serial.println("Reading file printer config"); + } + + int index = 0; + int index2 = 0; + char buffer[5]; + + while (dataFile.available()) { + int temp = dataFile.read(); + // Convert the CSV file in individual int's + if (temp != ','){ + buffer[index++] = temp; + } else { + pwdrconfig[index2] = atoi(buffer); + memset(buffer, 0, sizeof(buffer)); + index = 0; + index2++; + } + } + + int zTemp = 0; + + for (int z=3;z<2*pwdrconfig[2]+1;z++){ + + if (z%2) { + zTemp = (z/2); + } else if ((z%2) == 0){ + zTemp = (z/2)-1; + } + + // Use layer numer in file name + char filename[] = "PWDR/PWDR0000.DAT"; + // Add leading zeros + filename[12] += char(zTemp%10); + if (zTemp >= 10){ + filename[11] += char((zTemp/10)%10); + } if (zTemp >= 100){ + filename[10] += char((zTemp/100)%10); + } if (zTemp >= 1000){ + filename[9] += char((zTemp/1000)%10); + } + + // Increase saturation for first 4 layers + if (zTemp < 4){ + saturation = 1.5 * pwdrconfig[3]; + } else { + saturation = pwdrconfig[3]; + } + + // Always start with closing a file, inside the Z-loop + dataFile.close(); + dataFile = SD.open(filename); + + if (!dataFile) { + Serial.print("Error while opening "); Serial.println(filename); + } else { + Serial.print("Reading file "); Serial.println(filename); + } + + for (long y=1; y<=pwdrconfig[1]; y++){ + for (long x=1; x<=pwdrconfig[0]; x++){ + + // If the button on the protoshield is pushed, the printing process is aborted. + if (analogRead(0) == 0){ + abortPrint(); + } else { + + // Move steps in X direction, reverse direction from left to right + // when the Y position is even. Meanwhile, read the SD file for printdata + if(y % 2){ + stepperX.runToNewPosition(stepperX.currentPosition()-stepX); + // All but first stap of right-left Y, move 2 bytes to the left + lower = dataFile.read(); + upper = dataFile.read(); + } else if ((y % 2) == 0) { // Prevent mis-step + // Normal left-right Y + lower = dataFile.read(); + upper = dataFile.read(); + stepperX.runToNewPosition(stepperX.currentPosition()+stepX); + } + // Fire the nozzles, as many times as prescribed + if (lower != 0 && upper !=0){ + for (int i=0; i + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Frames for Sheet and Layout</b> + + + + + + + + + + + + + + + + + + + + + + + +>DRAWING_NAME +>LAST_DATE_TIME +>SHEET +Sheet: + + + + + +<b>FRAME</b><p> +DIN A3, landscape with location and doc. field + + + + + + + + + + + + + + +<b>Resistors, Capacitors, Inductors</b><p> +Based on the previous libraries: +<ul> +<li>r.lbr +<li>cap.lbr +<li>cap-fe.lbr +<li>captant.lbr +<li>polcap.lbr +<li>ipc-smd.lbr +</ul> +All SMD packages are defined according to the IPC specifications and CECC<p> +<author>Created by librarian@cadsoft.de</author><p> +<p> +for Electrolyt Capacitors see also :<p> +www.bccomponents.com <p> +www.panasonic.com<p> +www.kemet.com<p> +http://www.secc.co.jp/pdf/os_e/2004/e_os_all.pdf <b>(SANYO)</b> +<p> +for trimmer refence see : <u>www.electrospec-inc.com/cross_references/trimpotcrossref.asp</u><p> + +<table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0> +<tr valign="top"> + +<! <td width="10">&nbsp;</td> +<td width="90%"> + +<b><font color="#0000FF" size="4">TRIM-POT CROSS REFERENCE</font></b> +<P> +<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2> + <TR> + <TD COLSPAN=8> + <FONT SIZE=3 FACE=ARIAL><B>RECTANGULAR MULTI-TURN</B></FONT> + </TD> + </TR> + <TR> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">BOURNS</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">BI&nbsp;TECH</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">DALE-VISHAY</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">PHILIPS/MEPCO</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">MURATA</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">PANASONIC</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">SPECTROL</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">MILSPEC</FONT> + </B> + </TD><TD>&nbsp;</TD> + </TR> + <TR> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3 > + 3005P<BR> + 3006P<BR> + 3006W<BR> + 3006Y<BR> + 3009P<BR> + 3009W<BR> + 3009Y<BR> + 3057J<BR> + 3057L<BR> + 3057P<BR> + 3057Y<BR> + 3059J<BR> + 3059L<BR> + 3059P<BR> + 3059Y<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + 89P<BR> + 89W<BR> + 89X<BR> + 89PH<BR> + 76P<BR> + 89XH<BR> + 78SLT<BR> + 78L&nbsp;ALT<BR> + 56P&nbsp;ALT<BR> + 78P&nbsp;ALT<BR> + T8S<BR> + 78L<BR> + 56P<BR> + 78P<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + T18/784<BR> + 783<BR> + 781<BR> + -<BR> + -<BR> + -<BR> + 2199<BR> + 1697/1897<BR> + 1680/1880<BR> + 2187<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + 8035EKP/CT20/RJ-20P<BR> + -<BR> + RJ-20X<BR> + -<BR> + -<BR> + -<BR> + 1211L<BR> + 8012EKQ&nbsp;ALT<BR> + 8012EKR&nbsp;ALT<BR> + 1211P<BR> + 8012EKJ<BR> + 8012EKL<BR> + 8012EKQ<BR> + 8012EKR<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + 2101P<BR> + 2101W<BR> + 2101Y<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 2102L<BR> + 2102S<BR> + 2102Y<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + EVMCOG<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + 43P<BR> + 43W<BR> + 43Y<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 40L<BR> + 40P<BR> + 40Y<BR> + 70Y-T602<BR> + 70L<BR> + 70P<BR> + 70Y<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + RT/RTR12<BR> + RT/RTR12<BR> + RT/RTR12<BR> + -<BR> + RJ/RJR12<BR> + RJ/RJR12<BR> + RJ/RJR12<BR></FONT> + </TD> + </TR> + <TR> + <TD COLSPAN=8>&nbsp; + </TD> + </TR> + <TR> + <TD COLSPAN=8> + <FONT SIZE=4 FACE=ARIAL><B>SQUARE MULTI-TURN</B></FONT> + </TD> + </TR> + <TR> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT> + </TD> + </TR> + <TR> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 3250L<BR> + 3250P<BR> + 3250W<BR> + 3250X<BR> + 3252P<BR> + 3252W<BR> + 3252X<BR> + 3260P<BR> + 3260W<BR> + 3260X<BR> + 3262P<BR> + 3262W<BR> + 3262X<BR> + 3266P<BR> + 3266W<BR> + 3266X<BR> + 3290H<BR> + 3290P<BR> + 3290W<BR> + 3292P<BR> + 3292W<BR> + 3292X<BR> + 3296P<BR> + 3296W<BR> + 3296X<BR> + 3296Y<BR> + 3296Z<BR> + 3299P<BR> + 3299W<BR> + 3299X<BR> + 3299Y<BR> + 3299Z<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + 66P&nbsp;ALT<BR> + 66W&nbsp;ALT<BR> + 66X&nbsp;ALT<BR> + 66P&nbsp;ALT<BR> + 66W&nbsp;ALT<BR> + 66X&nbsp;ALT<BR> + -<BR> + 64W&nbsp;ALT<BR> + -<BR> + 64P&nbsp;ALT<BR> + 64W&nbsp;ALT<BR> + 64X&nbsp;ALT<BR> + 64P<BR> + 64W<BR> + 64X<BR> + 66X&nbsp;ALT<BR> + 66P&nbsp;ALT<BR> + 66W&nbsp;ALT<BR> + 66P<BR> + 66W<BR> + 66X<BR> + 67P<BR> + 67W<BR> + 67X<BR> + 67Y<BR> + 67Z<BR> + 68P<BR> + 68W<BR> + 68X<BR> + 67Y&nbsp;ALT<BR> + 67Z&nbsp;ALT<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 5050<BR> + 5091<BR> + 5080<BR> + 5087<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + T63YB<BR> + T63XB<BR> + -<BR> + -<BR> + -<BR> + 5887<BR> + 5891<BR> + 5880<BR> + -<BR> + -<BR> + -<BR> + T93Z<BR> + T93YA<BR> + T93XA<BR> + T93YB<BR> + T93XB<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 8026EKP<BR> + 8026EKW<BR> + 8026EKM<BR> + 8026EKP<BR> + 8026EKB<BR> + 8026EKM<BR> + 1309X<BR> + 1309P<BR> + 1309W<BR> + 8024EKP<BR> + 8024EKW<BR> + 8024EKN<BR> + RJ-9P/CT9P<BR> + RJ-9W<BR> + RJ-9X<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 3103P<BR> + 3103Y<BR> + 3103Z<BR> + 3103P<BR> + 3103Y<BR> + 3103Z<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 3105P/3106P<BR> + 3105W/3106W<BR> + 3105X/3106X<BR> + 3105Y/3106Y<BR> + 3105Z/3105Z<BR> + 3102P<BR> + 3102W<BR> + 3102X<BR> + 3102Y<BR> + 3102Z<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + EVMCBG<BR> + EVMCCG<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 55-1-X<BR> + 55-4-X<BR> + 55-3-X<BR> + 55-2-X<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 50-2-X<BR> + 50-4-X<BR> + 50-3-X<BR> + -<BR> + -<BR> + -<BR> + 64P<BR> + 64W<BR> + 64X<BR> + 64Y<BR> + 64Z<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + RT/RTR22<BR> + RT/RTR22<BR> + RT/RTR22<BR> + RT/RTR22<BR> + RJ/RJR22<BR> + RJ/RJR22<BR> + RJ/RJR22<BR> + RT/RTR26<BR> + RT/RTR26<BR> + RT/RTR26<BR> + RJ/RJR26<BR> + RJ/RJR26<BR> + RJ/RJR26<BR> + RJ/RJR26<BR> + RJ/RJR26<BR> + RJ/RJR26<BR> + RT/RTR24<BR> + RT/RTR24<BR> + RT/RTR24<BR> + RJ/RJR24<BR> + RJ/RJR24<BR> + RJ/RJR24<BR> + RJ/RJR24<BR> + RJ/RJR24<BR> + RJ/RJR24<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + </TR> + <TR> + <TD COLSPAN=8>&nbsp; + </TD> + </TR> + <TR> + <TD COLSPAN=8> + <FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT> + </TD> + </TR> + <TR> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT> + </TD> + </TR> + <TR> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 3323P<BR> + 3323S<BR> + 3323W<BR> + 3329H<BR> + 3329P<BR> + 3329W<BR> + 3339H<BR> + 3339P<BR> + 3339W<BR> + 3352E<BR> + 3352H<BR> + 3352K<BR> + 3352P<BR> + 3352T<BR> + 3352V<BR> + 3352W<BR> + 3362H<BR> + 3362M<BR> + 3362P<BR> + 3362R<BR> + 3362S<BR> + 3362U<BR> + 3362W<BR> + 3362X<BR> + 3386B<BR> + 3386C<BR> + 3386F<BR> + 3386H<BR> + 3386K<BR> + 3386M<BR> + 3386P<BR> + 3386S<BR> + 3386W<BR> + 3386X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 25P<BR> + 25S<BR> + 25RX<BR> + 82P<BR> + 82M<BR> + 82PA<BR> + -<BR> + -<BR> + -<BR> + 91E<BR> + 91X<BR> + 91T<BR> + 91B<BR> + 91A<BR> + 91V<BR> + 91W<BR> + 25W<BR> + 25V<BR> + 25P<BR> + -<BR> + 25S<BR> + 25U<BR> + 25RX<BR> + 25X<BR> + 72XW<BR> + 72XL<BR> + 72PM<BR> + 72RX<BR> + -<BR> + 72PX<BR> + 72P<BR> + 72RXW<BR> + 72RXL<BR> + 72X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + T7YB<BR> + T7YA<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + TXD<BR> + TYA<BR> + TYP<BR> + -<BR> + TYD<BR> + TX<BR> + -<BR> + 150SX<BR> + 100SX<BR> + 102T<BR> + 101S<BR> + 190T<BR> + 150TX<BR> + 101<BR> + -<BR> + -<BR> + 101SX<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + ET6P<BR> + ET6S<BR> + ET6X<BR> + RJ-6W/8014EMW<BR> + RJ-6P/8014EMP<BR> + RJ-6X/8014EMX<BR> + TM7W<BR> + TM7P<BR> + TM7X<BR> + -<BR> + 8017SMS<BR> + -<BR> + 8017SMB<BR> + 8017SMA<BR> + -<BR> + -<BR> + CT-6W<BR> + CT-6H<BR> + CT-6P<BR> + CT-6R<BR> + -<BR> + CT-6V<BR> + CT-6X<BR> + -<BR> + -<BR> + 8038EKV<BR> + -<BR> + 8038EKX<BR> + -<BR> + -<BR> + 8038EKP<BR> + 8038EKZ<BR> + 8038EKW<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + 3321H<BR> + 3321P<BR> + 3321N<BR> + 1102H<BR> + 1102P<BR> + 1102T<BR> + RVA0911V304A<BR> + -<BR> + RVA0911H413A<BR> + RVG0707V100A<BR> + RVA0607V(H)306A<BR> + RVA1214H213A<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 3104B<BR> + 3104C<BR> + 3104F<BR> + 3104H<BR> + -<BR> + 3104M<BR> + 3104P<BR> + 3104S<BR> + 3104W<BR> + 3104X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + EVMQ0G<BR> + EVMQIG<BR> + EVMQ3G<BR> + EVMS0G<BR> + EVMQ0G<BR> + EVMG0G<BR> + -<BR> + -<BR> + -<BR> + EVMK4GA00B<BR> + EVM30GA00B<BR> + EVMK0GA00B<BR> + EVM38GA00B<BR> + EVMB6<BR> + EVLQ0<BR> + -<BR> + EVMMSG<BR> + EVMMBG<BR> + EVMMAG<BR> + -<BR> + -<BR> + EVMMCS<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + EVMM1<BR> + -<BR> + -<BR> + EVMM0<BR> + -<BR> + -<BR> + EVMM3<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + 62-3-1<BR> + 62-1-2<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 67R<BR> + -<BR> + 67P<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 67X<BR> + 63V<BR> + 63S<BR> + 63M<BR> + -<BR> + -<BR> + 63H<BR> + 63P<BR> + -<BR> + -<BR> + 63X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + RJ/RJR50<BR> + RJ/RJR50<BR> + RJ/RJR50<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + </TR> +</TABLE> +<P>&nbsp;<P> +<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3> + <TR> + <TD COLSPAN=7> + <FONT color="#0000FF" SIZE=4 FACE=ARIAL><B>SMD TRIM-POT CROSS REFERENCE</B></FONT> + <P> + <FONT SIZE=4 FACE=ARIAL><B>MULTI-TURN</B></FONT> + </TD> + </TR> + <TR> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT> + </TD> + </TR> + <TR> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 3224G<BR> + 3224J<BR> + 3224W<BR> + 3269P<BR> + 3269W<BR> + 3269X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 44G<BR> + 44J<BR> + 44W<BR> + 84P<BR> + 84W<BR> + 84X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + ST63Z<BR> + ST63Y<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + ST5P<BR> + ST5W<BR> + ST5X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + </TR> + <TR> + <TD COLSPAN=7>&nbsp; + </TD> + </TR> + <TR> + <TD COLSPAN=7> + <FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT> + </TD> + </TR> + <TR> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT> + </TD> + </TR> + <TR> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 3314G<BR> + 3314J<BR> + 3364A/B<BR> + 3364C/D<BR> + 3364W/X<BR> + 3313G<BR> + 3313J<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 23B<BR> + 23A<BR> + 21X<BR> + 21W<BR> + -<BR> + 22B<BR> + 22A<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + ST5YL/ST53YL<BR> + ST5YJ/5T53YJ<BR> + ST-23A<BR> + ST-22B<BR> + ST-22<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + ST-4B<BR> + ST-4A<BR> + -<BR> + -<BR> + -<BR> + ST-3B<BR> + ST-3A<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + EVM-6YS<BR> + EVM-1E<BR> + EVM-1G<BR> + EVM-1D<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + G4B<BR> + G4A<BR> + TR04-3S1<BR> + TRG04-2S1<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + DVR-43A<BR> + CVR-42C<BR> + CVR-42A/C<BR> + -<BR> + -<BR></FONT> + </TD> + </TR> +</TABLE> +<P> +<FONT SIZE=4 FACE=ARIAL><B>ALT =&nbsp;ALTERNATE</B></FONT> +<P> + +&nbsp; +<P> +</td> +</tr> +</table> + + +<b>RESISTOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b> wave soldering<p> + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +wave soldering + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +wave soldering + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b> + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +wave soldering + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +wave soldering + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +wave soldering + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +wave soldering + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +wave soldering + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +wave soldering + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b> wave soldering<p> +Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +MELF 0.10 W + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +MELF 0.25 W + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +MELF 0.12 W + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +MELF 0.10 W + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +MELF 0.25 W + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +MELF 0.25 W + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +MELF 0.12 W + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +MELF 0.25 W + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +type 0204, grid 5 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0204, grid 7.5 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0204, grid 2.5 mm + + + + + + +>NAME +>VALUE + + +<b>RESISTOR</b><p> +type 0207, grid 10 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0207, grid 12 mm + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>RESISTOR</b><p> +type 0207, grid 15mm + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>RESISTOR</b><p> +type 0207, grid 2.5 mm + + + + + + + +>NAME +>VALUE + + +<b>RESISTOR</b><p> +type 0207, grid 5 mm + + + + + + + +>NAME +>VALUE + + +<b>RESISTOR</b><p> +type 0207, grid 7.5 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0309, grid 10mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0309, grid 12.5 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0309, grid 2.5 mm + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +type 0411, grid 12.5 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0411, grid 15 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0411, grid 3.81 mm + + + + + + +>NAME +>VALUE + + + +<b>RESISTOR</b><p> +type 0414, grid 15 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0414, grid 5 mm + + + + + + +>NAME +>VALUE + + + +<b>RESISTOR</b><p> +type 0617, grid 17.5 mm + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0617, grid 22.5 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0617, grid 5 mm + + + + + + +>NAME +>VALUE + + + +<b>RESISTOR</b><p> +type 0922, grid 22.5 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>RESISTOR</b><p> +type 0613, grid 5 mm + + + + + + +>NAME +>VALUE + + + +<b>RESISTOR</b><p> +type 0613, grid 15 mm + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0817, grid 22.5 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +0817 + + + + +<b>RESISTOR</b><p> +type 0817, grid 6.35 mm + + + + + + +>NAME +>VALUE +0817 + + + +<b>RESISTOR</b><p> +type V234, grid 12.5 mm + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type V235, grid 17.78 mm + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type V526-0, grid 2.5 mm + + + + + + + + + + +>NAME +>VALUE + + +<b>CECC Size RC2211</b> Reflow Soldering<p> +source Beyschlag + + + + + + +>NAME +>VALUE + + +<b>CECC Size RC2211</b> Wave Soldering<p> +source Beyschlag + + + + + + +>NAME +>VALUE + + +<b>CECC Size RC3715</b> Reflow Soldering<p> +source Beyschlag + + + + + + + + +>NAME +>VALUE + + +<b>CECC Size RC3715</b> Wave Soldering<p> +source Beyschlag + + + + + + + + +>NAME +>VALUE + + +<b>CECC Size RC6123</b> Reflow Soldering<p> +source Beyschlag + + + + + + + + +>NAME +>VALUE + + +<b>CECC Size RC6123</b> Wave Soldering<p> +source Beyschlag + + + + + + + + +>NAME +>VALUE + + +<b>RESISTOR</b><p> +type 0922, grid 7.5 mm + + + + + + +>NAME +>VALUE +0922 + + + +<b>RESISTOR</b><p> +type RDH, grid 15 mm + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +RDH + + + + +<b>Mini MELF 0102 Axial</b> + + + + +>NAME +>VALUE + + + +<b>RESISTOR</b> chip<p> +Source: http://www.vishay.com/docs/20008/dcrcw.pdf + + +>NAME +>VALUE + + + + + +<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p> +MIL SIZE RBR52<br> +Source: VISHAY .. vta56.pdf + + + + + + + + + + +>NAME +>VALUE + + + + +<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p> +MIL SIZE RBR53<br> +Source: VISHAY .. vta56.pdf + + + + + + + + + + +>NAME +>VALUE + + + + +<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p> +MIL SIZE RBR54<br> +Source: VISHAY .. vta56.pdf + + + + + + + + + + +>NAME +>VALUE + + + + +<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p> +MIL SIZE RBR55<br> +Source: VISHAY .. vta56.pdf + + + + + + + + + + +>NAME +>VALUE + + + + +<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p> +MIL SIZE RBR56<br> +Source: VISHAY .. vta56.pdf + + + + + + + + + + +>NAME +>VALUE + + + + +<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p> +MIL SIZE RNC55<br> +Source: VISHAY .. vta56.pdf + + + + + + + + +>NAME +>VALUE + + + + +<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p> +MIL SIZE RNC60<br> +Source: VISHAY .. vta56.pdf + + + + + + + + +>NAME +>VALUE + + + + +<b>Package 4527</b><p> +Source: http://www.vishay.com/docs/31059/wsrhigh.pdf + + + + + + +>NAME +>VALUE + + +<b>Wirewound Resistors, Precision Power</b><p> +Source: VISHAY wscwsn.pdf + + + + + + + + + + +>NAME +>VALUE + + +<b>Wirewound Resistors, Precision Power</b><p> +Source: VISHAY wscwsn.pdf + + + + + + +>NAME +>VALUE + + +<b>Wirewound Resistors, Precision Power</b><p> +Source: VISHAY wscwsn.pdf + + + + + + + + + + +>NAME +>VALUE + + +<b>Wirewound Resistors, Precision Power</b><p> +Source: VISHAY wscwsn.pdf + + + + + + + + + + +>NAME +>VALUE + + +<b>Wirewound Resistors, Precision Power</b><p> +Source: VISHAY wscwsn.pdf + + + + + + +>NAME +>VALUE + + +<b>Wirewound Resistors, Precision Power</b><p> +Source: VISHAY wscwsn.pdf + + + + + + +>NAME +>VALUE + + +<b>CRCW1218 Thick Film, Rectangular Chip Resistors</b><p> +Source: http://www.vishay.com .. dcrcw.pdf + + + + +>NAME +>VALUE + + + + +<b>Chip Monolithic Ceramic Capacitors</b> Medium Voltage High Capacitance for General Use<p> +Source: http://www.murata.com .. GRM43DR72E224KW01.pdf + + + + + + +>NAME +>VALUE + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +grid 2.5 mm, outline 2.4 x 4.4 mm + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 mm, outline 2.5 x 5 mm + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 mm, outline 3 x 5 mm + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 mm, outline 4 x 5 mm + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 mm, outline 5 x 5 mm + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 mm, outline 6 x 5 mm + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 mm + 5 mm, outline 2.4 x 7 mm + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 + 5 mm, outline 2.5 x 7.5 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 + 5 mm, outline 3.5 x 7.5 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 + 5 mm, outline 4.5 x 7.5 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 + 5 mm, outline 5.5 x 7.5 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 2.4 x 4.4 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 2.5 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 4.5 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 3 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 5 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 5.5 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 7.5 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +Horizontal, grid 5 mm, outline 7.5 x 7.5 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>CAPACITOR</b><p> +grid 7.5 mm, outline 3.2 x 10.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 7.5 mm, outline 4.2 x 10.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 7.5 mm, outline 5.2 x 10.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 10.2 mm, outline 4.3 x 13.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 10.2 mm, outline 5.4 x 13.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 10.2 mm, outline 6.4 x 13.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 15 mm, outline 5.4 x 18.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 15 mm, outline 6.4 x 18.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 15 mm, outline 7.2 x 18.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 15 mm, outline 8.4 x 18.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 15 mm, outline 9.1 x 18.2 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 22.5 mm, outline 6.2 x 26.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 22.5 mm, outline 7.4 x 26.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 22.5 mm, outline 8.7 x 26.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 22.5 mm, outline 10.8 x 26.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 22.5 mm, outline 11.3 x 26.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 27.5 mm, outline 9.3 x 31.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 27.5 mm, outline 11.3 x 31.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 27.5 mm, outline 13.4 x 31.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 27.5 mm, outline 20.5 x 31.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 32.5 mm, outline 13.7 x 37.4 mm + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 32.5 mm, outline 16.2 x 37.4 mm + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 32.5 mm, outline 18.2 x 37.4 mm + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 37.5 mm, outline 19.2 x 41.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 37.5 mm, outline 20.3 x 41.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 3.5 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 37.5 mm, outline 15.5 x 41.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 7.5 mm, outline 6.3 x 10.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 27.5 mm, outline 15.4 x 31.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 27.5 mm, outline 17.3 x 31.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Ceramic Chip Capacitor KEMET 0204 reflow solder</b><p> +Metric Code Size 1005 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 0603 reflow solder</b><p> +Metric Code Size 1608 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 0805 reflow solder</b><p> +Metric Code Size 2012 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 1206 reflow solder</b><p> +Metric Code Size 3216 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 1210 reflow solder</b><p> +Metric Code Size 3225 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 1812 reflow solder</b><p> +Metric Code Size 4532 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 1825 reflow solder</b><p> +Metric Code Size 4564 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 2220 reflow solder</b><p>Metric Code Size 5650 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 2225 reflow solder</b><p>Metric Code Size 5664 + + + + +>NAME +>VALUE + + + + +<b> </b><p> +Source: http://www.vishay.com/docs/10129/hpc0201a.pdf + + +>NAME +>VALUE + + + +Source: http://www.avxcorp.com/docs/catalogs/cx5r.pdf + + +>NAME +>VALUE + + + + + + +<b>CAPACITOR</b><p> +Source: AVX .. aphvc.pdf + + + + +>NAME +>VALUE + + + + +<b>CAPACITOR</b><p> +Source: AVX .. aphvc.pdf + + + + +>NAME +>VALUE + + + + +<b>TANTALUM CAPACITOR</b> + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>TANTALUM CAPACITOR</b> + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>TANTALUM CAPACITOR</b> + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>TANTALUM CAPACITOR</b> + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +body 5 x 5 mm, rectangle, grid 2.54 mm + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +body 7.6 x 5 mm, rectangle, grid 5.08 mm + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +body 12.7 x 7.6 mm, rectangle, grid 10.16 mm + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +body 12.5 x 12.5 mm, rectangle, grid 10.16 mm + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 4 mm, grid 2.54 mm + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 4 mm, grid 2.54 mm + + + + + + + + + + + + + + + + + +>NAME +>VALUE +TT + + + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 5 mm, grid 2.54 mm + + + + + + + + + + + + +>NAME +>VALUE +TT + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 6 mm, grid 2.54 mm + + + + + + + + + + + + +>NAME +>VALUE +TT + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 6 mm, grid 2.54 mm + + + + + + + + + + + + + + + + + +>NAME +>VALUE +TT + + + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 7 mm, grid 2.54 mm + + + + + + + + + + + + + + + + + +>NAME +>VALUE +TT + + + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 7 mm, grid 2.54 mm + + + + + + + + + + + + +>NAME +>VALUE +TT + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 10 mm, grid 5.08 mm + + + + + + + + + + + + +>NAME +>VALUE +TT + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 11 mm, grid 5.08 mm + + + + + + + + + + + + +>NAME +>VALUE +TT + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 11 mm, grid 5.08 mm + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +TT + + + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 6 mm, grid 5.08 mm + + + + + + + + + + + + + + + +>NAME +>VALUE +TT + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 6 mm, grid 5.08 mm + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +TT + + + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 7 mm, grid 5.08 mm + + + + + + + + + + + + +>NAME +>VALUE +TT + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 7 mm, grid 5.08 mm + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +TT + + + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 9 mm, grid 5.08 mm + + + + + + + + + + + + +>NAME +>VALUE +TT + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 9 mm, grid 5.08 mm + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +TT + + + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +rectangle, grid 2.54 mm + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +rectangle, grid 5.08 mm + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +rectangle, grid 5.08 mm + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +rectangle, grid 10.16 mm + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +rectangle, grid 10.16 mm + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 4.5 mm, grid 5.08 mm + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +TT + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 5.0 mm, grid 5.08 mm + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +TT + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 7.0 mm, grid 5.08 mm + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +TT + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 6.0 mm, grid 5.08 mm + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +TT + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 8.0 mm, grid 5.08 mm + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +TT + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 1.8 mm, diameter 4 mm + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 15.24 mm, diameter 5 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 15.24 mm, diameter 6 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 15.24 mm, diameter 9 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 2.54 mm, diameter 4 mm + + + + + + + + +>NAME +>VALUE + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 2.54 mm, diameter 5 mm + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 2.54 mm, diameter 6 mm + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 2.54 mm, diameter 7 mm + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 2.54 mm, diameter 4 mm, + + + + + + + + +>NAME +>VALUE + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 2 mm, diameter 4 mm + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 2.032 mm, diameter 5 mm + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 22.86 mm, diameter 10 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 22.86 mm, diameter 6 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 22.86 mm, diameter 9 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 3.5 mm, diameter 10 mm + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 25.4 mm, diameter 10 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 25.4 mm, diameter 9 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 3.5 mm, diameter 8 mm + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 30.48 mm, diameter 10 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 30.48 mm, diameter 12 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 30.48 mm, diameter 16 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 35.56 mm, diameter 12 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 30.48 mm, diameter 14 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 30.48 mm, diameter 16 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 30.48 mm, diameter 18 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 45.72 mm, diameter 16 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 45.72 mm, diameter 18 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 45.72 mm, diameter 21 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 45.72 mm, diameter 22 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 45.72 mm, diameter 25 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 5.08 mm, diameter 10.5 mm + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 5.08 mm, diameter 13 mm + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 5.05 mm, diameter 4 mm + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 5.08 mm, diameter 5 mm + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 5.08 mm, diameter 6 mm + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 5.08 mm, diameter 8.5 mm + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 50 mm, diameter 25 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 50 mm, diameter 30 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 55 mm, diameter 25 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 55 mm, diameter 30 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 5.08 mm, diameter 9 mm + + + + + + + + + +>NAME +>VALUE + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 7.62 mm, diameter 16 mm + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 7.62 mm, diameter 18 mm + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 10.16 mm, diameter 20 mm + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 10.16 mm, diameter 22.5 mm + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 10.16 mm, diameter 25 mm + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 10.16 mm, diameter 30 mm + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 10.16 mm, diameter 35 mm + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>Aluminum electrolytic capacitors</b> reflow soldering<p> +SMD (Chip) Standard 085 CS<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>Aluminum electrolytic capacitors</b> wave soldering<p> +SMD (Chip) Standard 085 CS<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>Aluminum electrolytic capacitors</b> reflow soldering<p> +SMD (Chip) Standard 085 CS<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>Aluminum electrolytic capacitors</b> wave soldering<p> +SMD (Chip) Standard 085 CS<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>Aluminum electrolytic capacitors</b> reflow soldering<p> +SMD (Chip) Long Life 139 CLL<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>Aluminum electrolytic capacitors</b> wave soldering<p> +SMD (Chip) Long Life 139 CLL<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>Aluminum electrolytic capacitors</b> reflow soldering<p> +SMD (Chip) Long Life 139 CLL<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>Aluminum electrolytic capacitors</b> wave soldering<p> +SMD (Chip) Long Life 139 CLL<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>Aluminum electrolytic capacitors SMD (Chip)</b><p> +Long life base plate, High temperature 140 CLH<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Aluminum electrolytic capacitors SMD (Chip)</b><p> +Long life base plate, High temperature 140 CLH<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Aluminum electrolytic capacitors SMD (Chip)</b><p> +Long life base plate, High temperature 140 CLH<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Aluminum electrolytic capacitors SMD (Chip)</b><p> +Long life base plate, very low impedance 150 CLZ<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Aluminum electrolytic capacitors SMD (Chip)</b><p> +Long life base plate, very low impedance 150 CLZ<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Aluminum electrolytic capacitors SMD (Chip)</b><p> +Long life base plate, very low impedance 150 CLZ<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Aluminum electrolytic capacitors</b><p> +SMD (Chip) Long Life Vertical 153 CLV<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Aluminum electrolytic capacitors</b><p> +SMD (Chip) Long Life Vertical 153 CLV<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Aluminum electrolytic capacitors</b><p> +SMD (Chip) Long Life Vertical 153 CLV<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Aluminum electrolytic capacitors</b><p> +SMD (Chip) Long Life Vertical 153 CLV<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Aluminum electrolytic capacitors</b><p> +SMD (Chip) Long Life Vertical 153 CLV<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Aluminum electrolytic capacitors</b><p> +SMD (Chip) Long Life Vertical 153 CLV<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Aluminum electrolytic capacitors</b><p> +SMD (Chip) Long Life Vertical 153 CLV<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Aluminum electrolytic capacitors</b><p> +SMD (Chip) Long Life Vertical 153 CLV<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Aluminum electrolytic capacitors</b><p> +High Temperature solid electrolytic SMD 175 TMP<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Aluminum electrolytic capacitors</b><p> +High Temperature solid electrolytic SMD 175 TMP<p> +http://www.bccomponents.com/ + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Chip Capacitor Type KEMET A / EIA 3216-18 reflow solder</b><p>KEMET S / EIA 3216-12 + + + + + + +>NAME +>VALUE + + + + + +<b>Chip Capacitor Type KEMET A / EIA 3216-18 Wave solder</b><p> +KEMET S / EIA 3216-12 + + + + + + +>NAME +>VALUE + + + + + +<b>Chip Capacitor Type KEMET B / EIA 3528-21 reflow solder</b><p>KEMET T / EIA 3528-12 + + + + + + +>NAME +>VALUE + + + + + +<b>Chip Capacitor Type KEMET B / EIA 3528-21 Wave solder</b><p> +KEMET T / EIA 3528-12 + + + + + + +>NAME +>VALUE + + + + + +<b>Chip Capacitor Type KEMET C / EIA 6032-28 reflow solder</b><p>KEMET U / EIA 6032-15 + + + + + + +>NAME +>VALUE + + + + + +<b>Chip Capacitor Type KEMET C / EIA 6032-28 Wafe solder</b><p> +KEMET U / EIA 6032-15 + + + + + + +>NAME +>VALUE + + + + + +<b>Chip Capacitor Type KEMET D / EIA 7343-21</b><p>KEMET V / EIA 7343-20, KEMET X / EIA 7343-43 reflow solder + + + + + + +>NAME +>VALUE + + + + + +<b>Chip Capacitor Type KEMET D / EIA 7343-21</b><p> +KEMET V / EIA 7343-20, KEMET X / EIA 7343-43 Wafe solder + + + + + + +>NAME +>VALUE + + + + + +<b>Chip Capacitor Type KEMET E / EIA 7260-38 reflow solder</b> + + + + + + +>NAME +>VALUE + + + + + +<b>Chip Capacitor Type KEMET E / EIA 7260-38 Wafe solder</b> + + + + + + +>NAME +>VALUE + + + + + +<b>Chip Capacitor Type KEMET R/EIA 2012-12 reflow solder</b> + + + + + + +>NAME +>VALUE + + + + + +<b>Chip Capacitor Type KEMET R/EIA 2012-12 Wafe solder</b> + + + + + + +>NAME +>VALUE + + + + + +<b>Panasonic Aluminium Electrolytic Capacitor VS-Serie Package A</b> + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + +<b>Panasonic Aluminium Electrolytic Capacitor VS-Serie Package B</b> + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + +<b>Panasonic Aluminium Electrolytic Capacitor VS-Serie Package C</b> + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + +<b>Panasonic Aluminium Electrolytic Capacitor VS-Serie Package D</b> + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + +<b>Panasonic Aluminium Electrolytic Capacitor VS-Serie Package E</b> + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + +<b>Panasonic Aluminium Electrolytic Capacitor VS-Serie Package F</b> + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + +<b>Panasonic Aluminium Electrolytic Capacitor VS-Serie Package G</b> + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +diameter 5 mm, grid 2.54 mm + + + + + + + + + + + + + + + + + +>NAME +>VALUE +TT + + + + + + + +<b>ELECTROLYTIC CAPACITOR</b><p> +grid 2.54 mm, diameter 6 mm + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>Chip Capacitor </b> Polar tantalum capacitors with solid electrolyte<p> +Siemens Matsushita Components B 45 194, B 45 197, B 45 198<br> +Source: www.farnell.com/datasheets/247.pdf + + + + + + +>NAME +>VALUE + + + + + +<b>Chip Capacitor</b> Polar tantalum capacitors with solid electrolyte<p> +Siemens Matsushita Components B 45 194<br> +Source: www.farnell.com/datasheets/247.pdf + + + + + + +>NAME +>VALUE + + + + + +<b>Chip Capacitor</b> Polar tantalum capacitors with solid electrolyte<p> +Siemens Matsushita Components B 45 194<br> +Source: www.farnell.com/datasheets/247.pdf + + + + + + +>NAME +>VALUE + + + + + +<b>Chip Capacitor </b> Polar tantalum capacitors with solid electrolyte<p> +Siemens Matsushita Components B 45 194, B 45 197, B 45 198<br> +Source: www.farnell.com/datasheets/247.pdf + + + + + + +>NAME +>VALUE + + + + + +<b>Chip Capacitor </b> Polar tantalum capacitors with solid electrolyte<p> +Siemens Matsushita Components B 45 194, B 45 197, B 45 198<br> +Source: www.farnell.com/datasheets/247.pdf + + + + + + +>NAME +>VALUE + + + + + +<b>Chip Capacitor </b> Polar tantalum capacitors with solid electrolyte<p> +Siemens Matsushita Components B 45 194, B 45 197, B 45 198<br> +Source: www.farnell.com/datasheets/247.pdf + + + + + + +>NAME +>VALUE + + + + + +<b>Chip Capacitor </b> Polar tantalum capacitors with solid electrolyte<p> +Siemens Matsushita Components B 45 194, B 45 197, B 45 198<br> +Source: www.farnell.com/datasheets/247.pdf + + + + + + +>NAME +>VALUE + + + + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + + +>NAME +>VALUE + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + + +>NAME +>VALUE + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + + +>NAME +>VALUE + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + + +>NAME +>VALUE + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + + +>NAME +>VALUE + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + + +>NAME +>VALUE + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + + +>NAME +>VALUE + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + + +>NAME +>VALUE + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + +>NAME +>VALUE + + + + + + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + + +>NAME +>VALUE + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + + +>NAME +>VALUE + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + + +>NAME +>VALUE + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + + +>NAME +>VALUE + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + +>NAME +>VALUE + + + + + + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + +>NAME +>VALUE + + + + + + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + +>NAME +>VALUE + + + + + + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + +>NAME +>VALUE + + + + + + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + + +>NAME +>VALUE + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + + +>NAME +>VALUE + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + + +>NAME +>VALUE + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + +>NAME +>VALUE + + + + + + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + +>NAME +>VALUE + + + + + + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + + +>NAME +>VALUE + + +<b>SANYO OSCON Capacitor</b><p> +Source: e_os_all.pdf + + + + +>NAME +>VALUE + + +<b>SANYO OSCON Capacitor</b> SMD type with conductive polymer electrolyte<p> +Source: e_os_all.pdf + + + + + + + + + +>NAME +>VALUE + + + + + + + +<b>SANYO OSCON Capacitor</b> SMD type with conductive polymer electrolyte<p> +Source: e_os_all.pdf + + + + + + + + + +>NAME +>VALUE + + + + + + + +<b>SANYO OSCON Capacitor</b> SMD type with conductive polymer electrolyte<p> +Source: e_os_all.pdf + + + + + + + + + +>NAME +>VALUE + + + + + + + +<b>SANYO OSCON Capacitor</b> SMD type with conductive polymer electrolyte<p> +Source: e_os_all.pdf + + + + + + + + + +>NAME +>VALUE + + + + + + + +<b>SANYO OSCON Capacitor</b> SMD type with conductive polymer electrolyte<p> +Source: e_os_all.pdf + + + + + + + + + +>NAME +>VALUE + + + + + + + +<b>SANYO OSCON Capacitor</b> SMD type with conductive polymer electrolyte<p> +Source: e_os_all.pdf + + + + + + + + + +>NAME +>VALUE + + + + + + + +<b>SANYO OSCON Capacitor</b> SMD type with conductive polymer electrolyte<p> +Source: e_os_all.pdf + + + + + + + + + +>NAME +>VALUE + + + + + + + +<b>ALUMINUM ELECTROLYTIC CAPACITORS</b> UD Series 10 x 10 mm<p> +Source: http://products.nichicon.co.jp/en/pdf/XJA043/e-ud.pdf + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>ALUMINUM ELECTROLYTIC CAPACITORS</b> UD Series 4 x 5.8 mm<p> +Source: http://products.nichicon.co.jp/en/pdf/XJA043/e-ud.pdf + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>ALUMINUM ELECTROLYTIC CAPACITORS</b> UD Series 5 x 5.8 mm<p> +Source: http://products.nichicon.co.jp/en/pdf/XJA043/e-ud.pdf + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>ALUMINUM ELECTROLYTIC CAPACITORS</b> UD Series 6.3 x 5.8 mm<p> +Source: http://products.nichicon.co.jp/en/pdf/XJA043/e-ud.pdf + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>ALUMINUM ELECTROLYTIC CAPACITORS</b> UD Series 6.3 x 7.7 mm<p> +Source: http://products.nichicon.co.jp/en/pdf/XJA043/e-ud.pdf + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>ALUMINUM ELECTROLYTIC CAPACITORS</b> UD Series 8 x 10 mm<p> +Source: http://products.nichicon.co.jp/en/pdf/XJA043/e-ud.pdf + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +>NAME +>VALUE + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +<B>RESISTOR</B>, European symbol + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<B>CAPACITOR</B>, European symbol + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<B>POLARIZED CAPACITOR</B>, American symbol + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Voltage Regulators</b><p> +<author>Created by librarian@cadsoft.de</author> + + +<b>VOLTAGE REGULATOR</b> + + + + + + + + + +O +I +>NAME +>VALUE +A + + + + + + + + +>NAME +>VALUE +ADJ +IN +OUT + + + + + + + +<b>VOLTAGE REGULATOR</b> + + + + + + + + + + + + + + + + + + + +<b>Driver Arrays</b><p> +ULN and UDN Series<p> +<author>Created by librarian@cadsoft.de</author> + + +<b>Dual In Line Package</b> + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Small Outline Package</b> + + + + + + + + + + + + + + + + + + + + + + + + + + +>VALUE +>NAME + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + +<b>DRIVER ARRAY</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Supply Symbols</b><p> +GND, VCC, 0V, +5V, -5V, etc.<p> +Please keep in mind, that these devices are necessary for the +automatic wiring of the supply signals.<p> +The pin name defined in the symbol is identical to the net which is to be wired automatically.<p> +In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p> +<author>Created by librarian@cadsoft.de</author> + + + + + +>VALUE + + + + + + +>VALUE + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + + + +<b>AMP Connectors</b><p> +RJ45 Jack connectors<br> + Based on the previous libraris: + <ul> + <li>amp.lbr + <li>amp-j.lbr + <li>amp-mta.lbr + <li>amp-nlok.lbr + <li>amp-sim.lbr + <li>amp-micro-match.lbr + </ul> + Sources : + <ul> + <li>Catalog 82066 Revised 11-95 + <li>Product Guide 296785 Rev. 8-99 + <li>Product Guide CD-ROM 1999 + <li>www.amp.com + </ul> + <author>Created by librarian@cadsoft.de</author> + + +<b>AMP MTA connector</b> + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + +>NAME +>VALUE +1 + + + + + + +<b>AMP connector</b> + + + + + + + + + + + + + + + + + + +<h3>SparkFun Electronics' preferred foot prints</h3> +We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at www.sparkfun.com. +<br><br> +<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. + + +Full Arduino MEGA footprint + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +10 +11 +12 +13 +14 +15 +16 +17 +18 +19 +20 +21 +22 +24 +26 +28 +30 +32 +34 +36 +38 +40 +42 +44 +46 +50 +48 +52 +31 +33 +35 +37 +39 +41 +43 +45 +47 +49 +51 +53 +A0 +A1 +A2 +A3 +A4 +A5 +6 +A7 +A8 +A9 +A10 +A11 +A12 +A13 +A14 +A15 +ANALOG IN +COMMUNICATION +DIGITAL +GND +TX0 +RX0 +PWM +TX3 +RX3 +TX2 +RX2 +TX1 +RX1 +SDA +SCL +POWER +RESET +3.3V +5V +GND +GND +Vin +GND +AREF +5V + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Arduino Mega Pro footprint + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +10 +11 +12 +13 +14 +15 +16 +17 +18 +19 +20 +21 +22 +24 +26 +28 +30 +32 +34 +36 +38 +40 +42 +44 +46 +50 +48 +52 +31 +33 +35 +37 +39 +41 +43 +45 +47 +49 +51 +53 +A0 +A1 +A2 +A3 +A4 +A5 +6 +A7 +A8 +A9 +A10 +A11 +A12 +A13 +A14 +A15 +ANALOG IN +COMMUNICATION +DIGITAL +GND +TX0 +RX0 +PWM +TX3 +RX3 +TX2 +RX2 +TX1 +RX1 +SDA +SCL +POWER +RESET +3.3V +3.3V +GND +GND +Vin +GND +AREF +3.3 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>Value + + +<b>OMRON SWITCH</b> + + + + + + + + + + + + + + + + + + + + + + + + +>NAME + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. +You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). +This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" +to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. +Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, +if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment +will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + +>Name +>Value ++ +- +S +S + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + +>VALUE +>NAME + + + + + + + + +Arduino Mega footprint connections + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Momentary Switch</b> +Button commonly used for reset or general input. Spark Fun Electronics SKU : COM-00097 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Header 4</b> +Standard 4-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +DIR +GND +M+ +STEP +MOTOR +A +B +GND ++5V +GND +MS1 +SLP +PFD +RST +ENABLE +MS2 +PWR IN +>VALUE +>NAME + + + + + + + + + + +>VALUE +>NAME + + + + + + + + + + + + + + + + + + + + + +EasyDriver version 4.4 - http://www.schmalzhaus.com/EasyDriver + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Y MOTOR +SD SHIELD +X MOTOR +ROLLER MOTOR +Z1 MOTOR +Z2 MOTOR +CONN_HP_C6602A + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +